Two sites one problem

Hi all,
I have two sites I have published using a domain name I purchased. Site is hosted by mobileme. My first site is my companies website. The second site I created is for a client both get published to mobileme. The problem I am having now is that when you type my companies name www.trainbetterllc.com instead of being directed to the business site you get sent to the site I set up for my client which is password protected. I can no longer tell people to go to www.trainbetterllc.com because they will be taken to this password protected site. Instead I now must direct people to www.trainbetterllc.com/trainbetter_llc/train_betterllc/html. Is there a solution to this so I don't have to give the long drawn out address?

Thank you it appears your solution has worked. One thing I forgot to mention in my earlier post is that I use an app called iwebsites to switch between editing the two websites; initially I was concerned that this might be responsible, but after going back into iweb and going to my main business website and clicking publish all it appears that just typing in www.trainbetterllc.com directs me to the correct website. Thanks again for sharing you knowledge.

Similar Messages

Two ipods one problem

I have two ipods, one first and one second generation. The first generation model has been reset but now itunes won't see it but windows will. My second gen ipod works just fine. I have tried all the steps I could to get itunes to recognize the first gen. Any ideas. Thanks,

First of all, try another port on your computer. Some ports are not connected direct to the motherboard and do not recognize the iPod as well as those that are. Reset the iPod each time you connect it to another port.
Then try with the iPod in forced disk mode.
Putting iPod into disk mode.
Still no joy, see these.
iTunes 7 doesn't recognize the iPod.
iPod appears in Windows Explorer but does not appear in iTunes.
iPod does not appear in iTunes.
Fast user switching in Windows XP is not supported.
Windows confuses iPod with network drive

Two users, one problem

I bought a Powermac G5 used (barely used for a year) and when I brought it home, I thought I was changing the account name, etc., to my own, but instead I ended up adding myself as a second admin account. I didn't think anything was really wrong until I realized that I could use every single program on the computer under my own account EXCEPT for Final Cut Pro. It shows up as an application under my account, but when I try to use it, it loads up all the way to the end, but then instead of opening, it quits. When I switch over to the other account, it opens no problem. So I thought I could fix the problem by deleting the other account (I saved the file in the Deleted Users File just in case), but that didn't work. Everything works fine on the computer except I still can't open FCP. I don't have the original OS X Tiger disks so I can't reload that way. If I buy used Tiger disks or Leopard, could that fix the problem? Can anybody help me with this? Thanks in advance!

ig88rox wrote:
This sounds kinda scary.
It's only diagnostic. It looks scary because I put it all on the command line so it could be cut-and-pasted. Basically what I would WANT to do is just change ownership of FCP to your new user (using the Terminal chown command), and make sure said user can access all the files in FCP (using chmod). But that is pointless if your current user can already access all the files, and will likely break things further if some of the files deliberately have special ownerships (such as root) and/or the setuid or setgid bits set. So the scary line checks if any of that is the case. If you would prefer it as a script, I can probably convert it and give you a download link. (BTW, the "one-line" just means "don't put any carriage returns in the middle" not "make the Terminal window really really wide" )
do you know if it's possible to reinstate a deleted users file?
I would like to say yes, but it is better that you search the discussions. What worries me is that if it is a permissions problem, then you need to restore the deleted user with the original uid. I'm not sure that Mac OS would do that automagically. Otherwise, I would claim that you could just create a new user with the same name (and especially the same short name) as the deleted one, and then while logged in as the new user that you want to be the deleted user, REPLACE the new user's home directory (/Users/name) with the folder you put in Deleted Users. Easy for me to say, having never tried it.
Finally, only after making my last (scary) post did it occurred to me that if FCP is crashing, then it might be making an entry in the Crash Logs. So it might be worthwhile to open up the Console (I think it is in /Applications/Utilities) and look for an appropriate entry in the list on the left-hand side (if I were at my Mac right now I would be more specific so if this is confusing, just ask.) If you see an entry for FCP in the crash logs, post it. Debugging using the crash log is surely a much better bet than trying to diagnose the problem via file permissions. Unfortunately, I can't promise I will be able to parse the crash log, but hopefully someone will...

Two Remotes = One Problem

I have one remote that came with my MBP and one that came with my iMac. The problem is that they're both on the same channel/frequency, so when I hit a button both machines react. Is there any way to re-pair these remotes so that they control only their specified machine?
Tony

If you look in the Manual it will tell you how to pair your remotes with their own machine.... Don't hold me to this but I think you do it by holding it close to the IR reciever and pressing the play/or menu button for 5 seconds.

Two monitors, one iMac, mirroring problem

Here is the background: I want to stay healthy. All this sitting is killing me (and us).
So I attached a 23 inch Apple Cinema HD Display to my 16 GB memory (max) 27 inch iMac Intel Core i5 using a little adaptor. I have one screen up on a tall desk (so I can stand) and one on a lower desk (so I can sit) - this makes no difference to the problem here but, I want to give you a reason why I am asking a question. I use a wired Apple keyboard with the iMac and wireless with the Cinema HD. It all works great. Except for one problem.
I need to mirror the two (not mirroring would not make sense or work as it is essentially just two monitors in different user spots plus 2-3 feet apart on different levels + the menus and windows only stay on one screen for non mirroring - a pain). I only need one screen at a time.
When I mirror, the Cinema HD looks fine but the iMac shrinks down in size. When I choose the 2560 x 1440 iMac size, the iMac just goes back to the smaller 1920 x 1200 and says “Usable resolution 1920 x 1200”.
What is going on and, is there a fix I can employ to regain the lost screen real estate on the iMac screen? The 1920 x 1200 does not look as good on the iMac and the dock icons shrink to be unusable too.

You have a few options which are detailed here:
http://support.apple.com/kb/ht1495

Using two sites - setting one up with separate domain?

If I have two sites created in iWeb can I set up only one of the sites under a purchased domain name or are both sites linked to the domain name? Not sure if that even makes sense...
I have set up a site for a home business (web.me.com/[username]) and want to create another unrelated site for another purpose. I want to be able to use another domain name (www.[sitename].com) for the second site I want to create using iWeb.
Please help... I'm new with all of this! : )

Welcome to the Apple Discussions.
Using Domain Names with Multiple Sites in One MobileMe Account
There can be only one site using CNAME forwarding in a MMe Account. It must be the site that's at the top of the list of sites in iWeb.
Click to view full size
The other sites must use URL forwarding where the domain name is pointed at http://web.me.com/YourMMe_Account_Name/SiteName. You will see your full MMe URL but the domain name will get you there.
If you use domain name masking all you will see in the URL window of every page is http://www.yourdomainname.com. The downside to this is that visitors can only bookmark the entry/first page of the site and can only enter the site at that page. This may or may not be a problem for your site.
However, what's in the URL field is not really that important because the short domain name will get visitors to your site. After that they can bookmark the page they are interested in and don't have to memorize its longer URL.
If you use separate domain files for each account then you cannot use CNAME forwarding because it will point to the last published site and that may not be one you want.
OT

We have two iPhones, one iMac, and one iTunes account. Can someone tell me an yeast way to manage each iPhone separately- that is -- when we connect each iPhone how do we keep our contacts separated? this is a real problem. Thanks

We have two iphones , one imac , and one itunes account. Hope someone can tell me an easy way to synch each iphone so that our contacts stay separate. I would like to share itunes music etc but not synch the same contacts to each phone...major problem... Thanks!

You have a few options which are detailed here:
http://support.apple.com/kb/ht1495

One Apple ID two phones big problem.

Hi guys,
Before 6 months I bought new Iphone 4s,but it was used one day from person who sell it to me, so it already has Apple id.
I deleted user and created my user which was synced with iCloud and worked without any problem.
Before 10 I bought Iphone 5, also created my Apple ID on it and sync with my PC/ iCloud.
Yesterday I want to sell my first Iphone 4 and I did reset ( Erase all content and setting), but it did not want to wake up, so i started it with DFU mode using I tunes, and I did restore and update.
Now I am facing to bit problem, on the begging steps it says something like "this apple id cannot be used to unlock this iphone".
If I go to iCloud I can see only one device and currently its new iPhone 5, but both devices called with same name, so I am not sure is this problem.
So I have two doubts:
- I am not sure does SIM card can make this problem(on initiation phase you have to put sim in Iphone), because main is much smaller now so I using my wife SIM to finis registration Iphone 4 (iPhone 5 using smaller than iPhone4)?
- another thing It says you have to "use original apple id..", like I sad on the beginning when i bought Iphone4 it already has apple id on it, which I was deleted and configure main (afterwards this device was visible on my iCloud). So do I need to put first creaded apple id, does iPhone remembering first created or last used. If yes I have big problem because I dont have contact of user who sell it to me.
I want to add one thing, Iphone is not stolen I have warranty documentations and all profs that is not stolen.
PLEASE HELP, in my country we have awful support !

Just left the Apple store with an official answer. You can have two phones one Apple ID, turn off auto updates so you don't automatically get apps on both phones. Then you need two different iCloud accounts.

I have one problem and I think it is a settings issue. When I google the web I get results. Now, when I visit some website and I return to my search results I don't have any markers (diffrent link colour for visited sites in IE).

Question
I have one problem and I think it is a settings issue. When I google the web I get results. Now, I visited some website and then I want to return to my search results and pick another search result. And there is a problem: I don't have any markers (diffrent link colour for visited sites in IE) that would help me to distinguish visited and not visited sites.

Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
I suggest that no response is made to this duplicate thread.

Two "Sites" folders -- Weird URL problem

I use domain names for most of my iWeb sites. Suddenly all sites have been assigned the same domain name when I publish -- www.insidetuscany.org. I've "disconnected" the domain on my Namesecure site, but it is still getting assigned. Because of this I can't even see the new sites I create or create a feed URL.
One possible source of trouble is my iDisk. Publishing has created two "Sites." One of the Sites folders contains pages published by Aperture. The iWeb sites use these pages. The other "Sites" folder include the iWeb sites that use the Aperture files. Here are the paths:
..../iDisk/Sites -- This is the Aperture path for the Aperture pages used in the iWeb sites.
..../iDisk/Web/Sites -- This is the iWeb path for the iWeb sites.
This is driving me nuts. I've tried republishing everything, but still no solution.
Thanks

I don't know what the original URL looks like.
The url for iweb 08 sites is always like this:
http://web.mac.com/username/sitename/pagename.html
I've tried
http://web.mac.com/scottgrabinger/iweb/sites/InsideTuscany
http://web.mac.com/scottgrabinger/iweb/sites/InsideTuscany/Inside%20Tuscany.html
.Mac urls never have "iweb/sites" in the middle. You can see that none of your other urls are structured that way. The thing to try would be
http://web.mac.com/scottgrabinger/InsideTuscany
which works fine for me.
I also get the "announcement" box that says "published to www.insidetuscany.org"
Just ignore the announcement box, it is not telling you anything that is relevant here.

Two Sites - 1 with .mac and one with another hosted provider

Hi All,
I have two sites in iWEB08, the second of which I want to publish to a folder. When I choose this option, it publishes both to a folder. Is there a way just to do the site I want?
Thanks
Rich

Hi,
as far as I know there is no way to publish just one of the two sites to a folder... You will have to publish both of them and then delete one of them and upload the other. I would like a feature to able to publish just one of the sites too (I have five sites and always have to publish them all if I changed one of them... it's a matter of time...)
So please use the link below and ask for this feature to be added to iWeb (if they get a lot of requests they might add it)
http://www.apple.com/feedback/iweb.html
Thanks, regards
-Cédric-

Two Iphones one Apple ID problem

I have two iphones one on the same Apple ID one that I just restored and updated with itunes. But now when I hook up my other phone to sync it to get some ring tones it keeps taking me to set up device as new or from back up how to get past this screen. My backups from the device I synced is backed up on my computer but my other Iphone is backed up to the cloud. Please help me

If I setit up as new it will wipe it clean if I am correct so Imnot sure what to do.

Join two sites together

Hi, i have two dynamic websites each connecting to two
separate databases via separate connections. I have tried merging
the two sites into one, but i get a problem because the database
connection for one of the sites dont work after i join them. Can
anyone please tell me the best way to join two dynamic sites
together, so that both their databases work.
thank you

the best way to do it is to create a DSN connection but you
have to make
sure that they are on the same server
if both the websites are on the same server that it can be
easily done using
DSN connection

More than one problem with messages app

I'm trying to get this Messages app to work properly on my iphone and macbook pro. I have a few problems that are just very annoying and I can't seem to figure out what I am doing wrong. I'm sure it is some stupid setting I am overlooking, but I have exhausted my brain for the day.
1st problem - I can send and recieve messages on my mac and iphone. That works fine, but there are no notifications on my mac when I send a message from my iphone. The message shows up in the app, but it doesn't give me a notification or a badge that there are new messages. I have it turned on in the settings, but it just won't work...
2nd problem - My phone is the only one that is working. My whife has been sending me imessages from the other room for the past hour testing out the app and I get the messages on my phone, but none are showing up on my mac. I thought they were supposed to go to both?
I really hope someone can help me here. I am very frustrated with the whole thing.

HI,
On the iPhone in Settings > Messages > Received At > Caller ID there should be two "IDs"
One is the iPhone's own number and the other should be the Apple ID.
If the Apple ID is ticked then iMessages sent from the Phone should sync to the Messages app.
However incoming iMessages to the iPhone via it's Number will not sync to the Messages app.
This is apparently coming with the iOS 6 release.
For the Messages App check System Preferences > Notification and the app name and check if it supposed to be using the Dock badge, make sound or display Notifications (Alerts or Banners)
10:11 PM Friday; August 10, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Two MacBooks, Two Users, One MobileMe Family account

My wife and I both have MacBooks (different ones). We have a MobileMe Family account. Each laptop uses are unique MobileMe names, address books, calendars, etc... (i.e. I have an account, she has a MobileMe account). We both also have our own iPhone linked to these accounts respectively.
We also have a 'joint' MobileMe account (email and calendar only). This same joint account is the iTunes account for both of us.
We are still on MobileMe. I see lots of people having problems.
One problem I anticipate we will have is: How will iCloud know how to sync our accounts between hers, mine, and ours? There apparently is only one setting: ON and OFF.
We want our individual MobileMe accounts syncing email and calendars from our MacBooks and iPhones -- but our Joint account (iTunes, email, calendar) syncing to us both.
Is this going to be a mess on iCloud?
Thanks for any tips on how to better prepare for the conversion.

Roger,
Thanks for the reply.
I think I understand what you are saying.
I am wondering why the iCloud would be device-dependent. For instance, we have in our home two MacBooks, two iPhones, one iPad, one AppleTV. So, somewhat preciently knowing we'd eventually have more Apple devices, our main account (esp for iTunes) is our joint account. Joint email, calendar, and iTunes/iBooks content. Works great.
So, if we had a family with children with their own accounts, would it then not be possible for each person to have their own accounts and iCloud syncing off of, say, one home computer?
I recall in Steve Jobs's presentation that they 'demoted' the computer to just a device served by iCloud (much like the iPhone, iPad, etc... So, if an iPad can have multiple MobileMe accounts, as a MacBook may, why couldn't iCloud sync them all?
Thanks for the instruction -- just trying to figure out how to get things set up when we go to iCloud (we haven't turned it on yet for this reason).
I see in the discussions forums loads of issues from people switching over.
Maybe the right way to do it is each MacBook retains their accounts. Same with the iPhones. But turn off the other, shared accounts. Turn on iCloud...let it see everything, get synced: Computer A with iPhone A with iCloud Account A (email and contacts only). And Computer B with iPhone B with iCloud Account B (email and contacts only). Then add in the shared iCloud Account (email/calendar/iTunes only).
Thoughts?
Chris

Two sites one problem

Similar Messages

Maybe you are looking for