Two shipments getting created by one delivery

Hi,
I have a problem in which 2 shipments are getting created for one Delivery document, whereas only 1 Shipment document should be there. When I analysed the shipment documents, I found that the shipment route and forwarding agent are different in both the documents.
Any idea why this is happening? Also, want to know-
1. Is it possible to combine deliveries of different Routes and Fwd agents into one shipment document (VT01N) ?
Thanks.

hello, friend.
it is possible to have 2 or more routes and 2 or more agents in a collective shipment.  in this case, there is a main route and the sub-routes become stages.  it is possible that each stage could have a different agent.
in your case as originally stated, you may not combine more than 1 route or agent in an individual shipment.  if your items in the delivery document have different routes or agents, then these items will be split into different shipments.
regards.

Similar Messages

  • ME2O - Two deliveries getting created !!!

    Hi,
    I have referred the previous posts on this topic. But couldn't get a satisfactory answer.
    Re: Subcontracting Delivery (LB) split through ME2O
    Scenario :- When I run ME2O (1 header and 10 components) system creates two deliveries SOMETIMES. This happens once in a while only. With the same set of data, I have tried creating later on, it created only one delivery !!! Seems, there is no logic in delivery split.
    All the below conditions are correct
    a) Based on delivery date
    b) Shipping Point
    c) Shipping Condition
    d) Delivery Type
    e) Loading group
    f) Route (we are not using route determination)
    Does anybody have a clue on this?
    The only thing which is different in two deliveries is the 'Weight group'. But with this also system is not creating 2 deliveries always. It creates only sometimes.......

    the requirement date is probably different.

  • Two idocs are created for one output message type

    hi all,
    we are communicating our sap idocs to external system using ALE.It is working smoothly.
    Our problem raises here,
    .idocs are creating at the time of output type attachment for purchase orders.But rarely,two idocs are creating for one message type.It means two idocs are created for same Purchase order.It makes complications for the external system.
    anyone can help me pls?
    thnks in advance..........

    thanks jurgen for ur reply,
    jurgen, the second idoc is not an "ORDCHG",It is the replica of first idoc.This one has also "ORDERS" message type.The only difference between these idocs are the time.It means the difference between the time field segments of these idocs have only three(3)seconds difference.We think that its from the system error.If it is not from the system error pls give me the explanation.
    thanks in advance.......

  • IDOCS get created  After one day?

    Hello all,
    the outbound idocs are get created after one day delay,
    After uploading the materials the idocs have to generated through program RBDMIDOC and need to be posted immediately .
    RBDMIDOC-scheduled at 10 mints .
    but in our scenario the idocs are generated after one day delay..
    what could be the reason?.
    it's urgent .
    Warm regards
    Nandan
    Edited by: Nandan ND on Feb 19, 2008 12:47 PM
    Edited by: Nandan ND on Feb 19, 2008 1:35 PM
    Edited by: Nandan ND on Feb 19, 2008 1:36 PM

    Hi,
    Check whether program   RBDMIDOC is scheduled only once? If it is running only once then you this will happen.
    And also schedule the job to execute only after your upload process is over.
    Regards,
    Ashok

  • System should create only one delivery for 100 different PO's in STO

    Hi All
    i need help
    Plant B raising 100 different po's daily for different materials to Plant A.(STO)
    Now Plant A will do Dilivery via VL10B.
    Here my requirement is system should create only one delivery for 100 different PO's and delivery should contain all the
    materials as line items bcause system should not create 100 deliveries( time consuming process).
    Here there is no manual transaction for VL10B.
    That is system is goining to excecute the VL10B automatically, there is no manual transation for VL10B
    How can we do this?
    Thanks
    MSK

    Hi
    We can able to do your requirement
    1. All the STO materials should have same sales view in materials for the *Unique)following field: Loading group, shipping Point, so on..
    2. In the config, hope we have do the combine delivery setting for VL10B
    Regards
    Prasanna
    Edited by: Prasanna Raju on Feb 17, 2010 1:52 PM

  • In partial delivery, what does it mean by Create only one delivery (also with qty = 0)?

    Hi Expert,
    I would like to ask
    "Create only one delivery (also with qty = 0)"
    It is mentioned in Partial Delivery
    The following partial delivery agreements exist:
    A Create a delivery with qty greater than zero
    B Create only one delivery (also with qty = 0)
    C Only complete delivery allowed
    D No limit to subsequent deliveries
    Please provide example together.
    Many thanks.
    Rgds,
    Ong

    Dear Lit Yit Ong
    The use of  B is Creating  only one delivery (also with quantity = 0) Same like as indicator A, only the difference is we can create a delivery with zero qty also.
    Regards
    venu Gopal reddy

  • TWO INVOICE CREATED AGAINST ONE DELIVERY T-CODE VF01

    Hi,
    I got strange scenario that against one delivery containing multiple line items two different  invoice created during normal sales process , First  invoice with some line item and another invoice contains rest of the item.
    Both the invoices is of same billing type.
    We want one invoice against the delivery.
    Help to resolve the problem
    Thanks in advance for your valuable time and effort
    Regards
    Praveen

    Hello,
    please run  VF03 to display one billing document, then by menu Environment > Split analysis it is possible to see the cause of the split.
    Best regards,
    Ivano.

  • Two different invoices created for  one order for two different lines

    Hi All,
    I have an order with four line items that was shipped on the same day, invoiced on the same day and all lines have the same delivery number yet two inovices were created for this order..one for the first three lines and one for the last line.
    Can anyone please explain what can cause this to happen?
    Thanks
    A/A

    Hi Asgar,
    If a single order has been split into two invoices, you should check the values of the mandatory columns. During Autoinvoice, the grouping is based on the madatory columns and also your grouping rules. If any of the mandatory column has a different value, it will split into different invoice.
    Please refer the following metalink note for further details
    Subject: How Autoinvoice Grouping Works
    Doc ID: 98772.1
    Hope that helps.
    Thanks,
    Anil

  • Delivery get created with one line item from sale ord having two line item

    I have an issue when delivery is created with reference to a sales order.
    The sale order consist of a header with customer group VBKD-KDGRP = '01'. There are two line item for this header with item 10 having customer group '01' and line item '20' having customer group '02'.
    When delivery is created with reference to this sale order the delivery contains only one line item corresponding to line item 10 having customer group '01' of the sale order. But I need to have both the line item in the delivery irrespective of difference in customer group.
    What makes this split up of delivery? Is there any configuration or user exit that need to be applied in order to adress this.
    <REMOVED BY MODERATOR>
    Thanks in advance
    Ramachandran Babu
    Edited by: Alvaro Tejada Galindo on Jun 13, 2008 5:45 PM

    Check if there is any copy routine applied in the copy control from order to delivery - transaction VTLA. The routines themselves can be found in transaction VOFM (Data transfer -> Deliveries). LIKP-ZUKRL field contains the split criteria (by the way, check what's in that field on your deliveries).
    It's possible that there is something in the current routine that is forcing the delivery split. Otherwise you can probably use similar approach to make it stop splitting.
    Hope this helps.

  • Two report instances created by one recurring scheduled instance

    I have one scheduled recurring report  instance that looks to be creating two seperate successful completed instances when it runs daily.  There is only one report file and one recurring instance but each completed instance has seperate titles.  How can one be removed / deleted?  Or, is there some way to id how / where the second instance is be created?

    Moved to businessobjects Forum

  • Multiple shipments for one delivery?

    Hi,
    Can multiple shipments be assigned to one delivery in standard SAP?
    Regards,
    Siddharth.

    hello, friend.
    there are at least 2 ways of looking at your situation:
    1.  you can use just one delivery document for many shipments (control will be outside of SAP and will require strict monitoring), or
    2.  if you are implementing LE-Transportation as well, you most likely will have to do "delivery split" so that one delivery can be broken up into as many deliveries as you need, where one delivery equals one shipment.
    which of the above will be applicable for your needs?
    regards.

  • Can't combine Sales Orders into One Delivery

    A customer has started sending us 850's for their products.  Each 850 creates a new Sales Order from the ORDERS IDoc.
    We can not combine two different Sales Orders into one Delivery even if all the data is identical other than the Order Number itself.  The Error Message is VL067.
    The log reveals that the only data difference is the Address number.  Each time a new Sales Order is built SAP creates a new Address Number even though the customer is the same, and then it won't let you combine those two Sales Orders into one Delivery because the Adderss Number is different.
    We either need to make SAP stop creating a new Address for the same Customer, or we need to make SAP ignore the difference in Address Number when combining them into one Delivery.
    Any ideas?

    Hello Shiva,
    My apologies - I am too focused and forgot to say thank you for your tip.  I appreciate your time.
    I have discovered that the address check is only made if the value of ADRDA in VBPA is B or E, which both mean that the address was manually entered - actually, it came in via IDoc.
    Does anyone know how to control that value so it is not B or E?
    Thanks in advance.

  • One delivery for multiple STO's

    Folks,
    I have multiple STO's for the same ship-to (plant). Items due for shipping would need to be combined into 1 delivery and not 1 delivery per STO.
    Would this be possible? And if yes, how?
    Thanks,
    MZ

    Hi ,
    Yes , We can create one delivery for multiple PO's .
    Go to VL10D tcode --> Purchase order tab -- > enter the STO's and press execute
    Select the STO's and click on background tab. Then it creates the log
    Select the item again and press shift +F4
    It will gives the log inforamation for the STO's and select the item and press on documents tab.
    It will creates only one Delivery for all the STO's.
    Now go to VL02N tcode and enter the delivery number then goto picking tab then enter picking qnty = delivery qnty
    then press on " post goods issue "
    Now go to MIGO to do the goods reciept then enter all the STO's here and check the item then save .
    Only one document will be posted for all the STO's
    Regards,
    Usha.

  • Cannot PGI one delivery in a shipment( getting runtime error )

    Dear all,
    I am not able to PGI one delivery in a shipment out of three deliveries. While PGIg I am getting a run time error saying that "cannot calculate percent for the material for this line item". I checked the condition values for that material in the standard order. Values are defined as well.The material also has serial number defined in the packing list. Transfer order is also complete. Not able to identify the reason of getting the error.
    Please advise on this above issue.
    Regards,

    Based on your description, the business process differs to our company. Our company completes the delivery with the PGI and then it creates the shipment. It is required to PGI the delivery before it creates the shipment.
    Ok, now what I am understanding is that you have created a shipment with three deliveries and are now trying to PGI the delivery. Questions to ask are: Are there limits to the shipment in terms of quantity? Are the materials the same for all three deliveries? Is the material new and has all relevant information being set up in master? I'm not sure that the percent question is related to the pricing conditions, but it may be related to the percent in terms of the its ratio to the entire shipment. In other words, what percent of the shipment does that one delivery make up?

  • Can we make two shipment cost for one outbound delivery

    Hi team,
    Can we make two shipment cost for one outbound delivery?
    Need your suggesstions.
    Regards
    Venkat Ramana

    Hi
    I do not think that you will get a reply now as it has been too long.
    Maybe the answer is not known.
    However as the forum is growing and it takes so much time to get through all of the pages it would be nice to keep it current so could you please close your thread and either re-open a new one (this might help as people are more likely to look at curret ones) or try another forum.
    This will make life easier for everyone
    Regards
    Frenchy.

Maybe you are looking for

  • Checkin file using custom service

    Hi All, I am using Oracle UCM 11g. I am creating the Service handler for new custom service. As part of this, I am checkin the new file in UCM using CHECKIN_NEW service. But while providing the Primary file information in Binder, it gives the followi

  • Quick Selection messing up!! NEED HELP!!

    On the quick selection tool when i click on the photo it just lags for a second then does everything by itself and not what I want!!

  • How do i switch information and phone number when they both say no service

    how do i switch information and phone number when they both say no service

  • IPhoto + Photoshop how to sort /use both (workflow needed)

    Hello, I love IPhoto for viewing and Photoshop CS2 for editing. However it seems since Iphoto will only import photos into the IPhoto library I have a problem with control over the folders and files. How are other people using the two together? For e

  • Possible to do screen viewing?

    Is it possible to use iChat (or any other app that Macs come with) to do not only video conferencing, but to share the contents of a screen (such as a presentation or software product demo) with others? Thanks in advance...