Two Sites Published With iWeb...Viewers Get Error Message With Second Site

I have used iWeb to create two web sites. I believe I have done so properly, using File>New Site to begin creating the second site. After publishing, I can visit both sites from within iWeb.
Curiously, the message panel that displays after successful publishing indicates the same URL for both web sites. Obviously, that's wrong. That address will open the first site properly (after automatically adding additional characters to the URL during opening), but is incorrect for the second site. As an alternative, I have visited both sites from within iWeb, and copied the URL from the browser window as the "proper" address.
When I use the copied URL's in my own browser, I can navigate to each of the websites properly. However, when I give those URL's to someone else, they get an error message that the second site cannot be found using the URL for the second site that I obtained using the "copying" technique described. That's the case even though both URL's work properly from my computer and browser.
Any suggestions as to what might be wrong?
Desktop G4   Mac OS X (10.4.4)  

Fred:
Mount your iDisk and go to the iDisk/Web/Sites folder and delete your friend's site folder that's there. The example below shows many site folders in the Sites folder.
Click to view full size
OT

Similar Messages

  • Using USB to connect to itunes with iphone. Getting error OXE8000084 with pulsating tone. Have reset passowrd, authorized computer, & repaired itunes when reinstalled. Any suggestions on how to successfully connect?

    Using USB to connect to itunes with iphone.  Getting error OXE8000084 with pulsating tone. Have reset password, authorized computer, & repaired itunes when reinstalled it. Any suggestions on how to successfully connect to itunes and what this error message means?  Thanks

    0X is a Windows Error. Take the time to look over on the right under the "More Like This" and look for ones that have the green checkmark as being solved. You should find answers there.

  • Have not used Itunes in a while and I cant access Itunes Store with out downloaded new version but I keep getting error message with download. Can I just access the Istore without downloading new version?

    Have not used Itunes in a while and I cant access Itunes Store with out downloaded new version but I keep getting error message with download. Can I just access the Istore without downloading new version?

    downloaded new version but I keep getting error message with download.
    What does the error message say, andrea? (Precise text, please.)

  • I was today invited to upgrade my iTunes when I logged on.  Update failed. Every time I now try to open iTunes I get error messages.  Second message reads "iTunes was not installed correctly. Please re-install iTunes. Error 7. Windows error 126"

    I was today invited to upgrade my iTunes when I logged on.  Update failed. Every time I now try to open iTunes I get error messages.  Second message reads "iTunes was not installed correctly. Please re-install iTunes. Error 7. Windows error 126". I now can't sync my iPhoneand I am worried that if I re-install I will lose all my contacts,calendar, notes, etc.

    I too had this problems (Windows 8.1).  A few weeks ago after the previous update before this version of itunes, I'd had a problem with the itunes store crashing and at that time I followed instructions to copy QTMovieWin.dll to the itunes folder, which fixed the store crashing.
    Today I fixed the problem by:
    Delete QTMovieWin.dll from C:\Program Files (x86)\iTunes.
    Uninstall ALL Apple Software using Control Panel / Programs and Features.  I uninstalled:
    iTunes
    QuickTime
    Apple Mobile Device Support
    Apple Application Support
    Apple Software Update
    Bonjour
    Delete the folders:
    C:\Program Files (x86)\iTunes
    C:\Program Files (x86)\Common Files\Apple
    Restart the computer
    Reinstall QuickTime
    Reinstall iTunes
    Everything works GREAT now, including the iTunes store.  You will not lose your media files, I got everything back, all my settings, playlists, etc.

  • After having to reinstall my drive with applications I get a message with Premiere Pro CS5 that it can't find any "capable video play modules" and asks me to "update" my "video display modules". How do I do this? I am using a mid-2010 iMac 27" with 10.7.3

    After having to re-install my start-up drive recently I am getting a message with Adobe Premiere Pro CS5 that it can't find any "capable video play modules" and asks me to "update" my "video display modules". I am using a mid-2010 iMac 27" with OSX 10.7.3. How do I do this?

    Premiere is an Adobe application and is supported in their forums.
    Good luck.
    x

  • Getting error message with Itunes

    Telling me to remove Itunes and reload with 64 bit version. Using laptop with Windows 7, also have desktop using Windows Xp and dont get this message.

    Many thanks.
    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
    If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

  • Get Error message with Roport Generation toolkit

    Hi:
       I am new to labview and want to make a report that content of  the FFT spectrum data and FFT figure. a error message as *The report generation toolkit does not support the data you are using*.I used a for loop for calculate the FFT,does this cause the problem?I really do know how to settle it.Any suggestion is welcome!Thanks in advance!!

    You do not need to use the Unbundle function - you already have the data available, so you're just performing an operation to get data you already have. Just use wires:
    yujin wrote:
    .I really do not know how to add the waterfall  to report,it seems can be translate to waveform.Even it is translated the report will also just be 2D show but not waterfall show.I wonder how I can get the picture of the waterfall,if so I can get it into report.But I do not know how I can do this,can you teach me?  
    I don't have LV 2009 running right now, so I can't give you the details, but basically what you need to do is to the get the image of the graph and add it to the report. You can use the Image to File method to save the image to file and then use the Report functions to add the image to the report. I can verify this tomorrow.
    Attachments:
    rewire.png ‏9 KB

  • Firefox will not open at all, keep getting error message with last 2 saved web pages on it

    Yesterday, I closed Firefox. I had multiple tabs opened, so it asked me if I wanted to save them. I clicked YES and closed Firefox.
    I had Google Docs open at the time.
    Now, when I open up Firefox, everytime, it tries to load the 2 saved pages, then gives me an error message saying that Windows will try to find the solution to why it can't open.
    I cannot use Firefox at all now.
    How can I fix this?
    I have re-installed Firefox completely and it does not work, it remembers my settings.

    This can be a problem with the file [http://kb.mozillazine.org/sessionstore.js sessionstore.js] in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
    Delete the files sessionstore.js and sessionstore.bak and any existing files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js .
    See http://kb.mozillazine.org/Session_Restore

  • Can't install icloud panel on pc with windows 7 get error message

    every time I try to install on icloud panel on windows 7 pc, I get an error message during install saying install could not be completed.  It does not give me a reason or any codes.  HELP!!!!!

    I have no idea what that message means; try uninstalling using http://labs.adobe.com/downloads/acrobatcleaner.html then download and reinstall the latest Reader from http://get.adobe.com/reader/enterprise/

  • HT1386 my i touch will not synci with my computer getting error message

    My i touch will not synci with my computer, keep getting erro message can you help?

    Restore.  Everything except the password will be restored.  Connect via cable to the computer that you use for sync.  Be forewarned that it takes a long time.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • Getting error message with javah -jni

    Hi,
    I am trying to generate .h file using javah -jni command.
    I am executing the
    prompt>javah -jni C:\proj\HelloWorld
    But it's giving the error
    Error: Class HelloWorld could not be found.
    But the class file is there in that folder.
    Could you please tell me why i am getting this error?
    Regards,
    Srinivas.

    Try this:
    javah -jni -classpath C:\proj HelloWorld
    Usage: javah [options] <classes>
    where [options] include:
            -help                 Print this help message and exit
            -classpath <path>     Path from which to load classes
            -bootclasspath <path> Path from which to load bootstrap classes
            -d <dir>              Output directory
            -o <file>             Output file (only one of -d or -o may be used)
            -jni                  Generate JNI-style header file (default)
            -old                  Generate old JDK1.0-style header file
            -stubs                Generate a stubs file
            -version              Print version information
            -verbose              Enable verbose output
            -force                Always write output files
    <classes> are specified with their fully qualified names (for
    instance, java.lang.Object).

  • Can't login with gdm and get error message

    Hey, I had an arch install up and running last night. I was tinkering with gnome themes, and installed a bunch and eventually tried to mess with the login screen. I installed something, I think like gnome-settings-manager or something like that, and it basically never worked. I tried to change the login BG and some stuff, but couldn't do it, the program would freeze.
    About an hour later, I realized chrome wouldn't run, and I had to use the default browser. I restarted and then when I logged back in, I have a black login screen with an error that says "Install Problem: the configuration defaults for gnome power manager have not been installed correctly please contact your computer administrator."
    When I try to login, it starts like it's going to work, but then brings me back to the same screen.
    So basically I can't login at the moment, I tried pacman -Runs gnome gdm gnome-setting-manager gamin gksu
    and then pacman -S gnome gdm gksu gamin
    but that still gives me the same screen.
    Any ideas where to go from here?
    Edit: Decided to install KDE as a workaround, I'll see where that gets me, opening a new thread as my root partition is now full... and IDK how to fix that atm
    Last edited by B-80 (2011-01-10 23:31:10)

    Just my 2 cents, seeing that nobody is replying...
    You could try to create another user and see if it works well, just to understand if it's a problem in the user configuration files, or in the system configuration.
    If the new user works well you could try to import your config files from your /home/user/ folder one by one and see which one messes up everything.
    If the new user has the same problems, it's a more serious problem, maybe you could try to remove packages one by one (pacman -Rscn package), starting from the last one you installed (you can list packages by installation date using yaourt -Qe --date) until it works again (taking care of not removing essential packages).

  • Iphone 5 will not sync with itunes. Get error message must update itunes to 10.7 but itunes state it is up to date with 10.6.

    iphone 5 will not sync with itunes stating that I must update itunes to 10.7, itunes tells me it is up to date at 10.6. How can I get my new phone to sync with old computer?

    You need to install Mac OS X 10.6, which requires an Intel Mac and at least 1GB RAM.
    (73676)

  • Getting error message with 1230 autonomous access point

    When try to add a new WLAN, i get an error
    This 'VLAN ID' is already in use. Choose an unique VLAN ID
    I am using an old image 12.3(2)JA2
    can somebody guide me on the same
    Thanks in advance
    Nikhil

    Go ahead and post your config as it is, as well as the commands you're trying to enter. It sounds like the VLAN you're wanting to use is already in use by another SSID, or at least the AP thinks it is.
    Keep in mind that you can only have one SSID per VLAN.

  • Why do I get error message HDCP when I try to stream?

    when try to stream a rented movie from iTunes I get error message with HDCP?

    OK, I`m a PC user, not MAC (but I have an IPhone 5 and Ipod Touch). I am using a Hewlett Packard HP Z 800 Professional workstation with 32 GB of RAM. My graphic card is NVIDIA GTX 670, the "monitor"" is a brand new SONY Bravia Full HD Televison set, connected by HDMI cable, 1.4  HDMI standard. Because the Iphone is new, I happened to browse the Itunes Shop and purchased the first episodes of the NIKKITA series. Runs perfectly. Yesterday I therefore invested into a larger bibliotheque of movies and single episodes of series.  Not ONE single item is running on any of my 5 computers. (All run Windows 7 64 Bit and the newest Itunes version is installed).
    Because I always was a PC User, in principal pay for downloads but also in principle boycot DRM disabled items for the very same reason I experience now (DRM is blocking the legal use, not the illegally downloaded and  cracked  versions), I might have misunderstood the message circulating some time ago, APPLE aborting the "DRM abuse". Legally the situation is an "inverse ripping" situation. Not the mean illegal downloader of copyrighted material damages the poor starving author or movie industry, but the industry is damaging (or preventing) the use of perfectly legal purchased materials and sold non funtional material, which is against all laws in the world. I`ll  remember it when they againn complain of decreasing sales and the end of the world. For myself the solution is not to purchase ANY of those bogus video, music or software files until any disabling software codes or hardware features are removed. If APPLE wants to do me a favor they could indicate if video files are HDCP -impaired or not or contain any other uninvited "user" of my property. (Of course my equipment would be HDCP ready. However I am not.)

Maybe you are looking for

  • AA 1.5 Consolidate tracks in one location, how to do it?

    I have a bunch of tracks spread out in an unorganized fashion. I'm trying to find a way in AA 1.5 to consolidate or put them all in a new folder, organized. Thus far, save as doesn't work, and the only method I've found is exporting each track as a n

  • Report Result Issue

    Hello All, I have a reporting issue. I hav designed a query with KFs as: Net Sales Exchange Rate Net Sales (INR) = Net Sales * Exchange Rate [CKF] % Share The issue is with the KF % Share. The calculation for this KF will be (Net Sales (INR)/ Total o

  • Dynamic configuration in ABAP tables

    Hi, is there any ABAP table in XI containing the dynamic configuration's xml of a message (or an equivalent information in any format)? Thanks, Daniele

  • Upgraded to 10.4.6-Can't connect to server

    I just upgraded two of the ibooks in our small office network to 10.4.6. Now when I try to connect to our server they bring up the correct dialog box and show the correct ip address but the "connect" button won't click. Nothing happens. The same thin

  • Pushbutton Inside ALV Grid

    How can I add a pushbutton inside ALV toolbar?