Two SID installation a single machine???

Hello,
it's possible to install a single 2 system with the same SID on a machine??? (ECC 6.0, oracle 10,win 2003)
Thank you!

Hi,
Two system on single machine with same SID is not possible.
you have to use different SID to install two system on single machine.
check Note 28392 - Two R/3 Systems on one Windows NT Server
regards,
kaushal

Similar Messages

Issue with two SID installation in a Single Windows 2003 Server.

Hi,
When I install second installation in a same single machine where already One SID installed, first one is goes down.
But Database is working fine.....
Disp+Work.exe status first it goes to Yellow then goes down..
Kernal of First installation is already updated.
Disp+Work.exe ---> Develeoper_Trc detail is following..
trc file: "dev_disp", trc level: 1, release: "700"
sysno      01
sid        TRN
systemid   562 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    159
intno      20050900
make:      multithreaded, Unicode, 64 bit, optimized
pid        6360
Thu Oct 30 16:22:26 2008
kernel runs with dp version 237000(ext=110000) (@(#) DPLIB-INT-VERSION-237000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 6360) [dpxxdisp.c   1254]
     shared lib "dw_xml.dll" version 159 successfully loaded
     shared lib "dw_xtc.dll" version 159 successfully loaded
     shared lib "dw_stl.dll" version 159 successfully loaded
     shared lib "dw_gui.dll" version 159 successfully loaded
     shared lib "dw_mdm.dll" version 159 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Thu Oct 30 16:22:31 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5403]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >ides_TRN_01                             <
DpShMCreate: sizeof(wp_adm)          21008     (1616)
DpShMCreate: sizeof(tm_adm)          5912624     (29416)
DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm)          552080     (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)          0     (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1864)
DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 000000000EF60050, size: 6604928)
DpShMCreate: allocated sys_adm at 000000000EF60050
DpShMCreate: allocated wp_adm at 000000000EF62150
DpShMCreate: allocated tm_adm_list at 000000000EF67360
DpShMCreate: allocated tm_adm at 000000000EF673C0
DpShMCreate: allocated wp_ca_adm at 000000000F50ABF0
DpShMCreate: allocated appc_ca_adm at 000000000F5109B0
DpShMCreate: allocated comm_adm at 000000000F5128F0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000F599580
DpShMCreate: allocated gw_adm at 000000000F599600
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000F599630
DpShMCreate: allocated wall_adm at 000000000F599640
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 6764
argv[0] = E:\usr\sap\TRN\DVEBMGS01\exe\jcontrol.EXE
argv[1] = E:\usr\sap\TRN\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=E:\usr\sap\TRN\SYS\profile\TRN_DVEBMGS01_ides
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64999
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=TRN
argv[7] = -DSAPMYNAME=ides_TRN_01
argv[8] = -DSAPPROFILE=E:\usr\sap\TRN\SYS\profile\TRN_DVEBMGS01_ides
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1656]
***LOG Q0K=> DpMsAttach, mscon ( ides) [dpxxdisp.c   11937]
DpStartStopMsg: send start message (myname is >ides_TRN_01                             <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 159
Release check o.K.
DpJ2eeLogin: j2ee state = CONNECTED
Thu Oct 30 16:22:36 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 5 / sock 292
    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:4516) [nixxi.cpp    4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=6764)
ERROR => DpProcKill: kill failed [dpntdisp.c   371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu Oct 30 16:23:11 2008
my types changed after wp death/restart 0xbf --> 0xbe
my types changed after wp death/restart 0xbe --> 0xbc
my types changed after wp death/restart 0xbc --> 0xb8
my types changed after wp death/restart 0xb8 --> 0xb0
my types changed after wp death/restart 0xb0 --> 0xa0
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:21 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long)               Thu Oct 30 10:53:21 2008
========================
No Ty. Pid      Status Cause Start Err Sem CPU    Time Program          Cl User         Action                    Table
0 DIA     6800 Ended         no      1   0        0
1 DIA     6796 Ended         no      1   0        0
2 DIA     6760 Ended         no      1   0        0
3 DIA     6772 Ended         no      1   0        0
4 DIA     6896 Ended         no      1   0        0
5 DIA     6848 Ended         no      1   0        0
6 UPD     6860 Ended         no      1   0        0
7 ENQ     6784 Ended         no      1   0        0
8 BTC     6864 Ended         no      1   0        0
9 BTC     6892 Ended         no      1   0        0
10 BTC     6924 Ended         no      1   0        0
11 SPO     6928 Ended         no      1   0        0
12 UP2     6908 Ended         no      1   0        0
Dispatcher Queue Statistics               Thu Oct 30 10:53:21 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
5
5
--------++++--
+
DIA
6
6
2000
6
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id          13
wake_evt_udp_now     0
wake events           total     8, udp     6 ( 75%), shm     2 ( 25%)
since last update     total     8, udp     6 ( 75%), shm     2 ( 25%)
Dump of tm_adm structure:               Thu Oct 30 10:53:21 2008
=========================
Term    uid man user    term   lastop mod wp ta   a/i (modes)
RM-T13, U14,                 , gokul_ggn, 16:22:40, M0, W-1,     , 1/0
Workprocess Comm. Area Blocks               Thu Oct 30 10:53:21 2008
=============================
Slots: 300, Used: 2, Max: 1
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
1
DISPATCHER
-1
WPCAAD001
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:26 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >ides_TRN_01                             < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (6752) (SOFT_KILL)
Stop icman
killing process (6700) (SOFT_KILL)
Terminate gui connections
send SHUTDOWN to REM TM 13
blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/13
LOCK WP ca_blk 2
return errno (-17) to T13
errormsg without overhead: take mode 0
NiBufIAlloc: malloc NiBufadm, to 0 bytes
try to send 14 to M0
NiBufSend starting
NiIWrite: hdl 5 sent data (wrt=14,pac=1,MESG_IO)
REL WP ca_blk 2
set status of T13 to TM_DISCONNECTED
NiBufISelUpdate: new MODE -- (r-) for hdl 5 in set0
SiSelNSet: set events of sock 292 to: ---
NiBufISelRemove: remove hdl 5 from set0
SiSelNRemove: removed sock 292 (pos=2)
SiSelNRemove: removed sock 292
NiSelIRemove: removed hdl 5
DpDelSocketInfo: del info for socket 5 (type=3)
NiICloseHandle: shutdown and close hdl 5 / sock 292
NiBufIClose: clear extension for hdl 5
dp_tm_adm[13].stat = DP_SLOT_FREE
DpGetSchedule: next schedule 1225364011/669000
DpGetSchedule: no schedule found
DpITmSlotRelease: release slot 13
DpListInsert: insert elem 13 into tmadm_free_list (at begin)
DpListInsert: 188 elems in tmadm_free_list
DpListRemove: remove elem 13 from tmadm_inuse_list
DpListRemove: 13 elems in tmadm_inuse_list
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:6752 HANDLE:404)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:27 2008
NiISelect: TIMEOUT occured (1000ms)
Thu Oct 30 16:23:28 2008
[DpProcDied] Process died (PID:6752 HANDLE:404)
wait for end of icman
[DpProcDied] Process lives (PID:6700 HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:29 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6700 HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:30 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6700 HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:31 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6700 HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:32 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6700 HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:33 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6700 HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:34 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6700 HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:35 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6700 HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:36 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6700 HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:37 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6700 HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:38 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:6700 HANDLE:412)
[DpProcDied] Process died (PID:6764 HANDLE:388)
DpStartStopMsg: send stop message (myname is >ides_TRN_01                             <)
NiIMyHostName: hostname = 'ides'
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name                    -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name           MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 3 (r)
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Thu Oct 30 16:23:39 2008
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   12283]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 332 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 332 (pos=3)
SiSelNRemove: removed sock 332
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/13
LOCK WP ca_blk 2
make DISP owner of wp_ca_blk 2
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 16)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 332
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 6360) [dpxxdisp.c   10484]
Good Bye .....
Please help out.
Thanks in Advance.
Regards,
Gokul Cahndola

Yes Finally I Got the solution.
please check
>r3trans -d   To Check Conectivity between Apps and DB Server.
If 000 then its OK- mean connectivity is OK, in this case all work.
when I was installing Second system then tnsname.ora and listner file was creating and privios system entry was removed. DUE to that reasion First one goes down.
Solution:- Both system entry should be Listner and tnsname file. Then Both server will work.
**********THANKS TO "AC"**************
Regards,
Gokul Chandola

Two SAP installation in one machine

Dear Experts
SAP ECC6 EHP4 READY
DB2
HP-UX
i have a requirment to install DEV and QAS server in single server. i already installed the DEV server. now i need to install the QAS server my query is what the prerequisite i need to fallow before starting the QAS server installation. and i there any file which need to be modifi. ITS my first time to work on this kind of landscape. kindly guide me.
i have the below file system.
/sapmnt/DEV
/db2/DEV/sapdata1
/db2/DEV/sapdata2
/db2/DEV/sapdata3
/db2/DEV/sapdata4
/db2/DEV/saptemp1
/db2/DEV/db2dump
/db2/DEV/log_dir
/db2/db2dev
/db2/DEV/db2dev
/db2/log_archive/
/db2/log_retrieve
/db2dev
/usr/sap/DEV/DVEBMGS00
/usr/sap/trans
/sapmnt/QAS
/db2/QAS/sapdata1
/db2/QAS/sapdata2
/db2/QAS/sapdata3
/db2/QAS/sapdata4
/db2/QAS/saptemp1
/db2/QAS/db2dump
/db2/QAS/log_dir
/db2/db2qas
/db2/QAS/db2qas
/db2qas
/usr/sap/QAS/DVEBMGS01
/sapdump
thanks/regards
sadiq

Dear Sadiq,
From DB point of view there is no problem to install two separate databases
of DB2 on one machine. The DB2 source files are installed into different directories and will not
impact each other.
After installing the software, the DB2 instance called "db2<SID>' is
created with the DB2 version you choose. The installation procedure
depends on the SAP release.
Whether of not your machine is able to handle both systems running on one server depends on
the hardware and settings.
Regards,
Paul

Feasibility of making a RAC installation on a single machine

Hii,
Is it possible to make a RAC installation on a single machine using oracle 11gR2?If so, how?Pls guide me through.

Feasible? ... certainly. Meaningful ... no!
There are a number of reasons one might wish to implement RAC ... horizontal scaling and high availability come to mind. With a single machine both are impossible.
Want to do this for purposes of personal training? ... Waste of time as you can not really learn how to build and maintain a real cluster. Far better to go to eBay, pick up a used 800 series or more recent NetApp, and create the real thing.

Two OEL on single machine

Hi,
I need to install two OEL on the same machine. Is it possible?
Install OEL 5.x and then Install another OEL 5.x. At the system startup I should get boot choices between two linux.
Any pointers?
Thanks,
Abhilash

This is possible but not all that pretty.
1) Install the first instance. Do _not_ accept the default partitioning;
2) Be sure to leave room for the second instance.
3) Put the boot loader into the MBR.
4) You only need one swap partition.
5) Now the tricky part -- read on.
6) Install the second instance but DO NOT accept the default partitioning;
7) Instead, choose the "use free space" for the second instance installation.
8) Reboot and choose.Why do you want two instances? If you just want to separate "work" from "home", then install one instance and create two additional partitions: one for each context you want to have. Then just mount the work-context partition over your empty "/home" directory, and vice versa.
But if your hardware can do it (check your BIOS) installing VirtualBox or VMware is much cleaner. With hardware virtualization support (HVM) you will not get much of a performance hit.

Single machine copy of installer

hi
I have created setup of my swing application using InstallAnyWhere. But i want my installer to be installed on single machine only. Once it is installed on any pc, it should not be installed on any other machine. This is for security purpose, so that client can't distribute software.
If anyone has any idea about it, please help
Thanks in advance

nvv wrote:
...If anyone has any idea about it, please helpGive the software free, and sell support.

Can you combine the two sides of an Xserve RAID into a single drive?

I am looking to combine my Xserve sides into a single drive so that it will be more efficient for storing beyond hi-def video. I have an Xserve RAID with 14x750GB drives which format in RAID5 down to 4.09TB per side. I want to create a singe 8.18TB drive from these.
Is there an easy way to do it?

Thanks for the info William, I did backup a few important files before this happened, but I would like to get to a few more.
It happened when our IT guy was showing me how to create a new RAID set. He created a set while explaining a few things, then selected the new one he made, and deleted it. Right then, both sets disappeared and were deleted, the empty one he made, and the one we needed. I was watching him, and he didn't select both, just the empty one he'd made. So, I was hoping that there would be a work around just so that I could maybe use a data rescue utility to possibly pair the 2 together long enough for me to back up some files.
If anyone has any recommendations, please let me know.
thank you.

Trying to understand CF side-by-side installations (CF9 and CF11)

I'm testing my upgrade from CF9 to CF11 on the same server. Looks like my old CF9 installation was an enterprise, standard, IIS installation. (if that makes sense to you) My CF11 is an enterprise, production + secure, stand-alone installation. It appears that I had to choose the stand-alone installation with internal web server so it can diferentiate between the two Cold Fusions adn do side-by-side installation. We want to use the internal web server anyhow so we can use the built-in Tomcat server instead of having to install a separate one. Now the question has come up, how do I get all of my web pages that are on IIS into my current ColdFusion. I discovered a document that discusses the Web Server Management. It looks like I can run it now and it will configure my connection between IIS and ColdFusion.
https://wikidocs.adobe.com/wiki/display/coldfusionen/Web+Server+Management
My question is, can this be done while CF9 is still up and running and then it would give me a CF11 ran instance of using the CF webpages so I can test them and get them to work. Someone was thinking that IIS wouldn't be able to figure out which CF administrator to use. Two CF applications cannot use IIS at the same time. If so, how do I get the two systems to run side-by-side using my CF pages, so I can test if anything broke and needs to be changed in the code, and/or test any of the new capabilities in CF11?
Thanks in advance!!

It can be done, but it is not necessarily for the faint of heart. I haven't done it in quite some time. Here are the basics:
Figure out which ports CF 9 is using.
Install CF11 using the built-in web server first (don't connect it to IIS). Make sure CF 11 is not trying to use the same ports as CF 9.
Run the CF9 Web Server Connection Tool. See if you have "all sites" configured. If you do, remove the connector and reinstall individually to the sites you want CF9 to operate. Make sure your sites operate properly before moving on.
If you want to have the same site code run under both CF9 and CF11, you'll need to copy the directory of the CF9 site to a new directory for CF11 (e.g.: D:\sites\MySite -> D:\sites\MySite2)
Run the CF11 Web Server Connection Tool. Connect your CF11 site (D:\sites\MySite2) to IIS.
Repeat 4&5 for each site you are parallel testing with CF11.
I'd do a Google search on "install multiple versions of ColdFusion", as there are several blog articles involving previous versions of ColdFusion. If you find one that shows CF9 paired with CF10, it should be pretty much the same for CF9 and CF11.
If it were me, though, I'd spin up a virtual machine, copy the site code in, and install CF11. I would then do extensive testing, fix code that breaks, then when once I was satisfied CF11 is working fine, copy the code updates back to my production server and do an upgrade install of CF11 to replace CF9.
-Carl V.

Can single machine have multiple JVM running ?

Hi ,
I have two questions.
1) I have running jboss4 and tomcat 5 running in single machine, does it mean that they are running in same same jvm?.
2) If no how i can configure the jboss and tomcat for running in same/different JVM but in same single physical machine?
Please help me
Thanks in advance
Shuja

tschodt wrote:
Greek wrote:
1) I have running jboss4 and tomcat 5 running in single machine, does it mean that they are running in same same jvm?.In the same JVM instance - no.
On the same Java installation - depends on how you run them.
2) If no how i can configure the jboss and tomcat for running in same/different JVM but in same single physical machine?For JBoss you set JAVA_HOME.
For tomcat - I dunno - should be in the documentation somewhere.Thanks for reply
for both jboss and tomact i have set jave_home to same the path, how i do ensure that they are running in same jvm instance.

Two versions of Developer, same machine

I need to use a single machine to access two different applications, one using Developer 2000 v4x and one using Developer v6. What is Oracle's support stance for a machine that has two different versions of Developer loaded on it? Can it work efficiently and/or effectively? How? Thanks for any help.
Paul

Originally posted by Deepak Rai, Oracle Support Services ([email protected]):
Paul,
You can install different versions of Developer on a same machine. Some of the Developer versions supports multiple ORACLE_HOME installations also.
eg: Forms/Reports 6i can be installed in a separate ORACLE_HOME.
The Release notes lists all the Developer versions which are supported on same ORACLE_HOME.
Following are the versions of Developer which can be installed on the same ORACLE_HOME as Developer 6.0,
1. Developer 1.6.1
2. Developer 2.1
Best Regards,
Deepak Rai
Hi Rai,
Sorry about my previous message. Anyways As I was saying I'm trying to Install Developer 2.1 and Developer 6.0 in the Same machine. By default both installations are install in the same Oracle Home Directory C:\ORANT and the same registry Key ORACLE. For Develop 2.1 I have to make some changes to the Registry under the ORACLE key. How can I make this two version coexist in the same machine? What version I have to install first to have a succesfull installation?
Is there any instrucion I can reference to in the Web?
your reply will be greatly appreciated..
Carlos
null

How can multiple users use the same Creative Cloud Individual on one single-machine?

We have one shared graphics workstation, which is infrequently in use by different people - therefore we bought a single-workstation license (which we were referred to "Creative Cloud Individual"). In the FAQs it says it installs locally, but whenever a user different from the installing adminstrator logs in, he is forced to use the trial.
Is there a way to make the local installation usable on that single machine for multiple users?
Thanks in advance for your reply

Serenatasystems do the other users not have administrator access? What happens if they sign in using the Adobe ID tied to your Creative Cloud subscription? Do your Adobe Creative applications then exit trial mode?

Multiple Reports Servers on single machine

Forgive me if this has previously been posted - I searched, but I'm probably using the wrong terms to search properly.
Our current environment calls for two OAS installs (10.1.2.2.0) that access two separate oracle databases (10.2.0.2 if it matters). Those same app servers also run Forms and Reports (also 10.1.2.2.0), which the apps access.
What we are now attempting to do with limited success is to consolidate those two application servers and reports into one machine but have the services essentially separate, so that not only do the applications access different databases (this is where we've succeeded) but also the reports are separate (from the limited knowledge i have, i think it will require a separate cgicmd.dat file...maybe?).
In case i'm not being perfectly clear, i need to have the exact same report (many, in fact) on two separate reports servers (on the same machine) contacting two separate databases (incidentally by duplicates of the same app, too, but I can take care of that part).
Any tips on how I could accomplish this? I followed the short steps outlined here:
http://www.oracle.com/webapps/online-help/reports/10.1.2/state/content/navId.3/navSetId._/vtTopicFile.rptoem_hs%7Ctasks%7Crptoem_conf_addnew_repserver~html/
But I'm a bit foggy regarding what to do next.
Any help will be greatly appreciated.
Thanks.

The report gets called via the rwservlet (hope that answers your question correctly)
The application is in OAS.
The separation i require is both in the database and the reports themselves.
For example let's say i have devapp and testapp - both the exact same app. But they both need to access reports under the same key, but the report needs to get its info from its respective dev and test databases. The key is hardcoded so can't change.
If i understand correctly (a big "if"), the cgicmd.dat file tells wich report to grab and which database to connect to based on the key. Is there a way to have separate key map files (cgicmd.dat) called by separate applications? So that devapp will get Report1 using devdatabase, where testapp wil get Report1 using testdatabase?
It may not be possible to do this kind of server consolidation, I just need to know one way or another for sure - and if it is possible, how to proceed.

Side by side installation Crystal Reports for Visual Studio 2010 - CRXIR2 ?

we are integrating Crystal Reports for Visual Studio 2010 into our C++ application.
We used to work with CRXIR2.
A customer of ours has upgraded to the VS2010 runtime version for 64-bit,
and seems to be having random crashes.
We haven't been able to pinpoint the problem...
They are running several of our applications simultaniously on terminal servers.
What we noticed is that they did not uninstall CRXIR2 from there system.
Is this side-by-side installation supported?
So XIR2 next to Crystal Reports for Visual Studio 2010 ?
And even: can you have a Crystal Reports for Visual Studio 2010 64bit next to a 32bit? Probably yes?
Next to that: is there any limit of concurrent users (applications) that use the .NET component?
I would think not...
Bart

Hi Bart,
Side by side installation shouldn't be a problem, unless you had Beta version of CRVS2010 installed on the same machine.
For better results try upgrading to use SP1 of CRVS2010. For CRVS2010 resources, you can go through this
Crystal Reports for Visual Studio 2010 - Deployment
I haven't seen any problem with 64bit next to a 32bit til date.
You can go through this for CR support on x64
http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/10d5fa88-2013-2c10-c9a5-f11963607d4e
To answer your last question, go through following:
Crystal Reports Maximum Report Processing Jobs Limit
http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/f053713e-3e3d-2c10-2a81-f79259e54023
Thanks,
Saurabh

Two node installation with 2 concurrent managers..

Need your help. I have 12.1.1 Two node installation on Linux 5.9 with 64 bit.
Linux2- Database server + Concurrent manager
Linux1- Apps Node
Port - 8002 (port pool -2)
on my app node - linux1, I have 2 directories <SID>_linux1 and <SID>_linux2. First one is for primary apps node and second one is for 2nd concurrent manager. It is a shared directory structure. I have 2 questions:
1) If I run the autoconfig on Linux1, I can run all the services and connect to apache. However, If I run the autconfig on linux2, I will not be able to connect to web server (for a short time request will be sent to Linux1 and then it gets forwarded to Linux2 - even though Linux2 is not app server).
2) How do I run the second concurrent manager on LInux2? After I run the 2 concurrent manager, how do I test both concurrent managers are working?
Your help is much appreciated.

Hi Hussein,
Thank you for the info. I was wondering whether the Linux2 concurrent manager was installed correctly or not. I went to xml file and found these entries and it made me think, it didn't install correctly because only concurrent manager should have been yes and the rest should be no. Isn't it? If it is wrong, how do I correct this?
<oa_system_config>
         <TIER_DB oa_var="s_isDB">NO</TIER_DB>
         <TIER_ADMIN oa_var="s_isAdmin">YES</TIER_ADMIN>
         <TIER_WEB oa_var="s_isWeb">YES</TIER_WEB>
         <TIER_FORMS oa_var="s_isForms">YES</TIER_FORMS>
         <TIER_NODE oa_var="s_isConc">YES</TIER_NODE>
         <TIER_FORMSDEV oa_var="s_isFormsDev">YES</TIER_FORMSDEV>
         <TIER_NODEDEV oa_var="s_isConcDev">YES</TIER_NODEDEV>
         <TIER_WEBDEV oa_var="s_isWebDev">YES</TIER_WEBDEV>
         <config_option type="techstack" oa_var="s_techstack">as1013</config_option>
         <config_option type="techstack" oa_var="s_tnsmode">generateTNS</config_option>
         <config_option type="adx" oa_var="s_apps_version">12.1.1</config_option>
         <config_option type="techstack" oa_var="s_apache_mode">NORMAL</config_option>
         <ias_version oa_var="s_ias_version">10.1.3.4.0</ias_version>
      </oa_system_config>

HLP:Serving forms in 2 distinct envirs from a single machine

We would like to set up the forms and report server on a SINGLE
machine in such a way that the OAS
can serve forms to 2 distinct groups of users: Developpers and
production users. Is this
possible ? If so, how do we do it ?
For example, say we have a form called 'A' that is used in
production. Now we have to modify and
test it in development. We only have 1 physical machine
available. Is there a way on only ONE
machine to serve Development form A to developpers and
production form A to production users ?
Of course we could have two versions of the forms and report and
use different names, but this
solution is not really easy to manage....
What about the libraries (PLL) and icons (and all other
attachable objects in FORMS)
Say I have 2 directories:
/disk1/dev/forms
containting FORMA.FMX
MYLIB.PLL (Used by FORMA) (Actually, my cartridge
and forms server is set up to use these directories)
/disk2/prod/forms
contaning FORMA.FMX (Production version)
MYLIB.PLL (Used by formA)
Do I have to set up 2 virtual directories ? 2 different forms
cartridges. 2 different forms server (on different ports)
For now, I only deploy in a single environment (DEV). The UNIX
environement from which I start the FORMS
server contains stuff like:
FORMS60_PATH=/disk1/dev/forms
+ setting specific to this environment (TK60_ICON, etc...)
How do I set it up to run forms in 2 distinct enviroments ?
What about reports variables (We are using the cartridge as well)
Thanks
null

Thanks wilfred,
yes I've read that manual. Probably not every single page ;-)
I agree that High-Availability is a very broad and complex topic, but my question is (although it was difficult to explain what i mean) only on a small part of it:
I understand that I can have mutiple instances on each level OC4J, HTTP, WEB-Cache, LBR But where or who excepts one single URL and leads the requests to the available AS
As mentioned in my post before, we may etst the Microsoft NLB-Cluster to divide the requests to the WEB-Cache Instances on the 2 AS and then the 2 Web-Cache proceed to the 2 HTTP and so on.
The Idea of that is that Windows offers a virtual IP-Adress from those 2 Windows-Server and somehow the requests will be transferred to a running WEB-Cache.
Does that work correctly with session-Binding ...
We'll see
thanks,
Mark

Two SID installation a single machine???

Similar Messages

Maybe you are looking for