Two separate text areas for typing in two languages on the same page
Dear All,
I am trying to find a way to have two separate typing areas on a single page so that I can write a letter in both French and English. I can easily get two columns, one which follows another, but that is not what I want.
Any help would be greatly appreciated.
I am running Pages '09.
Thanks
Tunaman
What do you want then? Can you describe how you like to position the text?
In word processing document you can use layout breaks and column beaks to get two text columns beside each other.
You can also use text boxes, one for each language. You can even use Shapes as text boxes.
Similar Messages
-
My Iphone was changed because of broken down thanks to its warranty. I am from Turkey and I paid one time for my old Iphone to save. Can you give me a paper or document related to this phone was changed since it was broken down? I need IMEI numbers of two Iphones on the same page. Because I don't wanna save this Iphone again in my country. I paid one time for my old Iphone. If you give me a document, I don't need to save my Iphone5 and also I don't need to pay again to save in my country.
this forum is made up of users like you, not apple employees. We can not help you with that kind of request.
-
HOW TO PUT TWO PANNEL IN THE SAME PAGE
HI ALL
I NEED TO KNOW HOW TO PUT TWO PANNEL IN THE SAME PAGE TO FULLY UTILIZE FULL PAGE AREA BECAUSE THE PANNEL WIDTH IS TOO SMALL , SO I WANT TO MAKE THE PAPER CONTAIN TO PANNELS VERTICALLY.
THANK YOUSo Barb,
I like to use multiple desktops and move back and forth between then using gestures. At the moment I have 5 open: Chrome, Firefox, Safari, Photoshop CS 6 and a desktop. I use "gestures" to navigate between them:
Mac Basics: Multi-Touch gestures - Apple Support
and I use Mission Control (F3) to move the various desktops around in the order I want them.
Mac Basics: Mission Control - Apple Support
So say I'm searching for a photo to open in CS 6, I find it on the open desktop then hit select "open" in CS 6 and go to that folder in the select pane.
Even right now I'm typing this in Safari and "gesturing" back to Chrome where I did the search about multi touch and mission control. I drag copy the URL there and gestured back here to paste the URL into this text.
If you did a lot of photo searches, I set professional clients of mine in Chicago up with dual monitors (In this case you'd have an external monitor on extended desktop.). So all you need to do is just glance over at the second monitor slide your cursor over there open stuff up find your photo and go back to Photoshop and open it up.
Hope this helps. -
How do I put two galleries on the same page?
What's the "trick" to putting two galleries on the same page?
I've been experimenting, but it's not working out well. I have one working, but when I put the seond one on, all sorts of unexpected things happen. The first gallery goes up "over" the banner (it covers it??) and even though the sizes are spec'd the same, the second one shows up a lot larger as well.
It's very weird.
Any insight would be appreciated!
Thanks!
MichelleJuan,
When Application Express finds a validation error, the page rendering step is executed again in the same database process used for the validations. So the procedure wwv_flow.accept, which is doing your validations, calls wwv_flow.show (a PL/SQL call) and passes information about the validation errors to the show procedure so that error text can be merged into the page rendering process.
If you want to simulate this you might need to save validation info in collections and build the "show" part of the page so that it knows how to run in "validation-display" mode, i.e., to be able to use the collections.
Scott -
Two tables on the same page. Is it possible?
Hi all,
I followed the multi-slect sample in Winston's blog and everything is working. However, when I tried to put two tables on the same page, the selections are all messed up. When I looked at the code again I realized the line
RowKey rowKey = (RowKey)getValue("#{currentRow.tableRow}");
in the setSelected(Object object) method.
In the case that there are more than one tables on one page, how does the code which table it is refering to? Or how the code should be different so we can have multi tables with selectable rows on the same page? Thnx.Thanks. But how do you tie the TableSelectPhaseListeners to their respected tables.
This is Winston's code for row select (1 table)
private TableSelectPhaseListener tablePhaseListener = new TableSelectPhaseListener();
public void setSelected(Object object) {
RowKey rowKey = (RowKey)getValue("#{currentRow.tableRow}");
if (rowKey != null) {
tablePhaseListener.setSelected(rowKey, object);
public Object getSelected(){
RowKey rowKey = (RowKey)getValue("#{currentRow.tableRow}");
return tablePhaseListener.getSelected(rowKey);
public Object getSelectedValue() {
RowKey rowKey = (RowKey)getValue("#{currentRow.tableRow}");
return (rowKey != null) ? rowKey.getRowId() : null;
public boolean getSelectedState() {
RowKey rowKey = (RowKey)getValue("#{currentRow.tableRow}");
return tablePhaseListener.isSelected(rowKey);
For two tables. Do I just repeat the code like this?
private TableSelectPhaseListener tablePhaseListener1 = new TableSelectPhaseListener();
public void setSelected1(Object object) {
RowKey rowKey = (RowKey)getValue("#{currentRow.tableRow}");
if (rowKey != null) {
tablePhaseListener1.setSelected(rowKey, object);
public Object getSelected1(){
RowKey rowKey = (RowKey)getValue("#{currentRow.tableRow}");
return tablePhaseListener1.getSelected(rowKey);
public Object getSelectedValue1() {
RowKey rowKey = (RowKey)getValue("#{currentRow.tableRow}");
return (rowKey != null) ? rowKey.getRowId() : null;
public boolean getSelectedState1() {
RowKey rowKey = (RowKey)getValue("#{currentRow.tableRow}");
return tablePhaseListener1.isSelected(rowKey);
private TableSelectPhaseListener tablePhaseListener2 = new TableSelectPhaseListener();
public void setSelected2(Object object) {
RowKey rowKey = (RowKey)getValue("#{currentRow.tableRow}");
if (rowKey != null) {
tablePhaseListener2.setSelected(rowKey, object);
public Object getSelected()2{
RowKey rowKey = (RowKey)getValue("#{currentRow.tableRow}");
return tablePhaseListener2.getSelected(rowKey);
public Object getSelectedValue2() {
RowKey rowKey = (RowKey)getValue("#{currentRow.tableRow}");
return (rowKey != null) ? rowKey.getRowId() : null;
public boolean getSelectedState2() {
RowKey rowKey = (RowKey)getValue("#{currentRow.tableRow}");
return tablePhaseListener2.isSelected(rowKey);
Edited by: Thomas5 on Jan 18, 2008 5:28 AM -
hi
i have created two iviews in the same page based on the two jspdynpage components.
i am displaying a tableview on the ist view..on on cell click i hav to pass an the value in the cell(of ist view) to the second view...
how do i call the second view with passing this argument...
please tell the code to proceed .
looking forward for ur response.
thanks
bidyut duttaTry this code and let me know the results.
EPCF1.java(producer of event)
===============================
package com.epcf;
import com.sapportals.htmlb.page.DynPage;
import com.sapportals.htmlb.page.PageException;
import com.sapportals.portal.htmlb.page.JSPDynPage;
import com.sapportals.portal.htmlb.page.PageProcessorComponent ;
public class EPCF1 extends PageProcessorComponent {
public DynPage getPage(){
return new EPCF1DynPage();
public static class EPCF1DynPage extends JSPDynPage{
public void doInitialization(){
public void doProcessAfterInput() throws PageException {
public void doProcessBeforeOutput() throws PageException {
this.setJspName("EPCFProducer.jsp");
EPCF2.java(consumer of the event)
===================================
package com.epcf;
import com.sapportals.htmlb.page.DynPage;
import com.sapportals.htmlb.page.PageException;
import com.sapportals.portal.htmlb.page.JSPDynPage;
import com.sapportals.portal.htmlb.page.PageProcessorComponent ;
public class EPCF2 extends PageProcessorComponent {
public DynPage getPage(){
return new EPCF2DynPage();
public static class EPCF2DynPage extends JSPDynPage{
public void doInitialization(){
public void doProcessAfterInput() throws PageException {
public void doProcessBeforeOutput() throws PageException {
this.setJspName("EPCFConsumer.jsp");
EPCFProducer.jsp
================
<%@ taglib uri = "tagLib" prefix = "hbj" %>
<hbj:content id="myContext" >
<hbj:page title="PageTitle">
<script>
function buttonClick()
var name = 'hi';
alert('hi');
EPCM.raiseEvent("urn:com.epcf.EPCFProducer", "clickEvent", name);
alert('hi');
</script>
<hbj:form id="myFormId" >
<hbj:button
id="myButton"
text="click"
width="125px"
tooltip="click here"
onClientClick="JavaScript:buttonClick();"
/>
</hbj:form>
</hbj:page>
</hbj:content>
EPCFConsumer.jsp
=================
<%@ taglib uri = "tagLib" prefix = "hbj" %>
<hbj:content id="myContext" >
<hbj:page title="PageTitle">
<script>
function eventHandler(event)
myFormId.data.value=event.dataObject;
EPCM.subscribeEvent("urn:com.epcf.EPCFProducer", "clickEvent", eventHandler);
</script>
<form id="myFormId" >
The string passed is:
<input type="text" value="" name="data"/>
</form>
</hbj:page>
</hbj:content>
portalapp.xml
================
<?xml version="1.0" encoding="utf-8"?>
<application>
<application-config>
<property name="SharingReference" value="com.sap.portal.htmlb"/>
</application-config>
<components>
<component name="EPCF1">
<component-config>
<property name="ClassName" value="com.epcf.EPCF1"/>
</component-config>
<component-profile>
<property name="tagLib" value="/SERVICE/htmlb/taglib/htmlb.tld"/>
</component-profile>
</component>
<component name="EPCF2">
<component-config>
<property name="ClassName" value="com.epcf.EPCF2"/>
</component-config>
<component-profile>
<property name="tagLib" value="/SERVICE/htmlb/taglib/htmlb.tld"/>
</component-profile>
</component>
</components>
<services/>
</application> -
can I create a separate icloud account for my husband but still use the same itunes account? I want our contacts, photos and storage capacity to be separate but be able to share music and apps we purchase.
Welcome to the Apple community Pammy.
Yes, that's exactly what I'd suggest for the vast majority of users. -
To create an application with a master and two details in the same page
How I make to create an application contend a form master with two forms details in the same page?
Tomaz
Message was edited by:
user517841Hi,
You do not need to mount a screen. Just add a new region with several text fields inside. You should fetch a row by a process and populate the set when you load the page or click on a button. Insert, update, and delete should be done by processes. You have to have Next and Previous buttons to brows trough all rows of the detail table.
The most important thing here is what the connections between tables in your database are.
If they are the "One to many, One to one" you can use the approach described above.
If they are "One to many, One to many" will be better to use buttons or links to lunch details' tables in separate forms.
If the second and third tables are connected only to the master table you can use two buttons at the right of every master row. Clicking on the buttons will bring separate form for each detail table.
If the third table is just a luckup table to the second one you can use "Select List" field into tabular form of the second table in one Master-Detail form.
Konstantin
[email protected] -
How to create a field in an OAF page which sums two fields in the same page.
Hi,
In the HRMS appraisal page, I have two fields in different regions.
1. One field shows the total score of the competencies.
2. Another field shows the total scores of the objectives.
The problem with the appraisal total score is it returns only the rating level id. (It does not take decimal values)
Hence I want to add the above two fields which is displayed in the same page and show as a new field in the top of the page as the final appraisal score.
[Something similar to what is mentioned in the metalink document 1315431.1 ]
We are in 11.5.10.2.
I am new to OAF and have no idea as to how to achieve the above step. Can anyone guide me in doing it?
regardsHi,
Went through the steps to do a VO substitution.
But normally in all the examples given the page will belong to the application where we are modifying.
Eg. in this case the "about this page" shows /oracle/apps/fnd/wf/worklist/webui/NotifDetailsPG
This is coming under fnd top where all the appraisal VOs and other pages comes under PER_TOP.
Should I bring all the files from FND_TOP of the server to my PC where jdev is installed.
I have already taken all the files under $PER_TOP to my PC.
regards -
Apple TV plays two languages at the same time!
Hello,
I ripped some of my DVDs using handbrake. I added two language tracks (original language + my mother tongue).
After adding meta data with subler i also checked both language tracks at subler so they will both appear in itunes.
Everything works fine when i watch the movie on my computer, i can perfectly switch languages in the settings menu.
But wen i stream it to my apple tv (i use itunes on my computer at chose apple tv as streaming device/airplay instead of browsing with the apple tv directly)
it will play both languages at the same time! no matter if i chose a language in itunes or not, it always plays both languages.
Did anyone else have this problem?
Or even a solution?When an apple tv and an airport express are connected at the same time and the apple tv is powered on, the itunes multiple speakers feature will show both the express and the apple tv. you can select either, or both using the multiple speakers option.
-
Two animations on the same page Html5 canvas (flash cc)
Hi all,
I have been using Flash CC to create some nice html5 animations and I am really enjoying it. However I wanted to add more than one animation to the same page. I have managed to get two animations running on the same page, but I am having some issues whereby only one of the animations load the supported images where as the second one does not. I have pasted my code below, any help would be gratefully received. In the long term I want to add many animations to the same page, so would appreciate some help on how this can be done more efficiently. Many thanks in advance.
<!DOCTYPE html>
<html>
<head>
<meta charset="UTF-8">
<title>animation test</title>
<script src="http://code.createjs.com/easeljs-0.7.0.min.js"></script>
<script src="http://code.createjs.com/tweenjs-0.5.0.min.js"></script>
<script src="http://code.createjs.com/movieclip-0.7.0.min.js"></script>
<script src="http://code.createjs.com/preloadjs-0.4.0.min.js"></script>
<script src="animation-three.js"></script>
<script src="chart-animation.js"></script>
<script>
var canvas, stage, exportRoot;
function init() {
canvas = document.getElementById("graph");
canvas = document.getElementById("piechart");
images = images||{};
var loader = new createjs.LoadQueue(false);
loader.addEventListener("fileload", handleFileLoad);
loader.addEventListener("complete", handleComplete);
loader.loadManifest(lib.properties.manifest);
function handleFileLoad(evt) {
if (evt.item.type == "image") { images[evt.item.id] = evt.result; }
function handleComplete() {
exportRoot = new lib.animationthree();
stage = new createjs.Stage(graph);
stage.addChild(exportRoot);
stage.update();
createjs.Ticker.setFPS(30);
createjs.Ticker.addEventListener("tick", stage);
exportRoot = new lib.chartanimation();
stage = new createjs.Stage(piechart);
stage.addChild(exportRoot);
stage.update();
createjs.Ticker.setFPS(30);
createjs.Ticker.addEventListener("tick", stage);
</script>
</head>
<body onload="init();" style="background-color:#D4D4D4">
<canvas id="graph" width="530" height="410" style="background-color:#FFFFFF"></canvas>
<canvas id="piechart" width="530" height="410" style="background-color:#FFFFFF"></canvas>
</body>
</html>Hi all,
I have been using Flash CC to create some nice html5 animations and I am really enjoying it. However I wanted to add more than one animation to the same page. I have managed to get two animations running on the same page, but I am having some issues whereby only one of the animations load the supported images where as the second one does not. I have pasted my code below, any help would be gratefully received. In the long term I want to add many animations to the same page, so would appreciate some help on how this can be done more efficiently. Many thanks in advance.
<!DOCTYPE html>
<html>
<head>
<meta charset="UTF-8">
<title>animation test</title>
<script src="http://code.createjs.com/easeljs-0.7.0.min.js"></script>
<script src="http://code.createjs.com/tweenjs-0.5.0.min.js"></script>
<script src="http://code.createjs.com/movieclip-0.7.0.min.js"></script>
<script src="http://code.createjs.com/preloadjs-0.4.0.min.js"></script>
<script src="animation-three.js"></script>
<script src="chart-animation.js"></script>
<script>
var canvas, stage, exportRoot;
function init() {
canvas = document.getElementById("graph");
canvas = document.getElementById("piechart");
images = images||{};
var loader = new createjs.LoadQueue(false);
loader.addEventListener("fileload", handleFileLoad);
loader.addEventListener("complete", handleComplete);
loader.loadManifest(lib.properties.manifest);
function handleFileLoad(evt) {
if (evt.item.type == "image") { images[evt.item.id] = evt.result; }
function handleComplete() {
exportRoot = new lib.animationthree();
stage = new createjs.Stage(graph);
stage.addChild(exportRoot);
stage.update();
createjs.Ticker.setFPS(30);
createjs.Ticker.addEventListener("tick", stage);
exportRoot = new lib.chartanimation();
stage = new createjs.Stage(piechart);
stage.addChild(exportRoot);
stage.update();
createjs.Ticker.setFPS(30);
createjs.Ticker.addEventListener("tick", stage);
</script>
</head>
<body onload="init();" style="background-color:#D4D4D4">
<canvas id="graph" width="530" height="410" style="background-color:#FFFFFF"></canvas>
<canvas id="piechart" width="530" height="410" style="background-color:#FFFFFF"></canvas>
</body>
</html> -
Putting two webcams on the same page
Hi there,
For a two-person video chat room, what does it take to place two webcam objects where one shows the webcam that displays the person you're talking to and the other webcam displays yourself? It's like Skype where there are two cameras showing the person you're talking to and also yourself.
Thanks,
Kevin (newbie to AFCS)Hi Kevin,
All you need is two Webcamsubscribers and a WebcamPublisher object. WebcamSubscriber shows the video streams . By default, it shows all user video streams in a grid structure. But if you set publisherIDs property( by default its null) to the userIDs of the selected user videos you want to show , it will show only those user videos.
For your case, lets say you want to see yourself in a small window and other person in a large window. You can have one webcamsubscriber have publisherIDs property set your user ID and the other one has publisherIDs set to the other person's userID. Then you can make the size and placement of both these websubscribers as per what layout you want e.g. the one showing you is small and in one corner, while the other one takes the full screen.
The example WebCamera in sampleApps folder illustrates the use of multiple webcamsubscribers to have one such layout. Please go through that example and also read the API doc for publisherIDs. Please let us know about any issues you have.
Hope this helps
Thanks
Hironmay Basu -
There is confusional data when two terminal get the same page?
Hi,All
The page has a textfield for inputing qualification, a button for performing query (invoking Ejb's method) and a table for putting data.
If two terminal invoke the page at the same time,then the second terminal show the same qualification and data at first.
When saving one after the other,two terminal have mistake.but, only one terminal,that's right.
I need your help!
Thanks
SmileJSF version 1.1 uses the pathinfo of the URL to identify a page (/Home.jsp for example) and creates one component tree per page. You can implement an own window management or change to another JSF version. I don't know if JSC actually supports JSF 1.2.
-
im trying to set up my iphone and dont want stuff from my ipod..... is iy possible to make another itunes account just for my iphone and keep it on the same computer? please help thanks
You can use one iTunes account as it sees each device separetly. I have my iPod, iPad, and iPhone all on one iTunes account without any problems.
-
Hi,
is it so that there can be only one js tree per page ? If so, is there a workaround ?
When I tried to put a second tree on a page, only empty region is showing. In the page source code,
it seems that the data for the second tree includes nodes from the first tree, althought they surely are
not included in the query for the second tree.
TiinaHi!
I want to up this topic. I use Firefox 3.5.11 and I've made an example on apex.oracle.com (APEX 4.0.1.00.03, Oracle DB 11.1.0.7.0 EE) where you can see the trouble here: http://apex.oracle.com/pls/otn/f?p=2092:5:0. There are two regions with trees on the page. First one has the following tree query:
select case when connect_by_isleaf = 1 then 0
when level = 1 then 1
else -1
end as status,
level,
"ENAME" as title,
null as icon,
"EMPNO" as value,
null as tooltip,
null as link
from "#OWNER#"."EMP"
start with "MGR" is null
connect by prior "EMPNO" = "MGR"
order siblings by "ENAME"Second one has this tree query:
select case when connect_by_isleaf = 1 then 0
when level = 1 then 1
else -1
end as status,
level,
level as title,
null as icon,
level as value,
null as tooltip,
null as link
from dual
connect by level <= 5So you can see from the code, the second tree should only contain the numbers. But please follow the link above and expand the second tree - it contains the first tree nodes!
I think it's a bug. Any other thoughts / workarounds, please?
Edited by: tiPPLer on 26.08.2010 13:55
Maybe you are looking for
-
Update Parked Non PO invoice - FBV2 functionality via BAPI or FM not BDC
Good day all, after searching many days, I have found many threads similar to this request but none have been properly answers. My scenario: I need to change a header field (ZUONR) and account assignment related fields (KOSTL, AUFNR, etc) in the doc
-
During installation of itunes using Windows 7 64-bit, I have this error come up every time during installation. "An Error occured during intstallation of Assembly "Microsoft .VC80.CRT type="win32". version="8.0.50727,6195", public Key Token="1fc8b3b
-
I know 250MB of wifi is, well, practially none. So I was wondering if I was at my own home, as I already have wifi, could I simply use the wifi I alreadyhave, and use the wifi from the plan when I'm away from home and not using my already purchased
-
Problems with Zen Touch on Windows Vista (64-B
When I connect my Zen Touch to the PC Vista can't find drivers so it tries to install the MTP-Driver but the classinstallationprogram have declined the installation. http://img80.imageshack.us/img80/8555/errorhx5.jpg (sorry, it's in german) How can I
-
Deployed Baseline Not Using Latest Config Item Revision
I have made sure that the baseline is set to use latest revision, and even redeployed the baseline to some test machines, but they all still show and old revision. I have deployed another baseline with the same behavior. In both cases the initial rev