Two sides printing HP Photo Smart C4280 OS X Lion

Hi folks!
I am just trying to find the HP driver to have my HP Photo Smart C4280 printer to allow the feature Duplex Printing. After doing some research, I just could find the link for Snow Leopard.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-88750-2 &cc=us&dlc=en&lc=en&os=219&product=5038006&sw_lang=
Did HP forget to release a solution for OS X Lion?
Thanks.

Hi,
You may perform a manual duplex print job using the pages to print setting.
Follow the steps below to find out how to perform such a job on Mac OS X v10.5:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01663233&cc=us&dlc=en&lc=en &product=3192753&tmp_track_link=ot_search
Shlomi

Similar Messages

Why does my IPad no longer print on my air printer HP photo smart 5520

I Can no longer print from my air printer HP Photo smart 5520. It was working great until my last upgrade. Need help

Hello Donna,
Welcome to Apple Support Communities.
I would suggest starting with the following article to troubleshoot your AirPrint issues.
USB printer troubleshooting for AirPort Express, AirPort Extreme, and AirPort Time Capsule
http://support.apple.com/kb/TS1253
iOS: Using AirPrint
http://support.apple.com/kb/HT6220
Regards,
Jeff D.

How to setup hp photosmart 5520 two side printing on Windows 8.1

How to setup hp photosmart 5520 two side printing on Windows 8.1

stanko wrote:
How to setup hp photosmart 5520 two side printing on Windows 8.1
Hi,
If you wish to keep print both sides as default, pleae try:
(a) Double click (or touch) "HP Photosmart 5520" icon (should be one on desktop,
(b) Click Set Preferences
(c) In "Lay out" tab, there are 3 options in print Both sides, select "Flip on Long Edge" (normally for Portrait printing)
(d) Click "Apply"
You can overwrite this default when printing from applications using Printer properties.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

C8180 error says two side print module not installed but i have used it before

my c8180 printer error says two side print module not installed but i have used it before.i reinstalled printer with cd but did not help. Jean

What operating system? The duplexer typically must be enabled (just once...) in the driver to make it available. Enable the duplexer as shown in the Vista/Win 7 Duplex Printing Troubleshooting Guide here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Two side printing samsung

Hi, I have problem with my Samsung printer (M2070). I can't print any document two sided. Before printing i made all setting properly (checked duplexer and two side printing box) Do have any solution this trouble. Thanks!

According to the specifications for the M2070 on Samsung's web site, this model does not have an automatic duplexer. So that means you will have to manually remove the first printed side and load it back into the paper tray to print on the reverse side.

Two side print

I have problem with my HP 840c printer. I can't print any document two sided. Before printing i made all setting properely (checked duplexer and two side printing box) Do have any solution this trouble. Thanks!

Hi mhatilla,
Follow the steps in this document to download the HP Deskjet Full Feature software.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=dj888en&cc =us&dlc=en&lc=en&product=59868&tmp_track_link=ot_search.
Let me know if this helped.
Advance 23

Convert two-side printing to one-side printing

I have a 6i report printing two-side pages. New changes need deleting back side so I delete the frame and everything on it. But the report still prints two sides, one being the desired and the other one unwanted blank (I know it because HP LaserJet 2100 prints two pages, as if it prints a two-side page report). Our production uses Xerox printers to print two-side pages so I don't want it print the blank, avoid its "overworking".
How can I delete the unwated blank side/page? What propert should I change?
Thanks in advance!
DC

Thanks Nagornyi!
It works, by setting the Hirozontal Panels per Page to 1.
DC

Two side printing out of Acrobat?

does anyone happen to know how to get a two-sided print out of Acrobat X? i have a 295 page numbers help document i want to print out and i can't find this setting no matter how much i look. the Adobe forum seems to be somewhat "windows-centric" but i am going to ask there as well.
i also tried a "two sided printing" search in the Acrobat help and no results came up.
TIA for any help on this.

hi gents.
thank you.
i do in fact have a duplex unit the HP 8600 All in One. the driver section for this printer (accessed through the Print + Scan options in Preferences) shows up as "HP OfficeJet Pro 8600" and it has both the Duplexer option checked as well as the "Additional Paper Input Tray" checked. Driver version is 3.3.3. also, note that i DO print on two sides in some of my other software (including docs printing with/from iOS7 on my iPhone).
i guess i need to check to see if i have the correct driver (?) but can you help me with two things before we get there?
1. when i hit File > Print in Acrobat i get what looks like a "Mac" printer interface. it doesn't actually look like either of your screenshots (thanks) - even though i /think/ i have seen these before either on the laptop or on the desktop.
if i click on "Printer" in my dialog i then get a prompt (in this case with an adobe logo) that i have never understood: "The Print Setup dialog box is provided by the operating system. To ensure that you can use the full print capabilities of Acrobat, please set all print options from the Applications dialog box. Do you want to continue? Yes/No".
does anyone know what this means or what i am misunderstanding in all of this? seems totally bizarre to get the mac print dialog and then get into the Printer button and then get this option especially if i am running a print pulldown option from Acrobat...
2. i am having to /manually/ put paper tray with the proper paper size into my two tray Espon WF 7520. i want to say that i /don't/ have this problem with the HP 8600 but now that i think about it i am not sure i have ever tried the second paper tray on the 8600. HOWEVER, i /do/ see the Duplexer checkbox option in the Driver settings of the 8600 while i /don't/ see this setting in the Epson WF 7520.
does anyone know if this is likely (also?!) a DRIVER SIDE ISSUE with respect to not getting any of my software to print to the second tray on the Epson? i mean, if i sherlock holmes this i /could/ say that if i cannot print to the second tray it is likely a old or wrong driver issue or even a implementation that they did not build into the good driver - since i cannot get to the second tray from anything on anything? or would this be incorrect...?
THANKS

Does the HP Photosmart Premium Model C310 Series have the capability to do two side printing?

Is my printer capable of doing two sided printing without manual intervention?

Hi fildawg,
First, check to see that the two-sided printing accessory is showing as installed:
1. Click the Apple icon on the top bar, to the far left
2. Click System Preferences
3. Click Print & Fax (10.6.8 and Earlier) or Print & Scan (10.7.x)
4. Click to select your printer (HP Photosmart C310) from the list on the left
5. Click the Options & Supplies button on the right
6. Click the Driver tab
7. Look for a line item that says "HP Two-sided Printing Accessory (Duplexer)", and make sure it has a check mark to the left of it.
Next, here are the steps to print two-sided:
The following is an example of the print workflow I use - it is just the order of menus/buttons/settings that you go through when setting up a print job.
1. Open a document to print
2. Click File --> Page Setup (If Page Setup is available, Safari doesn't usually have this option).
3. Under Format For: select the specific printer (Sometimes this will default to "Last Used Printer").
**By specifying the printer, you enable the driver-specific options for that product.
4. Select the Paper Size, then Click Ok
5. Click File --> Print
**Depending on the application, you may see a condensed driver window. Look for a down arrow or show details button to expand to the full size driver window.
6. Depending on which version of Mac OS X you are using, the two-sided option will either be:
- A check box towards the top of the driver window (or alternately, a selection within the Layout menu where you select the binding style).
- A menu item located in the drop down menu that is just below Orientation.
7. Click the Paper Type/Quality menu item, and ensure that these settings are correct for the media being printed on.
8. Click Print.
Please let me know if you need further assistance with this, or more detail.
Thanks!
I am an HP Employee
Click the KUDOS Star to say "Thanks"
Please mark the post that solves your problem as "Accepted Solution"

HP Photo Smart C4280 All-in-One Printer Does it have a memory of what I printed?

I printed a document on my printer on 08/31/10. Is it possible the document I printed then is still available on the printer somewhere? Does it get stored? Thanks for any help on this.

The printer does not have a document memory, you will have to go back to your computer (or photo card depending on where you printed from) and reprint the file.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Two side printing

How. do I print.from two single copy original. To one double-sided original I have the duplexdevice . installe

How. do I print.from two single copy original. To one double-sided original I have the duplexdevice . installe

Imageclass D530 settings for two side printing

My new D530 is set for front and back printing as OFF yet it still prints front and back even though no instructions to do so.
Could this be a driver problem? They have told me my driver sent with the printer is not correct for Windows 8. I tried downloading one from the sight. It did not load. I can print but stuck in double sided mode even though says OFF. Any suggestions?
Solved!
Go to Solution.

Hi jessasdad!
In the Mac OS X operating system, you will need to turn off 2-sided printing in each application. Please follow the steps below:
Click [File], and then [Print] in the application you would like to print from.
Click the drop-down arrow next to [Copies & Pages]or the name of the program. This depends on the program that you are printing from.
Select [Layout].
Set the 2-sided option as [OFF].
Click the "Presets" drop-down arrow and click "Save current setting as preset."
Name it "1-sided" or "Single-Sided" and verify that the imageCLASS D530 is the only printer selected.
Click "OK".
Print the document.
I hope this information is helpful to you. Should you need further assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Two sided print with Mac Mavericks 10.9.3

I had everything reinstalled on my Mac. Since then, I can't make the two sides printing work.
I have a HP Photosmart C7280. Duplexer is ticked.
I choose print two sides on the window options to print. But then the printers doesn't do it.
If I go to show presents from the printing options window, then layout, I see two sided is off.
But there I don't have the option to change it.
Why something so simple is made so time consuming? Does HP care about the environment?
Thanks.

Hello Planeta-Aleph,
Welcome to the HP Forums!
I understand you're unable to print double sided using the Photosmart C7280. I will do my best to assist you! Unfortunately, for this printer and the operating system you currently have, there isn't a full feature software available.
You can only install a basic print driver using an Apple Update. This information is stated from the HP document on OS X v10.9 Mavericks: Installing and Using the Printer on a Mac.
Added features that were included in the full feature software are not included in the basic print driver. This is why the two sided is set to off and you're unable to turn this feature on.
Please let me know if you have any further questions. Have a great night!
I worked on behalf of HP.

HT4356 I have the up photos smart 5514 printer and can't get it hooked up to print web pages. It says no air printers found and both a connected to the same wifi

I have the up photos smart 5514 printer and can't get it hooked up to print web pages. It says no air printers found and both a connected to the same wifi

Shannmo-
The HP PhotoSmart 5514 is on Apple's list of AirPrint printers, so it should work. <iOS: AirPrint 101>
One problem might be that your WiFi router does not correctly handle Bonjour data required by AirPrint. Contact the router's manufacturer to see if there is a change to its setup or a firmware update that will solve the problem.
I had a printing problem several months ago, where the WiFi had jumped to a neighbor's WiFi that happened to have the same name. There are a LOT of WiFi routers out there named "Linksys"!
Fred

What are the proper print settings to print two sides, landscape and bind on the short side?

what are the proper print settings to print two sides, landscape and bind on the short side?

This is a question best asked in the appropriate product forum.

Two sides printing HP Photo Smart C4280 OS X Lion

Similar Messages

Maybe you are looking for