Two small problems

During a recent test, I found two small problems: (Win2003/AS9.1/AM7.1(singlewar))
1) Entering a bogus username/password combo doesn't seem to get logged. I would have assumed it would show up in amConsole.error...
2) "User Status" doesn't work. (Unless it doesn't do what It sounds like it does). The test was to make a user, login as that user, logout, log back in as amadmin, set the new users status to inactive, logout and try the new account again. Logins still worked for the new user though. Is this not an option to lock a users account? Does it not work on the files data store or something?

Similar Messages

Lion runs like a charm, I only have two small "problems"...

Lion runs like a charm, I onl have two small "problems".
1. I really like the possibility to encrypt the time mashine backup, but I can encrypt every external disk, but not the Time Capsule (there the button is just gray).
2. When I start my MacPro the DVD tray opens and stays open, till I close it manualy.... any idea how to cahnge that?
Thanks for your help.

There's not a way at the current time.
https://discussions.apple.com/message/15706963#15706963
Captfred

MSI K8T-NEO: Two small problems

1) I can't get the HDD activity LED to work. I have the connector (2pin) plugged into pin 1 and 3 of JFP1. I have disabled both SATA controllers in the bios and have reversed the HDD connector on the board.
2) I have the PSU fan monitor connected to the PFAN1 connector. However I do not see the result in Core-center or anywhere else.
Thanks,
Jason
AMD 64 3200+
512 MB PC-2100 ram
Maxtor 40GB (IDE1-master)
WD 20GB (IDE1-slave)
LG CD-RW (IDE2 master)
Antec TruePower 430W PSU
SB Live 5.1
Powercolor Radeon 9600 Pro

Quote
Originally posted by Ycore
1) I can't get the HDD activity LED to work. I have the connector (2pin) plugged into pin 1 and 3 of JFP1. I have disabled both SATA controllers in the bios and have reversed the HDD connector on the board.
2) I have the PSU fan monitor connected to the PFAN1 connector. However I do not see the result in Core-center or anywhere else.
Thanks,
Jason
AMD 64 3200+
512 MB PC-2100 ram
Maxtor 40GB (IDE1-master)
WD 20GB (IDE1-slave)
LG CD-RW (IDE2 master)
Antec TruePower 430W PSU
SB Live 5.1
Powercolor Radeon 9600 Pro
Update: I was wrong about the PSU fan speed showing in BIOS. I just checked to be sure, but it's not there either.

Two quick problems

ok.. so i have two small problems...
1) it seems my file has gone into what we call "outline" mode
in illustrator.. and i can't figure out how to get it back.. any
ideas?
image here
2) i have made a few buttons that will control the keys..
unfortunately when i try to add actionscript it says that i can't..
how am i supposed to direct these buttons to do things? any
tutorials around? my google attempts havent yielded much..
also.. i am not exactly a new user.. its just been since
before flash mx that i have used the software..
thanks.
chad

Question 1: Try going to Store>Check for available downloads. If it doesn't download from there. It is most likely corrupt in your download queue. Send an email to the iTunes Store explaining what happened, and they would just add the item to your queue again.
Question 2: It runs off the Apple Software Update software, I would try reinstalling it.

Hi, I have small problem, for some time in music area I had two folders to use 1. Apple loops for soundtrack pro 2. Final Cut pro sound effects now both are gray and with out content may I know what happend

Hi, I have small problem, for some time in music area I had two folders to use 1. Apple loops for soundtrack pro 2. Final Cut pro sound effects now both are gray and with out content may I know what happend

I just went through this and it appears that my Focusrite Saffire was the culprit. I connected all the outputs on the focusrite according to the way the jacsk on the back were labeled and then set up the multichannel speaker setup to match. Then I went into STP, created a pink noise clip and panned it around, the LFE, center and rears were not in the right place.
I reconnected the hardware to match the 5.1 pan pot in STP then changed the multichannel speaker setup to match. Everything appears to be correct now but I would have loved to have been able to just assigned the output busses to correct outputs in the saffire.
Next step is to pan that pink noise around with my SPL meter to calibrate the room.

How do I backup a large music library to two smaller drives?

Does anyone know if it is possible to split a library in half, when backing up? I have an external 1000 gig lacie drive that is the home of my itunes media folder location. I also have two smaller lacie drives that put together could have enough space to cover the amount of music that is on the large lacie.
The total size of the library is now 397 gigs, and since I've been reimporting many favorite albums in the full aiff form, the library is growing. But since the library is too big now for any one backup drive I'm getting nervous. The smaller drives are 250 and 175 gig drives, and up until now have been the place where I would double backup to, when the library was much smaller,[ only aac files ].
So how do I send part of the library to one drive and the rest to another???

Thanks J.G. ... I checked out all these fixes, and none address my issue. I am not looking to change the location of the library to be able to play specific genres, or different kinds of files [movies] on different drives. I am happy that all my files are stored and played from one place.
I am only [ and, perhaps it is a too big only..] looking for a way to portion out the library [ one portion that would fill the smaller drive and the other portion that would correspond with the size of the other external drive] to utilize the drives that I already own, as a place of backup. I know that the easiest way to fix the problem would be to buy another large drive similar in size to the main one I am now using to store my music.
Even perhaps one that has double the size and, an automatic mirroring function, like the western digital two terrabite model.
But, failing that option, I am still looking for a cheaper work around!

I have an Intel based iMac that has just developed two small spots on the screen. One 1/8" circle at bottom and a tiny circle at top. The fading on and off light isn't working anymore either. Does anyone know anything about this?

I have an Intel based iMac that has just developed two small spots on the screen - they look light brighter spots on the screen. One 1/8" circle at bottom right and a tiny circle at top right. The fading on and off light on area surrounding the screen isn't working anymore either. Has anyone else had similar problems? Any solutions? Thanks!

One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

Two small issues switching from Leopard to Snow Leopard

Hi,
I just recently switched to Snow Leopard from Leopard. I was considering Lion, but heard some bad things about it.
Either way, I noticed two small issues. The first was a hot key set on my Logitech mouse. I had a button preset to all windows expose. In the software
for the mouse driver you can set it to expose specifically. (Its not just setting it to a certain F key). For some reason this doesn't work anymore.
The other problem is when I link my mac book pro to an external monitor thru an hdmi cable, I notice on the tv screen it reverts back to the default
desktop background. Instead of having the picture I set, it shows up on the big screen the blue and purple space image.
Any suggestions?
Thanks

Thanks for the reply,
The Logitech mouse driver said there were no updates available so I figured the expose had something to do
with the new OS system since it now said expose and spaces, which Leopard never had spaces.
So what I did was figured out how to just set it up with the F keystroke and it worked!
When I link my Mac Book Pro to my tv, I use an external keyboard which is more up to date with the quick f keys up top and the arrangement is set up differently [ such as the volume keys are now f 10 and 11 instead of f 3 and 4 or something like that] Hopefully when my mbp is linked to this the keystroke I have set for expose still works. I believe it will.
And as for the desktop bg, after unplugging my tv I notcied it still stayed on the space theme. So I believe I know what may be the issue. I set that bg off of a picture on an external hd, and never saved the image on my computer hd. So I'm assuming it saved the desktop picture in some cache thing or something and once it got linked to an external monitor it got refreshed.
I now how that image on my computer and set, so hopefully the next time I link my computer to the tv, it'll stay.
Thanks!

Recursive mergeSort... small problem with infinate recursion.

Basically, I have made a recursive mergeSort method, but there is a small problem...im getting stuck with an eternal recursion, which is obviously followed up swiftly by a stack flow error, problem is I cant see where im going wrong...
The error reads, "Exception in thread "main" java.lang.StackOverflowError at part3.mergeSort(part3.java:56)"
Heres the code... any help is highly appreciated, as I am new to java, and this is for university.
public class part3
    public static void main(String[] args)
      // Declare array of unsorted values.
      int[] values = {1,3,5,7,9,2,4,6,8,10};
      // Display unsorted values on screen.
      System.out.println("Unsorted Values");
      for(int i= 0;i < values.length; i++)
           System.out.println(values);
mergeSort(values, values.length);
output(values);
public static void mergeSort(int[] vals, int n)
// Declare necessary values
int lowCount, highCount;
int[] low, high;
int i, j, k;
if (n > 1)
          low = new int[n];
          high = new int[n];
          for(i=0,j=0,k=0; i < n; i++)
               if(vals[i] < low.length)
                    low[j] = vals[i];
                    j++;
               else
                    high[k] = vals[i];
                    k++;
          lowCount = j;
          highCount= k;
          mergeSort(low, lowCount);
          mergeSort(high, highCount);
          for(i = 0; i < lowCount; i++)
               vals[i] = low[i];
          for(i = 0; i < highCount; i++)
               vals[i+lowCount] = high[i];
public static void output(int[] data)
for(int i = 0; i < data.length; i++)
     System.out.print(data[i] + " ");
          System.out.println();

yes sorry, that was it, when i put that code in my class... i get an acception in thread main...
heres the code i now have...
I know i need to add a main method, but im completely unsure of what I need to put inside the main method, if you get what i mean...
sorry for all the hassle... :(
public class part3
     * Mergesort algorithm.
     * @param a an array of Comparable items.
    public static void mergeSort( Comparable [ ] a ) {
        Comparable [ ] tmpArray = new Comparable[ a.length ];
        mergeSort( a, tmpArray, 0, a.length - 1 );
     * Internal method that makes recursive calls.
     * @param a an array of Comparable items.
     * @param tmpArray an array to place the merged result.
     * @param left the left-most index of the subarray.
     * @param right the right-most index of the subarray.
    private static void mergeSort( Comparable [ ] a, Comparable [ ] tmpArray,
            int left, int right ) {
        if( left < right ) {
            int center = ( left + right ) / 2;
            mergeSort( a, tmpArray, left, center );
            mergeSort( a, tmpArray, center + 1, right );
            merge( a, tmpArray, left, center + 1, right );
     * Internal method that merges two sorted halves of a subarray.
     * @param a an array of Comparable items.
     * @param tmpArray an array to place the merged result.
     * @param leftPos the left-most index of the subarray.
     * @param rightPos the index of the start of the second half.
     * @param rightEnd the right-most index of the subarray.
    private static void merge( Comparable [ ] a, Comparable [ ] tmpArray,
            int leftPos, int rightPos, int rightEnd ) {
        int leftEnd = rightPos - 1;
        int tmpPos = leftPos;
        int numElements = rightEnd - leftPos + 1;
        // Main loop
        while( leftPos <= leftEnd && rightPos <= rightEnd )
            if( a[ leftPos ].compareTo( a[ rightPos ] ) <= 0 )
                tmpArray[ tmpPos++ ] = a[ leftPos++ ];
            else
                tmpArray[ tmpPos++ ] = a[ rightPos++ ];
        while( leftPos <= leftEnd )    // Copy rest of first half
            tmpArray[ tmpPos++ ] = a[ leftPos++ ];
        while( rightPos <= rightEnd ) // Copy rest of right half
            tmpArray[ tmpPos++ ] = a[ rightPos++ ];
        // Copy tmpArray back
        for( int i = 0; i < numElements; i++, rightEnd-- )
            a[ rightEnd ] = tmpArray[ rightEnd ];
}

Some small problems with my new 3G iPhone

Having some small problems with my new iPhone, nothing major, just annoying.
1. When I plug my iPhone in to charge/sync my Adobe photoshop keeps trying to download the photos on my iPhone, which causes an error message from Adobe that it can't download and it stops all syncing and removes my iPhone from iTunes. I have to unplug and reinsert USB cable and sometimes it works ok and sometimes I have to reinsert again. Also when charging, it will disconnect, reconnect and the samething all over again, photoshop trying to get photos and an error message.
2. Can't send e-mails via 3G? Only can get, have to connected to a WiFi to send e-mails, or is this normal?

When your iPhone includes photos in the Camera Roll, it is also detected as a digital camera when connected to your computer, and whichever app you have selected to import photos will automatically launch to import the photos. If you haven't imported these photos, it is a good idea to do so as with any other digital camera. I import the photos followed by deleting the photos from the iPhone after the import process is complete. If I want any of the imported photos available on my iPhone for viewing, I add the photos to an existing album that is selected to be transferred to my iPhone under the Photos tab for my iPhone sync preferences, or add the photos to a new album followed by selecting the album under the Photos tab followed by a sync.
If your iPhone's Camera Roll does not include any photos that have not been imported, Adobe Photoshop should not launch automatically when your iPhone is connected.
I know how to disable the selected application for photo import from launching automatically regardless with a Mac, but not with Windows.
Regarding the sending email problem, who is the email account provider and does the email account provider have an authenticated SMTP server?
Most ISPs block the use of SMTP servers that are outside of their network or not provided by the ISP being used for your internet connection unless the SMTP server is authenticated. When connected to the internet via AT&T's cellular network, it is no different in this regard. AT&T's SMTP server is included and available by default for use with an email account that does not have an authenticated SMTP server when connected to the internet via AT&T's cellular network, but you probably won't be able to use this SMTP server for sending messages with the account when connected to the internet with your ISP via an available wi-fi network - especially if the email account is provided by your ISP.
I access two email accounts with the iPhone's mail client and both accounts have an authenticated SMTP server. I've never had any problems sending with either account regardless the ISP being used for an available wi-fi network, or when connected via AT&T's cellular network.

I have two small charges on my credit card from the itunes store. I tried to call for answers as to what they were for. A recording told me to go to this website and i still can not find the items charged anywhere.

I have two small charges on my credit card from iTunes store and I would like to find out what they are. The number listed is a recording and tells me to come to the website for answers. There is no sign of any purcases in my itunes store. Where can I get a person to talk to from I tunes? Has any one had this happen to them?

Look at you purchase history.
Open itunes, click on your name in the top right corner and go to your account and look.
BTW, there is no telephone support for itunes at all.

Two new problems with the Quicktime Plug-in

I recently discovered two new problems with the current Quicktime Plug-in for Mac OS X.
First, the Quicktime Plug-in is unable to stream Quicktime media in any internet browsers other than Safari.
There is just nothing on the spot where the embedded Quicktime player should be.
Second, the Quicktime Plug-in only shows the message "The operation couldn't be completed. This file is not a movie file (-2048)"
everytime it should work together with the Flip4Mac Plug-in. The thing is, when facing a webpage where a wmv or wma file is
embedded, there only shows that error message on the spot where the player should exist. I first thought that it would be a
problem with Flip4Mac. So I uploaded about this problem on telestream.net, only to hear that the error message above belongs
to the Quicktime Plug-in.
Both of these problems did not happen at all only three weeks ago. The embedded Quicktime player showed up without any problem
in my Firefox and Opera, and wmv or wma files were streamed successfully through the Flip4Mac and Quicktime Plug-ins.
Then, suddenly, after some point, these two problems began to occur, and there is no information on how to solve them on the web.
I obviously tried uninstalling and reinstalling Quicktime. I even completely erased the hard disk of my Macbook, and reinstalled the
whole Mac OS X. But the problems still remained. I borrowed another Macbook from my friend to check whether these problems
occur in other computers, and they did occur in my friend's Macbook as well. So they are definitely not the matter of my own Macbook only.
I think these might be the problems with the new Quicktime Plug-in 7.7.1.
Please check about these problems and solve them on the next version of the Quicktime Plug-in.
I will give you a couple of hyperlinks so that you can check about the problems directly.
http://blog.naver.com/dbswhddlf1?Redirect=Log&logNo=130025903581
↑ This link is for the first problem (the embedded Quicktime player not showing up in any browsers other than Safari)
http://blog.daum.net/wellabc/15434322
↑ This link is for the second problem (the error message showing up on the spot where a wmv or wma file should be streamed)
p.s: I am sorry that I am Korean.

I recommend that you repeat all this via
http://www.apple.com/feedback/quicktime.html
to make sure that Apple will see it.

How do I divide a large catalogue into two smaller one on the same computer?

How can I divide a large catalogue into two smaller ones on the same computer? Can I just create a new catalogue and move files and folders from the old one to the new one? I am using PSE 12 in Windows 7.

A quick update....
I copied the folder in ~Library/Mail/V2/Mailboxes that contains all of my local mailboxes over to the same location in the new account. When I go into mail, the entire file structure is there, however it does not let me view (or search) any of the messages. The messages can be accessed through the Finder, though.
I tried to "Rebuild" the local mailboxes, but it didn't seem to do anything. Any advice would be appreciated.
JEG

Very small problem RE: Variable not initializing

//Hey, folks! Having a small problem here. Compiler keeps telling me that "result" variable may not have been initialized for this method. This is probably an issue of variable scope? It's staring me in the face and I can't see the problem. Can you see the problem?
public Shape randomShape()
          Random generator = new Random();
          intShapeDecider = generator.nextInt(3);
          int intCrdntX1 = generator.nextInt(500);
          int intCrdntY1 = generator.nextInt(500);
          int intCrdntX2 = generator.nextInt(500);
          int intCrdntY2 = generator.nextInt(500);
          int intWidth = Math.abs(intCrdntX1 - intCrdntX2);
          int intHeight = Math.abs(intCrdntY1 - intCrdntY2);
          Shape result;
          if (intShapeDecider == 0)
               result = new Line2D.Double(intCrdntX1,intCrdntY1,intCrdntX2,intCrdntY2);
          else if (intShapeDecider == 1)
               result = new Rectangle(intCrdntX1,intCrdntY1,intWidth,intHeight);
else if (intShapeDecider == 2)
          result = new Ellipse2D.Double(intCrdntX1,intCrdntY1,intWidth,intHeight);
          return result;
     }

Nope...don't think that's the problem. My random ints are only 3 possible nums ...0,1, or 2. I have an if for each possible condition. Therefore, nothing "else" can really happen. No?

Problem with installing free App (Everything is fine, bur we had a small problem getting your license)

Hello,
We have free App for SharePoint Online. Some our customers have problems with the installation. After install they see an issue with obtaining a license which should be free.
"Everything is fine, bur we had a small problem getting your license. Please go back to the SharePoint store to get this app again and you won't be charget for it."
See the screen:
How can we resolve the issue?
Thank you!
Our App: "Resource Reservation"
https://store.office.com/resource-reservation-WA104276770.aspx

Hi Gabe,
First, please check the suggestion above is helpful. I also suggest you removing all version of Office and re-install Office 2013.
We can try to run the application as an administrator and check if it works.
1. Right click the shortcut of the application or the main application.
2. Select properties.
3. Select compatibility tab and select "Run this program as an administrator."
If there is anything I can do for you about this issue, don't hesitate to tell me.
Best regards,
Greta Ge
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Two small problems

Similar Messages

Maybe you are looking for