Two table views in single screen
Hi,
are we able to put two Table views in one UI window?
My requirement is if i click on one cell on 1st table view then 2nd table view cell's in the same UI window has to be updated with required values.
is that possible?
Please let me know the solution if anyone know.
Thanks in advance.
Just go to interface builder and drop two table views in.
Presto! You're done.
Similar Messages
-
How to show multiple dynamic tables on a single screen?
right now im displaying alv for singlr attribute of dimension.
eg for dimension PRODUCT attribute PROFITCENTER im displaying in alv when user executes it.
but the requirement is that multiple attributes can be there so multiple tables is to be displayed on a single screen.
User basically wants to see data of all attributes. if there are 10 attributes hee wants to see 10 tables as every attribute has a different table.
what i have achieved is below in snapshots. only one attribute table PRODUCT im able to display. since i believe multiple headers cant be displyed in alv so even if i display multiple dynamically populated tables on a single screen then it will be fine.
i have also ADDED my code below: ZMDREPORT
this report is for SAP BPC.
*& Report ZMDREPORT
REPORT zmdreport.
TABLES /1cpmb/bfrdp3rp.
DATA: gw_datatbl TYPE tabname,
gw_datatbl1 TYPE tabname,
gw_descrptbl TYPE tabname,
gw_attribute TYPE tabname.
DATA:
BEGIN OF gw_attr,
appset_id TYPE uja_dim_attr-appset_id,
dimension TYPE uja_dim_attr-dimension,
tech_name TYPE uja_dim_attr-tech_name,
attribute_name TYPE uja_dim_attr-attribute_name,
caption TYPE uja_dim_attr-caption,
END OF gw_attr,
gt_attr LIKE TABLE OF gw_attr.
DATA: gt_slis_fcat1 TYPE slis_t_fieldcat_alv,
gw_slis_fcat1 LIKE LINE OF gt_slis_fcat1.
DATA : gt_except TYPE TABLE OF zbpcbt007,
gw_except LIKE LINE OF gt_except,
gt_except_t TYPE TABLE OF zbpcbt007,
gt_attrib TYPE TABLE OF tabname,
gw_attrib LIKE LINE OF gt_attrib.
DATA: gr_r_ref TYPE REF TO data.
DATA:BEGIN OF gw_mdr,
appset_id TYPE uj_appset_id,
dimension TYPE uj_dim_name,
reasoncd TYPE zmdreason,
refdimension TYPE uj_dim_name,
attrib TYPE uj_attr_name,
END OF gw_mdr,
gt_mdr1 LIKE TABLE OF gw_mdr,
gt_mdr2 LIKE TABLE OF gw_mdr,
gt_mdtable1 TYPE zbpctt_attr,
gt_mdtable2 TYPE zbpctt_attr,
gw_mdtable2 LIKE LINE OF gt_mdtable2,
gt_mdtable3 TYPE zbpctt_attr,
gt_mdtable4 TYPE zbpctt_attr,
gw_mdtable4 LIKE LINE OF gt_mdtable4,
BEGIN OF gw_finalattr,
dim(32) TYPE c,
END OF gw_finalattr,
gt_finalattr LIKE TABLE OF gw_finalattr,
gt_tab1 LIKE TABLE OF gw_finalattr,
gw_tab1 LIKE LINE OF gt_tab1,
gt_tab2 LIKE TABLE OF gw_finalattr,
gw_tab2 LIKE LINE OF gt_tab2.
FIELD-SYMBOLS: <gfs_tab1> TYPE STANDARD TABLE.
FIELD-SYMBOLS: <gfs_tab2> TYPE STANDARD TABLE,
<gfs_tab3> TYPE STANDARD TABLE,
<gfs_tab4> TYPE STANDARD TABLE.
FIELD-SYMBOLS:<gfs_attr> TYPE any,
<gfs_field3> TYPE any,
<gfs_field4> TYPE any.
DATA: gw_sortcond TYPE string.
FIELD-SYMBOLS: <gfs_t_final> TYPE STANDARD TABLE.
FIELD-SYMBOLS: <gfs_final> TYPE any.
FIELD-SYMBOLS: <gfs_data> TYPE any .
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_env TYPE uja_dimension-appset_id OBLIGATORY.
PARAMETERS: p_dim TYPE uja_dimension-dimension OBLIGATORY.
SELECT-OPTIONS: s_member FOR /1cpmb/bfrdp3rp-mbr_name .
PARAMETERS: p_hir TYPE /1cpmb/bfrdp3rp-/cpmb/hir.
PARAMETERS:p_attr TYPE uj_attr_name MODIF ID m1.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS: p_radio1 RADIOBUTTON GROUP g1 USER-COMMAND abc DEFAULT 'X',
p_radio2 RADIOBUTTON GROUP g1.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETERS: p_reason TYPE zbpcbt007-reasoncd MODIF ID m1.
SELECTION-SCREEN END OF BLOCK b3.
*********************************************************************alv
DATA :gt_fcat TYPE lvc_t_fcat.
DATA: gw_ok_code TYPE sy-ucomm,
gw_okcode TYPE sy-ucomm.
DATA: go_custom_container TYPE REF TO cl_gui_custom_container,
gw_g_container TYPE scrfname VALUE 'CC1',
go_grid1 TYPE REF TO cl_gui_alv_grid.
DATA:BEGIN OF gw_table,
dimension TYPE uja_dimension-dimension,
END OF gw_table,
gt_tab LIKE TABLE OF gw_table ,
BEGIN OF gw_member,
mbr_name TYPE uj_dim_member,
END OF gw_member ,
gt_member LIKE TABLE OF gw_member,
BEGIN OF gw_hir ,
hir TYPE /1cpmb/bfrdp3rp-/cpmb/hir,
END OF gw_hir,
gt_hir LIKE TABLE OF gw_hir.
DATA:gt_slis_fcat2 TYPE slis_t_fieldcat_alv,
gw_slis_fcat2 LIKE LINE OF gt_slis_fcat2 .
DATA: lr_data TYPE REF TO data.
DATA :gt_fcat1 TYPE lvc_t_fcat,
gt_fcat2 TYPE lvc_t_fcat,
gt_fcat3 TYPE lvc_t_fcat,
gt_fcat2_t TYPE lvc_t_fcat,
gw_fcat LIKE LINE OF gt_fcat2,
gw_fcat3 LIKE LINE OF gt_fcat3.
DATA: gt_fcat3_t LIKE gt_fcat3.
DATA: gw_desc TYPE uj_desc.
DATA : gw_string TYPE string,
gw_str TYPE string.
DATA: gw_len TYPE string,
BEGIN OF gw_refdim,
dimension TYPE uja_dimension-dimension,
END OF gw_refdim,
gt_refdim LIKE TABLE OF gw_refdim,
gt_refdim_t LIKE TABLE OF gw_refdim,
BEGIN OF gw_refdata,
data_table TYPE tabname,
desc_table TYPE tabname,
END OF gw_refdata,
gt_refdata LIKE TABLE OF gw_refdata,
BEGIN OF gw_techattr,
tech_name TYPE uja_dim_attr-tech_name,
END OF gw_techattr,
gt_techattr LIKE TABLE OF gw_techattr,
gw_cond TYPE string.
DATA:gw_hircond TYPE string.
DATA: gt_dynpread TYPE TABLE OF dynpread,
gw_dynpread LIKE LINE OF gt_dynpread,
gw_dynpread2 LIKE LINE OF gt_dynpread,
gw_dim TYPE string,
gw_env TYPE string.
FIELD-SYMBOLS: <gfs_w_tab1> TYPE any,
<gfs_w_tab2> TYPE any,
<gfs_w_tab3> TYPE any,
<gfs_field> TYPE any,
<gfs_field2> TYPE any,
<gfs_field_final> TYPE any,
<gfs_s_fcat> TYPE lvc_s_fcat,
<gfs_s_fcat2> TYPE lvc_s_fcat,
<gfs_s_fcat3> TYPE lvc_s_fcat
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_dim.
REFRESH gt_dynpread.
gw_dynpread-fieldname = 'P_ENV'.
APPEND gw_dynpread TO gt_dynpread.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
* TRANSLATE_TO_UPPER = ' '
* REQUEST = ' '
* PERFORM_CONVERSION_EXITS = ' '
* PERFORM_INPUT_CONVERSION = ' '
* DETERMINE_LOOP_INDEX = ' '
* START_SEARCH_IN_CURRENT_SCREEN = 'X'
* start_search_in_main_screen = ' '
* START_SEARCH_IN_STACKED_SCREEN = ' '
* START_SEARCH_ON_SCR_STACKPOS = ' '
* SEARCH_OWN_SUBSCREENS_FIRST = ' '
* SEARCHPATH_OF_SUBSCREEN_AREAS = ' '
TABLES
dynpfields = gt_dynpread
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
READ TABLE gt_dynpread INTO gw_dynpread INDEX 1.
IF sy-subrc EQ 0.
TRY .
REFRESH gt_tab.
SELECT dimension
FROM uja_dimension CLIENT SPECIFIED
INTO TABLE gt_tab
WHERE mandt EQ sy-mandt
AND appset_id EQ gw_dynpread-fieldvalue.
IF sy-subrc EQ 0.
SORT gt_tab BY dimension.
DELETE ADJACENT DUPLICATES FROM gt_tab COMPARING dimension.
IF gt_tab IS NOT INITIAL.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST' "#EC CI_SUBRC
EXPORTING
* DDIC_STRUCTURE = ''
retfield = 'DIMENSION'
* PVALKEY = ' '
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = 'P_DIM'(004)
* STEPL = 0
* WINDOW_TITLE =
* VALUE = ' '
value_org = 'S'
* MULTIPLE_CHOICE = ' '
* display = ''
* CALLBACK_PROGRAM = ' '
* CALLBACK_FORM = ' '
* CALLBACK_METHOD =
* MARK_TAB =
* IMPORTING
* USER_RESET =
TABLES
value_tab = gt_tab
* FIELD_TAB =
* RETURN_TAB =
* DYNPFLD_MAPPING =
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3
IF sy-subrc NE 0.
ENDIF.
ENDIF.
ENDIF.
CATCH cx_root.
ENDTRY.
ENDIF.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_member-low.
REFRESH gt_dynpread.
gw_dynpread-fieldname = 'P_ENV'.
APPEND gw_dynpread TO gt_dynpread.
gw_dynpread-fieldname = 'P_DIM'.
APPEND gw_dynpread TO gt_dynpread.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
* TRANSLATE_TO_UPPER = ' '
* REQUEST = ' '
* PERFORM_CONVERSION_EXITS = ' '
* PERFORM_INPUT_CONVERSION = ' '
* DETERMINE_LOOP_INDEX = ' '
* START_SEARCH_IN_CURRENT_SCREEN = 'X'
* start_search_in_main_screen = ' '
* START_SEARCH_IN_STACKED_SCREEN = ' '
* START_SEARCH_ON_SCR_STACKPOS = ' '
* SEARCH_OWN_SUBSCREENS_FIRST = ' '
* SEARCHPATH_OF_SUBSCREEN_AREAS = ' '
TABLES
dynpfields = gt_dynpread
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
SORT gt_dynpread BY fieldname.
DELETE ADJACENT DUPLICATES FROM gt_dynpread COMPARING fieldname.
IF gt_dynpread IS NOT INITIAL.
LOOP AT gt_dynpread INTO gw_dynpread.
IF gw_dynpread-fieldname EQ 'P_ENV'.
gw_env = gw_dynpread-fieldvalue.
ELSEIF gw_dynpread-fieldname EQ 'P_DIM'.
gw_dim = gw_dynpread-fieldvalue.
ENDIF.
ENDLOOP.
IF sy-subrc EQ 0.
CLEAR: gw_datatbl1, gt_member.
SELECT SINGLE data_table
INTO (gw_datatbl1)
FROM uja_dimension CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND appset_id EQ gw_env
AND dimension EQ gw_dim.
IF sy-subrc EQ 0.
TRY .
REFRESH gt_member.
SELECT mbr_name
INTO TABLE gt_member
FROM (gw_datatbl1) CLIENT SPECIFIED
WHERE mandt EQ sy-mandt .
IF sy-subrc EQ 0.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
* DDIC_STRUCTURE = ' '
retfield = 'MBR_NAME'
* PVALKEY = ' '
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = 'S_MEMBER'
* STEPL = 0
* WINDOW_TITLE =
* VALUE = ' '
value_org = 'S'
* MULTIPLE_CHOICE = ' '
* DISPLAY = ' '
callback_program = sy-repid
callback_form = 'F4CALLBACK'
* CALLBACK_METHOD =
* MARK_TAB =
* IMPORTING
* USER_RESET =
TABLES
value_tab = gt_member
* FIELD_TAB =
* RETURN_TAB =
* DYNPFLD_MAPPING =
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3
IF sy-subrc <> 0.
* Implement suitable error handling here
ENDIF.
ENDIF.
CATCH cx_root.
ENDTRY.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_member-high.
REFRESH gt_dynpread.
gw_dynpread-fieldname = 'P_ENV'.
APPEND gw_dynpread TO gt_dynpread.
gw_dynpread-fieldname = 'P_DIM'.
APPEND gw_dynpread TO gt_dynpread.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
* TRANSLATE_TO_UPPER = ' '
* REQUEST = ' '
* PERFORM_CONVERSION_EXITS = ' '
* PERFORM_INPUT_CONVERSION = ' '
* DETERMINE_LOOP_INDEX = ' '
* START_SEARCH_IN_CURRENT_SCREEN = 'X'
* start_search_in_main_screen = ' '
* START_SEARCH_IN_STACKED_SCREEN = ' '
* START_SEARCH_ON_SCR_STACKPOS = ' '
* SEARCH_OWN_SUBSCREENS_FIRST = ' '
* SEARCHPATH_OF_SUBSCREEN_AREAS = ' '
TABLES
dynpfields = gt_dynpread
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
SORT gt_dynpread BY fieldname.
DELETE ADJACENT DUPLICATES FROM gt_dynpread COMPARING fieldname.
IF gt_dynpread IS NOT INITIAL.
LOOP AT gt_dynpread INTO gw_dynpread.
IF gw_dynpread-fieldname EQ 'P_ENV'.
gw_env = gw_dynpread-fieldvalue.
ELSEIF gw_dynpread-fieldname EQ 'P_DIM'.
gw_dim = gw_dynpread-fieldvalue.
ENDIF.
ENDLOOP.
IF sy-subrc EQ 0.
CLEAR: gw_datatbl1.
SELECT SINGLE data_table
INTO (gw_datatbl1)
FROM uja_dimension CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND appset_id EQ gw_env
AND dimension EQ gw_dim.
IF sy-subrc EQ 0.
TRY .
REFRESH gt_member.
SELECT mbr_name
INTO TABLE gt_member
FROM (gw_datatbl1) CLIENT SPECIFIED
WHERE mandt EQ sy-mandt.
IF sy-subrc EQ 0.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
* DDIC_STRUCTURE = ' '
retfield = 'MBR_NAME'
* PVALKEY = ' '
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = 'S_MEMBER'
* STEPL = 0
* WINDOW_TITLE =
* VALUE = ' '
value_org = 'S'
* MULTIPLE_CHOICE = ' '
* DISPLAY = ' '
callback_program = sy-repid
callback_form = 'F4CALLBACK'
* CALLBACK_METHOD =
* MARK_TAB =
* IMPORTING
* USER_RESET =
TABLES
value_tab = gt_member
* FIELD_TAB =
* RETURN_TAB =
* DYNPFLD_MAPPING =
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3
IF sy-subrc <> 0.
* Implement suitable error handling here
ENDIF.
ENDIF.
CATCH cx_root.
ENDTRY.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
*& Form F4CALLBACK
* text
* -->RECORD_TAB text
* -->SHLP text
* -->CALLCONTROL text
FORM f4callback TABLES record_tab STRUCTURE seahlpres
CHANGING shlp TYPE shlp_descr
callcontrol TYPE ddshf4ctrl.
callcontrol-no_maxdisp = ''.
ENDFORM. "F4CALLBACK
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_hir.
REFRESH gt_dynpread.
CLEAR gw_dynpread.
gw_dynpread-fieldname = 'P_ENV'.
APPEND gw_dynpread TO gt_dynpread.
gw_dynpread-fieldname = 'P_DIM'.
APPEND gw_dynpread TO gt_dynpread.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
* TRANSLATE_TO_UPPER = ' '
* REQUEST = ' '
* PERFORM_CONVERSION_EXITS = ' '
* PERFORM_INPUT_CONVERSION = ' '
* DETERMINE_LOOP_INDEX = ' '
* START_SEARCH_IN_CURRENT_SCREEN = 'X'
* start_search_in_main_screen = ' '
* START_SEARCH_IN_STACKED_SCREEN = ' '
* START_SEARCH_ON_SCR_STACKPOS = ' '
* SEARCH_OWN_SUBSCREENS_FIRST = ' '
* SEARCHPATH_OF_SUBSCREEN_AREAS = ' '
TABLES
dynpfields = gt_dynpread
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
SORT gt_dynpread BY fieldname.
DELETE ADJACENT DUPLICATES FROM gt_dynpread COMPARING fieldname.
LOOP AT gt_dynpread INTO gw_dynpread.
IF gw_dynpread-fieldname EQ 'P_ENV'.
gw_env = gw_dynpread-fieldvalue.
ELSEIF gw_dynpread-fieldname EQ 'P_DIM'.
gw_dim = gw_dynpread-fieldvalue.
ENDIF.
ENDLOOP.
IF sy-subrc EQ 0.
CLEAR: gw_datatbl1.
SELECT SINGLE data_table
INTO (gw_datatbl1)
FROM uja_dimension CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND appset_id EQ gw_env
AND dimension EQ gw_dim.
IF sy-subrc EQ 0.
REFRESH gt_member.
TRY .
SELECT /cpmb/hir
INTO TABLE gt_hir
FROM (gw_datatbl1) CLIENT SPECIFIED
WHERE mandt EQ sy-mandt.
IF sy-subrc EQ 0.
SORT gt_hir BY hir.
DELETE ADJACENT DUPLICATES FROM gt_hir COMPARING hir.
IF gt_hir IS NOT INITIAL.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
* DDIC_STRUCTURE = ' '
retfield = '/CPMB/HIR'
* PVALKEY = ' '
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = 'P_HIR'
* STEPL = 0
* WINDOW_TITLE =
* VALUE = ' '
value_org = 'S'
* MULTIPLE_CHOICE = ' '
* DISPLAY = ' '
* CALLBACK_PROGRAM = ' '
* CALLBACK_FORM = ' '
* CALLBACK_METHOD =
* MARK_TAB =
* IMPORTING
* USER_RESET =
TABLES
value_tab = gt_hir
* FIELD_TAB =
* RETURN_TAB =
* DYNPFLD_MAPPING =
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3
IF sy-subrc <> 0.
* Implement suitable error handling here
ENDIF.
ENDIF.
ENDIF.
CATCH cx_root.
ENDTRY.
ENDIF.
ENDIF.
ENDIF.
* CLASS lcl_main DEFINITION
CLASS lcl_main DEFINITION.
PUBLIC SECTION.
CLASS-METHODS:
create_alv1,
create_alv2,
create_alv3,
create_fieldcatalog,
create_dynamicalv,
merge_tables,
show_alv1
ENDCLASS. "lcl_main DEFINITION
* CLASS lcl_main IMPLEMENTATION
CLASS lcl_main IMPLEMENTATION.
METHOD create_fieldcatalog.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE' "#EC CI_SUBRC
EXPORTING
i_structure_name = gw_datatbl
CHANGING
ct_fieldcat = gt_fcat1
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
* Implement suitable error handling here
ENDIF.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE' "#EC CI_SUBRC
EXPORTING
i_structure_name = gw_descrptbl
CHANGING
ct_fieldcat = gt_fcat2
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
* Implement suitable error handling here
ENDIF.
ENDMETHOD. "create_fieldcatalog
METHOD create_dynamicalv.
* DATA: lr_data TYPE REF TO data.
CLEAR lr_data.
CALL METHOD cl_alv_table_create=>create_dynamic_table
"#EC CI_SUBRC
EXPORTING
* i_style_table =
it_fieldcatalog = gt_fcat2
* i_length_in_byte =
IMPORTING
ep_table = lr_data
* e_style_fname =
EXCEPTIONS
generate_subpool_dir_full = 1
OTHERS = 2.
IF sy-subrc <> 0.
*MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMETHOD. "create_dynamicalv
METHOD merge_tables.
SORT gt_fcat2 BY col_pos.
ASSIGN lr_data->* TO <gfs_t_final>.
LOOP AT <gfs_tab1> ASSIGNING <gfs_w_tab1>.
APPEND INITIAL LINE TO <gfs_t_final> ASSIGNING <gfs_final>.
LOOP AT gt_fcat2 ASSIGNING <gfs_s_fcat>. "#EC CI_NESTED
ASSIGN COMPONENT <gfs_s_fcat>-fieldname OF STRUCTURE
<gfs_w_tab1> TO <gfs_field>.
IF sy-subrc EQ 0 AND <gfs_field> IS ASSIGNED.
ASSIGN COMPONENT <gfs_s_fcat>-fieldname OF STRUCTURE
<gfs_final> TO <gfs_field_final>.
IF sy-subrc EQ 0 AND <gfs_field_final> IS ASSIGNED.
<gfs_field_final> = <gfs_field>.
ENDIF.
*** Creating dynamic where clause for the key fields
IF <gfs_s_fcat>-key = 'X'.
READ TABLE gt_fcat2_t ASSIGNING <gfs_s_fcat2>
WITH KEY
key = abap_true
fieldname = <gfs_s_fcat>-fieldname.
IF sy-subrc EQ 0.
IF gw_string IS INITIAL.
*Putting value into quotes
CONCATENATE `'` <gfs_field> `'` INTO gw_str.
*Concatenating first field into string
CONCATENATE <gfs_s_fcat>-fieldname '=' gw_str
INTO gw_string SEPARATED BY space.
CLEAR gw_str.
ELSE.
*Concatenating rest all key fields
CONCATENATE `'` <gfs_field> `'` INTO gw_str.
CONCATENATE gw_string 'AND' <gfs_s_fcat>-fieldname
'=' gw_str INTO gw_string SEPARATED BY space.
CLEAR gw_str.
ENDIF.
ENDIF.
*** End of Creation
ENDIF.
ENDIF.
ENDLOOP.
IF NOT gw_string IS INITIAL.
*Concatenating sy-langu (-> always present)
CONCATENATE gw_string 'AND LANGU = SY-LANGU'
INTO gw_string SEPARATED BY space.
ENDIF.
*** Filling Description field based on dynamically created where clause
LOOP AT <gfs_tab2> ASSIGNING <gfs_w_tab2> WHERE (gw_string).
"#EC CI_NESTED
ASSIGN COMPONENT 'TXTLG' OF STRUCTURE <gfs_w_tab2>
TO <gfs_field>.
IF sy-subrc EQ 0 AND <gfs_field> IS ASSIGNED.
ASSIGN COMPONENT 'TXTLG' OF STRUCTURE <gfs_final>
TO <gfs_field_final>.
IF sy-subrc EQ 0 AND <gfs_field_final> IS ASSIGNED.
<gfs_field_final> = <gfs_field>.
ENDIF.
ENDIF.
ENDLOOP.
CLEAR gw_string.
ENDLOOP.
ENDMETHOD. "merge_tables
METHOD create_alv3.
CREATE DATA gr_r_ref TYPE TABLE OF (gw_datatbl).
ASSIGN gr_r_ref->* TO <gfs_tab1>.
SELECT *
INTO TABLE <gfs_tab1>
FROM (gw_datatbl) CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND mbr_name IN s_member
AND /cpmb/calc EQ 'N'.
IF sy-subrc EQ 0.
IF p_hir IS NOT INITIAL.
CLEAR gw_hircond.
CONCATENATE '/CPMB/HIR' 'NE' 'P_HIR' INTO gw_hircond
SEPARATED BY space.
DELETE <gfs_tab1> WHERE (gw_hircond).
ENDIF.
CLEAR: gr_r_ref.
CREATE DATA gr_r_ref TYPE TABLE OF (gw_descrptbl).
ASSIGN gr_r_ref->* TO <gfs_tab2>.
SELECT *
FROM (gw_descrptbl) CLIENT SPECIFIED
INTO TABLE <gfs_tab2>
WHERE mandt EQ sy-mandt
AND langu EQ sy-langu.
IF sy-subrc EQ 0.
READ TABLE gt_refdata INTO gw_refdata INDEX 1.
IF sy-subrc EQ 0.
CLEAR gr_r_ref.
CREATE DATA gr_r_ref TYPE TABLE OF (gw_refdata-data_table).
ASSIGN gr_r_ref->* TO <gfs_tab3>.
SELECT *
INTO TABLE <gfs_tab3>
FROM (gw_refdata-data_table) CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND /cpmb/calc EQ 'N'.
IF sy-subrc EQ 0.
CLEAR gr_r_ref.
CREATE DATA gr_r_ref TYPE TABLE OF (gw_refdata-desc_table).
ASSIGN gr_r_ref->* TO <gfs_tab4>.
SELECT *
INTO TABLE <gfs_tab4>
FROM (gw_refdata-desc_table) CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND langu EQ sy-langu.
lcl_main=>create_fieldcatalog( ).
gt_fcat2_t[] = gt_fcat2[].
DELETE gt_fcat2 WHERE fieldname NE 'TXTLG'.
APPEND LINES OF gt_fcat1 TO gt_fcat2.
gw_len = lines( gt_fcat2 ).
gw_len = gw_len + 1.
gw_fcat-fieldname = 'TXTLG1'.
gw_fcat-reptext = 'Attribute Description'.
gw_fcat-col_pos = gw_len.
gw_fcat-outputlen = 60.
APPEND gw_fcat TO gt_fcat2.
SORT gt_fcat2 BY fieldname.
READ TABLE gt_techattr INTO gw_techattr INDEX 1.
LOOP AT gt_fcat2 INTO gw_fcat.
READ TABLE gt_attr INTO gw_attr
WITH KEY tech_name = gw_fcat-fieldname.
IF sy-subrc EQ 0.
gw_fcat-reptext = gw_attr-caption.
ENDIF.
IF gw_fcat-fieldname = 'TXTLG'.
gw_fcat-outputlen = 60.
ENDIF.
MODIFY gt_fcat2 FROM gw_fcat TRANSPORTING
outputlen reptext .
IF gw_fcat-fieldname NE 'MBR_NAME'
AND gw_fcat-fieldname NE 'TXTLG'
AND gw_fcat-fieldname NE 'TXTLG1'
AND gw_fcat-fieldname NE gw_techattr-tech_name."gw_attrib.
gw_fcat-no_out = 'X'.
MODIFY gt_fcat2 FROM gw_fcat TRANSPORTING no_out.
ENDIF.
ENDLOOP.
lcl_main=>create_dynamicalv( ).
lcl_main=>merge_tables( ).
CLEAR gw_cond.
READ TABLE gt_techattr INTO gw_techattr INDEX 1.
* CONCATENATE 'MBR_NAME =' '<Gfs_field>' INTO Gw_cond
* SEPARATED BY space.
TRANSLATE gw_techattr-tech_name TO UPPER CASE.
CONCATENATE `'` gw_techattr-tech_name `'`
'=' '<Gfs_field>' INTO gw_cond
SEPARATED BY space.
CHECK NOT <gfs_t_final> IS INITIAL.
SORT <gfs_t_final> BY (gw_techattr-tech_name).
LOOP AT <gfs_tab3> ASSIGNING <gfs_w_tab3>.
ASSIGN COMPONENT 'MBR_NAME' OF STRUCTURE <gfs_w_tab3>
TO <gfs_field>.
IF sy-subrc EQ 0 AND <gfs_field> IS ASSIGNED.
DELETE <gfs_t_final> WHERE (gw_cond).
ENDIF.
IF <gfs_t_final> IS INITIAL.
EXIT.
ENDIF.
ENDLOOP.
*adding attribute description
DATA gw_cond1 TYPE string.
DATA gw_cond2 TYPE string.
CLEAR gw_cond1.
CONCATENATE `'` gw_techattr-tech_name `'` 'eq' '<gfs_field>'
INTO gw_cond1 SEPARATED BY space.
CLEAR gw_cond2.
CONCATENATE 'TXTLG1' 'eq' 'SPACE'
INTO gw_cond2 SEPARATED BY space.
CLEAR gw_cond.
CONCATENATE 'TXTLG' 'NE' 'SPACE' INTO gw_cond SEPARATED BY
space.
gw_sortcond = 'TXTLG'.
SORT <gfs_tab4> BY (gw_sortcond).
LOOP AT <gfs_t_final> ASSIGNING <gfs_final> WHERE
(gw_cond2).
ASSIGN COMPONENT gw_techattr-tech_name OF STRUCTURE
<gfs_final> TO <gfs_field>.
IF sy-subrc EQ 0 AND <gfs_field> IS ASSIGNED.
ASSIGN COMPONENT 'TXTLG1' OF STRUCTURE
<gfs_final> TO <gfs_field4>.
IF sy-subrc EQ 0 AND <gfs_field4> IS ASSIGNED.
LOOP AT <gfs_tab4> ASSIGNING <gfs_attr>
WHERE (gw_cond).
ASSIGN COMPONENT 2 OF STRUCTURE <gfs_attr> TO
<gfs_field2>.
IF sy-subrc EQ 0 AND <gfs_field2> IS ASSIGNED.
ASSIGN COMPONENT 5 OF STRUCTURE <gfs_attr>
TO <gfs_field3>.
IF sy-subrc EQ 0 AND <gfs_field3> IS ASSIGNED.
IF <gfs_field> EQ <gfs_field2>.
<gfs_field4> = <gfs_field3>.
MODIFY <gfs_t_final> FROM <gfs_final>
TRANSPORTING ('TXTLG1') WHERE (gw_cond1).
EXIT.
ENDIF.
ENDIF.
ENDIF.
ENDLOOP.
ENDIF.
ENDIF.
ENDLOOP.
* LOOP AT <gfs_tab4> ASSIGNING <gfs_attr> WHERE (gw_cond) .
* ASSIGN COMPONENT 2 OF STRUCTURE <gfs_attr> TO
* <gfs_field2>.
* IF sy-subrc EQ 0 AND <gfs_field2> IS ASSIGNED.
* ASSIGN COMPONENT 5 OF STRUCTURE <gfs_attr> TO
* <gfs_field3>.
* IF sy-subrc EQ 0 AND <gfs_field3> IS ASSIGNED.
* LOOP AT <gfs_t_final> ASSIGNING <gfs_final>
* WHERE (gw_cond2).
* ASSIGN COMPONENT gw_techattr-tech_name OF STRUCTURE
* <gfs_final> TO <gfs_field>.
* IF sy-subrc EQ 0 AND <gfs_field> IS ASSIGNED.
* ASSIGN COMPONENT 'TXTLG1' OF STRUCTURE <gfs_final>
* TO <gfs_field4>.
* IF sy-subrc EQ 0 AND <gfs_field4> IS ASSIGNED.
* IF <gfs_field> EQ <gfs_field2>.
* <gfs_field4> = <gfs_field3>.
* MODIFY <gfs_t_final> FROM <gfs_final>
* TRANSPORTING ('TXTLG1') WHERE (gw_cond1).
* EXIT.
* ENDIF.
* ENDIF.
* ENDIF.
* ENDLOOP.
* ENDIF.
* ENDIF.
* ENDLOOP.
IF <gfs_t_final> IS NOT INITIAL.
CALL SCREEN 9000.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDMETHOD. "create_alv3
METHOD create_alv2.
READ TABLE gt_techattr INTO gw_techattr INDEX 1.
CONCATENATE gw_techattr-tech_name 'EQ' 'space' INTO gw_cond
SEPARATED
BY
space.
CREATE DATA gr_r_ref TYPE TABLE OF (gw_datatbl).
ASSIGN gr_r_ref->* TO <gfs_tab1>.
SELECT *
INTO TABLE <gfs_tab1>
FROM (gw_datatbl) CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND mbr_name IN s_member
AND /cpmb/calc EQ 'N'
AND (gw_cond).
IF sy-subrc EQ 0.
IF p_hir IS NOT INITIAL.
CLEAR gw_hircond.
CONCATENATE '/CPMB/HIR' 'NE' 'P_HIR' INTO gw_hircond
SEPARATED BY space.
DELETE <gfs_tab1> WHERE (gw_hircond).
ENDIF.
CLEAR: gr_r_ref.
CREATE DATA gr_r_ref TYPE TABLE OF (gw_descrptbl).
ASSIGN gr_r_ref->* TO <gfs_tab2>.
SELECT *
FROM (gw_descrptbl) CLIENT SPECIFIED
INTO TABLE <gfs_tab2>
WHERE mandt EQ sy-mandt
AND langu EQ sy-langu.
IF sy-subrc EQ 0.
lcl_main=>create_fieldcatalog( ).
gt_fcat2_t[] = gt_fcat2[].
DELETE gt_fcat2 WHERE fieldname NE 'TXTLG'.
APPEND LINES OF gt_fcat1 TO gt_fcat2.
SORT gt_fcat2 BY fieldname.
LOOP AT gt_fcat2 INTO gw_fcat.
READ TABLE gt_attr INTO gw_attr WITH KEY
tech_name = gw_fcat-fieldname.
IF sy-subrc EQ 0.
gw_fcat-reptext = gw_attr-caption.
ENDIF.
IF gw_fcat-fieldname = 'TXTLG'.
gw_fcat-outputlen = 60.
ENDIF.
MODIFY gt_fcat2 FROM gw_fcat TRANSPORTING outputlen reptext.
* READ TABLE gt_attrib INTO gw_attrib INDEX 1.
* IF sy-subrc EQ 0.
IF gw_fcat-fieldname NE 'MBR_NAME'
AND gw_fcat-fieldname NE 'TXTLG'
AND gw_fcat-fieldname NE gw_techattr-tech_name."gw_attrib.
gw_fcat-no_out = 'X'.
MODIFY gt_fcat2 FROM gw_fcat TRANSPORTING no_out.
ENDIF.
* ENDIF.
ENDLOOP.
lcl_main=>create_dynamicalv( ).
lcl_main=>merge_tables( ).
CHECK NOT <gfs_t_final> IS INITIAL.
SORT <gfs_t_final> BY ('MBR_NAME').
CALL SCREEN 9000.
ENDIF.
ENDIF.
ENDMETHOD. "create_alv2
METHOD create_alv1.
CREATE DATA gr_r_ref TYPE TABLE OF (gw_datatbl).
ASSIGN gr_r_ref->* TO <gfs_tab1>.
SELECT *
FROM (gw_datatbl) CLIENT SPECIFIED
INTO TABLE <gfs_tab1>
WHERE mandt EQ sy-mandt
AND mbr_name IN s_member.
IF sy-subrc EQ 0.
IF p_hir IS NOT INITIAL.
CLEAR gw_hircond.
CONCATENATE '/CPMB/HIR' 'NE' 'P_HIR'
INTO gw_hircond SEPARATED BY
space.
DELETE <gfs_tab1> WHERE (gw_hircond).
ENDIF.
CLEAR: gr_r_ref.
CREATE DATA gr_r_ref TYPE TABLE OF (gw_descrptbl).
ASSIGN gr_r_ref->* TO <gfs_tab2>.
SELECT *
FROM (gw_descrptbl) CLIENT SPECIFIED
INTO TABLE <gfs_tab2>
WHERE mandt EQ sy-mandt
AND langu EQ sy-langu.
IF sy-subrc EQ 0.
lcl_main=>create_fieldcatalog( ).
SORT gt_fcat2 BY col_pos fieldname.
gt_fcat2_t[] = gt_fcat2[].
DELETE gt_fcat2 WHERE fieldname NE 'TXTLG'.
APPEND LINES OF gt_fcat1 TO gt_fcat2.
SORT gt_fcat2 BY fieldname.
SORT gt_attr BY tech_name.
LOOP AT gt_fcat2 INTO gw_fcat .
IF gw_fcat-reptext IS INITIAL.
READ TABLE gt_attr INTO gw_attr
WITH KEY tech_name = gw_fcat-fieldname BINARY SEARCH.
IF sy-subrc EQ 0.
gw_fcat-reptext = gw_attr-caption.
ELSE.
gw_fcat-reptext = gw_fcat-fieldname.
ENDIF.
ENDIF.
IF gw_fcat-fieldname EQ 'OBJVERS'.
gw_fcat-no_out = 'X'.
ELSEIF gw_fcat-fieldname EQ 'ROWFLAG'.
gw_fcat-no_out = 'X'.
ELSEIF gw_fcat-fieldname EQ 'MBR_NAME'.
gw_fcat-no_out = 'X'.
ELSEIF gw_fcat-fieldname EQ '/CPMB/CALC'.
gw_fcat-no_out = 'X'.
ELSEIF gw_fcat-fieldname EQ 'TXTLG'.
gw_fcat-outputlen = 70.
ELSEIF gw_fcat-fieldname EQ '/CPMB/HIR'.
gw_fcat-outputlen = 20.
ENDIF.
MODIFY gt_fcat2 FROM gw_fcat
TRANSPORTING reptext no_out outputlen.
ENDLOOP.
lcl_main=>create_dynamicalv( ).
lcl_main=>merge_tables( ).
CHECK NOT <gfs_t_final> IS INITIAL.
* SORT <gfs_t_final> BY ('TXTLG').
CALL SCREEN 9000.
ENDIF.
ENDIF.
ENDMETHOD. "show_alv1
METHOD show_alv1.
IF go_custom_container IS INITIAL.
CREATE OBJECT go_custom_container
EXPORTING
* parent =
container_name = gw_g_container
* style =
* lifetime = lifetime_default
* repid =
* dynnr =
* no_autodef_progid_dynnr =
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT go_grid1
EXPORTING
* i_shellstyle = 0
* i_lifetime =
i_parent = go_custom_container
* i_appl_events = 'X'
* i_parentdbg =
* i_applogparent =
* i_graphicsparent =
* i_name =
* i_fcat_complete = SPACE
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
OTHERS = 5
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD go_grid1->set_table_for_first_display "#EC CI_SUBRC
* EXPORTING
* i_buffer_active =
* i_bypassing_buffer =
* i_consistency_check =
* i_structure_name =
* is_variant =
* i_save = 'X'
** i_default = 'X'
* is_layout =
** is_print =
** it_special_groups =
* it_toolbar_excluding =
* it_hyperlink =
* it_alv_graphics =
* it_except_qinfo =
* ir_salv_adapter =
CHANGING
it_outtab = <gfs_t_final>
it_fieldcatalog = gt_fcat2
* it_sort =
* it_filter =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc <> 0.
* Implement suitable error handling here
ENDIF.
ENDIF.
ENDMETHOD. "SHOW_alv1
ENDCLASS. "lcl_main IMPLEMENTATION
AT SELECTION-SCREEN OUTPUT.
IF p_radio1 EQ 'X'.
LOOP AT SCREEN.
IF screen-group1 = 'M1'.
screen-active = 0.
MODIFY SCREEN.
ENDIF.
* IF screen-group1 = 'M'.
* screen-active = 0.
* MODIFY SCREEN.
* ENDIF.
ENDLOOP.
ENDIF.
* IF p_radio2 EQ 'X'.
* LOOP AT SCREEN.
* IF p_reason EQ 30.
* IF screen-group1 = 'M2'.
* screen-active = 0.
* MODIFY SCREEN.
* ENDIF.
* ENDIF.
* ENDLOOP.
* ENDIF.
START-OF-SELECTION.
IF p_radio1 EQ 'X'.
SELECT SINGLE data_table desc_table
INTO (gw_datatbl , gw_descrptbl)
FROM uja_dimension CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND appset_id EQ p_env
AND dimension EQ p_dim.
IF sy-subrc EQ 0.
SELECT appset_id dimension tech_name attribute_name caption
INTO TABLE gt_attr
FROM uja_dim_attr CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND appset_id EQ p_env
AND dimension EQ p_dim.
IF sy-subrc EQ 0.
lcl_main=>create_alv1( ).
ENDIF.
ENDIF.
ELSE.
IF p_reason NE 30.
SELECT *
INTO TABLE gt_except
FROM zbpcbt007 CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND appset_id EQ p_env
AND dimension EQ p_dim
AND reasoncd EQ p_reason.
IF sy-subrc EQ 0.
SELECT SINGLE data_table desc_table
INTO (gw_datatbl,gw_descrptbl)
FROM uja_dimension CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND appset_id EQ p_env
AND dimension EQ p_dim.
IF sy-subrc EQ 0.
SELECT appset_id dimension tech_name attribute_name caption
INTO TABLE gt_attr
FROM uja_dim_attr CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND appset_id EQ p_env
AND dimension EQ p_dim.
IF sy-subrc EQ 0.
gt_except_t[] = gt_except[].
SORT gt_except_t.
DELETE ADJACENT DUPLICATES FROM gt_except_t.
IF gt_except_t IS NOT INITIAL.
SELECT tech_name
INTO TABLE gt_techattr
FROM uja_dim_attr CLIENT SPECIFIED
FOR ALL ENTRIES IN gt_except_t
WHERE mandt EQ sy-mandt
AND appset_id EQ p_env
AND dimension EQ p_dim
AND attribute_name EQ gt_except_t-attrib.
IF sy-subrc EQ 0.
lcl_main=>create_alv2( ).
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ELSEIF p_reason EQ 30.
SELECT SINGLE data_table desc_table
INTO (gw_datatbl,gw_descrptbl)
FROM uja_dimension CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND appset_id EQ p_env
AND dimension EQ p_dim.
IF sy-subrc EQ 0.
* gt_except_t[] = gt_except[].
* SORT gt_except_t BY attrib.
* DELETE ADJACENT DUPLICATES FROM gt_except_t COMPARING attrib.
* IF gt_except_t IS NOT INITIAL.
SELECT refdimension
INTO TABLE gt_refdim
FROM zbpcbt009 CLIENT SPECIFIED
* FOR ALL ENTRIES IN gt_except_t
WHERE mandt EQ sy-mandt
AND appset_id EQ p_env
AND dimension EQ p_dim
AND attrib EQ p_attr."gt_except_t-attrib.
IF sy-subrc EQ 0.
gt_refdim_t[] = gt_refdim[].
SORT gt_refdim_t BY dimension.
DELETE ADJACENT DUPLICATES FROM gt_refdim_t COMPARING
dimension.
IF gt_refdim_t IS NOT INITIAL.
SELECT data_table desc_table
INTO TABLE gt_refdata
FROM uja_dimension CLIENT SPECIFIED
FOR ALL ENTRIES IN gt_refdim_t
WHERE mandt EQ sy-mandt
AND appset_id EQ p_env
AND dimension EQ gt_refdim_t-dimension.
IF sy-subrc EQ 0.
SELECT appset_id dimension tech_name attribute_name
caption
INTO TABLE gt_attr
FROM uja_dim_attr CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND appset_id EQ p_env
AND dimension EQ p_dim.
IF sy-subrc EQ 0.
SELECT tech_name
INTO TABLE gt_techattr
FROM uja_dim_attr CLIENT SPECIFIED
* FOR ALL ENTRIES IN gt_except_t
WHERE mandt EQ sy-mandt
AND appset_id EQ p_env
AND dimension EQ p_dim
AND attribute_name EQ p_attr."gt_except_t-attrib.
IF sy-subrc EQ 0.
REFRESH: gt_refdim_t.",gt_except_t.
lcl_main=>create_alv3( ).
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
* ENDIF.
* ENDIF.
ENDIF.
ENDIF.
*& Module SHOW_ALV1 OUTPUT
*&-------Yes you can, although you need to do it slightly differently, depending on what your 'original' form is doing.
You end up having to do two things:
1. In your second tabular form, you need to explicitly identify the relevant form fields using calls to the relevant APEX_ITEM functions - as well as this, you need to 'manually' specify the array number in the arguments for the function call, ensuring it doesn't overlap with your original form. Normally, this aspect is done for you.
2. Create your own custom CRUD processes, referencing the above elements. There are a few threads floating around the forum relating to how to deal with this. Do a search for "APEX_APPLICATION.G_F" or "HTMLDB_APPLICATION.G_F" for pointers.
Happy hunting! -
Hi Experts,
I want to display two graphs in a single screen. It should be a pie chart.
Currently I did one pie chart using GRAPH_MATRIX_2D.
It is working fine.
But i want to display another PIE Chart within the same screen.
Can anyone help me sort out?
Thanks in advanceHi Vimal,
Go throungh the following code. it will help you.
REPORT Z_3DGRAPH.*structure declaration for performance measurementTYPES: BEGIN OF ty_performance,
company(15) TYPE c,
q1 TYPE i,
q2 TYPE i,
q3 type i,
q4 type i,
END OF ty_performance.*structure declaration for options table
types : BEGIN OF ty_opttable,
options(30) TYPE c,
END OF ty_opttable.*Internal table and work area declarations
DATA: it_performance TYPE STANDARD TABLE OF ty_performance,
wa_performance TYPE ty_performance.DATA : it_opttable type standard table of ty_opttable,
wa_opttable type ty_opttable.*initialization event
INITIALIZATION.*start of selection event
START-OF-SELECTION.*clearing the work areas
CLEAR WA_PERFORMANCE.
CLEAR wa_opttable.*appending values into the performance internal table
wa_performance-company = 'Company A'.
wa_performance-q1 = 78.
wa_performance-q2 = 68.
wa_performance-q3 = 79.
wa_performance-q4 = 80.append wa_performance to it_performance.wa_performance-company = 'Company B'.
wa_performance-q1 = 48.
wa_performance-q2 = 68.
wa_performance-q3 = 69.
wa_performance-q4 = 70.append wa_performance to it_performance.wa_performance-company = 'Company C'.
wa_performance-q1 = 78.
wa_performance-q2 = 48.
wa_performance-q3 = 79.
wa_performance-q4 = 85.append wa_performance to it_performance.*appending values into the options internal tablewa_opttable-options = 'P3TYPE = TO'.
APPEND wa_opttable TO it_opttable.wa_opttable-options = 'P2TYPE = VB'.
APPEND wa_opttable TO it_opttable.wa_opttable-options = 'TISIZE = 1'.
APPEND wa_opttable TO it_opttable.*calling the graph function module
CALL FUNCTION 'GRAPH_MATRIX_3D'
EXPORTING
col1 = 'Quarter 1'
col2 = 'Quarter 2'
col3 = 'Quarter 3'
col4 = 'Quarter 4'
dim1 = 'In Percentage%'
set_focus = 'X'
titl = 'Company Performances'
TABLES
data = it_performance
opts = it_opttable
EXCEPTIONS
others = 1.
Regards,
Rajesh Kumar -
Questions on handling two table controls on one screen.
Can some people please share some technology tips on handling two table controls on one screen .
Thanks
Moderator message - You'll find some cool tips if you search the forum or use Google first - post locked
Edited by: Rob Burbank on Dec 7, 2009 11:20 AMhi
other Table is in Disable mode.
check that u have unticked the READ ONLY property of ur UI
also check if u have binded the ENABLE property of ur table UI to WDY_BOOLEAN in some method
and u r setting it to 'X'
in the OnToggle event of ur Checkbox , set this attribute to 'X to make the checkbox ticked
in the OnToggle event of ur Checkbox , set this attribute to ' ' to make the checkbox un ticked
DATA lo_nd_cn_node TYPE REF TO if_wd_context_node.
DATA lo_el_cn_node TYPE REF TO if_wd_context_element.
DATA ls_cn_node TYPE wd_this->element_cn_node .
DATA lv_attr LIKE ls_city-ca_attr.
* navigate from <CONTEXT> to <CN_VISIBLE> via lead selection
lo_nd_node = wd_context->get_child_node( name = wd_this->wdctx_ca_attr).
* get element via lead selection
lo_el_cn_node = lo_nd_cn_node->get_element( ).
* set single attribute
lo_el_cn_node->set_attribute(
EXPORTING
name = `CA_ATTR`
value = ' ' ).
// set attribute CA_ATTR under CN_NODE to ' '
// this will make the table UI control disabled
// this is a code generated thru code wizard ( control +f7) , read context node/attribute
// use SET_ATTRIBUTE method
regards,
amit -
Is that possible two tables in a single forms block.
actually we can assign one database table in a block
but i like to know is there any possibilities of having 2 tables in a
block?Stalin,
Yes, this is possible. Essentially, you are performing a join on the tables in your block which means you have to fully qualify each column in the block so Forms knows which column belongs to which table. For detailed information take a look at the Oracle White Paper: Basing a Forms Data Block on a Join. This works quite well and the tables your block is based on is fully updatable, whereas if you were to create a view and base your block on the view, most likely your view would not be updatable.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly. -
Dispaly of two tables for a single tab in tabstrip
Hi Experts,
I have three tables,one is the consolidated table of another one and the third one is completely different but the requirement is ,
for a SINGLE TAB click of a tab strip both the tables which are related have to be displayed
and for the the third table a new tab has to be clicked.
,i know to display only one ui element for one tab .
please help me out with this problem of displaying of two tables for a single tabHi Shanmukha,
Suppose you name of name of tables which need to be displayed in one tab is table 1 and table 2. To get this you can try these steps:
method 1:
- create a view with 2 tables in it i.e table 1 and table 2. create a view container UI element in tab strip and embed this view in it.
method 2
- create view1 containing table 2 only.
- create view 2 containing table 1 and a view container UI element. Embed view 1 in the view container of this view. Now your view 2 contains both the tables.
- In the tab strip's tab, create another view container UI element and embed view2 in it.
I hope it helps.
Regards
Arjun -
Reg:Using Two Table controls in one screen
Dear All,
I created two tables in a screen such that both the table fields are of Input fields type .I created first table which will
accept the inputs and below it I created another Table which is also of Input field type.But when I execute the component I am getting only first Table in Input mode and the other Table is in Disable mode.
What can be the problem??hi
other Table is in Disable mode.
check that u have unticked the READ ONLY property of ur UI
also check if u have binded the ENABLE property of ur table UI to WDY_BOOLEAN in some method
and u r setting it to 'X'
in the OnToggle event of ur Checkbox , set this attribute to 'X to make the checkbox ticked
in the OnToggle event of ur Checkbox , set this attribute to ' ' to make the checkbox un ticked
DATA lo_nd_cn_node TYPE REF TO if_wd_context_node.
DATA lo_el_cn_node TYPE REF TO if_wd_context_element.
DATA ls_cn_node TYPE wd_this->element_cn_node .
DATA lv_attr LIKE ls_city-ca_attr.
* navigate from <CONTEXT> to <CN_VISIBLE> via lead selection
lo_nd_node = wd_context->get_child_node( name = wd_this->wdctx_ca_attr).
* get element via lead selection
lo_el_cn_node = lo_nd_cn_node->get_element( ).
* set single attribute
lo_el_cn_node->set_attribute(
EXPORTING
name = `CA_ATTR`
value = ' ' ).
// set attribute CA_ATTR under CN_NODE to ' '
// this will make the table UI control disabled
// this is a code generated thru code wizard ( control +f7) , read context node/attribute
// use SET_ATTRIBUTE method
regards,
amit -
Displaying two pages on a single screen on iPad
In the desktop version Adobe Reader can display two pages of a document on a single screen within the app. I hope Adobe will bring that feature on iPad which will be available if the iPad is in the landscape mode.
In the desktop version Adobe Reader can display two pages of a document on a single screen within the app. I hope Adobe will bring that feature on iPad which will be available if the iPad is in the landscape mode.
-
Two tables in a single main window
Hi,
I need to create 2 tables in a single main window with some gap between 2 tables..
can I keep any main heading for the second table?
Please let me know how can I do this?
Regards
SandeepAs also told by others just create a blank TEXT in between the two tables. In this text keep blank lines as per your requirement and for heading of second table, do it in the heading part of your TABLE2 then it will print accordingly.
MAIN_WINDOW
TABLE1
TEXT_GAP
TABLE2
With luck,
Pritam. -
Updating two table from a single query
I have two table such as
user_log(user_id , password)
and
user_info(user_id , name , age , address , sex , email , contact)
If I want to add data from a single form in php then what is the query?Hi,
welcome to the forum..! plesae always post table data and expected result to help forum members help you better.
From what I understand, all you need is a join on userid (assuming userid is unique/primary key )
select ul.userid,
ul.password,
ui.name,
ui.age
from user_log ul,
user_info ui
where ul.user_id = ui.user_id
---- and any otehr condition for the user that you need.(where clause)In PHP......(based on this link.. http://wiki.oracle.com/page/PHP+Oracle+FAQ
haven't tested the code.. )
<?php
$conn = oci_connect("scott", "tiger", "localhost/XE");
if (!$conn) {
$m = oci_error();
echo $m["message"];
exit;
$stid = oci_parse($conn, "select ul.userid,
ul.password,
ui.name,
ui.age
from user_log ul,
user_info ui
where ul.user_id = ui.user_id");
oci_execute($stid);
// Query the table
echo "<table border='1'>";
while ($row = oci_fetch_array($stid, OCI_ASSOC+OCI_RETURN_NULLS)) {
echo "<tr>";
foreach ($row as $item) {
echo "<td>".($item!==null?htmlentities($item):" ")."</td>";
echo "</tr>".PHP_EOL;
echo "</table>";
oci_free_statement($stid);
oci_close($conn);
?>Try to provide more details.. if this is not what you are looking for.
Hope this helps,
Rajesh. -
Insert into two tables with a single query (same ID)
Hello,
I want to insert two tables at the same time ( with a single query) provided that both records get inserted with the same id. How do I do this?
Table Movies
id
name
Table Category
movie_id
cat_typea) Insert into first table, retrieve the id (may be by using my_sequence.currval and then insert into another table.
issue: Makes three query to the db, I am also guessing that when multiple people try to insert there will be an issue, I might be wrong.
I don't have any other idea.
Greatly appreciated!Why don't use multitable insert ? It's available from 9i.
A sequence.nextval will return the same value within the whole instruction
so all records can be inserted with the same id.
Look at this example:
DROP TABLE A;
DROP TABLE B;
drop sequence a_seq;
CREATE TABLE A(
ID NUMBER,
FIRSTNAME VARCHAR2(50)
CREATE TABLE B AS
SELECT id, firstname lastname FROM a;
CREATE SEQUENCE a_seq
START WITH 1;
INSERT ALL
INTO A(ID, FIRSTNAME) VALUES(A_SEQ.NEXTVAL, FNAME)
INTO B(ID, LASTNAME) VALUES(A_SEQ.NEXTVAL, LNAME)
SELECT 'fname ' || LEVEL FNAME, 'lname ' || LEVEL LNAME
FROM DUAL
CONNECT BY LEVEL < 10
COMMIT;
SELECT * FROM A;
SELECT * FROM b;
DROP TABLE A succeeded.
DROP TABLE B succeeded.
drop sequence a_seq succeeded.
CREATE TABLE succeeded.
CREATE TABLE succeeded.
CREATE SEQUENCE succeeded.
18 rows inserted
commited
ID FIRSTNAME
3 fname 1
4 fname 2
5 fname 3
6 fname 4
7 fname 5
8 fname 6
9 fname 7
10 fname 8
11 fname 9
9 rows selected
ID LASTNAME
3 lname 1
4 lname 2
5 lname 3
6 lname 4
7 lname 5
8 lname 6
9 lname 7
10 lname 8
11 lname 9
9 rows selected -
How to update two tables in a single call using JDBC Sender adapter
Hello All,
The scenario is, database entries have to be selected from two tables and at the same time those tables have to be udpated with the flag.
We are using JDBC sender adapter and in Select Query, we are fetching the data by joinin the two tables.
Update Statemtent: We can only update one table using this statement.
Is it possible to update two tables using the Update Statement without using Stored Procedures.
Let me know.
Regards,
Sreenivas.Hi Sreenivas,
> Is it possible to update two tables using the Update Statement without using Stored Procedures.
Yes its possible through join statement
Check this links
Update in JDBC Sender adapter for more than one table
data from 2 tables for jdbc sender adapter
Regards
Ramesh -
How to make two tables from one single taable
Hi,
i have one table with 100 records and i want to create two tables each with 50 records and with no duplicates. if i will do on bases on empno then i have to check the min and max emp no and then divide them in two tables, is there any automate way of performing this task.
Regards,
AbidaHi,
A rather quick and dirty solution, but definitely works.
I used the HR sample schema (employees table) for this.
hsaprd@706447>create table tab1 as select * from employees where rownum <51;
Table created.
hsaprd@706447>select count(*) from tab1;
COUNT(*)
50
hsaprd@706447>create table tab2 as select * from employees where employee_id nnot in (select employee_id from tab1);
Table created.
hsaprd@706447>select count(*) from tab2;
COUNT(*)
56
hsaprd@706447>
Hope this helps!
-Anand -
How to insert into two tables using a Single ADF creation form?
Hi,
I need to make a ADF Creation Form that will insert the data at same time in two tables... Like i have two tables Track (Track_id,Track_Name)
and Module ( Module_id, Track_id, Module_name, Module_Short_name) and i have to insert the data in both the tables using Same Creation Form.
can anybody help me out and gave me the solution,how to do that?
Thanksif you want to insert different data into two different tables then you can drag the two data objects into creation form..
If you want to duplicate the data inserted in the one table to another then you can follow two approach
1. Drag and drop one table, When Save button is invoked then insert data into another table using callable statement.
or
2. Create on-insert trigger in Table1 where you can insert data into table2.
--Prasanna -
Two Tables in a single structure
Hi,
How can i declare a structure that include all the fields of two table?? Please note that there some common fields in the two tables such as MANDT.
TYPES: BEGIN OF MY_STRUCT.
INCLUDE STRUCTURE TABLEA.
INCLUDE STRUCTURE TABLEB.
END OF MY_STRUCT.
Regards,
KitHi Kit,
if you declare (say) a variable with reference to this type:
DATA: l_mystruc TYPE my_struct.
...then you can access the individual fields by appending the suffix to the name of the field.
For example, if both tables have field MANDT, you may access L_MYSTRUC-MANDTA1 for the first table and L_MYSTRUC-MANDTB1 for the second table.
You may also access the whole structure of each table, by typing L_MYSTRUC-A or L_MYSTRUC-B.
I hope this helps. Best regards,
Alvaro
Maybe you are looking for
-
Photo Features On Apple TV, Not As Good As Front Row
Hi, Does anyone know why the Photo features of the Apple TV aren't as good as Front Row in Leopard? Front Row does quite a few things that I wish my Apple TV did. Most importantly, it shows iPhoto Events along with item counts. It also shows Folders
-
How to add custom barcolor in ProgressIndicator?
Hi, I want to add custom color to barColor property of ProgressIndicator. How user defined color can be added to barColor? Thanks, Shashi
-
How to run the package programs in eclipse ?
hi all, how to run the package programs in eclipse ? plz clarify... regards balakrishna.m
-
/etc/hosts is ignored by everything
Here is the current `/etc/hosts` # Host Database # localhost is used to configure the loopback interface # when the system is booting. Do not change this entry. 127.0.0.1 localhost 255.255.255.255 broadcasthost ::1 localhost fe80::1%lo0
-
Strange Snow Leopard issues - Should I new account? Can I move my old acct?
hi, having lots of weird issues after upgrading to Snow Leopard. thinking about creating a new account, but not sure how to move my existing info to the new account. Searched Apple support, forums, didn't find anything. Any help is appreciated!!!