Two Site Single Organization with 2010 and 2013

Would like to clarify  the below queries / reference architecture.
Single Forest - Single Organization is it feasible to create another Lync Site under a different child domain?
Original site runs on an older version and new child domain site runs on 2013 with data centres across the WAN. What all will be the challenges / dependency in this scenario and what data replication will be required?

Hi,
It is the supported scenario for Lync Server environment.
1. Firstly, you need to add the Lync Server 2013 Pool in the existed Lync topology. 
2. Then publish the topology.
 3. Prepare ADDS. You need to prepare schema and forest in the root domain, and prepare domain in which the child domain you deploy Lync Server 2013. I suggest you to do it by Lync Server Management Shell.
4. Install or Update Lync Server System
Best Regards,
Eason Huang
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Eason Huang
TechNet Community Support

Similar Messages

  • ActiveSync with 2010 and 2013 coexistance

    I have setup Exchange 2013 within my network that has Exchange 2010 already running.  Everything is working with coexistance exept for ActiveSync.  
    A user can access OWA just fine it shows the Exchange 2013 login but direct them to the mailbox of 2010 fine.  
    I have created a new user under 2013 and migrated a user from 2010 to 2013 and with either of them I can access active sync just fine.  So if the user is in the 2013 database it works fine.  Its the proxy or redirect to 2010 that isn't
    working.  
    The log appears to show the connection and then has a error of 500.  See here.
    2015-01-13 13:06:32 192.168.128.5 POST /Microsoft-Server-ActiveSync/default.eas User=rogerssa&DeviceId=ApplDNQLK1S3FF9R&DeviceType=iPhone&Cmd=Ping&CorrelationID=<empty>;&ClientId=DESTC9PC0KXF0GJ0HZA&cafeReqId=ea63a976-9574-4ebc-b508-dcb4fd213e18; 443
    domain\rogerssa 50.158.150.99 Apple-iPhone6C1/1201.365 - 500 0 0 46
    2015-01-13 13:06:32 192.168.128.5 POST /Microsoft-Server-ActiveSync/default.eas User=rogerssa&DeviceId=ApplDNQLK1S3FF9R&DeviceType=iPhone&Cmd=Ping&CorrelationID=<empty>;&ClientId=DESTC9PC0KXF0GJ0HZA&cafeReqId=c144c115-d97f-41d4-96f4-dd132c227db3; 443
    domain\rogerssa 50.158.150.99 Apple-iPhone6C1/1201.365 - 500 0 0 31
    If I could just get this fixed it would make my migration move along.

    Can you check if the authentication methods in both CAS (2010 and 2013) are equal? If there are different methods, the AES connection will fail and drop the error 500.
    If that is not the issue, please use the site http://www.exrca.com and upload the results to th thread.
    Have a nice day!
    Microsoft Premier Field Engineer - http://www.comunicacionunificada.cl

  • OWA receives mail long before Outlook (Exchange 2013 with Outlook 2010 and 2013)

    I recently upgraded my Exchange environment to Exchange 2013 SP1. The Outlook users are now experiencing a delay when receiving email. When they do arrive they appear in batches, often 20-45 minutes after they were sent, from a mailbox on the same server.
    Additionally, the mail appears instantly when you monitor the inbox using OWA. The users are experiencing this on both Outlook 2010 and 2013 clients configured in both cached and non-cached modes. This appears to be a problem with Outlook connecting to Exchange.
    Any suggestion about how to correct this would be greatly appreciated. Thanks!

    Hi,
    From your description, when users use OWA, they can receive emails normally. But if they use Outlook 2010 or Outlook 2013, there is a delay in receiving emails.
    I recommend you use the Outlook safe mode to determine whether the problem is caused by add-ins. Also, please make sure users have installed the Outlook latest Service Pack.
    If the issue persist, please create a new profile and check the result.
    Hope it helps.
    Best regards,
    Amy Wang
    TechNet Community Support

  • Lync Phone Edition coexistance with lync 2010 and 2013

    Hi Everyone
    I am currently planning a coexistent network between Lync 2010 and 2013 as I need to get 2013 out urgently. My question is around the Lync phone edition and how to get the phone to find the front end to register the phone to depending on which lync
    pool the user is configured to use. Right now all phones are configured with DHCP and are configured to use the 2010 front end server to get its cert provisioned. I also use the HP 4110 and 4120 phones in the office.
    How should I configure DHCP so that I do not cut my user off if they are moved the 2013 pool?
    Many Thanks
    Joe
    Joe

    Hi,
    Check this old Thread
    https://social.technet.microsoft.com/Forums/office/en-US/fca0b7be-124e-4480-ba2f-19ca4eebbd53/phone-edition-aries-polycom-cx600-coexistence-lync-2010-and-2013?forum=lyncvoice
    http://unifiedme.co.uk/2013/09/lync-2010-2013-migration-lync-phone-edition-devices/
    Whenever you see a helpful reply, click on Vote As Helpful & click on Mark As Answer if a post answers your question.

  • Phone edition Aries Polycom CX600 coexistence - Lync 2010 and 2013

    Hi all,
    Currently busy with a Lync 2010 > 2013 migration where Aries Lync phones like Polycom CX 600 (using a blend of USB tethering, PIN authentication as well as common area phones) are involved. Phones have a blend of different CU releases ranging from .4066
    (CU5) to .4451 (CU14)
    User migration must be done in stages. That’s presenting a challenge in that Lync 2010 and 2013 must coexist for some time, yet providing seamless support for Lync phones.
    The normal migration scenario will be based on a site-by-site migration: users are moved from 2010 to 2013, DHCP options for that site are changed to provide relevant Lync phones  the new Lync 2013 pool parameters. HOWEVER, there is a considerable number
    of users travelling across sites, and it’s likely occurrence that a user still on 2010 would travel to a site migrated to 2013 (including phones). And the other way round can also occur.
    Based on this, my questions are:
    1) Can a Lync 2010 user sign-in (USB tethering) on a phone if DHCP is providing options for Lync 2013?
    2) Can a Lync 2010 user sign-in (PIN auth) on a phone if DHCP is providing options for Lync 2013?
    3) Can a Lync 2013 user sign-in (USB tethering) on a phone if DHCP is providing options for Lync 2010?
    4) Can a Lync 2013 user sign-in (PIN auth) on a phone if DHCP is providing options for Lync 2010?
    Also, is there any dependancy on a specific CU version for the sign-in process to succeed? Note all discovery records are strict domain matching compliant. 
    I was hoping LPE would feature a redirect mechanism like with desktop client but based on the very little specific literature available, that does not seem the case. Any advice would be very welcome.
    thanks all.
    Alessio Giombini | Microsoft Solutions Architect | Twitter: @AlessioGiombini
    Lync 2013 Detailed Design Calculator: try it at http://goo.gl/jU1hZR

    Hi,
    You can refer to the following link of “Lync 2010 – 2013 Migration: Lync phone edition devices”:
    http://unifiedme.co.uk/2013/09/lync-2010-2013-migration-lync-phone-edition-devices/
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
    Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • Outlook 2010 and 2013 are unable to connect but OWA (and mail routing) works fine

    Hi-
    Not sure why but this past Sunday (just after DST adjustment) outlook clients (using 2010 and 2013) were unable to connect to an Exchange 2013 server.  OWA and mail routing (internal and external) is working fine.  I've even tried on multiple machines
    and all of them experience the same issue.  On a new machine with a fresh version of outlook 2013 installed here is what happens:
    Click on Outlook 2013
    Click Next until the account setup is displayed.
    Name and email is auto-populated
    Established network connection is good
    Searching for email address settings is good (once the self-signed exchange 2013 cert is accepted)
    And then the logging onto the mail server fails.  The first pop-up is:
    The Connection to Microsoft Exchange is unavailable.  Outlook must be online or connected to complete this action.
    Clicking "OK" is followed up with a window with the Microsoft Exchange connection info.
    It lists Microsoft Exchange server which is populated with: GUID@<domain suffix>
    Mailbox which is populated with: =SMTP:<Valid Email address>
    On the Exchange Server I have noticed that the Web Management Service (WMSVC) is stopped and will not start.  Starting the service outputs:
    EventID 7024
    "The Web Management Service terminated with the following service-specific error:  Unspecified error"
    Not really helpful :)
    Since this is only happening with Outlook on multiple clients I'm expecting something with Exchange or the ability for outlook to connect to exchange.
    Thanks in advance!

    Hi
    I know this is an old post, but I'm having a very similar issue. I have CU6 installed and all other client connectivity apart from internal Outlook connectivity is working fine. I have distributed the new Self-Signed Certificate and the tested to verify
    the clients trust it. I have tried on multiple machine with multiple accounts and none of them connect.
    I'm at the stage of reinstalling, but I would rather troubleshoot the problem, just in case ever hit the same wall in the future. I have run Test-OutlookConnectivity with the following output;
    RunspaceId         : 71f8d740-c499-4bbe-8baf-9cbb12566fb8
    Server             : PW-SC-01.companyname.local
    MonitorIdentity    : Outlook.Protocol\OutlookRpcDeepTestProbe\NEW2013
    RequestId          : 75641e34-aa49-4fce-aad7-181b56dd7b29
    ExecutionStartTime : 10/11/2014 13:50:03
    ExecutionEndTime   : 10/11/2014 13:50:03
    Error              : Error 0x6ba (The RPC server is unavailable) from ClientAsyncCallState.CheckCompletion: 
                         RpcAsyncCompleteCall 
                         EEInfo: ComputerName: n/a
                         EEInfo: ProcessID: 14544
                         EEInfo: Generation Time: 2014-11-10 13:50:03.737
                         EEInfo: Generating component: 2
                         EEInfo: Status: 0x000006BA
                         EEInfo: Detection location: 1710
                         EEInfo: Flags: 0
                         EEInfo: NumberOfParameters: 1
                         EEInfo:    prm[0]: Long val: 0 (0x00000000)
                         EEInfo: ComputerName: n/a
                         EEInfo: ProcessID: 14544
                         EEInfo: Generation Time: 2014-11-10 13:50:03.737
                         EEInfo: Generating component: 13
                         EEInfo: Status: 0x000006BA
                         EEInfo: Detection location: 1352
                         EEInfo: Flags: 0
                         EEInfo: NumberOfParameters: 1
                         EEInfo:    prm[0]: Long val: -1073606646 (0xC002100A)
                         EEInfo: ComputerName: n/a
                         EEInfo: ProcessID: 14544
                         EEInfo: Generation Time: 2014-11-10 13:50:03.737
                         EEInfo: Generating component: 14
                         EEInfo: Status: 0xC002100A
                         EEInfo: Detection location: 1380
                         EEInfo: Flags: 0
                         EEInfo: NumberOfParameters: 2
                         EEInfo:    prm[0]: Long val: 12175 (0x00002F8F)
                         EEInfo:    prm[1]: Unicode string: /rpc/rpcproxy.dll?PW-SC-01.companyname.local:6001
                         EEInfo: ComputerName: n/a
                         EEInfo: ProcessID: 14544
                         EEInfo: Generation Time: 2014-11-10 13:50:03.737
                         EEInfo: Generating component: 14
                         EEInfo: Status: 0x00010000
                         EEInfo: Detection location: 1385
                         EEInfo: Flags: 0
                         EEInfo: NumberOfParameters: 2
                         EEInfo:    prm[0]: Long val: 8 (0x00000008)
                         EEInfo:    prm[1]: Binary Buffer: [48-1263-10248-1262-126-9632122164676121-3988104-118-11373-61-94
                         -111-112-98-1217048136942-12272-122-91311550483449324830638543192311910198979999101115115461121199
                         91111091091154699111461171074830231349524949485349505348484990231349574949485349505348484990483449
                         324830638543192311910198979999101115115461121199911110910911546991114611710748-12613448136942-1227
                         2-122-913111503-126115048-1261102-126110-22103-15-109-16-121-119-3121-4-106119-119-9369122-5779121
                         719-98-24-67-32918-98-236-19-10715326827-76102-61100108-12718-438331-37109-102-57-9942-11389-10374
                         -77-5-4-107109-11847342222-63-48-7468-17-1067033-56111-33-54-16-105-62-76-1282011-1664-12158-4915-
                         88-53-9-29-2994-49-54-5211-1364-212121-12396-127-353-396185117-681229-434246070-109818119-4858-128
                         -106-1279248-49110-44-81-121494199-118-17-106-71106828294-93-110-110-106-415084-127126-45-12331421
                         -61-2757-24-128-28-25111-52113121-56-98-5821527282-47255245104-111-55-1099747-115-11172-287-12526-
                         79-12430-119421360-107-6430-5410282-52-51-128533354-116672757-77-75-111-72-118-10114-84484825-40-1
                         8-70-24-9111-61-5391-8034125-12632-16-19-128112030-8-427523101-93-127-5348-127-5648146385291511-14
                         4325-9648-127-110638529174-127-11848-127-121-12623119101989799991011151154611211999111109109115469
                         911146117107-1262211211945115994548494611211999111109109115461081119997108-12626651171161116810511
                         59911111810111446808767111109109115461081119997108-12626651171161116810511599111118101114468087671
                         11109109115469911146117107-12613808767111109109115461081119997108-12613808767111109109115469911146
                         11710748196385293741248106843615573148126385291911-14248048136942-12272-122-913115503-12611081-930
                         6613-74953718-12745-14-25-94107-80-5-45-2231536-1728-12897-8587577-1252765-892896-83-10267-7926-20
                         -9841-1079-12-29-4315671111357-684036-40-5129-91-24-461066-12306-65-9118-89115191071-30-20-1067161
                         -83-91-74105-931649-48-96126-13-71-118-8967567-40-64-104-113-31-51-102357125100-50113-103-113123-9
                         873-627067-25-908-10131118125122-71-115-37-1850-1055851-31410-77-7312-36848124-26104-10711043-2048
                         -48-12666611759121127-2960-1571-9-95-98-1036911610-74221-32-25114-108749933-7147562114-3635-101-81
                         -1058-73108-61-78-128-116-715155112714-37-18-84-8331-2716-1174257-76-5-1598-15-12875-98-7329632178
                         -10714-123-6312212-1028359-56-76-683-873987-2120-845954-7617-71-57999828110], size=926
    Exception          : Microsoft.Exchange.Rpc.ServerUnavailableException: Error 0x6ba (The RPC server is unavailable) 
                         from ClientAsyncCallState.CheckCompletion: RpcAsyncCompleteCall 
                         EEInfo: ComputerName: n/a
                         EEInfo: ProcessID: 14544
                         EEInfo: Generation Time: 2014-11-10 13:50:03.737
                         EEInfo: Generating component: 2
                         EEInfo: Status: 0x000006BA
                         EEInfo: Detection location: 1710
                         EEInfo: Flags: 0
                         EEInfo: NumberOfParameters: 1
                         EEInfo:    prm[0]: Long val: 0 (0x00000000)
                         EEInfo: ComputerName: n/a
                         EEInfo: ProcessID: 14544
                         EEInfo: Generation Time: 2014-11-10 13:50:03.737
                         EEInfo: Generating component: 13
                         EEInfo: Status: 0x000006BA
                         EEInfo: Detection location: 1352
                         EEInfo: Flags: 0
                         EEInfo: NumberOfParameters: 1
                         EEInfo:    prm[0]: Long val: -1073606646 (0xC002100A)
                         EEInfo: ComputerName: n/a
                         EEInfo: ProcessID: 14544
                         EEInfo: Generation Time: 2014-11-10 13:50:03.737
                         EEInfo: Generating component: 14
                         EEInfo: Status: 0xC002100A
                         EEInfo: Detection location: 1380
                         EEInfo: Flags: 0
                         EEInfo: NumberOfParameters: 2
                         EEInfo:    prm[0]: Long val: 12175 (0x00002F8F)
                         EEInfo:    prm[1]: Unicode string: /rpc/rpcproxy.dll?PW-SC-01.companyname.local:6001
                         EEInfo: ComputerName: n/a
                         EEInfo: ProcessID: 14544
                         EEInfo: Generation Time: 2014-11-10 13:50:03.737
                         EEInfo: Generating component: 14
                         EEInfo: Status: 0x00010000
                         EEInfo: Detection location: 1385
                         EEInfo: Flags: 0
                         EEInfo: NumberOfParameters: 2
                         EEInfo:    prm[0]: Long val: 8 (0x00000008)
                         EEInfo:    prm[1]: Binary Buffer: [48-1263-10248-1262-126-9632122164676121-3988104-118-11373-61-94
                         -111-112-98-1217048136942-12272-122-91311550483449324830638543192311910198979999101115115461121199
                         91111091091154699111461171074830231349524949485349505348484990231349574949485349505348484990483449
                         324830638543192311910198979999101115115461121199911110910911546991114611710748-12613448136942-1227
                         2-122-913111503-126115048-1261102-126110-22103-15-109-16-121-119-3121-4-106119-119-9369122-5779121
                         719-98-24-67-32918-98-236-19-10715326827-76102-61100108-12718-438331-37109-102-57-9942-11389-10374
                         -77-5-4-107109-11847342222-63-48-7468-17-1067033-56111-33-54-16-105-62-76-1282011-1664-12158-4915-
                         88-53-9-29-2994-49-54-5211-1364-212121-12396-127-353-396185117-681229-434246070-109818119-4858-128
                         -106-1279248-49110-44-81-121494199-118-17-106-71106828294-93-110-110-106-415084-127126-45-12331421
                         -61-2757-24-128-28-25111-52113121-56-98-5821527282-47255245104-111-55-1099747-115-11172-287-12526-
                         79-12430-119421360-107-6430-5410282-52-51-128533354-116672757-77-75-111-72-118-10114-84484825-40-1
                         8-70-24-9111-61-5391-8034125-12632-16-19-128112030-8-427523101-93-127-5348-127-5648146385291511-14
                         4325-9648-127-110638529174-127-11848-127-121-12623119101989799991011151154611211999111109109115469
                         911146117107-1262211211945115994548494611211999111109109115461081119997108-12626651171161116810511
                         59911111810111446808767111109109115461081119997108-12626651171161116810511599111118101114468087671
                         11109109115469911146117107-12613808767111109109115461081119997108-12613808767111109109115469911146
                         11710748196385293741248106843615573148126385291911-14248048136942-12272-122-913115503-12611081-930
                         6613-74953718-12745-14-25-94107-80-5-45-2231536-1728-12897-8587577-1252765-892896-83-10267-7926-20
                         -9841-1079-12-29-4315671111357-684036-40-5129-91-24-461066-12306-65-9118-89115191071-30-20-1067161
                         -83-91-74105-931649-48-96126-13-71-118-8967567-40-64-104-113-31-51-102357125100-50113-103-113123-9
                         873-627067-25-908-10131118125122-71-115-37-1850-1055851-31410-77-7312-36848124-26104-10711043-2048
                         -48-12666611759121127-2960-1571-9-95-98-1036911610-74221-32-25114-108749933-7147562114-3635-101-81
                         -1058-73108-61-78-128-116-715155112714-37-18-84-8331-2716-1174257-76-5-1598-15-12875-98-7329632178
                         -10714-123-6312212-1028359-56-76-683-873987-2120-845954-7617-71-57999828110], size=926
                            at Microsoft.Exchange.Rpc.ClientAsyncCallState.CheckCompletion()
                            at Microsoft.Exchange.Rpc.ExchangeClient.ClientAsyncCallState_Connect.End(IntPtr& 
                         contextHandle, TimeSpan& pollsMax, Int32& retryCount, TimeSpan& retryDelay, String& dn
    PoisonedCount      : 0
    ExecutionId        : 63105129
    SampleValue        : 33.5194
    ExecutionContext   :     Mailbox logon verification
                                 EMSMDB.Connect()
                                 Task produced output:
                                 - TaskStarted = 10/11/2014 13:50:03
                                 - TaskFinished = 10/11/2014 13:50:03
                                 - Exception = Microsoft.Exchange.Rpc.ServerUnavailableException: Error 0x6ba (The RPC 
                         server is unavailable) from ClientAsyncCallState.CheckCompletion: RpcAsyncCompleteCall 
                         EEInfo: ComputerName: n/a
                         EEInfo: ProcessID: 14544
                         EEInfo: Generation Time: 2014-11-10 13:50:03.737
                         EEInfo: Generating component: 2
                         EEInfo: Status: 0x000006BA
                         EEInfo: Detection location: 1710
                         EEInfo: Flags: 0
                         EEInfo: NumberOfParameters: 1
                         EEInfo:    prm[0]: Long val: 0 (0x00000000)
                         EEInfo: ComputerName: n/a
                         EEInfo: ProcessID: 14544
                         EEInfo: Generation Time: 2014-11-10 13:50:03.737
                         EEInfo: Generating component: 13
                         EEInfo: Status: 0x000006BA
                         EEInfo: Detection location: 1352
                         EEInfo: Flags: 0
                         EEInfo: NumberOfParameters: 1
                         EEInfo:    prm[0]: Long val: -1073606646 (0xC002100A)
                         EEInfo: ComputerName: n/a
                         EEInfo: ProcessID: 14544
                         EEInfo: Generation Time: 2014-11-10 13:50:03.737
                         EEInfo: Generating component: 14
                         EEInfo: Status: 0xC002100A
                         EEInfo: Detection location: 1380
                         EEInfo: Flags: 0
                         EEInfo: NumberOfParameters: 2
                         EEInfo:    prm[0]: Long val: 12175 (0x00002F8F)
                         EEInfo:    prm[1]: Unicode string: /rpc/rpcproxy.dll?PW-SC-01.companyname.local:6001
                         EEInfo: ComputerName: n/a
                         EEInfo: ProcessID: 14544
                         EEInfo: Generation Time: 2014-11-10 13:50:03.737
                         EEInfo: Generating component: 14
                         EEInfo: Status: 0x00010000
                         EEInfo: Detection location: 1385
                         EEInfo: Flags: 0
                         EEInfo: NumberOfParameters: 2
                         EEInfo:    prm[0]: Long val: 8 (0x00000008)
                         EEInfo:    prm[1]: Binary Buffer: [48-1263-10248-1262-126-9632122164676121-3988104-118-11373-61-94
                         -111-112-98-1217048136942-12272-122-91311550483449324830638543192311910198979999101115115461121199
                         91111091091154699111461171074830231349524949485349505348484990231349574949485349505348484990483449
                         324830638543192311910198979999101115115461121199911110910911546991114611710748-12613448136942-1227
                         2-122-913111503-126115048-1261102-126110-22103-15-109-16-121-119-3121-4-106119-119-9369122-5779121
                         719-98-24-67-32918-98-236-19-10715326827-76102-61100108-12718-438331-37109-102-57-9942-11389-10374
                         -77-5-4-107109-11847342222-63-48-7468-17-1067033-56111-33-54-16-105-62-76-1282011-1664-12158-4915-
                         88-53-9-29-2994-49-54-5211-1364-212121-12396-127-353-396185117-681229-434246070-109818119-4858-128
                         -106-1279248-49110-44-81-121494199-118-17-106-71106828294-93-110-110-106-415084-127126-45-12331421
                         -61-2757-24-128-28-25111-52113121-56-98-5821527282-47255245104-111-55-1099747-115-11172-287-12526-
                         79-12430-119421360-107-6430-5410282-52-51-128533354-116672757-77-75-111-72-118-10114-84484825-40-1
                         8-70-24-9111-61-5391-8034125-12632-16-19-128112030-8-427523101-93-127-5348-127-5648146385291511-14
                         4325-9648-127-110638529174-127-11848-127-121-12623119101989799991011151154611211999111109109115469
                         911146117107-1262211211945115994548494611211999111109109115461081119997108-12626651171161116810511
                         59911111810111446808767111109109115461081119997108-12626651171161116810511599111118101114468087671
                         11109109115469911146117107-12613808767111109109115461081119997108-12613808767111109109115469911146
                         11710748196385293741248106843615573148126385291911-14248048136942-12272-122-913115503-12611081-930
                         6613-74953718-12745-14-25-94107-80-5-45-2231536-1728-12897-8587577-1252765-892896-83-10267-7926-20
                         -9841-1079-12-29-4315671111357-684036-40-5129-91-24-461066-12306-65-9118-89115191071-30-20-1067161
                         -83-91-74105-931649-48-96126-13-71-118-8967567-40-64-104-113-31-51-102357125100-50113-103-113123-9
                         873-627067-25-908-10131118125122-71-115-37-1850-1055851-31410-77-7312-36848124-26104-10711043-2048
                         -48-12666611759121127-2960-1571-9-95-98-1036911610-74221-32-25114-108749933-7147562114-3635-101-81
                         -1058-73108-61-78-128-116-715155112714-37-18-84-8331-2716-1174257-76-5-1598-15-12875-98-7329632178
                         -10714-123-6312212-1028359-56-76-683-873987-2120-845954-7617-71-57999828110], size=926
                            at Microsoft.Exchange.Rpc.ClientAsy
    FailureContext     : 
    ExtensionXml       : 
    ResultType         : Failed
    RetryCount         : 0
    ResultName         : 75641e34aa494fceaad7181b56dd7b29-OutlookRpcDeepTestProbe/NEW2013
    IsNotified         : False
    ResultId           : 1748063
    ServiceName        : InvokeNow
    StateAttribute1    : Momt
    StateAttribute2    : UnknownIssue
    StateAttribute3    : PW-SC-01.companyname.local
    StateAttribute4    : Unknown
    StateAttribute5    : {C54AD38D-1E00-4F53-ABAE-26518C3FF82F}
    StateAttribute6    : 0
    StateAttribute7    : 0
    StateAttribute8    : 0
    StateAttribute9    : 0
    StateAttribute10   : 0
    StateAttribute11   : Momt
    StateAttribute12   : 
    StateAttribute13   : VgEAVAdXaW5kb3dzQwBBCEtlcmJlcm9zTA9QV0NPTU1TXG5hdGhhbmhVLlMtMS01LTIxLTIwNTc0OTEwMzItMzE4NDA2NDk3OC
                         0xNTQ2MTE0ODM1LTI2MzJHHQAAAAcAAAAtUy0xLTUtMjEtMjA1NzQ5MTAzMi0zMTg0MDY0OTc4LTE1NDYxMTQ4MzUtNTEzBwAA
                         AAdTLTEtMS0wBwAAAAdTLTEtNS0yBwAAAAhTLTEtNS0xMQcAAAAIUy0xLTUtMTUHAADAE1MtMS01LTUtMC0zNDc3ODcxMTMHAA
                         AALlMtMS01LTIxLTIwNTc0OTEwMzItMzE4NDA2NDk3OC0xNTQ2MTE0ODM1LTQxODcHAAAALVMtMS01LTIxLTIwNTc0OTEwMzIt
                         MzE4NDA2NDk3OC0xNTQ2MTE0ODM1LTUxMgcAAAAuUy0xLTUtMjEtMjA1NzQ5MTAzMi0zMTg0MDY0OTc4LTE1NDYxMTQ4MzUtND
                         E3NAcAAAAuUy0xLTUtMjEtMjA1NzQ5MTAzMi0zMTg0MDY0OTc4LTE1NDYxMTQ4MzUtMzU3MAcAAAAuUy0xLTUtMjEtMjA1NzQ5
                         MTAzMi0zMTg0MDY0OTc4LTE1NDYxMTQ4MzUtNDEyMgcAAAAuUy0xLTUtMjEtMjA1NzQ5MTAzMi0zMTg0MDY0OTc4LTE1NDYxMT
                         Q4MzUtMTE2NAcAAAAuUy0xLTUtMjEtMjA1NzQ5MTAzMi0zMTg0MDY0OTc4LTE1NDYxMTQ4MzUtMTE0MQcAAAAuUy0xLTUtMjEt
                         MjA1NzQ5MTAzMi0zMTg0MDY0OTc4LTE1NDYxMTQ4MzUtNDE1MwcAAAAuUy0xLTUtMjEtMjA1NzQ5MTAzMi0zMTg0MDY0OTc4LT
                         E1NDYxMTQ4MzUtNDE0NQcAAAAtUy0xLTUtMjEtMjA1NzQ5MTAzMi0zMTg0MDY0OTc4LTE1NDYxMTQ4MzUtNTE4BwAAAC5TLTEt
                         NS0yMS0yMDU3NDkxMDMyLTMxODQwNjQ5NzgtMTU0NjEx
    StateAttribute14   : 
    StateAttribute15   : 
    StateAttribute16   : 0
    StateAttribute17   : 0
    StateAttribute18   : 0
    StateAttribute19   : 0
    StateAttribute20   : 0
    StateAttribute21   : /o=companyname/ou=first administrative group/cn=Recipients/cn=NathanH
    StateAttribute22   : EMSMDB.Connect()
    StateAttribute23   : https://pw-sc-01.companyname.local:444/rpc/rpcproxy.dll?PW-SC-01.companyname.local:6001
    StateAttribute24   : Negotiate
    StateAttribute25   : [33]10/11/2014 13:50:03 [FAILED!] EMSMDB.Connect(); 
    Identity           : fcd6159dd8fe42aebf10100cc4934356
    IsValid            : True
    ObjectState        : New

  • How to enable the SharePoint 2010 and 2013 Developer Dashboard for specific WebApplication or Sitecollection?

    How to enable the SharePoint 2010 and 2013 Developer Dashboard for specific Web Application or Site collection(not for all Web Application)?
    Vishal Goyal

    Hi Vishal,
    I don't think there is option for specific site collection or web application,but there is option of enabling developer dashboard on specific master pages and that is one on of the way you could do it.
    look article on below link to enable developer dashboard on specific master pages
    https://msdn.microsoft.com/en-us/library/office/ff512745%28v=office.14%29.aspx?f=255&MSPPError=-2147217396
    Let me know if this helps.
    Thanks
    Bhism 

  • Hebrew typing problem in Word 2010 and 2013 in Windows 7 64bit

    Hello,
    When I am trying in Word (2010 and 2013 32bit installation) to edit a line (inserting a new word for instance in the middle of the line) or start a new line in RTL or LTR Hebrew paragraph I must first type the SPACE char and then to type any other letter. When
    I try firs to type a regular letter it is not typed.
    It happens only if the Word is installed on a Windows 7 professional 64bit version on my HP 8570p laptop. I formatted the laptop and installed the same OS but 32bit, installed the Office 2010 and the Word works perfect in any language. I formatted the Laptop
    again, re-installed again the 64bit OS, installed the Office 2010 again and same symptom - cant type Hebrew letters if not starting with SPACE. If I try to edit the same paragraph with English letters it works OK. When I start a new line with English letters
    it works OK. It seem that this symptom happens when the type direction is right-to-left (after ALT-right SHIFT stroke).
    This symptom is only in Word. In PowerPoint, in Excel or any other Office application it works fine.
    When using Word 365 (not installed localy even I have a local Word 2013 installation) the Hebrew typing is working fine.
    I didn't change the default setting options of the Word not after installing the 32bit OS nor the 64bit OS.
    I prefer to use the 64bit OS and not the 32bit OS so I do not consider moving to 32bit OS.

    Hello,
    When I am trying in Word (2010 and 2013 32bit installation) to edit a line (inserting a new word for instance in the middle of the line) or start a new line in RTL or LTR Hebrew paragraph I must first type the SPACE char and then to type any other letter. When
    I try firs to type a regular letter it is not typed.
    It happens only if the Word is installed on a Windows 7 professional 64bit version on my HP 8570p laptop. I formatted the laptop and installed the same OS but 32bit, installed the Office 2010 and the Word works perfect in any language. I formatted the Laptop
    again, re-installed again the 64bit OS, installed the Office 2010 again and same symptom - cant type Hebrew letters if not starting with SPACE. If I try to edit the same paragraph with English letters it works OK. When I start a new line with English letters
    it works OK. It seem that this symptom happens when the type direction is right-to-left (after ALT-right SHIFT stroke).
    This symptom is only in Word. In PowerPoint, in Excel or any other Office application it works fine.
    When using Word 365 (not installed localy even I have a local Word 2013 installation) the Hebrew typing is working fine.
    I didn't change the default setting options of the Word not after installing the 32bit OS nor the 64bit OS.
    I prefer to use the 64bit OS and not the 32bit OS so I do not consider moving to 32bit OS.

  • Language pack resource files in SharePoint 2010 and 2013

    Hi,
    We are translating the Language pack for SharePoint 2013 in Albanian language.
    Comparing to SharePoint 2010 resource files, there are less of them in SharePoint 2013 but they are bigger in size. Are they merged and in that case which of them are merged? Any other info relating to this issue would help
    me a lot.
    Thanks,

    Hi,
    Although the 2010 and 2013 are different versions, most of the files contain the same words. I just thought that maybe someone knows if and if yes, which of the files are joined together in 2013 since there are less files in 2013 but bigger in size. All
    this because that Albanian LP doesn't exist and we have to translate another LP. 
    If someone has had experience in translating Language Packs in SharePoint 2010 or 2013, any information would help me a lot.
    Thank you

  • Why do have several folders entitled Mackintosh  HD dating between 2010 and 2013 in my trash box?

    went to empty my trash on the IMac and it contains folders between 2010 and 2013 called Mackintosh HD. Eac folder shows lots of other folders. It stated there were 118 files but when I started to empty the trash it was going up to over 127,009 files before I cancelled it. Am scared that if this trash emptying is done it is going to wipe the whole computer.
    Can anyone help please?

    I restored the macbook from a time machine backup. Everything seems to work fine. Disk scans don't show errors and the weird sounds during shutdown are gone...
    I still don't really trust the hard drive, though.

  • Exchange 2010 and 2013 coexistence Internal and external URL

    Hi all,
    been reading alot of threads about Outlook anywhere and virtual directories in co-existence exchange 2010 and 2013.
    Still i dont get any smarter.
    Here is scenario:
    Exchange 2010
    Cas1
    Cas2
    Mailbox1
    Mailbox2
    Casarray is Exchange.casarray,com ( internal dns pointed to CAS1 in exchange 2010).Seems like by default both exchange 2013 cas servers are added to the casarray.
    Exchange 2013
    CAS+Mailbox
    Cas+Mailbox
    DNS
    mail.exchange.com pointing to VIP (kemp loadbalancer)
    Autodiscover ( pointed to same vip ,kemp load balancer)
    Outlook anywhere on all servers (2010 and 2013)
    Internal ( pointing to VIP on Kemp)
    External ( pointing to external IP,then it passes firewall that again passes to kemp)
    Problem we are having is when migrating users from Exchange 2010 - 2013.
    Users using Outlook 2010
    restart of outlook and mail  works fine.
    OWA works fine
    Active sync fails ( need to inherit permission of users AD object),wait couple of hours then mobile can sync again.)
    Users using Outlook 2013
    Outlook in disconnected status,only fix is to create new profile.
    OWA works fine
    Active sync fails ( need to inherit permission of users AD object),wait couple of hours then mobile can sync again.)
    Question is,what should be set for internal and external url (active sync,owa,ews)on 2010 and 2013 servers?
    Where is the config wrong?
    Thanks!
    Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Off2work

    Hi Martina,
    did the test as mentioned,even tried both CAS 2013 servers.Flush and registerdns didnt help.
    Still Outlook is Connected to the cas.exchange.as (which again Points to 1 of Exchange 2010 servers),
    Tried repair Outlook profile,no og.Only fix is to setup New account.
    Any more tips?
    thanks!
    Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Off2work

  • Can Password Reset Work for Non Domain MS Outlook (2007, 2010 and 2013) Clients? NOT OWA, Please

    Hi All,
    I migrated from Exchange 2007 to Exchange 2013. I have configured expired password reset and it works fine on OWA (for both internally and externally accessed users) and all computers joined to my domain running MS Outlook clients. However, my users wants
    it to work for all MS Outlook client of computers not joined to my domain.
    How can I go about this? Does expired password reset work on MS Outlook client (2007, 2010 and 2013) computers not joined to the domain?
    Please, help

    Hello,
    Based on my known, I'm afraid that there is no way to reset expired password if your Outlook client computers not joined to the domain.
    For external users, we only reset password via owa.
    If you have any feedback on our support, please click
    here
    Cara Chen
    TechNet Community Support

  • Lync 2010 and 2013 coexistence - DNS

    Hi all,
    we are planning to upgrade from Lync server 2010 to 2013.During this mode,what is best to do regarding DNS?
    Should we just keep existing ones and let Lync server proxy users, or do we need to point dns (internal and external) to the new 2013 server?
    Like in Exchange 2010 and 2013 coexistence we had to point all dns to 2013 server,or users wont be proxied.
    These are the DNS:
    lyncdiscoverinternal
    meet,dialin,admin
    _sipinternaltls._tcp.domain.com
    _sipfederationtls._tcp
    sip.domain.com
    Other DNS i might forgot?
    thanks!
    Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Off2work

    If you don't want to cut everyone over at once, you'll need different FQDNs for external web services between the pools, because mobility and meetings will use them both, regardless of where lyncdiscover and meet point. 
    If you want to keep the same name, that's fine, but you'll have to cut over in one big shot.
    Also, pick a different name for the internal vs external web services.  Mobility uses the external name, even when connecting on internal WiFi, so you'll want to redirect requests on port 443 to port 4443 for that and make it available internally. 
    If you have the same name for the internal web services, then internal requests will also use that path, which can cause issues or at the least route through a reverse proxy for no good reason.
    Correct about pool FQDN being unique, also internal and external web service FQDNs unless you move everyone in one shot and don't care.
    Everything else is pretty much a repoint when you're ready situation.
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
    SWC Unified Communications
    This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Single name space in between Exchange 2010 and 2013

    Hi,
    In my current environment I have 2 Exchange 2010 servers with DAG no CAS NLB. I installed Exchange 2013 with 2 CAS with WNLB and 2 Mailboxes with DAG. The main requirement is to configure Single name space to access in between Exchange 2010 and Exchange
    2013. On Exchange 2010 DAG there is a URL using is owa.domain.com and I also configured in Exchange 2013 all the virtual directories with this name owa.domain.com but having an issue that when I open explorer and use the owa.domain.com URL the user on Exchange
    2013 gets their mailbox but user on Exchange 2010 gets error HTTP 403 blank page.
    I observed that in Exchange Organization settings CAS settings one server OWA, ECP etc shows their internal external URL but the other server unable to open the OWA, ECP URL and give error message that "An IIS directory entry
    couldn't be created. The error message is Access is denied. HResult = -2147024891"
    Please guide how to resolve this issue and use the same name URL in Exchange 2010 and Exchange 2013
    Thanks, 

    Hi,
    See the below brief:
    User will connect to mail.contoso.com as his namespace endpoint. CAS2013 in Site1 will authenticate the user, do a service discovery, and determine that the mailbox version is 2010 and is located within the local AD site. CAS2013 will proxy the
    request to an Exchange 2010 Client Access server which will retrieve the necessary data from the Exchange 2010 Mailbox server
    Go through the full blog for better understanding of the redirection.
    Client Connectivity with Exchange 2013
    Hope you have changed your DNS records to direct connections only to your new Exchange 2013 server. You'll move the host names (for example, mail.contoso.com) users have been using to connect to Outlook Web Access, Autodiscover, and so on, from your
    Exchange 2010 server to your Exchange 2013 server. When an Exchange 2010 user tries to open their mailbox, the Exchange 2013 server will proxy their request and communicate with the Exchange 2010 server on their behalf.
    Configuring DNS includes the following:
    Change the primary host names, such as mail.contoso.com, autodiscover.contoso.com, and owa.contoso.com (if used) to point to the external, publically-accessible, IP address of the Exchange 2013 Client Access server with your public DNS provider.
    Change the primary host names, such as mail.contoso.com (or internal.contoso.com if you're using different internal host names) and owa.contoso.com (if used) to point to the internal machine name of the Exchange 2013 Client Access server on your internal
    DNS servers.
    NOTE- Go through the Exchange Deployemnt Assitant - Configure DNS Records section
    Regards,
    Satyajit
    Please“Vote As Helpful”
    if you find my contribution useful or “MarkAs Answer” if it does answer your question. That will encourage me - and others - to take time out to help you.

  • Lync server 2010 and 2013 coexistence replacing edge servers

    Hi all,
    here is Our current deployment:
    Lync server 2010:
    1 edge
    1 FE
    3 branch sites
    1 Monitoring server
    Lync server 2013:
    3 FrontEnd
    2 Edge
    2 Mediation
    3 Backend
    Simple urls are still point to Legacy (2010) servers.
    External settings of Edge 2013 servers have been define With different name (Access,WEB and AV) and DNS (internally and externally) is pointing to New 2013 servers (via KEMP and TMG).
    ATM 2013 topology is using edge2010 server.
    Seems like we have two options for replacing Edge servers,one is Rip and replace and the other one is side by side transition.
    We would like to do rip and replace so we can keep old simple urls (so that we dont have to send notice to external partners about Our New Access edge info) and using 2013 edge servers for federation and keep users on 2010 servers,then move them in
    a controlled way.
    What is the best way to do this?
    Thanks!
    Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Off2work

    Hi,
    From your description above, the purpose is no need to update the New Access Edge info to the external partners. So for those external partners who set federation type of “Allowed Partner Server”, you need to keep the SIP domain name and the Edge Server
    FQDN the same as before.
    So base on my knowledge, you need to plan a down time, and firstly cancel the federation route for the Lync Edge 2010 Server. Delete the Lync Edge 2010 Server and publish the topology. Then deploy the Lync 2013 Edge Server with the same FQDN with Lync Edge
    2010 Server. Then enable federation for it and point to the Lync Server 2013 FE Pool.
    Best Regards,
    Eason Huang
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Eason Huang
    TechNet Community Support

Maybe you are looking for

  • I recently updated my iphone 5 since then I don't have itunes on my phone how do I get it back on?

    I recently updated my iphone 5 to iOS 7.0.2 and ever since then I don't have iTunes Store app on my phone anymore can u please help me get it back?

  • HT1386 Sync problem from Macbook Pro to iPad 4

    I managed to download the music I purchased from iTunes to my Macbook Pro. I also managed to sync the music with my iPhone 5 so that I have all purchased music on the iPhone. However, I fail to sync the same music from the Macbook to my iPad 4. Any c

  • Problems in the install on 8i Personal Edition

    Is there a problem running Oracle 8i personal edition on a PC that has a Pentium 133mz chip with 32 megs of ram while running Windows 98 SE. The problem we are having is - when clicking on the setup.exe nothing happens. Thanks in advance for any help

  • Safari on iPad3 changes to full screen

    WIth the latest iOs8 update Safari changes to (almost) full screen on my iPad3 when I scroll down the page. How and where can I turn this off?

  • Changing "Raw" to "JPG"

    I am a brand new mac user and iphoto. The scenario is that: I imported "RAW" photo into iphoto and say I already finish editing all the "raws" and want to change all of them to "jpg" so it wont waste my hdd spaces. So in other words, change "raw" to