Two structures on same axis in query designer

Hi,
I developed a query with two structures column axis in Bex query designer (in BI 7)
when I open this query in report designer is showing this error
" T<b>he Report Designer does not support this query drill down. Column axis may contain one structure only: remove any additional dimensions</b> "
Can you please help me on this issue.

Hi Ram,
sorry for the late reply, had a weekend break.
If a query (or query view) contain two structures and also one or
more characteristics then a dynamic section will be used. The dynamic
section will generate individual cells for each intersection of the two
structures, this means you will be able to re-position those cells freely.
<b>Also you cannot use a query or query view which contains more than one
structure in the columns.</b>
and you are having two structures in your columns, that is the reason you are getting the error message. It doesn't matter even if your query runs fine in WAD and Query designer, but your structure placements doesn't satisfy the Report Desinger specs.
Hope it helps,
Venkat
*thanks = points in SDN

Similar Messages

How to achieve Structures in InfoProvider area in Query Designer?

Hi,
How to achieve Structures in InfoProvider area in Query Designer? When I was observing some standard Queries, I observed Structure( With KF and Without KF ) along with KeyFigures & Dimensions in Infoprovider area. I was wondered about , how it was possible? Can anyone clarify regarding this issue? I am suppose to creta some queries for HR reorts........
Regards,
Suman

Hi Suman,
Structures are two types, one is local and other is Global.
Structures that you have seen at Infoprovider level are Global, those we can use for any query developed on Infoprovider.
Local structures cannot be used for other queries, those are local to that query only.
Structures we can define at Rows and Column levels. We can define for Characteristics and Keyfigures also.
To define a strucure, Right click on Rows/Columns area and say New Structure and add the fields you required so that query is defined as Local, If we want to make that strucure as Global-- then Right click on the Strucure and say Save as and Save it with proper description and technical name, then that structure will become Global Structure and it appears in the Infoprovider level.
Remember we can a maximum of Two Strucures for a Query, there is no limitatiion to define the number of Global structures at Infoprovider level.
Hope this helps.
Veerendra.

How to restrict for same char in Query designer

Hi Experts,
We have a requirement where we have to display the TRansfer amount
Where transfer from contract and transfer to contract
Sould not be equal.
Is there any way by which in query designer we can put condition on Chars.
Please suggest.
Thanks
Mayank

Hi,
As much I understood, you may create a replacement path variable on CHAR and convert the same in number/Key Figure.
You may put condition on this.
I hope it will help.
Thanks,
S

Drill down in query when structure is in use (in query designer)

Hi Guys,
I have a structure in a report. This report was created with a characteristics structure.
Now I have a problem like this for example:
Three company codes 1000, 1100.
Turn over 100000.
Now the report shows only the turn over for all company codes.
Company codes 100000
I thought the navigation / drill down for company codes will be automatically available.
I expected
Company code 1000 80000
Company code 1100 20000
Result 100000
Is there something what should be activated extra?
I a hierarchy mandatory for structures?
Edited by: saplaz on May 23, 2011 3:22 PM

Hi,
Either make use of hierarchy or make use of selection in structure.
create selections for all the compay code which you want to display in your query output.
Like make a new selection inside that drag and drop company code and select the value after that restrict it whith your desired key figure.
By following the above steps you will get the repective turnover of comapny codes against each other.
Hope it helps.
Regards,
AL

Missing data fields in Query designer

Hi Guys,
A query exists on an ODS. There are few characteristics and navigational attributes in the ODS. In Query designer, on the left hand side under Dimensions,
i can see 'Data part' (for Data fields of ODS) and 'Key section' (for Key fields of ODS).
All but 2 fields (One data field and one navigational attribute of the ODS) are seen under 'Dart part' of the query designer.
Data field - Accounting Document number
Navigational attribute - Actual Acquisition Fiscal Year
What may the reason for those 2 fields not appearing.
Any help is greatly appreciated.

Hi,
I executed a query on the ODS using LISTCUBE. To my surprise, i can find both 0AC_DOC_NO and ZACQ_YR here. If i can find both these in LISTCUBE, why don't i find the same in the query designer. Even though i built a new query on the ODS in the query designer, i still can't find them in the query designer.
Thanks

Error when opening Query Designer

I keep getting an error when I open up query designer and hit on open query. the error is bexopensaveservices -get nodes:RFC exception. any ideas on how to fix? Basis says my RFC connections are fine

Hi,
We are facing the same issue for Query Designer .When opening a query, we get the following error :"Terminate:Unexpected Error:BExOpenSaveServices - GetNodes:RFC Exception".
As usual, Basis folks say, RFC connections are fine.
Not sure of the main problem.Can any one tell me , whats the solution for the same.
FYI, I have SAP_ALL authorizations and I think, for my user id , authorization is not a problem.
Regards,
Kumar

How to create two structures in query designer?

Hi experts,
I got the requirement to create 2 structures in query designer , as far as i concern i got to know that there will be chance to create on one for char and other for key figure,
is their any chance to create 2 structures on key figures.
If possible please help me in that.
Thanks in Advance
vas

Hi,
in Query at a time only 2 structures can be used, even thought there are many structures created on that infoprovider.
[http://help.sap.com/erp2005_ehp_03/helpdata/EN/4d/e2bebb41da1d42917100471b364efa/content.htm]

Two Structure Query with APD

I am using a query which has two structures within APD and got an error during activation.
I found OSS note 751577 which explains the workaround for queries with two structures, even though I added additional columns as suggested in the note I am still getting the error message during activation.
Let me know if anyone was able to get queries with two structure working with APD.
Thanks!
-Deepu

Hi Thomas,
I have a query with 2 structures. Note 751577,
The Analysis Process Designer supports only queries with one structure, the structure for key figures.
Check whether your query includes two structures.
If it does, the following workaround is available: Multiply the number of rows by the number of columns.
If a query has four rows and five columns, you must create twenty columns, for example, to make a permitted query available.
I tried this workaround as mentioned but still end up getting the same error msg.
Could you please help me?
Regard,
Rohit
Edited by: rohitmulay on Mar 31, 2011 7:00 AM

Problem with Queries Structures in Bex Query Designer and Universe Designer

Hi everyone,
I have a problem when i try to do a Universe from a Bex Query Designer.
When I use a Characteristic Restrictions in a Structure, the universe only show me the structure without the objects inside it.
EJ:
1) Bex Query Designer
Colunms
(Structure) ZSRT_123
                      - (Characteristic Restrictions) Reg Guayana
>          (InfoObject)     0Product = 'XXX'
>          (InfoObject)     0Country = 'YYY'
     - (Characteristic Restrictions) Reg Caracas
>          (InfoObject)     0Product = 'AAA'
>          (InfoObject)     0Country = 'BBB'
Rows
(Structure) ZSRT_456
               (Key Figure)     Net Sales
2) Universe designer
(Class) ZSRT_456
>(Measure)      Net Sale
(Class)     ZSRT_123
>(Dimension)      ZSRT_123
The universe dont translate the two Characteristic Restrictions in the structure ZSRT_123.
Any information would be much appreciated. Thank you.

Hi,
I assume that you are using BOE XI 3.1 SP2.
We have added an option in SP2 to generate or not the L00 level.
Unfortunately this option applies not only on characteristics but also on hierarchies, hierarchies variables and structures: that's the reason why you have no elements belonging to the structure generated.
I recommend to always generate L00 in order to have your structure generated correctly.
This issue will be fixed in SP3.
Regards,
Didier

Report Designer with two Structure in Column

Hi Experts,
Is not possible a Report Designer use a query with 2 structure in column ?
If i need use two structure in the column, exist a workaround for this case ?
Tks and best regads ...
Alex

Unfortunately not.
You may try to work around to have set of virtual chars and key figures; but resposne time will not be encouraging.
Ravi Thotahdri

How can i reuse a structure in the query designer in 3.5

Hi all,
we are using the version BW 3.5, now how can i reuse a structure made int he query designer, because i need it in another query, i did the structure and put it a technical name and save, help guys

HI Richard,
Create a Structure in Rows/columns and save As it, then in the left Panel of the Query Designer you can see three Folders
1) Structures
2) Keyfigures
3) Dimensions
then Expand the structures Folder, there you can find your saved structure, Structures are 2 types
1) With Key figures
2) Without Key Figures
If you have the key figures in your saved structure, then you can find it in the subfolder of with Keyfigures, else in the other folder.
Now you can use this structure by draging in all the queries which are on the same InfoProvider (CUbe. MultiProvider)
Regards
ReddY A

Netweaver 04s - Use of two structures in the query craeted dump

I have used two structures in a query, The same query works fine in current BW 3.5 system but in BI 7.O sandbox (copy of prod), it dumps out.
When I check the query, it does give these message (same as in PROD, where it runs without a problem).
- Different hierarchies are used for characteristic Cons Group
- Number variable ZFV_HTES cannot be replaced.
- Fiscal year variant is to be specified for key figure Cumulative (YTD) Value in Group Currency

Hi Rakesh.
Did you get a satisfactory outcome to this problem? Does the current patch of Netweaver 04S cover it?
Would appreciate your reply, please.
Patrick

Incorrect query result with Top N condition and two structures

Hi,
I have created a query on a FI-GL infocube with the characteristic 0BUS_AREA in rows and two structures in columns. The first structure has two items / selections (each item is a selection of several GL accounts). The second structure has two items (the first one contains the key figure 0BALANCE for the current period and the second item is a formula that calculates the absolute value of the first item. The first item is hidden). The (simplified) result looks like this (sorry, not very pretty!):
Business Area Clients Clients fae
Business Area1 10 15
Business Area2 20 7
Business Area 3 15 8
Overall result 45 30
I then added one condition using the Top N operator. The condition is defined for all the elements of the structures. When I execute the query, I sometimes obtained an incorrect number of Top N records selected. The problem seems to occur when N is greater than the number of available Business Areas for an element of the structure.
For example, if N = 8 and data only exists for 5 Business Areas for the structure element Clients, I may end up with 10 Business Areas for the second structure element Clients fae when I only expect 9 (i.e. the top 8 Clients fae + 1 of the Top 8 Clients for which there is no data under Clients fae).
Has anybody encoutered that kind of problem ?
Many thanks.
François.

Pascal,this is a known behavior with conditions.When you apply condition it just hide the extra rows and it does not impact the result row.So your result row actually shows the value irrespective of the condition you apply.
Now with the help of local functions like calculate result as summation you can show the correct sum after applying the condition but when you try to use that result in some calculation then it takes the original value thereby discarding the calculated value.
Same is happening in your case as well.Its taking the original value i.e 350 and not the calculated sum after condition i.e 270.
Hope this helps.
Regards,
AL

Structure copy in BEx query Designer?

I created structure in BEx Query Designer in BI PRD which is our BI production system.
I'd like to copy structure to BI DEV which is our BI development system.
Is is possible?
If you have any solution, tell me about that.
Thanks.

Hi
If you want the object which is there in PRD to DEV system means, the only way is to do transportation. but to do reverse transportation, you should have STMS connection from your PRD to DEV system.
The better way is to create the structure again in DEV system.
If you want to go with reverse transportation, consult your basis person.
Regards,
Venkatesh

Combine two reports in query designer using key figure with sap exit

Hi experts,
i want to combine two reports in query designer using key figure with sap exit
in the report 1 key figure calculation based on the open on key date(0P_DATE_OPEN)
to calculate due and not due in two columns
in report 2 key figure calculate in the time zones using given in variable Grid Width (0DPM_BV0) like due in 1 to 30 days, 31 to 60 days...the due amount based on the open on key date(0P_DATE_OPEN)
to calculate in 1-30, 31-60, 61-90, 91-120, 121-150 and >150 days in 6 columns
now i have requirement like this
not due, 1-30, 31-60, >60, due,1-30, 31-60, >60 in 8 columns
or
not due, due, 1-30, 31-60, 61-90, 91-120, 121-150 and >150 in 8 col
thank you

Hi Dirk,
you perhaps know my requirement,
for the management to make used in one report,
we have in reporting finacials Ehp3.
Vendor Due Date Analysis - which show due, not due
Vendor Overdue Analysis - show only due and analysis in time grid frame
i want to combine in one report that show NOT DUE, DUE, DUE time frames in grid.
krish...

Two structures on same axis in query designer

Similar Messages

Maybe you are looking for