Two-step movement (warehouse-warehouse)

Hello, colleagues!
My issue is following. I am conducting two-step movement (warehouse-warehouse). I have created, let me say, three movement documents (Operation: out of stock. Other. Kind of motion 313). The material is in the movable reserve (stock). Next, I need to take all the materials of a roaming reserve by one movement document with reference to all three movement documents (Operation: Take to the warehouse. Other. Kind of motion 315). How to do it? And is it anyway possible?
Thanks for your answers.

Since all three materials are currently in stock-in-transfer, you should be able to receive all three in single MIGO_TR (place into storage) with 315 transaction. In the transaction, close the header tab which will expand the item overview with multiple entries and you can enter all three materials with the destination information. Once you save it, you'll get a single material document referencing these 3 placements.

Similar Messages

  • Canu00B4t use two step transfer with split valuation ?

    Hi people , i´ve activated split valuation for MaterialX , it has two Valuation types ( Production and Purchase ) . The problem arose when i tried to do a two step transfer between plants ( mov 303 ) and i got the following error msg :
    Use one-step procedure for transfer posting to mat. subj. to valuation
    Message no. M7048
    Diagnosis
    In the receiving plant, the material is subject to split valuation. For this material, a stock transfer cannot be carried out using the two-step procedure.
    Procedure
    Use the one-step procedure (movement type 301) or a stock transfer order for the stock transfer.
    The message is very clear itself , but... i just wonder if there`s actually any way to avoid this, considering that having to create a transfer order for each movement will duplicate work and using a one step transfer won´t be practical. I tried to change the error msg into a warning but couldn´t find it in customizing. Thanks for any comments on this !

    First of all , thanks everyone for the help.
    Csaba Szommer, Kunal ingale  , i read the OSS note and the pdf and indeed everything confirms it´s not possible to do the two step movement. So , i tried the stock transport order and something else appeared here. When creating this type of order , the system first ask for a Supplying Plant , then you can populate the material , quantity and the destination plant. But then it asks for the Valuation Type of the material involved, and it seems this field is Mandatory . Is it possible to make this field on the transport order as optional ? I couldn´t find this field at SPRO-MM-Purchasing-Purchase Order-Define Screen Layout at Document Level .
    I need this field to be optional for the following reason. In my company there´s a relation between two plants , Plant A ( from where products are dispatched to the customer ) and Plant B ( where the material is produced with valuation type "Production" and sometimes is buyed from vendors with valuation type "Purchase" ) . The idea is to run an MRP which will generate the material needs on Plant A considering the Sales Orders. This need will be then transformed (automatically by MRP ) in Stock Transport Orders with Supplying Plant "Plant B" and receiving "Plant A". The problem here is that , at the moment of the transport order creation it´s no possible to know which will be the valuation type of the material that will satisfy the need. I mean , Plant B ( production and buying plant ) will check the list of needs for Plant A and then will decide which material ( with which Valuation Type ) they will provide considering the actual stock levels at the time of the MRP run.
    In a few words, i see the only way to do a two step transfer of a split valuated material is using Stock Transport Orders , is there a way to make the field "Valuation Type" optional ?. The idea would be to choose the Valuation Type of the material at the moment of the Good Issue.  Thanks a lot , once again.
    Edited by: Christian  Len on Jul 7, 2008 3:16 PM

  • One/Two Step STO by Document Type

    Hello,
    We have a requirement where we would like to use two different (UB) STO document types, one utilizing a one-step STO the other a two-step STO for the same supplying / receiving plant combination.  We have different delivery types associated with the two STO document types. 
    The standard configuration appears to enable/disable one-step for all document types between that shipping and receiving plant combination.
    I was hoping to create a new schedule line assigned to a new item category for the one STO type which has the 641 movement type removed, but when I try that the delivery is not being distributed to out decentralized WM system.
    Thoughts or other approaches?
    Best,
    Matt

    I was able to solve this as I was on the right route with schedule line category.  I have created a new schedule line category which in turn is assigned to my item category, delivery, and STO document type I wish to use for the one-step STO.  I that schedule line configuration I have specified both the one-step and two-step movement types as 647.

  • Two step confirmation for warehouse tasks in EWM

    Hello everybody,
    I am working on an internal prototyp to evaluate SAP EWM. Therefore it is essential that we use "two step confirmation" for warehouse tasks. Step one: confirm pick up of a pallet; Step two: confirm transportation of a pallet. Like it is used in SAP WM (Parameter I_QUKNZ in function module L_TO_CONFIRM and in standard SAP).
    I haven't found anything similar to that in EWM so far. I searched in the official EWM SAP Press book and also in google. But right no I don't have any idea.
    Do you guys have any hints on how to achieve two step confirmation somehow?
    Many thanks in advance!
    Stef

    Hi Jürgen.
    Thanks for your input! You are right, it works with RF!
    But it works kind of strange. Deleting source storage bin, creating another position etc.
    I will have a look how to adapt this.
    Thanks!

  • Two step confirmation in Warehouse

    Hi All,
    Two step confirmation (We can use this indicator to define whether confirmation of the withdrawal of materials from a storage bin and arrival of materials at the target storage bin is allowed in the warehouse in two steps) indicator has been set for my warehouse.
    As the two step confirmation is becoming heavy for the warehouse team, that need to be changed as a single step confirmation.
    Will there be any impact on open TOs if i change this from two step to single step confirmation. Will there be any other impacts on warehouse environment.
    Rgds
    Raul

    My suspicion would be that the configuration settings are referenced during TO creation and that TOs are then 'locked' with these settings.  So the impact would not be significant, all existing TOs, just created or part processed would need to be completed using 2-step and that new ones would be single step.
    Why not just trial it in your development system. Possibly all TOs just become single confirmation and the pick confirmation for existing TOs, where that has happened, becomes irrelevant.
    Regards,
    Nick
    Edited by: Nick Whitehurst on May 21, 2010 3:30 PM

  • Warehouse Managment (Two-Step Picking)

    Hi,
    This is with reference to Two-Step picking procedure, which is not getting activated. Though we have done all customization required for TR and Delivery’s as well, as referred in the documentation provided by the SAP. The settings done are as follows.
    01)     Activation of Two-Step picking at WM Global level.
    02)     Transfer Requirement control
    03)     Transfer type control
    04)     In article master, relevant for two step picking.
    05)     At Storage type search level.
    Now when try to initiate the process with transaction LT41 putting shipment type i.e. A (Stock Removal) system displays a message “No data available for the specified criteria” or if thru LT0E, system asks for a group in WM.
    But when we go and try to create the single TO thru Delivery using t_code (LT03) system displays an information message, i.e. Two step picking relevancy will be lost.
    Regards,
    Aquil Husain

    Hi Aquil
    Have you set up Group processing for TR and Deliveries?
    In order to manage 2-step picking you have to work with groups / collective picking
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/c6/f85c504afa11d182b90000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/c6/f85c504afa11d182b90000e829fbfe/frameset.htm
    Have a look at the help to review the process
    Regards
    Steve

  • Report to track interlinked movement of a material in a two step transfer

    Request your input for the following
    The scenario is that the stock transfer  from one storage location to the other happens a two step transfer (313 and 315). To track the invenotry movements they want a report on a daily basis (gap of 24 hrs, 48 hrs etc) which can list down all the details at item level for materials for which the movement type 313 has happened but movement type 315 still needs to happen and the time gap between these two steps (i.e wether it has been 1 day or two days. etc.).
    Is there is a standard report  for movement types which are interlinked (like in this case 313 and 315 ) through which we can track what is the time gap between the first and second movement type and how much stock is waiting for the second step to happen before it can be avaialable to sell.
    Thanks

    Hi,
    Refer report MB51
    here in selection screen enter mvmt types 313 and 315 and execute
    Here add following fields in layout;
    Entry Data and Time of Entry and anlayse the time duration for the movements 313 and 315.

  • LE-TRM: Two-step confirmation

    Dear all,
    Could you please provide a link to a SAP documentation which stipulates that Two-step confirmation settings (SPRO > Logistics Execution > Warehouse Management > Activities > Confirmation > Confirmation control for Warehouse number / Storage type / Movement type) are mandatory in order to have TRM tasks created?
    Thx a lot in advance

    Hi Sandeepan,
    Can you please check the two settings in tcode OMLX (Path:IMG u2192 Logistics Execution u2192 Warehouse Management u2192 Activities u2192Confirmation) The first of these is the requirement to confirm the pick and placement of a transfer order separately and the second is the requirement to confirm placement and removal of stock into and out of a storage type. For the second setting, by default, the requirement to confirm is switched off in interim storage types.
    Other than above setting you need to check which mode is considered to find the rout till destination bin of the TO.
    Hope this will help.
    Regards,
    Sudhir

  • Two step confirmation with RF device (Mobile Data Entry) - 1st step only

    Hello
    I want to implement the following scenario:
    - WM transfer orders are created, relevant for two step confirmation;
    - a user working with RF device confirms the 1st step - picking;
    - then the materials are transported physically to another building (the same warehouse number);
    - another user working with RF device confirms the 2nd step - putaway.
    For confirming the 1st step I tried to use standard transaction LM07. Confirmation of the 1st step is working fine but right after that a screen for confirming the 2nd step is displayed to the user. I would like this transaction to finish just after confirming the 1st step and not to proceed with the 2nd step immediately - because the confirmation of the 2nd step should be done by another user (with some other transaction).
    What is more: if you exit the transaction manually after confirming the 1st step the system saves the TO number (in table LRF_WKQU) and in some circumstances triggers the screen for confirming the 2nd step even if you do not run LM07 - this is so called "recovery" function which is a nuisance in my case.
    So my question is: is there a way to customize LM07 so that it finished processing automatically right after confirming the 1st step for a two step confirmation TO ? (and without storing data for "recovery" function). Or maybe some other mobile-data-entry transaction should be used for that ?
    regards

    Hi Vlad,
    One more information, which i would like to communicate on this issue.
    We have raised OSS message to SAP on this issue. They have replied back that, on screen 1302, we have some custom code which is interfering with the system behavior.
    As of now, we have analyzed at our end, and we found that, the enhancement at screen 1302 is restricted for the functionality, and in theory, this enhancement should not be effecting at all the system behavior.
    SAP has suggested to test the scenario , without any enhancement on screen 1302.
    Still we are in discussion with SAP, and try to find out the resolution.
    Can you also check in your system, if you have any enhancement on screen 1302 ? And if yes, does it interfering with the stander SAP codes.
    Thanks & Regards,
    Raj.

  • Two-step confirmation of Transfer order in WM

    Hi
    We are confirguring 2 step confirmation.
    We have activated 2step conf, for the warehouse & marked corfirmation mandatory for the storage types,
    However we are not able to perform confirmation for Pick & Transfer step.
    Please let us know  on how to configure two step confirmation.
    Thanks,

    Hello Abhay Desai,
    Please kindly refer to SAP Library which has provided the following documentation on 2-step picking:
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/c6/f83e4d4afa11d182b90000e829fbfe/frameset.htm
    I would suggest you to go through the prerequisites and steps in 2-steps pikcing in the given documentation. You should also be able to access to above with the following path:
    http://help.sap.com >> SAP Library
      --> SAP ERP Central Component
           --> Logistics
                --> Logistic Execution
                     --> Warehouse Management System
                          --> Goods Issue
                               --> Two Step Picking.
    Hope the above helps. If question answered, please close and reward points. Otherwise feel free to get back.

  • Two Step Confirmation Transfer Order with Radiofrquency

    Friends & Gurus.
    Can I use 2 step confirmation with RF? Which transaction should I use? I can do it with regular SAP transactions, but as soon as I do it with RF transactions both Pick and Transfer are confirmed.
    Thanks.
    Solved, yes you can.
    Edited by: albertiosis on Oct 3, 2008 2:48 PM

    Hello Abhay Desai,
    Please kindly refer to SAP Library which has provided the following documentation on 2-step picking:
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/c6/f83e4d4afa11d182b90000e829fbfe/frameset.htm
    I would suggest you to go through the prerequisites and steps in 2-steps pikcing in the given documentation. You should also be able to access to above with the following path:
    http://help.sap.com >> SAP Library
      --> SAP ERP Central Component
           --> Logistics
                --> Logistic Execution
                     --> Warehouse Management System
                          --> Goods Issue
                               --> Two Step Picking.
    Hope the above helps. If question answered, please close and reward points. Otherwise feel free to get back.

  • Two-Step picking in Lean WM.

    Hi all!
    Is it possible to configure two steps picking when you have a Lean WM implanted? My client wants to explore the possibility to use this functionality in his warehouse, but he has a lean WM, not a full one.
    I have configured IMG --> Logistics Execution --> Warehouse Management --> Interfaces -->  Shipping --> Two Step Picking
    In my tests, I have grouped the deliveries and when try to create the correspondent TO, system sends a message saying that it is not possible in a Lean WM.
    We are using SAP ECC 6.0
    Thanks for any help.

    Hi
    Lean warehouse management implement for the warehouse where proper storage bin (High rack structure or location management) are not available and user want to do the picking using pick list. In this case there is a dummy bin defined in the system which helps the user to group the deliver and create a transfer order.
    To leverage the 2 step picking functionality of warehouse management you should have proper location management ( Warehouse management) activated.
    Hope this will help
    Regards
    Manish

  • Two step confirmation

    Hi All
    Do we have any thing like two step confirmation in Warehouse Management.
    Thanking you
    With Rgds
    Vinod

    Yes it's a terminology where the stock removal and putaway requires two separate confirmation. You can have a look in T-code OMLX and click on Mvt Type button for more info.
    Amit

  • Stock transfer between plants two steps 303-305

    Dear All,
                    We are using version SAP 4.7 we are using stock transfer scenarion between plants two steps. 303-305 source plant they will remove the stock  with 303 movement in the receiving plant they will receive the goods against the 303 document number.
    at the time with 305 movement type one document generated in that document table MKPF 303 reference number should be updated but in the 305 document the reference document 303 not updated in table MKPF.
    why?...any updations required. because i want to develop an user exit at the time of Goods receipt with 305 movement in the receiving plant now it is allowing posting date as <= 303 document posting date it should be allow only >=303 document posting date at the time of 305 document generation in the receiving plant.
    in MKPF table the reference document is not updating ....any ideas....
    im using the standard Enhancement :MBCF0002
    EXIT_SAPMM07M_001.
    Regards
    Anand..

    Hi..
        then how can control.
    receiving plant 305 document posting date is should be greater than or equal to source plant 303 document posting date how can achieve this?.
    via user exit in the reciving plant 305 document the reference document not updated. how to achieve this?...
    any ideas..
    Regards
    P.Anandhakumar

  • Stock Transfer between plants two steps.

    DearAll,
                 We are using the scenario stock transfer between plants two steps.in the source plant we are issueing the goods  with on 303 movement in MIGO with Remove from storage option. in the receiving plant we are receiving the goods with refernce to 303 material document in MIGO with place in storage option.
              we are using the version SAP 4.7.
    my problem is at the time of goods receipt SAP is allowing to the posting date less than the source plant 303 document date. it should allow the posting date as Greater than equal to source plant document date at the time of GR.
    Any standard pracktise is there.
    for example  source plant 303 document date is 08.06.2009 wrongly i have entered the receiving plant 305 document posting date as 06.06.2009 it is allowing to post it is not throw any information. it should not allow to know.
    i want to control this. any standard controls is there. kindly help.
    Regards
    P.Anandhakumar
    Edited by: Anandhakumar Palanisamy on Jun 9, 2009 10:46 AM

    Except user exit , Is it possible any standard functionality.?
    why SAP not controlled this?.
    this is SAP bug or not?. kindly clarify..
    Regards
    P.Anandhakumar....

Maybe you are looking for

  • How can I transfer all my documents to the ICLOUD drive?

    How can I transfer all of my documents on my Mac to the ICLOUD drive without doing it Manually one by one?

  • Photo Management App

    I am interested in an app to handle some relatively basic activities for organizing photos on my iPad: moving copying, folder management, etc. I prefer simplicity and elegance to a bunch of features. Thank you for your thoughts on this. -Bruce

  • Format Question - Biz Objects

    I created a report with 8 data fields; I added a 9th column and included a formula that provides a 'status' for a given line item based on the data pulled within the report.  There are three seperate statuses; I then inserted a break which now sepera

  • Masking a Solid Layer with an Effect

    Should be easy, you would think. I have a solid layer (white) with a radio waves effect applied to it.  I've got the effect dialed in and it's what I want, but I want to mask off just a triangular portion of this layer, creating a beam shape (not emi

  • TS3477 I can not get my second display to work

    HI i have a mid 2010 mac book bro 13", I had it connected to VGA display and now it doesnt display anything or identify the second screen. This happened over night. please help