Two sids for One instance

Hi All,
I have to create two sids for one database. I am using Oracle 9i on Windows machine as well as linux machine. Is there any possible to assign two sid's for one database.
Give me the suggestions...
Cheers,
Moorthy.GS

I think you need to define your term 'database' here
In Oracle world, database is usually referred to as instance.
a SID is one database instance, that's why, people will tell you that you can't have two SID for one database (instance)
However, if your 'database' means the schema and data, then yes, you can run two instances (with two SID of course) to host the same schema and data.

Similar Messages

Multiple Logical Systems in Partner Profile for one instance

Can we create multiple Logical Systems in Partner Profile (WE20) for one instance or one System? If it is possible, can we create Logical System with respect to Plant/Country?

I am not quite sure if I understood your problem completley. But let's see...
Usually you use on on MSCS Cluster Group per SAP instance. So you have your already existing NW 7.0 ABAP stack in a separated Cluster Group, and you create a new Cluster Group for your new Java system.
You can find more information about it in this guide here on SDN:
Link: [High Availability;
More information about High Availability Setups for SAP System can be found here on SDN:
Link: [High Availability]
If you want to use the same database for your clustered ABAP stack and your new Java stack you can do a MCOD installation.
Please see Link: [SAP Note 388866 - Multiple Components on One Database - Installation|https://service.sap.com/sap/support/notes/388866]
Hope this helps.
Best regards,
Mathias

Two prices for one material in sales order according condition type

Hi,
I configure the condition type according to following condition record:
Plant/ Sales Organization/ Distribution channel/ Material / Customer
(because system should calculate two prices for one material in two plants)
In the sales order screen, when user firstly select material , quantity, plant , system calculate the related price correctly but if user select the material and quantity and enter and after that select the plant, system will show the error message in pricing procedure and to have a price for material, user should update the price in the price condition in sales order.
It is so difficult for user to update one by one, because there are several sales orders which need to update.
Is it any way to solve this problem?
Thanks,

> In the sales order screen, when user firstly select material , quantity, plant , system calculate the related price correctly but if user select the material and quantity and enter and after that select the plant, system will show the error message in pricing
Hi,
Why to let the user press Enter button before entering plant value Obviously, system will give error, because it doesnt get all the required value based on which you have maintained condition records.
Ask the user to enter all the value at item level otherwise you will have go for the option that you are doing currently.
It is said prevention is better than cure
Hope you get some inputs
regards,
Sagar

Two address for one company code

Hi SAPians,
I have a doubt in maintaining company address for Invoice output!
Is it possible to maintain two Address for one company code?
Like if XYZ company code and say it has has two customers AB and CD.
Then if i want to maintain Company address on print layout for invoice Different to each. how can i achieve it.
If yes, please through light on it.
Regards,
Romesh

Hi ,
As far i know it is not possible to have two different address for the same company code.As table can hold only single unique data.
As far as the above answer is concerned, we use International version fo Customers not for Company Codes.
Hope it helps.
Thanks and Regards
Rohit.

Fetch New Data shows two entries for one account

I have on a variety of accounts on my iPhone and my iPad: an iCloud, an Exchange, a IMAP, and a couple of Gmail accounts.
Earlier this week, I noticed that in the "Fetch New Data" setting (Settings > Mail, Contacts, Calendar > Fetch New Data), there are TWO entries for one of the Gmail accounts.
One entry lists "Mail and Calendars." I use this for this particular Gmail account. I have these selected in the "Accounts" section of Settings > Mail, Contacts, Calendar.
The other entry lists "Contacts and Calendars." I don't sync Contacts, but I do sync Calendars. Why is it listed twice?
I tried deleting
the offending Gmail account, but it did not delete the duplicate entries.
erasing all settings
all of my accounts, including iCloud, IMAP, and other accounts.
The ghost account is still there, fetching calendars and contacts.
Has anyone else seen this behavior?
I considered erasing settings and content, but that seems pretty extreme for something that might not be that big of an issue.

Exact same problem here!!! Iphone 5s with IOS 7.0.3, using Gmail among other email providers.
So it is definately a bug - the "fetch new data ghost account". I hope it will be solved in a newer release. In the meantime, I switched the ghost account to "manual" so it shouldn't interfere...

Two billing for one sales order for same customer

Dear All ,
I have a requirement of posting a two billings for one sales order.
One is for Sales and another is for commission...
Entry could be
Sales Entry - Db Customer
Cr Sales
Commission entry could be
Db - Cusomter
Cr- Sales commission income account (P/L)
We are having third party sales scenario , In this case billing is MIRO dependent.
Once the miro is done then only billing is possible ...
Could you please advise on that ..
Regards,
Sukh

Dear Ratish,
Thanks for yr reply.
I already did that but it is not serving business purpose.
Comm payment - comes diff time than sales payment.
so ,I will post one entry customer will get hit with total amount Sales + commission
like below
Let say 10, 000 is the sales value and 500 is the commission
So , This entry will get posted
Customer Db- 10,500
Sales Cr- 10,000
Comm Income Cr- 500
But, As I said sales amt will be paid before so We need to clear it partially and some time customer pays also diff amount due to some defect.
So, We wont be knowing for which case we have or havnet received the payment against commission.
As , Customer account is got hit with total amount( Sales+ Comm..value).
Pls advise how to solve this.
Regards,
Sukh

Listener - Two Services for Each Instance

Oracle 11r2g was installed on a Linux SO. Everything is working, but when I check the Listener Services I got this status:
lsnrctl services
Service "S060" has 1 instance(s).
Instance "S060", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:86 refused:0
LOCAL SERVER
Service "S060.domain" has 1 instance(s).
Instance "S060", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:1289 refused:0 state:ready
LOCAL SERVER
There are Two Services for Each Instance. Is it normal or do I have to check anything else?
Thanks in advance.

910492 wrote:
Oracle 11r2g was installed on a Linux SO. Everything is working, but when I check the Listener Services I got this status:
lsnrctl services
Service "S060" has 1 instance(s).
Instance "S060", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:86 refused:0
LOCAL SERVER
Service "S060.domain" has 1 instance(s).
Instance "S060", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:1289 refused:0 state:ready
LOCAL SERVER
There are Two Services for Each Instance. Is it normal or do I have to check anything else?
Thanks in advance.Pretty normal. The "unknown" is the static registration coming from the SID_LIST entry in the listener.ora file. The "ready" is the dynamic registration from the db instance itself.

LMS 4.2 - Two notifications for one alarm.

Currently when a device, say a router goes offline we receive two Active 'Unresponsive' alarms for the router and then when it comes back online we receive two Cleared 'Unresponsive' alarms. All have their own unique Event ID. (shown below)
I was wondering if anyone could help me to config LMS to send only one Active 'Unresponsive' notification when a device is offline and then one Cleared 'Unresponsive' when the device is back online.
Here's an example of the Active 'Unresponsive' alarms I receive when I power the router off:
Notification 1
EVENT ID               = 0002BI5
TIME                   = Thu 29-Nov-2012 15:26:32 EST
STATUS                 = Active
SEVERITY               = Critical
MANAGED OBJECT         = router.domain
MANAGED OBJECT TYPE     = Routers
EVENT DESCRIPTION       = Unresponsive::Component=172.16.1.254 [router.domain];ComponentClass=IP;ComponentEventCode=1098;InterfaceType=ETHERNETCSMACD;InterfaceMode=NORMAL;InterfaceAdminStatus=UP;Address=172.16.1.254;IPStatus=TIMEDOUT;InterfaceOperStatus=UP;Ne
CUSTOMER IDENTIFICATION = COMMS TEAM
CUSTOMER REVISION       = 1
NOTIFICATION ORIGINATOR = Fault Management Module
Notification 2
EVENT ID               = 0002BI6
TIME                   = Thu 29-Nov-2012 15:26:57 EST
STATUS                 = Active
SEVERITY               = Critical
MANAGED OBJECT         = router.domain
MANAGED OBJECT TYPE     = Routers
EVENT DESCRIPTION       = Unresponsive::Component=router.domain;ComponentClass=Router;ComponentEventCode=1101;SystemObjectID=.1.3.6.1.4.1.9.1.569;Description=Cisco IOS Software, C870 Software (C870-ADVIPSERVICESK9-M), Version 12.4(15)T13, RELEASE SOFTWARE (
CUSTOMER IDENTIFICATION = COMMS TEAM
CUSTOMER REVISION       = 1
NOTIFICATION ORIGINATOR = Fault Management Module
Any suggestions?

Am I alone with this issue of receiving two notifications for one Unreachable event?

Two titles for one screen

Hi Everyone,
Is it possible to give two titles for one dialog screen.
Based on a grid i perform centain things where the user has to enter the values in the dialog screen.
To this screen i want to title based on the which grid it is. Is it possible to do.
Can anyone help me on this.
Thanks,
Prabs.

when you define the title bar (to be used with set title bar)
enter the text with place holders like below.
& & my &
later in your program you can supply text for & using set title bar.
set titlebar 'MYTITLE' with 'This' 'is' 'test' .
This would produce title bar as
This is my test
set titlebar 'MYTITLE' with 'Where' 'is' 'Title' .
This would produce title bar as
Where is my Title.
Hope this is clear.
Regards
Raja

How to create two respone for one request

Hi
is there any way for us to create two response for one request
the scenario is as below
1. user click on update button for particular record in the datatable (
after its get updated and status get updated = 'UPDATED' it will remove the object from ObjectListDataProvider and clear the tablePhaseListener ).
2. After it gets updated successfuly , i want to prompt the user with generateExcel function which using response.getOutputStream() using Apache POI.
How can we combine 1 and 2 together
Here what i have tried and didnt work
1. i tried to put the generateExcel function in destroy() method after page is rendered but it gives me Exception
2. i tried to put the generateExcel function in prerender() method
but the page will only execute the generateExcel function
- the data still get updated to the database but it doesnt refresh the page ( i meant the removing object and tablephaseListener.clear() doesnt work )
3 . i tried to put generateExcel Function after it process the data
public String updateData()
       //update data
       if(success){
            // prompt user to save excell sheet
        return null;
     }This one also doesnt work and gives the same behaviour as number 2
The Prompt to save excel sheet still gets popped up
but the page just doesnt get refreshed
Thanks
is anybody know the workaround?

yea i did set some alert message and clear the table by calling
provider.removeRow and commitChanges
it just doesnt reflected in the page that we see
by actually is already removing the row from the provider
Thanks

Two invoices for one sales order

I want to create two invoices for one sales order
Scenario is like to create sales order for value of 100 $, and I want to send order reference billing after saving the sales order for 10% of order amount
I would say 10% of 100 $
And after delivery I want to issue a invoice for 90 %( rest of the amount) which is delivery relevant invoice.
Both invoices will be relevant of accounting.
Would any body suggest this, how it would be mapped it in to SAP.

Hi Suresh,
It is possible in Partial billing. Maintain the Billing plan and create a plan with the inputs as u specified.
Go to IMG-SD-Billing-Billing plan. Do ur own configuration for Billing plan.
Now in Sales document creation mode....header details-Billing plan, U block the billing schedules and as per ur requirement , remove the billing block and create billing document.
If u configured Account detrmination procedure, U wld get the accounting document wrt billing document.
Hope this wld help U.
Regards,
Praveen

Can we create two Filters for one cube

Hi all,
I created two filters for one cube (in 11v), I assigned this filters to one user in shared services , so which filter work,
I think ,We have to assign only one filter for one user , please i need clarification....
Thanks
Edited by: user98631 on 12 mars 2010 05:13

You can create many filters for one cube. I usually associate one group per filter and a user can have one or more groups assigned to them. Can't remember what happens when a user has access to conflicting filters (i.e. the order of preference). It is in the DBAG I am sure though.

TS1424 Hello! Tell me, why I paid two times for one game? Stray Souls: Dollhouse Story - Collector's Edition HD, Collector's Edition???

Hello! Tell me, why I paid two times for one game? Stray Souls: Dollhouse Story - Collector's Edition HD, Collector's Edition???

Check your purchase history. The second charge may be for unlocking someting in the game or might be in-game items.

Why are there two ns-httpd processes running for one instance of iws 6

Hi all,
I'm used to iWS 4.x where there's only one watchdog and one ns-httpd process running for any given install of iWS. Now in iWS 6.x I noticed there are two processes for the admin server and two processes for the actual single web server instance, along with two watchdogs.
What are the extra web server instances doing? I noticed that there is a 'parent' relationship with the pid's, so I guess one is spawning the other, but why? If it's to have persistent state over restart, isn't that what uxwdog is for?
Thanks in advance,
James Huang

goldeye wrote:
$ ps -ef|grep ns-httpd
root 5612 5611 0 May 09 ? 2:22 ns-httpd -d /u00/iplanet/server6/https-admserv/config
root 5613 5612 0 May 09 ? 5:30 ns-httpd -d /u00/iplanet/server6/https-admserv/configThis is Administration Server
root 22940 22939 3 May 16 ? 155:11 ns-httpd -d /u00/iplanet/server6/https-eagnmnsu24f.xxxx.gov/config
nobody 23040 22940 0 May 16 ? 136:35 ns-httpd -d /u00/iplanet/server6/https-eagnmnsu24f.xxxx.gov/configThis is Web Server instance.
Can you send the output of ps -ef|grep iplanet ?
iplanet Web Server is very old please move to latest Web Servers.
You can download latest Web Servers from [http://www.sun.com/download/index.jsp?cat=Web%20%26%20Proxy%20Servers&tab=3&subcat=Web%20Servers].
Please use either of the two
Sun Java System Web Server 7.0 update 5 (release notes are located @ [http://wikis.sun.com/display/WebServerdocs/Release+Notes]) or
Sun ONE web Server 6.1 SP11 ( release notes are located @ [http://docs.sun.com/app/docs/doc/820-7659]).
Migration Guide will help you in migration [http://wikis.sun.com/display/WebServerdocs/Installation+and+Migration+Guide] or let us know if you have any problems.
When I start Sun Java System Web Server 7.0 or Sun ONE 6.1 Server instance, I can see one watchdog and two webservd processes :
$ps -ef|grep /export2
user 7967 7966 ... webservd -r /export2/ws -d /export2/ws/https-....
user 7966 7965 ... webservd -r /export2/ws -d /export2/ws/https-...
user 7965 1 ... ./webservd-wdog -r /export2/ws -d /export2/ws/https-...

How to print two sides with one page?

I have a PDF that is one page long and I'd like to print the same thing twice (front and back) on one page. Can I do that?
I've tried printing two copies with the printer set to double-sided, but it just printed two sheets with one side on each sheet.

Well sure; Go back to the authoring application that created the documents and do a 2-UP page. Make the existingg page large enough to accomodate the extra content. Is that what you're asking or do you really mean print to a printer with a back up ? In that case just flip the page over and print page 2 on the other side.
Or are we missing something ?

Two sids for One instance

Similar Messages

Maybe you are looking for