Two SLDs with separate XI-systems behind - transport content

Hello,
we have two SLDs, one for dev. Xi and one for prod XI.
So per SLD only one XI is known.
On SLD dev we implemented all required R/3 systems and included the transport groups to the systems and the transport connection (dev. syst to prod. syst).
So here the prod R/3 has as connected XI the dev XI!
Now we want to move the content of the dev SLD to the prod SLD.
What will happen to the related XI system in the business systems.
Do we have only have to change them in the destination prod. SLD?
Best regards
Dirk

Hi Shankar,
thanks for the detailed work on my question.
Unfortunately it wasn´t me who had to organize the environment.
Customer made the installation and then was asking for external consultancy.
So the situation was fixed a little bid away from simple logic.
For a go live at end of the year we will use this construction.
Next year customer plans to implement a new central SLD (including portals issues).
Then we will do another move with our SLD content.
Until then customers Xi guys can train a little bit on moving SLD content
to ensure that both SLDs have the same systems implemented.
Only to complete that:
To use transport groups you need prod XI and dev XI both on one SLD else you cannot link the R/3 systems to dev and prod area because transport groups have to be linked to the XI systems on the SLD.
So, my question was a little bit useless!
We had no prod XI available on the dev SLD.
From this issue my question was coming up.
We will add the dev XI to the prod SLD too.
Then moving content won´t cause any problems, I think!
Regards
Dirk
Message was edited by:
        Dirk Meinhard

Similar Messages

  • Unable to create two SourceSystem with same Logical System

    Dear gurus,
    The customer has expressed the need to connect a data source with the same Logical System name of the actual DS.
    Infact, on the SCC4 the R3 Prod/qua/dev has the same LOGSYS.
    The aim is to link the PROD/R3 system to the QUA/BW system.
    During the creation of the DS on RSA1, an error message display that BW cannot create the Source because the Logical system is already in use.
    All we know that on BI can not be two identical technical name, but if i CANNOT change the LogicalSystem on the SCC4, there is a workaround?
    Can i map the new sourcesystem with another LOGSYS name?
    Or  the only solution is to change the logical?
    Thanks in advance
    C.C

    Hi Sven and thanks for the reply.
    unfortunately the customer chose to appoint the entire landscape with the same logical system name (policy), so that i cannot make this change on SCC4.
    So, i have to link only one SourceSystem (or quality or prod)...but at least, i will make a refresh copy of the quality system
    ps: i'm a Basis

  • Can you have two iphones with separate iclouds on the same itunes account, can you have two iphones with separate iclouds on the same itunes account

    I have one itunes account with mulitple libraries for each device (one iphone, 4 ipods).  The one iphone is connected via the cloud.  everytime a new song or app is added to the account it is placed in all of the libraries.  I want to add another iphone to the acccount when I tried it replaced the contacts with the contacts on the iphone already on the account.  How do I prevent that from happening and can I have two iphones on the same account and use the cloud on both
    thanks

    iTunes will remember the settings for each device after you set them up for the first time.
    How to use multiple iPods, iPads, or iPhones with one computer -> Method two

  • How can I have two devices with separate iTunes accounts on the same computer without sharing libraries?

    I have an iPhone 3s and my sister has an iPhone 3.  We use them only as iPods.  We each have our own iTunes account, but we have to share a computer.  How can we both syn our devices without sharing our music and app libraries?

    The most reliable way would be to set up individual user accounts in WIndows. Then each of your iTunes libraries will be completely separate.
    Regards.

  • Syncing two iPhone with separate Apple ID's to the same PC

    I have an iPhone and an iPad syncing to my computer, all three using my apple id. My wife is getting an iPhone and would like to use some of the apps which I have purchaced, as well as the music, movies and tv shows on our computer.
    My question is: Can my wife use the content of itunes on my computer on her phone, if her phone is using her apple id (keep in mind that she will not be syncing her phone with any other computer) or will i need to use my apple id on her phone to enable the sharing of apps?
    Thanks in advance.

    anything that you have in your itunes library on cpu can be transferred to her device even if those items were downloaded using your apple id.she can purchase apps using her apple id as well and those items will be added to itunes library on the computer.what i'm saying is that if use share each others applications and in the future some of those apps need updating you have to update with whatever apple id they were downloaded from.does that make sense?

  • Anyway to sync two Macs with separate libraries?

    Hi
    My laptop and desktop have MOST of the same 11,000 songs. But the desktop has the most accurate comments, BPM and genre categorization. The laptop though has extra songs that I brought in via cd. Is there a way to sync/duplicate the desktop's library on the Macbook Pro and yet not lose those extra songs?
    I deejay quite a lot but cannot afford to hope that music in the cloud is going to be fast enough in places where there is weak or no signal. Is there a way to sync these two libraries now that iTunes Ranger won't work in Mountain Lion?
    Thanks
    Enio

    If all you want to do is copy music from one source to another, the best method would probably be homesharing.  http://support.apple.com/kb/HT3819 .
    HTH (Also, I hope this wasn't too basic a suggestion for you).

  • Can I use one phone number on two iphones with two apple ids?

    My carrier allows multiple sim cards with the same phone number for usage on different devices. I would like to use a second sim card for my phone number on a second iphone, but with a different apple id.
    Is it possible to use one phone number on two iphones with separate apple ids? How does this affect facetime/imessage?
    I can only find answers to using the same apple id on multiple devices. This works fine, but is not what I want to do here.

    You may be able to change the suspicious account activity message alerts
    in your Gmail settings, and check that side of it, since I can use several
    means of accessing my Gmail and Google Accounts; and in the past had
    shared an account (not google) with another party half a world away when
    her email server went down for a month.
    The Mail software should not know the difference, unless the setup in there
    is not correct; if this is so, then more than what she says would be wrong.
    The Google mail Support help site pages should cover this adequately.
    Gmail Help - Google Help
    https://support.google.com/mail/?hl=en

  • Two separate speaker systems on one card (audigy 2

    Is it at all possible to have two separate speaker systems (maybe even with different volume levels on windows) on the same card? I thought the card did that but it is not working for me.

    basketcase590,
    You can connect a separate set of analog stereo speakers to rear Lineout and Lineout2. Then in the EAX console, set CMSS3D to stereo surround. This will duplicate stereo output on both rear lineouts. You can affect the front-rear volume by adjusting the stereo focus.

  • My SLD is configured in SOLMAN sys, How can I connect it with SAP PI system

    Dear Friends
           My Basis has configured SLD in Solman, Now I cant use SXMB_IFR tcode in my PI that suggest me some error. saying "error in connection cant read secure connection config" or something like that.  Plus SLDCHECK tcode is also not happy. it suggest that RFC connections are missing.
         It is clear that My SLD is not linked with PI system. something is missing in technical system part and its not even bridged. but since I am not a BASIS guy I dont know How can I configure it. Not even my BASIS guy understands that I need to bring SOLMAN SLD to PI.
    Can anyone suggests me How can I bring my SOLMAN SLD to PI system so I can run SXMB_IFR tcode ? I need to create some rfc connection like LCRSAPRFC and SAPSLDAPI but dont know the connection type like t, or something else. Please englight me by suggesting How can I bring my SOLMAN SLD to PI.
    One intresting observation is when I try to run my SLD over url using PI system as host it comes but says SLD is not configured properly and when I did the same practice with SOLMAN host it works fine and I didnt receive any error.
    Please reply me. your any help will be appreciated greatly.
    Regards
    Naeem

    Hi,
    Preferebly PI should have it's own SLD. And SOLMAN could use PI's SLD.
    Please check Installation guide and SLD Administration Guide from Service Market place before finalizing SLD architecture in your System landscape.
    I guess SOLMAN will have only one Instance in system landscape. (Not three system landscape like Dev, Qa, Prod).
    If you want to go ahead with your current SLD plan, then Change your SLD hostname in Exchange Profile of PI, to SOLMAN Host name.
    Regards
    Praveen K
    Edited by: Praveen Kurni on Jul 7, 2011 6:12 PM

  • I have two libraries on separate computers. If i turned itunes match on in both computers would the two libraries merge? So if my iphone normally syncs with my laptop would i still only get the iphones library or would i get both as one?

    I have two libraries on separate computers. If i turned itunes match on in both computers would the two libraries merge? So if my iphone normally syncs with my laptop would i still only get the iphones library or would i get both as one?

    Yes, the two libraries should merge. However, you need to turn on match on one computer and let it finish before adding the second library.
    Once you turn march on n your phone then you don't sync it with iTunes, but the merged library will show up on the phone. If you don't turn on match on your phone and continue to sync then all of the music from both libraries should be available to sync to it.
    The only bit I can't confirm is what happens if you try to sync music to the phone which isnt actually downloaded into iTunes. Im not in a position to test that, but maybe someone else can help.

  • Two iMacs each with separate Apple ID.  Can I merge onto one Mac?

    Two iMacs each with separate Apple ID.  Can I merge onto one Mac?

    Yes, you can use the same computer for BACK UPS, RESTORING AND UPDATING. But that is it.
    You cannot, however, use it to sync the different devices. iTunes will only recognize one device to sync with and if you sync any other devices with that iTunes library, it will replace what is on the phone with whatever is in the library. It cannot differentiate between devices. At most, it will jsut recognize that the phone has been synced with a different iTunes library.
    So if you would like to use the same computer for backing up, restoring and updating, just make sure to turn of Automatic Syncing in your iTunes Preferences.

  • How to listen to iTunes through two separate stereo systems simultaneouly?

    I was thinking of buying two Airport Express units in order to run iTunes to two seperate stereo systems in two different rooms. Can this be done, or is there a better way to accomplish this?
    thanks for any help!
    pjo
    iMac G4, 800 Mhz   Mac OS X (10.3.9)  

    Hi Pjo,
    Yes, you can listen to iTunes through two separate stereo systems simultaneously. The current version of iTunes allows you to stream your music to multiple Airport Express units. At the bottom of iTunes, where the different Airport Express units' names are listed, there is a "Multiple Speakers..." option; select this to choose from one or more of your units.
    Hope this helps.
    - Keith

  • SLD Business System with or with out Logical System If so, which Log system

    Hi
    I'm in confuse with the Logical System when creating a Business System in SLD.
    Our requirement is LEGACY -- PI/XI -- ECC.
    When I create Business sytem in SLD, I need to give a Logical System. Which system (Is it xi/pi or ECC ) Logical System to be provided?
    Thanks.

    >
    Pothana Yadav wrote:
    > Hi
    >
    > I'm in confuse with the Logical System when creating a Business System in SLD.
    > Our requirement is LEGACY -- PI/XI -- ECC.
    >
    > When I create Business sytem in SLD, I need to give a Logical System. Which system (Is it xi/pi or ECC ) Logical System to be provided?
    >
    > Thanks.
    if you are using File to IDoc scenario then need to define logical systems for both business systems you are going to create for
    i.e they will be used as sender and receiver partners in case of logical systems
    if need more details check the below blog
    /people/rajeshkumar.pasupula/blog/2009/03/16/unable-to-convert-the-sender-service-to-an-ale-logical-system
    check the same for how logical system are used in this case...
    note above will be helpful in case of only idoc scenario..else no need of creating logical systems even though target sysstem is ECC
    HTH
    Rajesh

  • PO No range when we ink two SRM system with One ECC system

    Hello Experts,
    We have a client requirement to link Two SRM Systems with One ECC system.
    In this case what number range we need to maintain in both SRM systems for PO.
    -The number range of ECC PO should get update whenver the PO is transferred from any of the two SRM system.
    -We have Extended classic scenario.
    -Also PO Doc type is going to be same.
    Can we handle this by increasing the buffer of the number range in one of the SRM system?
    Any idea...pls help urgently.
    Best Regards,
    Anil
    Edited by: anil.s.verma on Oct 1, 2010 4:33 PM

    Hello Anil,
    Being in Extended Classic Scenario (leading PO being in SRM, R/3 PO number range is concidered as external because PO number is given by SRM), the only solution for you is to:
    1- give same number range interval for PO (internal in SRM system 1 and SRM system 2, external number range in R/3), e.g. 3100000000 - 3199999999
    2- in SRM system 2, fill in current number with (for example) 3159999999 and let empty (or current value) in SRM system 1
    3- assign, in each system for your concerned transaction type, number range as internal in SRM and external in R/3.
    In this way, you will avoid overlaping in R/3 between PO numbers coming from SRM system 1 and SRM system 2
    Regards.
    Laurent.

  • With out source system creation we have transported all the flow

    Hi all,
    With out source system creation in Quality we have transported all the data flow
    now is there any option to map the source system to transported flow.
    Regards
    Kiran Kumar

    Hi,
    you can reimport the same TR again once the mapping is done in BW from source system.
    If you have left the TR's in the import queue of BW for later import then you can reimport it again.
    This will go correctly.
    In qualtiy to do the mappings you will need development authorization.
    Thanks
    Ajeet

Maybe you are looking for