Two sided printing for hp4620

Can I update the driver or software for my HP4620 to enable duplex printing?
This question was solved.
View Solution.

Hi,
No, this is something to do with physical hardware too, it's a duplexer. You printer does not have this as an option.
Hope this make sense.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Best Printer for Two-Sided Printing?

Hi all,
I do a lot of printing of very long documents (up to 300 pages each) - right now I have an Epson CX4800 Inkjet which works very well, but I fear I am running it into the ground. Also, I am going through tons of paper and ink. I'd like to get an inexpensive laser printer (under $300) that can do duplex (two-sided) printing so that I can use less paper when printing out early drafts of projects. I don't want to have to manually flip the pages over and put them back through the printer because I am a ditz and a klutz and always wind up getting the pages in the wrong order when I do this - thus wasting even more paper. I just want a printer that can do automatic two-sided printing for under $300. Am I delusional?
mac mini Mac OS X (10.4.7)

No matter what printer you are going for (please specify if you are looking for a colour or mono laser), the biggest expense you would encounter are consumables: toner, drums, transport belts, fuser unit. The reason you should do that first is that consumers are lured into buying a cheap printer and by the time of the first toner change they have to spend as much money as they did on a printer.
What you have to do first is look around for a printer that has lowest cost for consumables (i.e. lowest cost per page print). The easiest thing to do would be take a supplier of consumables, and write down all the prices for the toner for specific models of printers, then divide them by the number of pages you can print from that toner - in this case you will get a breakdown for each colour: say, a replacement toner costs £50 and yields 4500 prints (with standard 5% page coverage) = 1p per page for that colour. Then compare this costs against the costs of your other candidates and you got yourself the most cost-efficient printer.
Besides that though, you might hav e to spend money on things like drum (lasts for about 25000-40000 pages in SOHO printers) and transfer belt (again, 25000-40000) - but that all depends on a printer, as sometimes toner and drum are separated, so you have to get both, sometimes they are in one set, which cuts your costs.
In my case, I've got a Xerox Phaser 6120, and although it might not be suited for you, it's OK for me as duplex unit can be added on, and I don't do this many prints. In your case my biggest concern would be, as I have said, the prices for consumables.

How can I print black ink only when in automatic two-sided mode for Officejet 6500?

When I set the printer to automatically print on two sides, it only allows color or high quality grayscale as print color options. If I print on only one side, then I have a third option for black ink only. Does anyone know how to get black ink only while getting two sided printing automatically?
This question was solved.
View Solution.

Sorry, this is not an option. When printing the front page of a duplexed page the black is underprinted with color to make the print "set" and dry faster. As a result "black only" is not an option when printing automatically duplexed pages.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Option for Automatic two sided printing no longer available

Win 7 and HP c7280, Word 2010. Everything worked fine yeasterday but today when I tried to change from one sided to automatic two sided printing I got only two choices, one page or manual two sided. It is set for automatic in the printer properties but in the panel where it asks what you want to print I put in entire documant and then below that it asks for one sided or drop down menu used to say manula or automatic two sided, now it only says manual. What happened and how to I fix it. Printer Setup says the extra atachment is "installed"

Welcome back to the HP Community , I read your post about the print settings that seem to be missing from Word 2010. I have a few ideas in mind that may help you below. 1. Run the Print and Scan Doctor. This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. If there was a problem that the tool could not fix, you will notice it in the results. 2. Uninstalling the Printer Software, restart the PC and reinstall the printer. 3. Print from other programs, and if you find the issue only in Microsoft Word 2010, post this issue in the Microsoft Forums to see if an expert there can help! Microsoft Support Forums: Ask Community I hope this helps!Show thanks for my reply to help you today by hitting the "thumbs up" icon below!

HP LaserJet P1005 Two-sided printing not working on network

Good day!
I have a desktop, with Windowx XP, to which my LaserJet P1005 is connected via USB. My wife has a laptop, with the same Windows XP, from which she can print, but the two-sided option does not work right. She can check it and print, but the window to restart printing for the second side does not open and there is nothing we can do at this point.
I have trie duninstalling the printer from both computers and reinstalling the newest drivers, it still won't work.
Thanks for your help!

I have an HP PhotoSmart 2575 All-in-One with the latest HP driver that displays the two-sided printing option greyed-out in the Layout window. According to HP, your printer must be capable of accepting an optional two-sided printer tray to work on a Mac. To me that is ludicrous since in Windows the driver supports manual two-sided printing.
To get around this, I select the Paper Handling window and from the Pages to Print drop-down list select Odd only instead of the default All Pages. After clicking the print button the odd pages print starting with the last page and ending with the first. I then remove all paper and reinsert the printed pages with the top of the page facing the printer. First, though, I reorder the pages with the first page on the bottom and the last page on top. If the total number of pages is an odd number, I remove the last page from the inserted stack, as that is the very last printed page. I then select Even only from the Pages to Print drop-down list and click print again.
Problem solved.

Problem with HP 1220c USB printer - two-sided print greyed-out

My client has a Powerbook G4 550MHz with Tiger 10.4 installed and I installed the latest HP 1220c driver.
When my client attempted to configure the printer via the printer setup page under 'layout' the two-sided print is greyed-out. Why?
My client has admin rights.

The layout of the print window is not the same as OS 9.x and prior. There will not be a choice for double sided printing as there was pre OS X unless the printer comes with an automatic duplexer.
You will have to figure out how to print odds and evens in separate jobs and do it manually.
Matt

How to STOP default two sided printing

I have a macbook air (2013) and a Canon 8350 all in one laser printer...it ALWAYS defaults to two sided printing and I NEVER want to print two sided as I print for business and have no use for it...I often forget to uncheck it and thus end up wasting paper and ink.
I have looked through all the settings and cannot figure out how to get it to NOT default to two sided printing. I know I can save the settings, however it doesn't default to that new profile, so I would have to select the profile every time to change it, which makes no sense as a solution (I still have to remember to do it EVERY TIME).
Anyone know of a way to stop this behavior?

You can change the default via CUPS, which is the core printing system of OS X.
Open Safari and enter the following URL
http://localhost:631
By default on 10.8, access to the CUPS page is blocked. To enable it, open Terminal and type "sudo cupsctl WebInterface=yes" (without the quotation marks). Enter the admin password when prompted and then refresh the Safari view.
With the CUPS web page open, select the Printers tab and then select the printer you want to modify. Then from the Administration drop menu, change to "Set Default Options".
This will show a new page with four menu headings (links); Options Installed, General, Banners and Policies. Select General.
Scroll down the list until you see the Print Style menu. Change it from 2 Sided to 1 Sided and then scroll down the page until you see the Set Default Options button.
Click on this button to save the change. You will then be prompted to authenitcate to CUPS.
Enter the account name and password that has been set as the admin for this Mac. And then press the Log In button. You will then see another page stating that the information change is completed.
You can now check that the change has been successful by selecting to print this page from Safari. With the correct printer selected, change to the relevant menu to ensure your modification has worked.

Two-sided printing with Epson Workforce 630

I bought a new iMac a few months ago and got the Epson WorkForce 630 printer at the same time. However, I can't figure out how to do duplex (two-sided) printing. I've searched around, and it looks like this feature may not be supported for the Mac. Now, why would Apple sell a printer through their website that doesn't support Mac? This seems like a basic feature that all printers should have.
Does anyone know a work-around? The "two-sided" selection is grayed out for me.
Thanks!

Thanks! Unfortunately, on the Epson site, it says, "
Q:
Is manual duplex (double-sided) printing supported in Mac OS X with my product?
A:
No. This feature is supported in Windows only."
I really don't know why Apple would sell a printer through their stores that doesn't support all features in their OS. I might end up going back to my older printer.

How do I select two-sided printing on LaserJet Pro 200 Color?

How can I print documents with two-sided printing with LaserJet Pro 200 color printer. I have Mac )S X 10.10 Yosemite.

Hi @jleo ,
I see that you would like to know how to select the two-sided printing. I would be happy to help you, but I will need some more information.
What is the full name and product number of your printer? How Do I Find My Model Number or Product Number?
Are you using the Full Feature HP Software and Drivers or the Apple Update drivers?
How is the printer connected? (USB/Ethernet/Wireless)
Depending which printer you have and what drivers you are using, usually from the application you are printing from, go to File, Print, click on the Layout in the dropdown and you might have one also listed for Manual Duplex option, you should be able to select the two-sided setting there.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How do I select two-sided printing now that I have Adobe Reader? I didn't know it would change my pr

How do I select two-sided printing now that I have Adobe Reader? I didn't know it would change my print function at all and am curious why it does. My HP printer always did this and on the old screen there was a check off box for two-sided printing. Thank you!

Hello Mickeyps
What's the Adobe Reader version at your end? I am using Reader 11.0.06 and I do see this option. See below.
Regards,
Deepak

HP printer 5514 and two sided printing.

I have the HP photosmart 5514 printer and I think it will do two sided printing, but how do you get it to do that??
This question was solved.
View Solution.

Hi,
Based on the following information, no, it can not print duplex (auto)
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02907978&tmp_task=prodinfoCategory&cc=us&dlc=en...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Two sided printing HP Officejet 4630

How to use the two sided printing with the HP Officejst 4630. I see how to use two sided copy.

Hi,
It has a duplexer that means you can print both sides automatically. Please try (from page #10 of its manual):
To print on both sides of the page
1. On the File menu in your software, click Print.
2. Make sure your printer is selected.
3. Click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties, Options, Printer Setup, Printer Properties, Printer, or Preferences.
4. Select the appropriate options.
● On the Paper/Quality tab, select the appropriate paper type from the Media drop-down list in the Tray Selection area, and then select the appropriate print quality in the Quality Settings area.
● Click the Advanced button, in the Paper/Output area, select the appropriate paper size from the Paper Size drop-down list.
5. On the Layout tab, select Flip on Long Edge or Flip on Short Edge from the Print on Both Sides drop-down list.
6. Click OK to print.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP ColorLaserjet 2600n-Two-sided printing with Snow Leopard

Hi,
I have a question relating to double-sided printing. I have a HP Color LaserJet 2600n. Two-sided printing worked fine for me with Leopard. Since I updated to Snow Leopard (now I have version 10.6.4) the two-sided printing options in the printing dialogue are disabled (greyed out). I use the printerdriver 1.3.0.261 How to enable this option again? Software update does not have any new software for my printer.
Thanks!

I have this printer and the same problem. This printer does not have a hardware duplex unit, the duplex is entirely manual.
In the old driver settings, you could check off the "Two sided" checkbox (beside the Collate checkbox), and the unit will basically print off the odd pages, then after that it will pause until you take the printed pages and put it back in the tray, then press the Go button to initiate the print for the other side.
There is no settings (besides Tray 3) in Options and Supplies.

Two sided printing with wordperfect HP Photosmart 6515

Any ideas how to set up two sided printing with wordperfect documents using HP Photosmart 6515

Hello,
You should be able to print on two sides using this method for your product:
NOTE:You can print your document on both sides of the paper, instead of just one side. Click on the Advanced button on the Paper/Quality or Layout tab. From the Pages to Print drop-down menu select Print Odd Pages Only . Click OK to print. After the odd numbered pages of the document have been printed, remove the document from the output tray. Reload the paper in the input tray with the blank side facing up. Return to the Pages to Print drop-down menu and then select Print Even Pages Only . Click OK to print.
Reference link:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02250284&tmp_task=useCategory&cc=us&dlc=en&lang...
Hope this helps.
I work for HP.

Two sided printing on HP with Yosemite no longer available?

Since updating my iMac to the latest Yosemite, (10.10.2) my HP all in one C6280 printer does not even offer the option of two sided printing. Is there a way to get this feature back? The printer used to do two sided printing, and the option used to come up, but no longer seems to be there. I read several posts which suggested renaming a preset, but in the preset dialog box, it indicates that this is no longer an option. Any help would be appreciated. Thanks

If it's greyed out, it could mean that your device does not support duplex printing under OS X. One thing you could try if you haven't already is remove the printer entirely then add it back in again. The drivers that Apple supplies are the latest drivers for this device, there are no full-featured drivers available for this OS version.
Also, verify that you are using the proper steps for manual duplex printing:
http://support.hp.com/us-en/product/HP-Officejet-6500A-e-All-in-One-Printer-seri es---E7/4083974/model/4083869/document/c…
If that doesn't work, you could try this two-sided printing application from HP:
http://ftp.hp.com/pub/softlib/software12/COL35975/mp-88750-2/HP_Two-sided_Printi ng.dmg
If the above doesn't work, I think an email to HP support is in order. I suspect that they dropped support for duplex printing for your device with the later OS versions. When was the last time you had duplex support? Was it automatic or manual (i.e. you had to flip pages and print again)?

Two sided printing for hp4620

Similar Messages

Maybe you are looking for