Two, two, two signals in one.
Simply put: can my iBook wirelessly connect to my linksys router (and, thus, my ISP) and/or my airport express (and, thus, my printer)? I want to receive the ISP signal and have the option to print to my printer via Airport Express. Any help is appreciated.
Yes, your iBook equipped with an Airport card certainly can connect wirelessly to the wireless network created by your Linksys wireless router. If you also configure the Airport Express to join the wireless network of this Linksys wireless router, then the iBook will be able to stream iTunes and print wirelessly to the Airport Express via the Linksys router - while at the same time accessing the internet via the router.
Similar Messages
-
I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either. I have an iphone 4 that will not connect to 5ghz.
thank you!Your AirPort Express is already providing two separate 2.4 GHz and 5 GHz bands, but each band is using the same wireless network name.
This is the default setup for the AirPort Express, which is recommended for most users. The theory here is that devices will automatically connect to the best quality signal based on their capabilities and distance in relation to the AirPort Express.
It is possible to assign a different name to the 5 GHz band, and then "point" devices at that network to connect. Some users swear by this option.....(I am not one of them).... but you might want to give it a try to see how it works for you.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Express
Click Edit in the smaller window that appears
Click the Wireless tab at the top of the next window
Click Wireless Options near the bottom of the next window
Enter a check mark next to 5 GHz Name.....which will automatically add "5 GHz" to the network name....so you can identify it
Click Save, then click Update and wait a full minute for the Express to restart
Now you will need to "point" your 5 GHz capable devices at the 5 GHz network name. 2.4 GHz devices will connect to your "other" network name. -
How can I measure the frequencies of two analog input signals simultaneously?
Hi
I have two AI signals, and I need to determine the frequencies of those signals. The frequencies range from 1-125Hz. I currently have a VI where I can sample one of the signals for 1 second (sampling at 300 Hz for 300 samples) and determine the frequency.
I need to read two signals at the same time and get both of the frequencies at the same time, but I can only figure out how to read them individually, so I can read one signal, then one second later I read the second one, then I read the first one again, then the sceond one, etc.. How can I read two signals simultaneously?
Thanks
Attachments:
FreqMeas11.vi 41 KB
FreqMeas11.PNG 18 KB"at same time", this depends on the hardware, you can do as has been previously stated just set up a 2 channel acquisition and you will get 2 sampled waveforms back. Most hardware A/D as multiplexed and true simultaneous sampling is not done. At 125Hz this is not an issue unless you are interested in very small phase changes between the samples. just keep this in mind if you are expecting samples to be completly synchronized.
Paul
Paul Falkenstein
Coleman Technologies Inc.
CLA, CPI, AIA-Vision
Labview 4.0- 2013, RT, Vision, FPGA -
Hello guys,
I want to use two external trigger signals for the system. But when I use the C# function "ConfigureDigitalEdgeTrigger", it just creats one external trigger port.
How can I creat two ports for two external trigger signals?
Thanks !Kristian;
I don't believe the problem you are seeing there is related to the external trigger connection, but to a too small interchannel delay in between channels.
If you don't give enough time to teh interchannel delay, the instrumentation amplifier might not have enough time to settle properly, so you will always see the signal that is connected to the previous channel on that channel, regardless what you have connected to the second channel.
The AI Config.vi has an input for you to change the interchannel delay of your acquisition.
Hope this helps.
Filipe A.
Applications Engineer
National Instruments -
Can we use two separate apple ids on one laptop to upgrade apps
can we use two separate apple ids on one laptop to upgrade apps
Welcome to the Apple Community.
Only if you use two separate user accounts. -
I am trying to develop a query in MS Access 2010 to join two tables using three joins, one of which is a (between) date range. The tables are contained in Access. The reason
the tables are contained in access because they are imported from different ODBC warehouses and the data is formatted for uniformity. I believe this cannot be developed using MS Visual Query Designer. I think writing a query in SQL would be suiting this project.
ABCPART links to XYZPART. ABCSERIAL links to XYZSERIAL. ABCDATE links to (between) XYZDATE1 and ZYZDATE2.
[ABCTABLE]
ABCORDER
ABCPART
ABCSERIAL
ABCDATE
[ZYXTABLE]
XYZORDER
XYZPART
XYZSERIAL
XYZDATE1
XYZDATE2Thank you for the looking at the post. The actual table names are rather ambiguous. I renamed them so it would make more sense. I will explain more and give the actual names. What I do not have is the actual data in the table. That is something I don't have
on this computer. There are no "Null" fields in either of the tables.
This table has many orders (MSORDER) that need to match one order (GLORDER) in GLORDR. This is based on MSPART joined to GLPART, MSSERIAL joined to GLSERIAL, and MSOPNDATE joined if it falls between GLSTARTDATE and GLENDDATE.
[MSORDR]
MSORDER
MSPART
MSSERIAL
MSOPNDATE
11111111
4444444
55555
2/4/2015
22222222
6666666
11111
1/6/2015
33333333
6666666
11111
3/5/2015
This table has one order for every part number and every serial number.
[GLORDR]
GLORDER
GLPART
GLSERIAL
GLSTARTDATE
GLENDDATE
ABC11111
444444
55555
1/2/2015
4/4/2015
ABC22222
666666
11111
1/5/2015
4/10/2015
AAA11111
555555
22222
3/2/2015
4/10/2015
Post Query table
GLORDER
MSORDER
GLSTARTDATE
GLENDDATE
MSOPNDATE
ABC11111
11111111
1/2/2015
4/4/2015
2/4/2015
ABC22222
22222222
1/5/2015
4/10/2015
1/6/2015
ABC22222
33333333
1/5/2015
4/10/2015
3/5/2015
This is the SQL minus the between date join.
SELECT GLORDR.GLORDER, MSORDR.MSORDER, GLORDR.GLSTARTDATE, GLORDR.GLENDDATE, MSORDR.MSOPNDATE
FROM GLORDR INNER JOIN MSORDR ON (GLORDR.GLSERIAL = MSORDR.MSSERIAL) AND (GLORDR.GLPART = MSORDR.MSPART); -
From two given tables, how do you fetch the values from two columns using values from one column(get values from col.A if col.A is not null and get values from col.B if col.A is null)?
Hi,
Use NVL or COALESCE:
NVL (col_a, col_b)
Returns col_a if col_a is not NULL; otherwise, it returns col_b.
Col_a and col_b must have similar (if not identical) datatypes; for example, if col_a is a DATE, then col_b can be another DATE or it can be a TIMESTAMP, but it can't be a VARCHAR2.
For more about NVL and COALESCE, see the SQL Language manual: http://docs.oracle.com/cd/E11882_01/server.112/e26088/functions119.htm#sthref1310
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables involved, and also post the results you want from that data.
Explain, using specific examples, how you get those results from that data.
Always say which version of Oracle you're using (e.g., 11.2.0.2.0).
See the forum FAQ: https://forums.oracle.com/message/9362002 -
HT204053 how do I associate two Apple id's to one iCloud account?
How do I associate two Apple id's to one iCloud account?
Ah, now you're talking about itunes store and itunes match. The itunes store account is not the same as the icloud account (the two may use the same Apple ID, buy they can be different).
As for itunes match - you cannot merge purchased music from two itunes accounts. Using one of the itunes accounts (call it A) and icloud account, use itunes match to sync the music to the cloud. Then purchase other missing songs that are not part of A (but were in the other account) and that will add them to icloud match. -
I am unable to update my apps... in my purchases page it appears as "update", then a message tells me to log on with the Apple ID I purchased the app with... Well I have tried my two different accounts and neither one will work, can someone help ??
And is there any way to sync all my purchases and accounts to just have one... It is a bit stupid that you dont even get a list of something of what account you may of used, or some kind of hint, so you could log on to the right account. I am really stuck ...
Please Advise......You can't merge accounts. But you can check your purchase history:
iTunes Store & Mac App Store: Seeing your purchase history and order numbers
http://support.apple.com/kb/HT2727
Also, what may seem stupid to you... may be a protection of privacy to others. -
How to Have Two Withholding Tax Code in One invoice
Hello,
We are using Extended Withholding Tax, and we have defined 9 Withholding Tax type specials, this because is the same withholding type, but we different %, also we have defined more than one Withholding Tax Code, for each one. This kind of Withholding Tax in Venezuela it is called ISAE, and for one invoice I could have more than one ISAE Withholding Tax, in this with have configurated diferents withholdings tax types, but it is a issue because, the system generate one Certificate Numbering for Withholding Tax, but for us this needs to be the same,and only generates one Certificate Number and make the sum of the two amounts. Because is the same Withholding Tax, we need to report only one.
E.g. I post an invoice 1000999, with two Withholding Tax type, 23 -with tax code 01 and 24 with tax code 02, when i Generate the report I get:
Vendor Certificate Number Wh. t.t. Wtx Amount in RC wt amount
10000 00000000001 23 01 90000 2000
10000 00000000002 24 02 90000 1500
We need:
Vendor Certificate Number Wh. t.t. Wtx Amount in RC wt amount
10000 00000000001 23 01 90000 3500
We tried to defined only one Withholding Tax type with all the Withholding Tax Code, but the system doesn't allow to post in the vendor master data, more that one Withholding Tax type, we tried to leave it blank, but when we do the FB60, we can´t select multiple Tax Code.
How we can post a document with more tham one tax code? or what we have to do to solve the problem?
I appreciate all the help you can provide me.Hello Mauri
Thanks for your answer, but in this moment we have the configuration exactly like you suggest, but in the moment of we generate the certification number we get two or more numbers, and we only need that the systme generates only one. It is correct that the sistem generates two or more because in one invoice we need and we use two or more wt type ISAE, but for Legal Reasons we need that the system generates only one certificated number, because is the same wt type. You know if we can do any validation? or we must do anything else to get only one certificated number? we never know or is not a rule to use a specific combination of Wt Type.
tks Fati -
I bought my duaghter an ipod. Can I have two seperate itunes libraries on one computer? If so, how do I set this up?
I followed these instructions & have created a new library file. However, all my music now appears in the new library as well as my own. (I bought my daughter an ipod nano for christmas & want to separate itunes libraries on one computer). How can this be so difficult?
-
Two copies of iTunes on one computer?
A pretty stupid problem, but I can't figure it out. It appears that there are two copies of iTunes on one of our computers--or at least, iTunes somehow displaying two different profiles. If I have "start iTunes automatically" checked, when I connect the iPod, iTunes opens, and it shows the location of the Library file as on the workstation's local HD. Conversely, if I use the shortcut icon on the desktop to open iTunes, it points to a Library location on a network shared drive (which is where I want it to be).
I cannot for the life of me figure out where the two copies, if they exist, of the iTunes.exe file are located. The Properties for the shortcut iTunes icon is grayed out in the "find Target" box. I can find one copy of iTunes in the local c:\Programs\iTunes folder. Control Panel Add/Remove Programs list shows only one iTunes program. Is there any way to figure this out?iTunes: How to share music between different accounts on a single computer
http://docs.info.apple.com/article.html?artnum=93195 -
Can you have two separate iTunes files on one computer?
I gave my daughters each an old iPOD. One is 20 GB and the other is 60 GB. I take an iBOOK laptop with me when I visit so I can update them. In the past, they shared the 20 GB iPOD only. Now I have a problem as one iPOD can store a lot more than the other. Is there any way to have two separate iTUNES files on one iBOOK computer, one with the songs for the 20 GB iPOD, and the other for the 60 GB iPOD?
The problem with making separate accounts is that this is a laptop, so likely not a huge hard drive, and if the three iTunes libraries need to have a lot of the same music (because everyone or two or three like some of the same stuff) you end up with double or triplicate copies of the music on the hard drive eating up drive space. Since they don't use his laptop normally, creating more accounts (with all the associated files and drive space usage each account would eat up) it probably isn't worth it.
Instead, the best approach is like Chris said, to make playlists for the girls in the main library and then set up the various iPod to either sync everything (if big enough) or sync only specific playlists (if not big enough).
Alternatively, they can set their iPods to manual syncing and then when Dad is visiting they can hook up their iPods and "shop" the library and drag in whatever they want to add to the iPods and delete what they no longer want.
Patrick -
CAN YOU HAVE TWO I TUNES ACCOUNT ON ONE COMPUTER?
CAN YOU HAVE TWO I TUNES ACCOUNT ON ONE COMPUTER?
The problem with making separate accounts is that this is a laptop, so likely not a huge hard drive, and if the three iTunes libraries need to have a lot of the same music (because everyone or two or three like some of the same stuff) you end up with double or triplicate copies of the music on the hard drive eating up drive space. Since they don't use his laptop normally, creating more accounts (with all the associated files and drive space usage each account would eat up) it probably isn't worth it.
Instead, the best approach is like Chris said, to make playlists for the girls in the main library and then set up the various iPod to either sync everything (if big enough) or sync only specific playlists (if not big enough).
Alternatively, they can set their iPods to manual syncing and then when Dad is visiting they can hook up their iPods and "shop" the library and drag in whatever they want to add to the iPods and delete what they no longer want.
Patrick -
Hi, we have three iPhones and iPods which are currently linked to one apple ID. I have now set up an apple id for each phone/iPod. How do I go about re-directing the two accounts to the relevant one that has now been set up please? I could do with a step by step guide to follow as am worried about loosing aps, music, photo's etc which are on the individual phones.
Thanks
MandiOn each of the phones you're gonna use a new Apple ID for iCloud: turn off Contacts, Calendars, etc. for iCloud. You'll be prompted to keep the data or delete it from the phone, then turn off iMessage, FaceTime & delete the iCloud account...Settings>iCloud...scroll down...delete account. Then, setup iCloud using the new Apple ID, turn on iMessage & Facetime.
This will have no affect on the ID you share for iTunes content, & you can continue to do so. -
How do I set up two separate iTunes accounts on one MacBook Pro in order to manage the wife's iPhone and my iPhone (with separate info on each of course) ? Can this be done? A little step by step would be greatly appreciated; just short step by step though, I can follow fairly well.
Kindest Regards,
Phil T.You would each need to use your own user account on the Mac, you can do this at system preferences > users & groups.
Maybe you are looking for
-
Inexistent PC servers showing up in "shared" sidebar
since updating to SL, I have two new PC servers showing up in the sidebar's "shared" column. Both have cryptic names as "npi9f1b89". I do not have any Windows PCs in my office, it's a Mac only environment. However, I have only moved two iMacs to SL,
-
Itunes wont update on windows 7, ipod wont read on itunes
Hi, itunes wont update on windows7, and after unsuccesfull updates (several) now my ipod wont read on itunes, it does show up on windows as a driver, have researched this a lot ,getting weary now..have deleted affliliated apple files etc , reinstalle
-
HI, Iam doing IDOC to SOAP scenario....i have imported IDOC and recever side structure. Receiver side structure: Component 1..1 node1 1..1 node2 1..1 item 0..9999 node1 1..1 node2 1..
-
user created a stored procedure in one database and got "unable to execute stored procedure from database name blah blah", copied the stored procedure to another database and user could then execute it. User has exactly the same mapping in both datab
-
I have domains in my Verizon online Email and these are Emails are trapped by spam detector anyway. I just entered the domain name (i.e. blap.blap.com, for example). Is there a secret to making this work, or is it just buggy? Do I need to enter a wi