Two step picking modification

Hi all,
Three simple questions on two step picking:
1) When I delete a pick TO inthe first step of two step picking process the status of pick step on the group still reamains completed and I cannot create pick TO again. How to sort out this?
2) If the pick TO is not created yet I'd like to add another TR to the group. But I didn't find a change group transactions. Once the group is created, it looks like no modification is possible but editing two step relevance on some group's item. How it is expected to do this?
3) How to set a storage type not relevant for two step picking? I've seen that only materials can be set as relevants for two step picking.
Best Regards

Hi
Let me explain how two step picking works
Within the 2-step picking process the first step can be repeated many
times because changes of the assigned deliveries may occur or the
requested quantities are not completely available the first time but
the 2nd step the actual picking is done once and marks the completion
of the process. This cannot be repeated for the reference number. If
there are individual delivery changes the TO can be created using LT03
but the multiple processing is no longer possible.
TO confirmation takes place only when the stock is completely moved.
It would not make sense to confirm the movement and then to the
allocation step. The two-step picking process is
1. Pick step (Where stock is picked from the source bin)
2. Allocation step (Where stock is allocated in the destination bin)
3. Confirmation (Where the picker confirms that the movement has been
completed)
You either carry out the first two steps seperately (2 -step picking)
or at the same time. Either way, the confirmation always takes place
last. Hope the above helps to clarify.
Regards,
Ramana
Edited by: A.L.V Ramana on Dec 18, 2009 1:05 PM

Similar Messages

Report for field sammg and refnr in two step picking

Hello Experts,
I have configure two step picking which is working fine.
But my concern is when I create a group from deliveries using VL06P, an five digit number (23717) is generated. But while putting same group number in LT72 screen for analysis or doing LT0E, I am getting en error that "this group number is not existing in system.
Then I have to go to SE16 and search in table T311. Then I found that there are two group number in this table which technical name are REFNR and SAMMG. So I have to pass 23717 in SAMMG field and note down the number (17) from REFNR field and process with REFNR number.
So is there any report whether I can get the same (when I pass SAMMG number I will get REFNR number) because my business user don't have access to SE16 again it is not acceptable to business.
Or is there anyway by which I can assign same number to both SAMMG and REFNR, so that my client will refer only one number in stead of two number.
I am hereby attaching one test data. Kindly go through it and revert to me with your analysis.
Best Regards,
Raghu Nayak.

as an standard SAP you should be able to process the group number(23717) it seems there is some other setting / customization or you are following any additional steps in your system which generates the another number in Group (REFNR) field of T311 as in my case i am getting the same number in both the Group field
Have a look on the below mentined existing wiki which was shared earlire by SCN member Susheel Tiwari / Pankaj Agarwal
Two Steps Picking Process in SAP-WM

TWo-Step Picking

Hi,
We have a requirement to perform two step pick - that is the system needs to create Two TO's
1. one for the picking material from the racks into a interim location in our case it would be Tub's - so the first part is confirmed when the material gets picked from the rack into tub.
2. Once the material is all picked the tub's are moved into Packing area -- where the material is once again verified and packed and in this process the user confirm the second leg. which moves it into the interim storage type of 916
3. After the two to's are confirmed they system should let the user perform the PGI.
I did check the documentation for Two-Step Picking on the SDN and have done the config accordingly but now the system is throuwing up error while converting the delivery into TO it says the grouping has not been done.
Not sure what am i missing - could you let me know the steps that need to followed to get this working.
Regards
Havish

Hi Sudhir,
Thanks for the reply, I did create a Group for type " K ".
The above error comes up while creating the TO (for stock Removal), but srprsingly when i run the LT72 it says the group does not exist.
I have done the following:
LE> WHM-> Activities->Transfers-> Set Up 2 Step picking --- put in the details for the WH as required
LE> WHM-> Interfaces--->Shipping ---> Two-Step picking -
put in the details for the WH as required
Created a Delivery --- VL10b
Created A group for the above delivery -
VG01
Now when I check for Group under LT72 is says the group does not exist
also when i try to create the TO for the group it throws up the as per my earlier post.
Could you guide me what is the mistake am doing
Regards
Havish

WM - Two Step Picking

Hi experts,
I have a problem with a program I'm creating.
In this program I'm doing a call transaction to LT03 for an outbound delivery.
When I do that, the message number L3 720 "2-step picking relevance will be removed since no relevant group" which is normally a Warning Message is appearing as an error message.
When I go through debugging, in the code, it also appears as a warning message, but when I execute it online it appears in red.
Does any one has an idea on that issue ?
Thanks in advance.
Best regards,
Remi

Hi,
Thanks for your reply.
All the materials go through a two step picking process in my business process.
So each time I create a picking process, It is put in customizing that the field "Relevant for 2 step picking" is marked by default.
The problem that I have is when I want to do a picking without the 2 step process.
It is a warning standard message, and It's working fine online but when I'm doing it through function module L_TO_CREATE_DN, instead of a warning message, the systems shows it as an error message and does not let me go through the rest of the process.
Moreover when I go through the debugging function the message is MESSAGE W720 where W is "Warning".
I don't understand why online, the system gives me a warning message and through function module, the system gives in the code a warning message that appears as an error message on screen.
I anyone has an idea it would help me.
Thanks.
Remi

Two-Step picking in Lean WM.

Hi all!
Is it possible to configure two steps picking when you have a Lean WM implanted? My client wants to explore the possibility to use this functionality in his warehouse, but he has a lean WM, not a full one.
I have configured IMG --> Logistics Execution --> Warehouse Management --> Interfaces --> Shipping --> Two Step Picking
In my tests, I have grouped the deliveries and when try to create the correspondent TO, system sends a message saying that it is not possible in a Lean WM.
We are using SAP ECC 6.0
Thanks for any help.

Hi
Lean warehouse management implement for the warehouse where proper storage bin (High rack structure or location management) are not available and user want to do the picking using pick list. In this case there is a dummy bin defined in the system which helps the user to group the deliver and create a transfer order.
To leverage the 2 step picking functionality of warehouse management you should have proper location management ( Warehouse management) activated.
Hope this will help
Regards
Manish

Warehouse Managment (Two-Step Picking)

Hi,
This is with reference to Two-Step picking procedure, which is not getting activated. Though we have done all customization required for TR and Deliverys as well, as referred in the documentation provided by the SAP. The settings done are as follows.
01)     Activation of Two-Step picking at WM Global level.
02)     Transfer Requirement control
03)     Transfer type control
04)     In article master, relevant for two step picking.
05)     At Storage type search level.
Now when try to initiate the process with transaction LT41 putting shipment type i.e. A (Stock Removal) system displays a message No data available for the specified criteria or if thru LT0E, system asks for a group in WM.
But when we go and try to create the single TO thru Delivery using t_code (LT03) system displays an information message, i.e. Two step picking relevancy will be lost.
Regards,
Aquil Husain

Hi Aquil
Have you set up Group processing for TR and Deliveries?
In order to manage 2-step picking you have to work with groups / collective picking
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c6/f85c504afa11d182b90000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c6/f85c504afa11d182b90000e829fbfe/frameset.htm
Have a look at the help to review the process
Regards
Steve

Two-step confirmation of Transfer order in WM

Hi
We are confirguring 2 step confirmation.
We have activated 2step conf, for the warehouse & marked corfirmation mandatory for the storage types,
However we are not able to perform confirmation for Pick & Transfer step.
Please let us know on how to configure two step confirmation.
Thanks,

Hello Abhay Desai,
Please kindly refer to SAP Library which has provided the following documentation on 2-step picking:
http://help.sap.com/erp2005_ehp_03/helpdata/EN/c6/f83e4d4afa11d182b90000e829fbfe/frameset.htm
I would suggest you to go through the prerequisites and steps in 2-steps pikcing in the given documentation. You should also be able to access to above with the following path:
http://help.sap.com >> SAP Library
--> SAP ERP Central Component
       --> Logistics
            --> Logistic Execution
                 --> Warehouse Management System
                      --> Goods Issue
                           --> Two Step Picking.
Hope the above helps. If question answered, please close and reward points. Otherwise feel free to get back.

Two Step Confirmation Transfer Order with Radiofrquency

Friends & Gurus.
Can I use 2 step confirmation with RF? Which transaction should I use? I can do it with regular SAP transactions, but as soon as I do it with RF transactions both Pick and Transfer are confirmed.
Thanks.
Solved, yes you can.
Edited by: albertiosis on Oct 3, 2008 2:48 PM

Hello Abhay Desai,
Please kindly refer to SAP Library which has provided the following documentation on 2-step picking:
http://help.sap.com/erp2005_ehp_03/helpdata/EN/c6/f83e4d4afa11d182b90000e829fbfe/frameset.htm
I would suggest you to go through the prerequisites and steps in 2-steps pikcing in the given documentation. You should also be able to access to above with the following path:
http://help.sap.com >> SAP Library
--> SAP ERP Central Component
       --> Logistics
            --> Logistic Execution
                 --> Warehouse Management System
                      --> Goods Issue
                           --> Two Step Picking.
Hope the above helps. If question answered, please close and reward points. Otherwise feel free to get back.

2 step picking in Manufacturing

can some one explain me how two step picking is performed in manufacturing process. what are config we need to do in wm and what are the wm movement types used and what transactios.

Hi,
Is the issue not resolved based on your previous query on the same issue?
creating a group.
What is the issue faced?
Regards,
Vivek

2 Step pick procedure for Transfer Requirement

Hi Gurus,
Can I have 2 step picking process for TR's. For our internal WH movement I wanted to have 2 step picking to optimize physical movement of material. I cant have a delivery for doing this, therefore trying to with Transfer requirement. Is this possible.
thanks
G

You can use two-step picking to pick goods fo:
- deliveries
- production / process orders
in standrad system.
That's all.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/c6/f842674afa11d182b90000e829fbfe/frameset.htm
Regards,
Csaba

2-step picking for production

I have a problem when setting up 2-step picking for production.
The process works like this:
Stage the materials in LP12
Create TR group via LT41
Perform first step via LT0E
Process TR via LB10 to create 2nd step TO
The issue is, that if I go to LB10 before creating the grouping, I can process the TRs directly and get a 1-step picking process. How can I avoid this? Basically LB10 should not show TR items that are relevant for 2-step picking and the 1st step has not been done yet.

Hi ASA,
Not clear if you want two step picking or two step confirmation for the TO (WM removal of material against production order)
Two step picking is used where same material in multiple deliveries required to pick in single movement by clubbing all required quantities in first (picking) TO and later this clubbed quantity gets distributed to all deliveries as per their requirement in second (distribution) TO.
Two step confirmation of TO involve where single TO quantity needs to pick and confirm in two different incidence. As like you mentioned the receiving location is far away from the sending location and stock removal and confirmation should not be done immediately.
Please confirm.
Reg,
Sudhir

2 step picking

I have created number of Outbound delivery and also created a group number for them in tcode Vl060 via WM reference
But after the group step I am not aware of further tcode to complete process ...kind of missing the sequence of steps to complete 2 step picking
however I have given a try with tcode LX39 now here i get 2 option
a) picking
b) allocation
can you please suggest which one should i select first ....i did give a try to both of them but i get error that storage type 007 (pallet one) does not allow negative stock......i am wondering why this message comes since 200 is the storage type where the negative quant should be created ...anyways you guys can guide me thru.

Hi,Sap: IN :
Please check you have enough stock in 007 if the storage type is not allowed the negative stock.
2-step pick follow the below process:
1.The total quantities of materials needed are picked in the first step. Therefore, the removal for the individual requirements (deliveries and transfer requirements) is optimized in the warehouse. Since you can pick full storage units or larger quantities of materials from the storage bins,the total number of picks required is reduced.
2.Two-step picking makes it possible for you to optimize the stock removal by using a picking strategy that is based on quantity (strategy M).
3.Since removal and allocation are completely separate steps, you can also confirm them separately.
4.You can monitor each step of the 2-step picking process at any time in detail.
Dick Hua @ China

LT45 (Picking Progress) and Two Step Confirmation

Dear all,
I have Two Step confirmation in place for one WM movement type and I am happy with it.
We also use Multiple Processing for Deliveries. As a result, the Groups created by this process are used to monitor the Picking Progress in LT45
In LT22 or LT24 there is clear distinction between Open TO's, Confirmed TO's and half Conirmed TO's (yellow triangle.
Much to my disappointment I cannot see such a distinction in LT45.
Is there a way or another Monitor available that does show me the different statusses? A yellow bar if the group is half confirmed is too much to ask, but an alternative would be nice.
Thanks!
Sandeep

Ananthram,
Thanks for reading my Question.
I am talking about TO's that use Two-step Confirmation. In LT22 / LT24 they show as Yellow Triangle, as you know this means half confirmed.
As you know in LL01 they don't show as yellow but as red, just like in LT45. So this is very misleading.
Can you tell me a place where I can clearly monitor my Picking Progress and see a distinction between Green, Yellow and Red
(Confirmed, Half confirmed, Open)
Thanks again for taking the time.
Sandeep

WM - Two step confirmation cancellation

Hi Gurus,
I am using the two step confirmation for transfer order in one of my business process (no 2 step picking).
This is a necessary requirement from my client, but I have a little issue with the cancellation. Once the first step is confirmed, all the cancellation transactions issue the error message #L3355.
Physically, the forklift driver should be able to confirm the first step of picking, and also to cancel this first step. However, there seems not to be a standard transaction to cover this "normal" requirement.
Does anyone has an idea on how this process could be carried out in the system ?
Thanks in advance.
Best Regards,
Remi

If you check the code in...
include: ML03TF90_STORNO_PRUEFEN
form: STORNO_PRUEFEN
...you will see that this is the standard behaviour of the system. SAP online help also says:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f83e744afa11d182b90000e829fbfe/frameset.htm
If a transfer order has already been confirmed, the only way to change a goods movement to restore the original stock situation is to create a new transfer order.
So, in standard system you have to create a new TO or you have to go to development / modification of standard code.
(one )
Edited by: Csaba Szommer on Apr 6, 2011 6:35 PM

I forgot my icloud password and answers to the security questions, only have a primary email and don´t have a resque email, neither pin nor two steps to reset password.

How to get a temporary pin number to my primary email apple ID cause i can not access to my icloud cause i forgot password and answers to the security questions, neither key nor two steps.

You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
(123643)

Two step picking modification

Similar Messages

Maybe you are looking for