Two storage box (3510 and 6140) interface issue...

Hi All,
In my setup we were previously used storage box 3510 but having space issues we are purchasing new storage box of six series 6140. Now, I don't have any clear idea that both the storage can easily mounted on the servers? or there are some interface issues might be?
Can anyone suggest me what are the points(like network, HD and etc.) I have to consider for the compatibility of these storage box?
Thanks...

Hi user505
Now, I don't have any clear idea that both the storage can easily mounted on the servers? or there are some interface issues might be?How many HBA's do your current hosts that are connected to the 3510 have ? are they are single port single card or dual ported card ?.
Depending on how many HBA's you have in your server I would configure up the 6140 with the initiators , map the new volumes straight to the server and then do your copying of data.
In regards to network config etc you'd need to setup the 6140 as per the normal configuration for out of band access , so you can get it via CAM.
Hope that helps
David

Similar Messages

Logic and audio interface issues. help!

Hey guys
I recently bought a small budget recording studio, My first one so bare with the newbie questions and I'm having diffucties with the setup I believe.
I connected my midi keyboard to my computer that had Midi in/out from the keyboard via USB Midi interface to the computer. That was all cool. The computer was seeing it and in Logic was telling me signals were coming into logic.
I then connected my Edirol audio interface ( FA-66 ) 6in/6out. to the computer via Firewire. Midi setup in utlilities sees the device. And that's good right?
I then used stereo jacks to connect the audio interface to my studio monitors. I played a song in itunes music is coming through the speakers, great!
Now off to the problem, finally. The reason I got the audio capture device is so that I can record Vocals and guitars, but the thing is when I connect my Mic and guitar to the device no sound in coming into logic, eventhough I can play the guitar clean through my monitor speakers. Very strange. I see 6 input/output channels in logic so it sees the edirol. So if i set Input 2 in logic and put the guitar in inputjack 2 the signal doesn't get through.
Am I supposed to intertwine the Midi keyboard and audio interface together? If so how is that done? Can anybody help?
Thanks for baring with the newbie!

Don't go beating yourself up... you'll rob the trolls of their only pleasure.
It's like you said: you're new. We were all new once.
Glad you're up and running... let's hear some music.
jord

MGRE in VRF and Source Interface Issue

friends,
I have a scenario where i need to use multiple multi-point GRE tunnels and put them in VRF for each customer. The problem i am facing is that for each Tunnel i use Routers loopback in global table as source address. It works fine for one Tunnel. But as soon as i create another tunnel using the same loopback as source. Both tunnels go down. If i use different loopback addresses for each tunnel, all tunnels stays up. Can anyone tell me why i cannot use one loopback as source-address for all tunnels?? creating indiviual loopback for each tunnel doesn't seem scalable.
interface Tunnel0
ip vrf forwarding RED
ip address 10.0.0.1 255.255.255.0
no ip redirects
ip nhrp map 10.0.0.4 172.16.1.4
ip nhrp map 10.0.0.5 172.16.1.5
ip nhrp network-id 1
tunnel source Loopback0
tunnel mode gre multipoint
end
interface Tunnel1
ip vrf forwarding BLUE
ip address 11.0.0.1 255.255.255.0
no ip redirects
ip nhrp map 11.0.0.6 172.16.1.6
ip nhrp network-id 2
tunnel source Loopback1
tunnel mode gre multipoint
end
interface FastEthernet0/0
description *** Connected to Customers for mGRE ***
ip address 172.16.1.1 255.255.255.0
end
interface Loopback0
ip address 1.1.1.254 255.255.255.255
end

Hello
Can you provide show interface tunnel
Harish

How to add the value of the two text boxes in the 3rd text box in ssrs table?

Hi ,
in my ssrs table i encountered a situation where i need to computing for the two text box values and i have to show that value in page header.
for example i have to add the textbox9 value and textbox12 value then i have to show that value in the page header.
Please help me with this requirement.
Thanks in advance,
Naveen

Hi NaveenMSBI,
According to your description, you want to sum the value of two textboxes, then display it in a page header textbox.
Just PrajapatiNeta said, an expression in a page header or footer can refer to only one report item. So we can create a hidden textbox named textbox20 with the expression below in the report body:
=reportitems!textbox9.Value + reportitems!textbox12.Value
Then use the expression below in a page header textbox:
=reportitems!textbox20.Value
Besides, please note that in a page header or page footer section, only text boxes on the current page are available as a member of the ReportItems collection. For example, if ReportItems!textbox20.Value refers to a text box that only appears on the first
page for a multipage data region, you can see a value only for the first page.
Reference:
ReportItems Collection References (Report Builder and SSRS)
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

MRP to ecxlude storage location stock and read only requirement

Hi All,
Below is the requirement for raw material,
Have two storage locations A and B.
For storage location A, MRP should exclude stock but has to consider demand's at A (dependent requirements, order reservations) and create MRP elements (purchase requisitions, scheduling agreements etc.).
SLOC B has to consider as normal for MRP (should read demand and stock as well).
Please suggest if it is doable, if yes; how to set the storage location A, so that it just read the demands but exclude stock.
Setting up only "SLOC Indicator" 1 in MRP 4 view is not the option I believe.
Thank you.

Can someone please suggest on below requirement,
How to make the settings at material level so that for a storage location 'A', MRP will just read/consider the demand but exclude the stock.
Is it feasible?
Regards,
Deepak Girme

Required Check Boxes - Yes and No

Good Morning everyone - I have a form and I have two Check boxes Yes and NO that the user needs to check one, but if the user checks one the other should be turned off (sort of speaking) and allow the user to continue to submit or print, etc. Is this possible. Thank you kindly.

In Acrobat Forms, you need to group the check boxes or radio buttons by using the same name for the buttons and setting the export value to different values so the individual box/button widget. can differentiated from the other boxes/buttons. Use the Radio Buttons if with a default value if you want a froced selection. Check boxes allow for the deselection of a selected check box, but radio buttons can only deselected by selecting another radio button.

Why is it when i update my status on facebook from iohone it splits the updates into two differents boxes with some funky symbol. I have uninstall facebook and installed it over and it still does it. only the facebook IPHONE app.

why is it when i update my status on facebook from iphone it splits the updates into two differents boxes with some funky symbols at the beginning.. I have uninstall facebook and installed it over and it still does it. only the facebook IPHONE app where it says to update staus text to FBOOK i have already update my phone too.
if i go on the facebook site and update there through a brower on iphone it will work fine just cant us IPHONE mobile upload, . But its a pain of not using my IPHONE APP for facebook cause it does that.

The warranty entitles you to complimentary phone support for the first 90 days of ownership.

I have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3

i have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3.
the problem is best explained on the following one - page thread:
https://discussions.apple.com/thread/3951518?start=0&tstart=0
(Clearly i'm not alone in this problem, although i think i figured out what's going wrong a little more than he did...read on!)
his solution, to put mainstage in jump mode, is very unsatisfactory to me, as it bounces all of a sudden to drastically different settings.
basically, my analysis is that my controller is NOT receiving MIDI date from mainstage. in other words, mainstage knows what my controller is doing, but my controller doens't know what mainstage is doing.
let's say i turn the knob all the way to the right ... 127...and the virtual fader goes to the right like it's supposed to.
now...next...let's say i change to a different patch, where that same VIRTUAL fader is not at the max clockwise position..maybe it's only at 1pm. now when i turn the physical knob to the RIGHT, the midi data is still at 127 on the controller! it didn't "reset" to sync up with the new level (say 80 or so) setting on the new patch. so i can't increase that new setting of 80 by continuing to turn the knob to the right. i have to turn it all the way to zero,...and then continue PAST zero until the controller thinks that IT is at 0...at that point the controller and mainstage are in agreement, and things work fine....so bascially, the keyboard thinks the level is at max...but mainstage thinks the level is at 1pm.
i am using Logic 9, and i have a macbook pro 2.9 Ghz I7 with 8 gigs of memory and OS X 10.8.4

Hi Josh,
Thanks for taking the time to contact us here a Novation for technical support. Lets continue to correspond via email so we can get your issue resolved.
Thanks.
Mike Towns

I have a 10.2.8 os. I had opened up the AOL logo on the bottom bar. Two aol boxes came up. I can get them to go away for a short time and then they come back. I have not used AOL for 6 years. How can I get the boxes to go away?

I have a 10.2.8 os on a G4 desktop. A week ago I clicked on the AOL icon in the bottom bar. I have not used AOL for six years. Two aol boxes came up. I can not get the boxes to go away for long. They may go away for 15 minutes and they come back while I am working. How can I get these aol boxes to go away?
I will be upgading to Tiger; 10.4.

Right click on the AOL icon and select move to trash.

Popup screen with two check box and a text area for the user to enter value

hi,
i have a requirement when a button is clicked a popup screen should appear with two check box and a text box where the user can enter a value.
is there any function module which has that functionality

Hello,
You can create a new screen and select the screen type as model dialog box.This will give you a pop-up screen and you can call this model dialog box screen in the PAI of the screen where the button is present.(At user-command).
case ok_code.
when 'BUTTON'.
call screen 200 starting at 10 10.
You can design the PBO of this pop-up screen as per your needs.
Regards,
Beejal
**Reward if this helps.

Drag and Drop between two list boxes

Hi all
I am working over Drag and Drop .. i have to implement Drag and Drop between two list boxes .. both list box exist in same page ..each list box have number of rows.. please give me some idea ... as i am new for JSP and Servlet...
Thanks in advance
Regards
Vaibhav

Hi all
I am working over Drag and Drop .. i have to
implement Drag and Drop between two list boxes ..
both list box exist in same page ..each list box have
number of rows.. please give me some idea ... as i am
new for JSP and Servlet...
Something close to what you are looking for is Select Mover in Coldtags suite:
http://www.servletsuite.com/jsp.htm

I have a iphone 4s, it died and has been on the charger for the last two days and still wont turn on. How can i fix this???? condition of phone is not the best and was having issues staying charged to begin with but never NOT came back on.

I have a iphone 4s, it died and has been on the charger for the last two days and still wont turn on. How can i fix this???? condition of phone is not the best and was having issues staying charged to begin with but never NOT came back on. I've tried the holding of the home and power button but still nothing

iOS: Not responding or does not turn on - Apple Support
try this but maybe terminal if no result

Two FIOS boxes in the same room, remote issues

I have two cable boxes in my living room to enjoy the football season. my only problem is that all fios boxes have the saem remote settings.
Does any one know a way to get the two boxes working separately for under 100 bucks?

I really doubt that the original poster is monitoring this discussion any more, so I will answer your question. Yes you can have as many boxes as there are inputs on the TV. Each box can output in most of the input formats of any TV. Rf output is not available on some units. For example, my rec room TV has 2 HDMI, 1 component, and 3 composite video inputs. I could have 6 boxes attached, at least. One more, if I had a cable box with an RF output.
Now my question: Why would you do that?
I once used two DVRs on one TV because I wanted to record more than 2 channels at once and have them available to that TV. If all you want is a way to swap channels quickly, buy a remote with programmable macro buttons and program them to the channels you will be watching. you can buy such a remote for under $20. Or if you only need two channels, just use the Back button with one STB to toggle back and forth.

I have two e-mail addresses and on the left hand side in mail if i expand the sent box one account has an exclamation mark appeared and some mail has deleted it's self??

I have two e-mail addresses and on the left hand side in mail if i expand the sent box one account has an exclamation mark appeared and some mail has deleted it's self??

You can continue to use them as Apple ID's, change the rescue address (as you know)
You can use your iCloud address, but it won't be an alias, it's a full email address.

On my iPhone 4, I cannot get the "not enough storage on iCloud" message to close. Therefore, I can't get past this box/screen AND I can't turn the device off. Please help.

On my iPhone 4, I cannot get the "not enough storage on iCloud" message to close. Therefore, I can't get past this box/screen AND I can't turn the device off. Please help.

Try resetting it by holding the power and home buttons at the same time until you see the Apple logo, then releasing. You won't lose any data by doing this.

Two storage box (3510 and 6140) interface issue...

Similar Messages

Maybe you are looking for