Two sorted lists after adding a new contact

I got a new N73 (actually by Softbank Japan 705NK, language set to English), synchronized it to Outlook, so I had a couple of contacts in the contact list of my phone. They were all correctly sorted.
When I now added new contacts to the phone (not via Outlook, but directly inside the phone), I got a second sorted contact list before the existing one, i.e. all new contacts are not automatically inserted into the existing list of contacts, but a second list of contacts (which is sorted again) is generated. So now I have two sorted lists followed by each other, first the contacts inserted via the phone, second the contacts synchronized via Outlook/Nokia PC Suite.
Did anyone experience this problem? How can I get one sorted list instead of two lists?

My thinking about deleting from the phone after synch-ing the contacts to Outlook was indeed that if you don't remove them, the synch won't see any reason to update them on the phone.
Your point about sync deleting them is a good one, which is one reason I thought you might have to remove all contacts from the phone before synching back.
Either way, I'd take a backup before you try anything
Message Edited by patc on 18-Jan-2008 12:43 PM

Similar Messages

  • WINDOWS 8.1 - System Tools no longer displaying User and Group Settings after adding a new LOCAL user.

    I jumped on my parents computer, which is on a domain.  I added a new local user(with my live.com login) and gave it admin status.  That's when the trouble began.
    The main user profile disappeared.  I used the command prompt fix (see other fixes) to add the missing user back into admin.  I logged back in, and it set up the account for the first time (WTF?).  I cannot access any files from the main account
    (that I logged into just fine before to get this debacle started.)
    When going to Local Computer Management --> System Tools, my users and groups tool is missing.
    I ran lusrmgr.msc only to find out that the most current version of Windows 8.1 and this is what it said "This snapin may not be used with this edition of Windows 8.1.  To manage user accounts for this computer, use the User Accounts tool in the
    Control Panel."   <---- Awesome!  (that was sarcasm.)
    I have spent over two hours in the User Account tool during the course of this problem only to prove that a picture of a computer is more useful that that "tool".  
    To anyone reading this ticket, the best advice I can offer you (as long as its not a crucial machine) is to back up what you can gain access to, format your hard-drive and reinstall windows and start over again.  I wouldn't recommend reinstalling 8.1,
    I would say go back to 7 and wait until 10 comes out.   Windows 8 is the new Vista.  Good luck!

    Hello AhavahOlam,
    I can understand your feelings.
    If my understanding is right, after adding a new local user in domain-joined Windows 8.1, you can’t open the local users and groups.
    Can you still add account by going to Control Panel\User Accounts and Family Safety\User Accounts\Manage Accounts?
    As this computer is domain-based, it is recommended to contact the domain administrator to see if the option is blocked.
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

  • What is the expected behavior in a zone after adding a new static route in Solaris 10....

    Hi Folks,
    I have a few Solaris 10 production machines here at work and had a strange thing happen. I added a new route to these machines using the "add route <destination > <gateway>" command and my web applications running in the zones on these machines froze up. The applications that froze had no reason to do this as they have never talked to the machine in this new route. Here is the old route table via netstat -rn:
    Routing Table: IPv4
    Destination Gateway Flags Ref Use Interface
    172.23.248.0 172.23.248.24 U 1 6794 bge1
    204.154.126.0 172.23.248.100 UG 1 0
    204.154.127.0 172.23.248.100 UG 1 0
    204.154.134.0 172.23.248.100 UG 1 0
    204.154.135.0 172.23.248.100 UG 1 0
    204.154.132.0 172.23.248.100 UG 1 0
    204.154.133.0 172.23.248.100 UG 1 0
    204.154.130.0 172.23.248.100 UG 1 0
    204.154.131.0 172.23.248.100 UG 1 0
    204.154.128.0 172.23.248.100 UG 1 0
    204.154.129.0 204.154.129.74 U 1 7980 bge0
    204.68.180.0 172.23.248.100 UG 1 0
    204.68.181.0 172.23.248.100 UG 1 0
    192.168.0.0 172.23.248.100 UG 1 34
    172.28.0.0 172.23.248.100 UG 1 9
    172.29.0.0 172.23.248.100 UG 1 0
    172.30.0.0 172.23.248.100 UG 1 0
    172.31.0.0 172.23.248.100 UG 1 0
    172.24.0.0 172.23.248.100 UG 1 0
    172.25.0.0 172.23.248.100 UG 1 44
    172.26.0.0 172.23.248.100 UG 1 934
    172.27.0.0 172.23.248.100 UG 1 0
    172.20.0.0 172.23.248.100 UG 1 0
    172.21.0.0 172.23.248.100 UG 1 0
    172.22.0.0 172.23.248.100 UG 1 82
    172.23.0.0 172.23.248.100 UG 1 161975
    172.16.0.0 172.23.248.100 UG 1 0
    172.17.0.0 172.23.248.100 UG 1 0
    172.18.0.0 172.23.248.100 UG 1 0
    172.19.0.0 172.23.248.100 UG 1 82
    10.0.0.0 172.23.248.100 UG 1 1766
    224.0.0.0 204.154.129.74 U 1 0 bge0
    default 204.154.129.1 UG 1 8411
    127.0.0.1 127.0.0.1 UH 225713773 lo0
    Here is the route table after I added my one additional route (note the top line):
    Routing Table: IPv4
    Destination Gateway Flags Ref Use Interface
    204.154.129.209 172.23.248.100 UGH 1 5
    172.23.248.0 172.23.248.28 U 1 5757 bge1:3
    204.154.126.0 172.23.248.100 UG 1 0
    204.154.127.0 172.23.248.100 UG 1 0
    204.154.134.0 172.23.248.100 UG 1 0
    204.154.135.0 172.23.248.100 UG 1 0
    204.154.132.0 172.23.248.100 UG 1 0
    204.154.133.0 172.23.248.100 UG 1 0
    204.154.130.0 172.23.248.100 UG 1 0
    204.154.131.0 172.23.248.100 UG 1 0
    204.154.128.0 172.23.248.100 UG 1 0
    204.154.129.0 204.154.129.86 U 1 484 bge0:2
    204.68.180.0 172.23.248.100 UG 1 0
    204.68.181.0 172.23.248.100 UG 1 0
    192.168.0.0 172.23.248.100 UG 1 114
    172.28.0.0 172.23.248.100 UG 1 2
    172.29.0.0 172.23.248.100 UG 1 0
    172.30.0.0 172.23.248.100 UG 1 0
    172.31.0.0 172.23.248.100 UG 1 0
    172.24.0.0 172.23.248.100 UG 1 0
    172.25.0.0 172.23.248.100 UG 1 43
    172.26.0.0 172.23.248.100 UG 1 944
    172.27.0.0 172.23.248.100 UG 1 0
    172.20.0.0 172.23.248.100 UG 1 0
    172.21.0.0 172.23.248.100 UG 1 0
    172.22.0.0 172.23.248.100 UG 1 77
    172.23.0.0 172.23.248.100 UG 1 160823
    172.16.0.0 172.23.248.100 UG 1 0
    172.17.0.0 172.23.248.100 UG 1 0
    172.18.0.0 172.23.248.100 UG 1 0
    172.19.0.0 172.23.248.100 UG 1 0
    10.0.0.0 172.23.248.100 UG 1 183
    224.0.0.0 204.154.129.86 U 1 0 bge0:2
    default 204.154.129.1 UG 1 1850
    127.0.0.1 127.0.0.1 UH 58 225894 lo0:3
    My question is why did my application die and need to be restarted after this one simple route was added? What is the expected behavior in a zone after adding a new route to the root zone?
    Thanks,
    Tom Gellert
    tom.gellert&#64;tellabs.com

    Greg- Dreamweaver CS4/Live View integration with BrowserLab allows you to send interactive states of a local site/design directly to BrowserLab (dynamic data, rollover/mouse interaction states, widget states, et al), and from behind firewalls no less- definitely a scenario we covered.  You can get the extensions (which require Dreamweaver CS4, of course) up on the Labs site: http://labs.adobe.com/technologies/browserlab/

  • Logical standby issue after adding a new user at production db server

    Hello Experts,
    I am facing a issue related to logical standby db server where after adding a new user at production db server logical standby has stopped sql apply. Can anybody give some idea to find out the root cause and give some tips to resolve the issue.
    tried below .....
    SELECT EVENT_TIME, STATUS, EVENT FROM DBA_LOGSTDBY_EVENTS
    ORDER BY EVENT_TIMESTAMP, COMMIT_SCN, CURRENT_SCN;
    got error
    ORA-16227: DDL skipped due to missing object
    ORA-01403: no data found
    ORA-00942: table or view does not exist
    OS : RHEL 4 (IBM P5)
    DB : Oracle 10g (10.2.0.1)
    Achyot

    Please let me know if can skip the DDL at which it is failing.
    ALTER DATABASE STOP LOGICAL STANDBY APPLY;
    Use EXECUTE DBMS_LOGSTDBY.SKIP
    ALTER DATABASE START LOGICAL STANDBY APPLY;
    Thanks,
    Renu

  • .xml get  disformatted after adding a new Element

    Dear friends!
    I have a xml file when i add a new element to this its formatting
    get destroyrd. Plz help me to keep them in proper shape.
    before adding:
    <person>
    <name>xyz</name>
    </person>
    after adding a new name element:
    <person><name>xyz</name> <name>new 1</name><person>

    ok, so using JAXP (which is embedded in JDK 1.4 so if you use this JDK no need to add anything on your classpath).
    0. few imports
    import org.w3c.dom.*;
    import javax.xml.parsers.*;
    import javax.xml.transform.*;
    import javax.xml.transform.dom.*;
    import javax.xml.transform.stream.*;1.load the XML file in a DOM:
    Document doc = DocumentBuilderFactory.newInstance().newDocumentBuilder().parse("c:/data/myxmlfile.xml");2. manipulate the DOM, see:
    http://java.sun.com/webservices/docs/1.0/tutorial/doc/JAXPDOM7.html#65002
    3. save the DOM:
    Transformer transformer = TransformerFactory.newInstance().newTransformer();
    transformer.setOutputProperty(OutputKeys.INDENT, "yes");
    transformer.setOutputProperty("{http://xml.apache.org/xslt}indent-amount", "1");
    transformer.transform(new DOMSource(doc), new StreamResult(new FileOutputStream("c:/data/myxmlfile.xml")));hope it helps.

  • How to select which cloud service to save the contact everytime I am adding a new contact

    What I really love about android is that you can choose which account to save contacts every time you are adding a new contact right in the "New Contact" form.
    Since I changed my phone from beloved nexus 5 to iPhone 5S (Just kidding) I could not this feature in iPhone contact. It is only possible to choose your default contact service from setting, but what I need is that AS I am adding new contact I get to change the destination for this contact if I want.
    Thanks Guys

    You can set up groups for your contacts but you need to log in to www.icloud.com on your computer and do it in settings there.  Other than that I am not aware of any way to achieve what you want

  • HT3529 Contacts not found in contact list after saving from new text message

    When a new number texts me and I save it to my contacts, I can find that contact when texting, but contact does not show up on my phone list contacts.  For Example: I received a text message from (555) 555-5555.  I  #1 clicked "Contact" in the top right corner of the text message screen, #2 clicked "i" button, #3 clicked "Create New Contact," #4 added first and last name, and #5 clicked "Done." 
    In the future, if I try and text that saved number, the contact will appear under the saved name.  But if i press the phone icon and look at my contact list, the contact is not there.  So if I try and text "Heather Campbell" i can find the contact by clicking new message and typing "Hea" and send her a text message with no problem.  However if I go to my phone contact list and try to call her, she is not listed as a contact.
    Please Help!

    Unfortunetly, that's not the problem.  I have 3 groups.  1. All iCloud  2. All Hotmail  3.  All Facebook.  I have the All iCloud checked, i do not want facebook friends and email addresses in this contact list.  This will only give me a list of phone numbers I saved from call log.  Not phone numbers I saved through text message.  Thank you though!

  • Adding a new contact anymore after the IOS5 upgrade!

    I can not add a new contact anymore after the IOS5 upgrade - the " + " sign is gone? - how can this be fixed?

    I think cpohlink has made a good observation.  The same issue- no plus sign- is showing up in both calanders and contacts for some people.   I have the plus sign on both apps, and do not have the problem at all.  So what is the difference?
    I have i cloud turned off for everything but find my phone.  And i am not synced to any external calander or contact list except my phone.
    Change your cloud settings to off, and see if that does it.  Also, think about what other clalanders/ contact lists you might be syncing with.  If they ae considered the 'master' then that may make the pad pad a slave, and unable to add entries.
    Related question, can you edit entries, or is that blocked as well?

  • Sequence of items in 'to do' list now abritary after adding a new calender

    Hi I doubt there is a fix for this but I would like to understand the problem.
    I added a new calender (on the left, in a new color) and my to do list is now scrambled. The sequence of items was important, they were grouped, and now they seem to be in a random order. I'm not using priorities.
    WHY?! : )
    Perhaps now is a good time to switch to a competitor?
    Any thoughts?
    Thanks
    Matt

    For some reason the actual Task in the process is not being completed. If you see the same Task ID then you are probably still looking at the same actual Task because if a new Task was created, it would still get a new ID incrementing in value. What happens when you select the green check mark in the Task card in Workspace (rather than complete from the form view). If this works then perhaps there is something wrong with the submit button on your form. Also, what version of Reader are you using?

  • Application Path Member will be deleted after adding a new Application Path Member in another Application Path List

    I expirienced the behaviour that the first item in the Application Path Member from a Application Path List will be deleted as far as the first item in the Application Path Member List will be selected in anather Application Path List without saving. This is according to severals peripherals as well.
    Example:
    Configuration Manager > Application Path List
    In the Application Path List "McalMediaRouting" the following Application Path Members are configured.
    For this example, the first Media Routing Domain for the Peripheral is Chat.
    Now, adding a new Application Path Member for the Application Path List "SiebelMediaRouting" with a new Media Routing Domain, which is not yet assigned to a Application Path List.
    Select the same Peripheral PG1A_CCM and choose the new MediaRouting from the list. At this point the Application Path Memeber with the Media Routing Domain "Chat" will be deleted in the Application Path List "McalMediaRouting". This will be deleted even without saving it.
    UCCE Version 9.0.2 used.
    Is this per design or is this a defect?
    Kind regards
    David

    HI
    add that fileds in the all locations where you need it like
    in internal table declaration , write statement , select statement
    these are the main areas where you have to add that 2 fileds

  • Issues with Writing back data to Planning Cube After adding a new characterstic

    Hello,
    We have two cubes and a MP on top of it. ( Reporting Cube and Planning Cube ). An aggregation layer has also been built and so does a planning BEx query on top of it.
    Before Scenario: things were working fine as we were able to write back data to planning cube using the BEx.
    After Scenario: We created a new Dimension in the planning cube and added a new characteristic ( lets call it ZX_KEY ) . This Characteristic holds the concatenated values of some of the other characteristics in its master data tables . ( For ex: Account_Customer ID_Country-code_Industry-code ).
    This new characteristic is also present in the reporting cube and has been added and transferred to MP.
    This new characterstic was added to the planning BEx query as one of the rows and we executed it the analyzer. After entering the required values for all characterstics ( including the newly added ZX_KEY ) and the key figure values, we tried saving it. Now this is where the Analyzer is throwing up this error..
    ~~Characterstic combination cannot be assigned to part provider ~~
    ~~Characterstic 'ZX_KEY'; Characterstic value 'R123000000_12_US_TX'~~
    ~~ Entered values are incorrect:Correct before navigation ~~
    The value that we are entering ( R123000000_12_US_TX ) is picked up from the master data table of ZX_KEY by double clicking and selecting it from the fetched values. So i am not sure as to why its throwing up the above error. Request your help on this please.
    regards,
    Karthik

    Hi,
    Try to check that all characteristics are correctly assigned at multiprovider level.
    hope it helps

  • Adding a New Contact Record link in a report

    Dear Gurus,
    I've followed instructions on how to create a New record link in a report using instructions from the Oracle CRM On Demand Reporting book but needed additional help in terms of how to auto populate the Account Name onto the New Contact Edit screen. I've created a custom Contact report that is setup as a web applet to replace the OOB Contact section that is showing on the Account Detail screen.
    On this report, I've created a hyperlink that opens a New record edit screen for a Contact record. I need to pass in the Account Name since this is a required field on the Contact Detail screen and needed help with the URL that I've entered as a custom text format in the column formula. From the M. Lairson's Reporting book, I've entered:
    @[html]*a href="/OnDemand/user/ContactDetail?OMTGT=ContactDetailForm &ContactDetailForm.Id="@target="_
    top">"Contact Details"*/a*
    (html not displayed correctly - I've to substitute < and > with *)
    This worked great but I need to pass in the Account Name. Can you help with a URL that will do what I needed? Thanks.
    Edited by: TTone on Jul 26, 2010 12:16 AM
    Edited by: TTone on Jul 26, 2010 12:27 AM

    Hi,
    Copy the URL from the contact create link and pass the values like Account Name etc by adding it to the URL, use & to separate the values.
    hope it helps,
    Mayank

  • Unexpected error durung process after adding a new measure group

    I add a new measure group with distinct count in my cube
    I process my cube then I have:
    Erreur interne : Une erreur inattendue s'est produite. Erreurs dans le moteur de stockage OLAP : Une erreur s'est produite lors du traitement de la partition 'Requirement' du groupe de mesures 'Formalized 1' pour le cube 'Requirements_view' à partir de la
    base de données SeikoCube. (internal error : unexpected error happens ... An error occured when processing the partition for measure group for the cube)
    If I delete this measure, it works well.
    Whap happens ? How could I resolve it ?
    Thanks in advance

    Hi Fiacre663,
    According to your description, you encounter the error while processing the cube after added the distinct count to cube, right? In your scenario, which process option are you used to process the cube?
    Generally, if you add a measure you are changing the structure of the cube which will invalidate the cube, the easiest way to get the cube "fully operational" again would be to do a ProcessFull. The same thing applies when removing a measure.
    Besides, please ensure that the steps to add distinct count are correct. There are different options for creating a distinct count measure in SSAS. Please refer to the link below to see the details.
    http://www.mssqltips.com/sqlservertip/3043/different-options-for-creating-a-distinct-count-measure-in-ssas/
    Regards,
    Charlie Liao
    TechNet Community Support

  • How do i access my contact list to add a new contact

    i cannot add new contacts to my e-mail contact list. The screen shows no contacts when I try to add new contacts.

    Right out of the box, Firefox doesn't store contacts. Are you working with the features of a particular email website, or is your question about Thunderbird?
    For an email site, you could mention which one it is for more specific assistance. Meanwhile, when you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
    1. Clear Firefox's Cache
    orange Firefox button ''or'' classic Tools menu > Options > Advanced
    On the Network mini-tab > Offline Storage : "Clear Now"
    2. If needed, delete the site's cookies here
    While viewing a page on the site, right-click and choose View Page Info > Security > "View Cookies"
    Then try reloading the page. Does that help?

  • IdeaPad S205: BIOS/EFI menu not accessible after adding a new boot entry using the bcfg command

    Hi community,
    I just got a new S205 and wanted to install Win7 and archlinux in dual boot (GPT formatted SSD).
    Win7 installation worked like a charm. Archlinux worked well aswell, unfortunately i couldn't make a boot entry following this guide: https://wiki.archlinux.org/index.php/Beginners%27_Guide#EFISTUB
    So i had to manually create the boot entry using bcfg command in an efi shell:
    https://wiki.archlinux.org/index.php/Unified_Extensible_Firmware_Interface#bcfg
    The first attempt (I double checked that i got the right filesystem [fs0] and so on) failed and resulted in an automatic reboot. After this I immediately reentered the efi shell and tried again. This time I could create the boot entry.
    Now if I reboot everything seems fine (I can dual boot Win and arch) BUT I cannot access BIOS/EFI menu via F2 anymore. It seems like it just does not exist anymore. How do I get it back? Should I just flash over with the original EFI from the Lenovo download page? I could theoretically do that (I can still change boot order using my arch live medium), but i could not reset EFI prior to flashing... which is always recommended to do.
    So I am - again - pretty stuck with this EFI. I hope you can help and tell me what to do.
    This EFI-Implementation on the S205 must be the worst piece of "engineering" ever.
    Nothing works the way it is intended to... I would not dare to wash my hands clean off any faults, but ADDING a boot entry resulting in a not accessible BIOS/EFI menu... there's just something wrong.

    At least I now know what the problem is:
    It seems like the S205 can only keep 7 boot entries in NVRAM (Can anybody concern?).
    As I already have 7 boot entries:
    adding a new entry using efibootmgr tool does not work (fails without error) and gummiboot doesn't work either. Nevertheless, adding a boot entry (for rEFInd) from within the UEFI shell works, but seems to result in deleting "Boot0000" aka Setup which then breaks my EFI. Breaking meaning that I cannot access it anymore.
    I can however (and did so twice yesterday) flash the original EFI from within Windows and thus gain access to the EFI menu again. Nevertheless this resets my boot entries again so the refind (or gummiboot) bootloader gets deleted again and only Win7 is bootable.
    Now what would be the smartest way to dual boot this system? Which of the boot entries is safe to delete so i could install refind/gummiboot instead? For instance, I don't know where USB FDD and USB CD come from. Can I delete them? Or won't I be able to boot from external CD-ROM or USB drive anymore if I delete them?
    Or would it be best to delete the Win7 bootloader and try to have refind/gummiboot boot it? And will they at all be able to still find the Win7 boot files once I deleted Win7's boot entry? When I install refind as bootloader and manually add an boot entry for it using the bcfg boot add command it is able to load Windows7. But will this still be possible if I delete the Win7 boot entry? It would most likely be possible - I assume - if the Win7 boot files (on the EFI system partition) were still there even after deleting the boot entry. Can someone tell me how deleting a boot entry exactly works and which files get or don't get deleted?
    Best regards.

Maybe you are looking for

  • Connect a Thunderbolt Display to a mid2009 MacBook Pro with mini Displayport?

    Hello Fellars, Is it possible to connect a Thunderbolt Display to a mid2009 MacBook Pro with mini Displayport? Best regards,

  • How can I register a second hand mac book to my apple account?

    I just bought a second hand mac book, and I would like to register it to ;y account to be able to access things (like my ibooks) registered from my iPad directly on my mac book. the previous owner asked the apple supprt and they said I need to contac

  • Hangtime, did you know....

    a novice user much like myself can download a midi software program thing- fire up GB- fire up I tunes and then play the soft synth to my I tunes, which is hooked up to large external speakers with even larger amplifier- i can play along with my favo

  • Operating System Login Credentials

    I have setup an Oracle 11g Database and have a question about backing up the database. Currently, I have logged into the database via Enterprise Manager. I have browsed to the Availability->Backup settings and I see that at the bottom of the page I n

  • Editing Adobe PDF print documents

    I am using Adobe Acrobat Professional 8.2.6 in Vista OS. I normally print  documents into Adobe PDF and save it.  I want to copy some of the text from that document by selecting a sentence in the document.  However, I am not able to do it in the prin