Two-sided printing problem with a Photosmart 6510

I have a new Photosmart 6510 and it is supposed to come with automatic two-sided printing.
I have tried printing two-sided and followed the advice of many previous thread but it has not worked.
I am using a Mac OS X version 10.5.8 and Microsoft Word 2008.
When I go to the drop-down menu in the Print window and go to 'two-sided printing' the option to print both sides is greyed out, and it says that the paper type and size settings do not support two-sided printing. What size paper should I select and where can I do this?
Any help would be great.
Thank-you
This question was solved.
View Solution.

Hi,
Please try the following settings:
1.From the application used to print, click the File menu, then select Print. The Print window appears.
NOTE: The Print window might be minimized. Click the blue triangle next to the printer name to see all available settings.
2. To select the binding type click the lowest selection box listed as Copies & Pages.
3. Select Layout from the drop-down menu.
4. Set the Two-Sided option as Long-Edge binding.
If I'm not wrong, the duplexer support only A4 and Letter sizes
You may save the settings for future use by clicking Presets > Save Current Settings as Preset...
Please let me know if you were able to successfully perform two-sided printing.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

Is two-sided printing possible with Keynote?

The power point slides for one of my classes opens in keynote so I have to print from there but my question is, is it possible to print on both sides when using keynote? When I go to print, and then the printing options I can see a two-sided printing option but for some reason I'm unable to click on it. I don't think its because of the printer I'm using because I've printed on both sides using Microsoft word with my printer before. I just can't seem to do it with keynote.
Should I just copy & paste to Pages to use two-sided printing?
Message was edited by: AshesAshes

I just checked any I can select two sided printing with my printer in Keynote, so I don't know why you wouldn't be able to if you have a printer that is capable of it.
But instead of copy and paste, I would export it as a .pdf (Share>Export>pdf) and then you can try to print two sided in Preview and if that doesn't work, then add the .pdf files to Pages and print.

Problem with HP Photosmart 6510

When trying to print on my hp photosmart 6510, the job goes to the print queue, but never prints.

Are you trying to print from ePrint or directly from your computer?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Two sided printing problem

When I use the two-sided print mode, the margins are slightly shifted and the document is smaller than when I print single-sided mode (whether it's text or graphics). Is there a way to make sure the document prints the same way it does in single-sided mode?

Sorry to hear about your troubles. Could you post a little more information about your setup? Here is a quick list that should allow us to troubleshoot the issue.
What printer your using?
What operating system your using?
What application(s) you are printing from?
Thanks!
-SeanS
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

10.6.8 Printing problem with HP Photosmart premium C310 printer

I hvae a Photosmart Premium C310 printer which is connected wirelessly to my network. I also have a Mac Pro which is connected to the same network by ethernet cable. Up until I updated to OS10.6.8 everything worked fine. After that I found that when I restated the printer I could see it for a short time under the printer list but then it seems to "time out" and I can no longer print to it within a couple of minutes from my Mac Pro. When I restart the printer I can also see its embedded web page again for a few minutes but then it becomes not visble.
I also own a Macbook pro and two iphones and an ipod touch and all these wireless devices have no problem with seeing the printer and printing to it at any time. The Macbook Pro is also updated to 10.6.8 and works fine with this printer.
It would seem that the issue is not with wireless devices but with a wired device printing to this wireless printer even though it is on the same network and on the same subnet mask. All that has changed between working fine last week and not being recognised this week is an update to OS10.6.8
I have restarted the Mac Pro, reinstalled the latest HP software and reset the printers wireless setup but this makes no difference.
Is this a similar issue to what others have been reporting about a bug with printing under 10.6.8 or possibly something else. Any help here would be appreciated as I have no way of printing from my Mac Pro right now.

Pengtao, I have plugged my Macbook Pro into the network (with Airport off) and I can no longer reach the Photosmart printer. Remove the cable and go wireless and the Macbook Pro can reach the printer again. I have installed the photosmart printer software under Windows 7 using Parallels on my Mac Pro and have no problems finding the Photosmart printer from it.
To make matters worse I have bought a new Laserjet M1536 today and install it on my network. Again I get the same issues. I can print to it from any wireless device on the network but cannot reach it on any wired device on the network.Switch the printer off and on and I can see it and print to it for about a minute then it becomes "offline" to my Mac Pro
Given that it works fine under Windows 7 from a Mac Pro I have to conclude that the issue must be OSX 10.6.8 and nothing else as everything worked fine before the upgrade. I have turned all device off and on , checked all cable connections and also uninstalled and reinstalled all printer drivers on the Mac Pro and cannot get it working. Any advice you may have that may solve the problem beyond it being an OSX issue will be greatly welcomed.

How to do two sided printing automatically with HP 7520 printer

All that I am trying to do is to make my printer do two sided or double sided printing. No matter what I check IT DOES NOT WORK. I checked "2-sided, 1 to 2, NOTHING. What amazes me is that this worked until recently and now it just will not do double sided printing. I am probably doing something wrong, but WHAT?
This question was solved.
View Solution.

filgrastin
Generally speaking, duplex printing is accessed / adjusted from Printing Preferences.
If you are printing from within an application, for example, within Word or within your Browser, you might reach Printing Preferences from Print Preview.
Reference:
Manage Print Output with Print Preview
Excerpted:
Print Preview – Accessing the Printing Preferences
Browser Page > File > Print Preview > Properties
Properties Accesses Printing Preferences:
Paper Source (Tray Selection), Paper Size, Media, Orientation, Print on Both Sides, Page Order
Reference: Printing Preferences
================================================
Click the Kudos Thumbs-Up to say Thank You!
And...Click Accept as Solution when my Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

Adobe reader XI: doule sided print problem with network printer (windows 8 pro)

Hi, I'm facing a problem with my old printer, the xerox phaser 3160n. It was connected to my notebook through network connection, and everything works well with Adobe X /Win 7 OS (including the double side print, of course) last month, I have upgraded my NB to windows 8 with clean install
clean install my printer driver for windows 8 too, and Adobe reader XI was also downloaded through official website.
However, since I was about to use double sided print in Adobe reader XI (11.00.02) it couldn't obey the order, but just print one side as usual
I have checked the "option" of my printer, and it was correctly set to "double-sided print". I have tried word 2013 to open the same pdf, and choose the same "double-sided print" and it works perfectly.
Is this problem a bug? and would it be corrected in the next update version??
(I remeber I've saw a similar issue too, with network printer, but I couldn't find it)
Thanks!!!

Hi,
Meanwhile, after insatlling the latest driver for printer from the manufacture website, restart the spooler service as a test.
Start > Run > cmd and type "net stop spooler" after that "net start spooler" or start > run > service.msc and restart it over the GUI.
Run Printer Troubleshootor under Action Center\Troubleshooting\Programs\Printer, and check if it helps.
And yes, the manufacture should have more sence about the printer, it's recommended to contact them.
Yolanda Zhu
TechNet Community Support

How is 2 sided printing done with a Photosmart B210a?

Photosmart Plus B210a
Win 7-32 bit
no errors
no changes
General question for how to start a 2 sided print job. I don't seem to be able to locate the feature in the printer software.
Thanks

Hi,
I can NOT even find word duplex in its manual (c02456532.pdf).
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Print problems with my Photosmart D5360 in a network with Windows 7

My printer is installed on my desktop PC that runs on vista.
I have two notebooks too.
One is running on vista, the other runs on windows 7.
They are all connected in a wireless home network that seems to be perfectly ok.
With the notebook on vista I can perfectly print via the wireless network, but with the notebook that runs on windows 7 it is not possible to print. The Notebook gives no failure message and the printer just gives a blank paper with a "paper failure" message on the printer.
It seems to be a network problem or a mismatch between vista and windows 7.
Is there somebody who can help me with this issue?
Thanks,
Peter.

Hi IUHoosier,
(Is this your name?)
First of thank you very much for your reply.
May be I was not clear enough in miy explenation.
My photosmart D5360 is connected to my desktop PC with USB.
So it is not a networkprinter.
When I connect the notebook that runs on windows 7 directly to the printer with a USB connection than there is no problem, it prints perfectly. In this situation I use the printdriver for Windows 7 that I installed a few days ago on the notebook itselve.
So I have the latest drivers on all my computers.
However, when I want to print via the wireless home network and so via the desktop PC to which my printer is connected, I have to use the printdriver that is installed on my desktop PC (or not??) that runs with Vista. In this case it won't print.
My desktop PC doesn't allow to install a driver for Windows 7 because it runs on vista. And on my notebook thatruns on windows 7 I can't reach the printdriver instaaled on the desktop PC that I use to print wireless.
Maybe I am a bit clumsy with these things because my knowledge of networks is very basic I'm afraid.
The second link you gave me is in my opinion not useful for my situation? Or am I wrong?
Many thanks so far.
Best regard,
Peter.

IMac printing problem with HP Photosmart 7150

I've just bought a 27 inch iMac and I'm having problems printing out of iPhoto 9. I select for eg, 4 X photos per page and it prints about 10% of the page before spitting it out. I've downloaded the latest driver for my HP Photosmart 7150 printer (Gutenprint v5.2.5) but still no good.
The print monitor window always says it is printing Page 1 7%. Weird.
Any ideas?? Thanks in advance.
Dan

I've got the same problem on my MacBook Pro with Snow Leopard and Gutenprint 5.2.5 when printing on the 7150 - it prints about 10% (and skewed at that) and spits out the page. This occurs when printing from any app.
I am only able to print in draft mode which is not suitable for anything I need to do.
I realize this printer is no longer officially supported, but any help would be appreciated!
Thanks,
Mike.

Printing problem with HP Photosmart 5510

This is not really a Mavericks problem but I was hoping that someone out ther who owns a HP Photosmart 5510 all in one printer may know the answer. All was working fine up untill I (foolishly) changed the printing mode to economy black & white and now I can not get it back to printing in colour. Anyone know how to do this please?
Sorry that this is not a specivic Apple problem but I am desperate!
Cheers.

Hello wil46,
Welcome to the HP Support Forums! I understand you have recently changed the black ink cartridge on your HP Photosmart C8180. I would first like to make sure that the cartridges are properly vented, take a look at the picture below:
Please take out the cartridge and inspect it, clean the contacts with a lint free cloth (coffee filter works best) and some distilled water, also clean inside the printer where the cartridge sits. Depending on how long the printer was sitting for or an empty cartridge this can sometimes cause the nozzles to dry out which could cause the black ink not to print.
Now let's go ahead and clean the printhead, from the front panel of your C8180 follow the steps listed below:
Setup Menu > Tools > Clean Printhead
You may need to do this a few times, if you see the black ink quality getting better please continue with the cleanings.
Let me know if this was helpful, I will watch for your reply.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Printing problems with HP Photosmart Premium C310a series

I recently installed an HP Photosmart Premium C310a series printer. Now the printer takes about 45 minutes to print a document. HP support says this is an Apple problem.
Can anyone help?

What file was the problem?
It seems that in the Windows/System32/Spool/Drivers/x64/3, the newly re-installed updated HP drivers (with the 2011-2012 dates) are the only ones with a .BUD extension. Maybe my Win7 computer doesn't recognize them as drivers? The other driver files in the '3' Folder have .dll, .gpd, and .vdf extensions. Is there another spot they should be copied so the computer can find the drivers? I see that up the chain in the Spool Folder, next to Drivers there is an empty folder named Printers.
And what files (Filenames) are needed to run the 309g-m? I assume some older drivers were kept on file when I ran the updated driver Install program. The newer HP 2011-2012 files in the '3' Folder are hpoc30j3.BUD, mxdwdui.BUD, hpc309at.BUD, and everything else is older. I need to know what to copy-paste to a better folder location.
Whatever and wherever the Drivers are, my computer can not find them!

Printing problem with hp photosmart 8180

The printer dont print in plack, although the cartridge is new.

Hello wil46,
Welcome to the HP Support Forums! I understand you have recently changed the black ink cartridge on your HP Photosmart C8180. I would first like to make sure that the cartridges are properly vented, take a look at the picture below:
Please take out the cartridge and inspect it, clean the contacts with a lint free cloth (coffee filter works best) and some distilled water, also clean inside the printer where the cartridge sits. Depending on how long the printer was sitting for or an empty cartridge this can sometimes cause the nozzles to dry out which could cause the black ink not to print.
Now let's go ahead and clean the printhead, from the front panel of your C8180 follow the steps listed below:
Setup Menu > Tools > Clean Printhead
You may need to do this a few times, if you see the black ink quality getting better please continue with the cleanings.
Let me know if this was helpful, I will watch for your reply.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Printing problem with HP Photosmart Premium C309g-m

I'm running windows XP sp3 on all of my machines with this printer{HP Photosmart Premium C309g-m} wireless network.Recently everything starts to print one inch lower on the paper and cuts off the bottom of each document I try to print.I print mostly from microsoft word 2007,and I have checked all the settings in word.It is almost like the printer skips an invisible header then starts to print the document.Any ideas would be appreciated.

I don't think there is anything wrong with the DSL modem HW. There might be an issue with how print data is being routed though.
Please try the second experiment where you blank-out the default gateway and DNS entries from the printer's internal web configuration page. Open the printer's internal web page by browsing to its IP address. Select Networking and then Wireless (802.11). Under the IPv4 Configuration tab, select Manual IP:
For Manual IP Address, use the existing printer IP address.
For Manual Subnet Mask, use 255.255.255.0
For Manual Default Gateway, leave blank. This is important.
Select Manual DNS Server:
Leave both the Manual Preferred DNS Server and Manual Alternate DNS Server fields empty. This is important.
Press Apply.
Turn off the DSL modem, the printer and all computers connected to your network. Wait 60 seconds then turn on the DSL modem and then turn on the printer. Then turn on the computers. See if this corrects the printing speed.
Regards / Jim B / Wireless Enthusiasts
( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
+ Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

Black ink not printing on my hp photosmart 6510 printer

I have a HPphotosmart 6510 printer that all of a sudden doesn't print in black ink anmore. I have done everything that I read to do. Even replaced black ink a couple times. I don't want to replace my printer its not that old and I reall like it.

Hi @Barbiegirl17 and welcome to the HP Forums!
I'm sorry to hear you've had issues printing black with your Photosmart 6510 printer, but I will absolutely do my best to lend a helping hand
I will suggest that you try the steps within this Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages document first. If that doesn't resolve the issue can you please let me know whether it's in or out of warranty and what country you reside in? Thanks!
Hope to hear back from you soon!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Two-sided printing problem with a Photosmart 6510

Similar Messages

Maybe you are looking for