Two slow motion parts in one video?

Hi!
How do I have 2 slow motion parts in one video? I have the iPhone 5s and it only lets me slow mo once. Is there any app that does this? Thanks!

I don't use iMovie (I am a FCP X guy :-)) and in fact only have iMovie '09 in mac, but upon opening it was not hard to find (see the picture below). Basically, select the clip, press the letter "i" to open the inspector and drag the slider to make run slower (or faster).
I imagine it would be the same in a more recent version.

Similar Messages

Can you cut multiple video parts from one video?

Hi.
So like, I have 40 minutes long video. I want to cut this video in 20 parts. Do I have to cut every part separately and save project and than export .avi and do this 20 times for 20 parts, or am I able to mark 20 small video parts from one video in 1 project?
You know, I want twenty 2 minute long videos from 40 minutes video, but I want to find a way how to do it in 1 project, so I can put that project over Media Encoder and go to coffee meanwhile encoder is working.
Thanks,
Jackie Chan

Hello sir. Thank you for fast response. I will check Encore on youtube if you think it is the way this should be done.
Hm, I found some topics which say you can't even cut in Encore, that you need Premiere.
Hm, can you provide some tutorial for Encore to show me how to do this sir?
Thank you

Connect two 7344 motion controllers in one PC

Can I use two NI - PCI 7344 motion controllers in one PC. My application requires 6 axis and hence I want to use two PCI 7344 motion controllers. I am already using one. Can I configure another one in the same PC to add more axes to my current system. If yes, then how to configure the other one, so that it acts as the 5th and 6th axes in my system. I'm using LabVIEW 7.1 in my application.
Regards,
Giridhar Rajan
Automation Engineer
Cruiser Controls
Mumbai, India

You can add as many PCI-7344 boards to your PC as you want. The only
limitation is the number of PCI-slots available. In your software you
need to control the axes from the second PCI-7344 seperately from the
axes of the first one. That means that there are no built in methods to
start the axes on two or more boards synchronously. If this is not a
feature that you need then everything is quite straight forward. If you
need tight synchronization you might write an onboard program that's
running on the second board and that waits e. g. for a breakpoint
signal to be generated by the first board immediately after the axes
are started.
Assumed that you need tight motion synchronization with the additional
axes a better choice would be to use one PCI-7356 (6 axes) or a
PCI-7358 (8 axes) instead of two PCI-7344. The 735x boards are pin- and
software-compatible to the 734x boards. You could return your 7344 to
NI and buy a 735x board with a fair discount ("hardware upgrade"). If
this is an option for you please contact your local NI branch.
Best regards,
Jochen Klier
National Instruments Germany

How do I overlay part of one video onto another one?

Maybe a simple question, but I can't find the answer after a couple hours of searching:
I have a time lapse video of a sunrise and a real time video of a plane landing. I'd like to put the "real speed" airplane into the time lapse background (the shots are identical location) using Final Cut Pro X.
I thought an effects mask was the key, but it seems like i'm unable to track the movement of the plane by using keyframes. Is this something I have to do in Motion?
Any help is much appreciated.
Thanks.

Just in case anyone reading this is not too sure about keyframing, take a look at this excellent video tutorial that shows just how simple it is.
Also check out his other tutorials.
I have only one gripe about them. He writes down the instructions onscreen instead of speaking them and I find it impossible to read and watch mouse-movements simultaneously, so I have to keep pausing the video.
http://www.youtube.com/user/aMacPenguin#p/u/0/W-o5Xr-_nVo
If you have got Firefox with the DownloadHelper plugin you can download them in anything up to 1080p.
Message was edited by: Ian R. Brown

Two fast motion effects on one clip

Ive been trying to make a claymation movie right. So I put fast motion onto it, but it wasnt fast enough so I tryed to make it faster. I clicked on the clip with the fast motion on it and made it faster. I can preview what it would look like faster, but I can't apply it. What should I do?

You can make it faster only once.
A workaround is to apply the fast effect, then undo it and do a save: the rendered clip is moved to the Finder trash. Import it back to the project, THEN you can re-apply the fast effect to it again.
This trick doesn't properly work with interlaced input slo-mo because the clip is deinterlaced only when the project is sent to tape/iDVD (you can do a fake export to force this, though). Not doing a deinterlace will produce flicker on a TV.
Or, make the fast-motion effect with JES Deinterlacer:
http://www.sjoki.uta.fi/~shmhav/SVCDon_aMacintosh.html#speed

Slight slow-motion for music video with Canon 6D

Hello.
I'm wondering how I should capture and edit my video to get slight slow-motion in a music video I'm creating. Obviously I would need a proportionally sped up track, like 120%. That I can do.
The question is, what frame rates should I be using? Shouldn't it matematically fit? Like capturing in 29.97 FPS with ~120% track and editing in 25 FPS. How can I do this so the result is perfectly smooth?

Warning: You're going to get lots of contradictory answers because I (we) love to offer advice on projects where my (our) money and time are not at risk. That's part of the elitist attitude around here.
Is it best to shoot green/blue screen, or shoot high contrast footage, make into B & W and use the luma key? <</div>
I'd plan on shooting on a chromakey stage. If you shoot on white cyc, you are stuck with the white. If you shoot on a properly lit key stage, you can do anything. This depends on your ability to shoot on a suitable format and use a crew that knows how to light a key stage. You need a really good camera and good tape format. DV is out of the question.
Use FCP or AE? If AE any other way than the Animation codec for preserving transparency?< </div>
Why do you want to use something other than Animation? You can use a proprietary codec system that supports alpha but you did not mention access to specific cards.
Can AE's keylight be used with B & W footage? <</div>
Dunno, try the AE forum at adobe.com.
Is there a kaleidoscope filter for FCP? I know motion has a good one.< </div>
You're not going to be doing your effects in FCP.
bogiesan

Does the duration of the video change after putting a slow motion effect?

Hi, I'm new with this After Effect software, and through researches and youtube videos, i learned how to make a slow motion clip, but i found a problem just after i was so happy to learn something new. Because I was so excited to try it out, i took a quick 3secs clip and edited it, after all the successful application of the slow motions, the clip suddenly stop without finishing the whole video, the duration of the clip remains 3 seconds after i applied the slow motion, i was hoping that the duration would go over 3 seconds because the slow motioned part was only at 5% the original speed.
So my question is, is the duration really supposed to stay the same after the slow motion is applied or should it expand finishing the whole video.? Then what should I do if the duration doesn't expand?
Pls give me a respond, thx.:))

Nah, that's just not how it works. AE will only extend layers if you use the native time-stretch/ time-remapping. If you use the Timewarp, you will have to pre-compose the source clip to a comp with longer duration and then apply the slow motion.
Mylenium

IPhone 6 Plus IOS v8.1 Slow Motion BROKEN

Film in either of the two slow motion speeds and plays back ok on phone. I put the files in the computer (grab the raw file via explorer), on Win 7 Professional, and played with both windows media player AND Quicktime player (up to date players) and the videos play either no slow motion, plays alternating between fast and slow, one time it played slow but had normal voice pitch, other times played slow with low voice pitch. On youtube, they don't play in slow motion. One I shot vertically (which I did just as a test) and it was sideways in the computer, however, youtube rotated it so it's vertical but it is not in HD and it does not play back in slow motion. This same file that was sideways in my computer stopped playing after about 2 seconds in the computer, but played through ok in the phone. I noticed that as the video plays in the phone, there are blue vertical lines below the left/right scrub/scroll bar for the video. This can be set to play only a portion in slow motion. But WHY does it start each video with the ends nudged in so the first 3 sec is regular speed and the last 2 are also reg speed also w/the slo-mo in between? It defaults to this each time an you have to spread it out to get all slow motion..
In Win XP, some of the video files don't show up. It shows .aae files with corresponding numbers to the videos, but most of the videos are not there.
I think this is a huge software bug that needs to be tested. I updated the os on my new phone before I put anything into my phone. Everything else has been perfect till this. HELP!

You said, "...plays back ok on phone." That's where Apple's software stops. Your problems with Win 7, Win XP, Quicktime, and YouTube need to be addressed on forums for those programs and/or sites. Presumably the issue has already been resolved by users on those sites, with different solutions for each.

Slow motion Huge Bugs IOS 8.1 Iphone 6 Plus

When you shoot in either of the two slow motion speeds and plays back ok on phone. I put the files in the computer (grab the raw file via explorer), on Win 7 Professional, and played with both windows media player AND Quicktime player (up to date players) and the videos play either no slow motion, plays alternating between fast and slow, one time it played slow but had normal voice pitch, other times played slow with low voice pitch. On youtube, they don't play in slow motion. One I shot vertically (which I did just as a test) and it was sideways in the computer, however, youtube rotated it so it's vertical but it is not in HD and it does not play back in slow motion. This same file that was sideways in my computer stopped playing after about 2 seconds in the computer, but played through ok in the phone. I noticed that as the video plays in the phone, there are blue vertical lines below the left/right scrub/scroll bar for the video. This can be set to play only a portion in slow motion. But WHY does it start each video with the ends nudged in so the first 3 sec is regular speed and the last 2 are also reg speed also w/the slo-mo in between? It defaults to this each time an you have to spread it out to get all slow motion..
In Win XP, some of the video files don't show up. It shows .aae files with corresponding numbers to the videos, but most of the videos are not there.
I think this is a huge software bug that needs to be tested. I updated the os on my new phone before I put anything into my phone. Everything else has been perfect till this. HELP!

HI Brian,
have tried the hard reset, sign in and sign out still to no avail, and it won't let me update the iOS, unable to update when I try to it won't even let me see the available update
also I don't have access to a computer as I am a interstate truck driver in australia

Jerky Slow Motion with FCE

Hi,
I have final cut express 4, and I'm making a movie, part of it is pictures, and the other part video. I decided to make the pictures HD because they look better, but my video is SD. However, when I make a master sequence of my pictures and video sequences, slow motion in my SD video looks interlaced and jerky. I got rid of the interlace with the De-interlace filter, but I can't get rid of the jerky slow motion. PLEASE HELP!!!!

Actually, what I did was I put the HD pictures into a non-HD master timeline, which is basically what iDVD would do anyway, and the pictures looked better than if I made them in SD, and that way, my slow motion looked fine.

Create Slow Motion WIth A Timer?

I had asked in another forum if it was possible to have 2
different FPS's in a movie. And the answer was no. What i wanted to
do was have some slow motion parts in my movie. The same person who
answered said that it is possible with a timer. I have never used a
timer. And all the research i do on it comes up with Countdown
timers, and clocks, everything but what i would assume i need. Can
anyone help or clarify this for me?
I am making a sprite movie ( i know learn how to draw). I
think there fun. And mine are a bit more creative than most as far
as story and things in it. But there are some parts of the action
that i would like to slow down.
Let me know if you need anymore info.
Thanks.

I think WOWZA (
http://www.wowzamedia.com/)
has examples of it running
from their server. Not sure if the demo is online, but it
comes with the
server install. Developer versions are free. Maybe it'll give
you an
idea how.
Manno
eLearningDeveloper wrote:
> seeking clarification - it appears there is no such
thing as slow motion with
> FLV, though it can be sort-of emulated using a timer. Is
this correct?
>
> Looking at the AS3 specfication for netstream seek(),
and the discussion of
> so-called I-frames and P-frames, it would appear that,
with the correct
> settings on the server (EnhancedSeek), and video of a
certain quality (I-frames
> every 10 frames, with a high fps rate in the FLV) an
actual real slow motion
> could be attained.
>
> Are there any experts who know?
>

Slow motion in final cut pro..help!

hey guys,
I'm trying to do an ultra slow motion scene for a video, a pill dropping into a glass of water. i'm shooting it with a canon 7d at 60 FPS and for some reason i'm getting this awful warping...not smooth at all. i uploaded a video to show you what kind of result i was getting: http://vimeo.com/37878559
also, i'm using twixtor...maybe there is a better alternative to accomplish this shot through final cut pro without using a 3rd party plug-in such as twixtor? please help!

Cinema Tools. Need to CONFORM...
http://library.creativecow.net/ross_shane/slow-motion_cinema-tools/1

How come I keep getting errror message -50n when trying to create slow motion footage?

How comme I can not slow motion a section of video keep getting error message -50?

Tried that still coming up with error message: -50? set up a troble call to apple thanks...

HVX200 and slow motion

Hi,
Despite having read several how-to articles, I am still a little unclear on how to make best use of the HVX200's variable rate feature.
What I have done successfully is the slow motion feature that's described here:
http://www.studiodaily.com/studiomonthly/tutorials/trainup/5993.html
First of all, is that generally considered the correct setup?
If so, what's the best way to handle something that I might want at normal and slow motion? For example, a skating coming towards the ramp should be at a normal frame rate but on the jump, I want to use slow motion. Would I shoot all of it at the faster rate described above, use that directly in the 24p timeline for the slow motion part and convert the rest the clip to 24p? That is what I assume, based on reading this
section of article on the History Channel shoot:
O’Brien added, “The most useful feature of the camera was its ability to shoot 24 or 60 frames for any particular shot. Having 60 frames to use as a slow motion shot in a 24 frame timeline was the closest I've come to the days of 16mm, where you could dial up to 72 frames for slow motion. The 60-fps shots can be easily converted in Final Cut Pro to 24-fps if we decide not to use the shot as slow motion. Knowing this, we were unafraid and shot anything that we might want to be slow motion at 60 frames. This gave us a freedom we would not have had on film, where a slow motion shot would be expensive to convert back to normal.
Just writing this down is making me think more clearly that this is the best path but opinions would be much appreciated.
Regards,
fh

Hello and welcome to the forum.
You adjust speed in the Modify menu. Select Modify>Speed or press Command/J.

I have two videos and I would like to use parts of both videos with one audio track what is the best way to edit this?, I have two videos and I would like to use parts of both videos with one audio track what is the best way to edit this?

In Final Cut Express I have two videos I'd like to merge parts of each video into a final film. What is the best way to do this in FCE?

Hi
I use a slightly different way than Alchroma.
Same
• One video on track 1 and the other on Video.track 2
• Resize to 25% and move one to the left and the other to the right
Diff
• I don't use the blade tool
• I use the Pen tool and change the transparency - then I get fast or slow transitions in same stroke and easy to fine-tune later if needed. (But this can be done with the Roll-tool if Blade is used - so it might be as easy)
Final
• Resize to 100% and Center
Video is done
Audio - very close to this by changing the level so that best audio will dominate
• Pen tool here too
But that's me - the Alchroma way is as good as this or may be better for some
Yours Bengt W

Two slow motion parts in one video?

Similar Messages

Maybe you are looking for