Two Users, One Shared Library, and iPod keeps being "reset".  Help.

My wife and I share the same Mac Mini. We have separate accounts, but use the same iTunes Library, which is on a shared volume. (This is a separate hard drive where all our music is kept.)
Here's the problem: Tunes keeps asking me to reset my wife's iPod every time I log in and open iTunes. Specifically it says "this iPod is linked to another library, do you want to overwrite..." etc. Interestingly enough, this does not happen with my Nano, which is also connected to the computer.
FYI, we each have our own playlists set up; does this indicate that our library is in fact not shared? The path to the music itself is the same as per the iTunes preferences...
Thanks!

Actually, I just figured out the answer to my own question. Apparently this is not possible with the shuffle. I don't know how to cross-post on these boards, but if anyone else is interested the relevant thread can be found by searching for:
iPod shuffle is linked to another itunes library

Similar Messages

  • I have set up two users, one for myself and one for children.  The computer automatically logs in for the children with no password required.  When the children go to spotlight and type in a search criteria all of my files show up.  How do I prevent this?

    I have set up two users, one for myself and one for children.  The computer automatically logs in for the children with no password required.  When the children go to spotlight and type in a search criteria all of my files show and open up.  How do I prevent this?

    Log in to your account, and move all your files to your home folder. No other users should be able to access them there and they won't show up with a Spotlight search.
    Make sure your kids' account(s) do not have admin privileges.

  • One Mac, Two Users, One shared Aperture Library

    Hello
    I recently bought a new DSLR camera. As the camera is much more advanced comapred to my former one I also wanted to improve my editing capabilties by switching from iPhoto to Aperture.
    I (USER 1) started Aperture, created a new library in the same directory my iPhoto library is stored in, chose "Import -> iPhoto library -> keep files in the original location"...a couple of hours later the library was indexed and usable.
    Now I wanted to take the next step. To optimize disk storage and to avoid duplicates the iPhoto library was used by two users, the imports, edits... one user made were available to the other user (on the same Mac) and vice versa. The idea was to do the same under Aperture. So USER 1 assigned "read & write" rights on my library file to USER 2 as well (as I said, file is stored in the same location as the iPhoto library where 2 users, 1 library already worked). I signed in as USER 2, started Aperture and first had to create a new library file. Then I changed the library file to USER 1's (shared) library. This worked in prnciple, however "Projects", "Faces"... were not displayed. Aperture showed as many blank fields as USER 1's library contains pictures. Some pictures were displayed after a couple of minutes but the system didn't appear as if it would also try to make the remaining pictures available. So I checked access rights on the library file again (USER 2 had all rights required), closed Aperture on USER 2, reopened Aperture under USER 2 and got the message, that access rights are not sufficient to access the library file of USER 1.
    What am I doing wrong? Could it be that what is possible under iPhoto (2 users, 1 Mac, 1 shared library file) is not possible under Aperture?
    Thanks for your help in advance.

    Update:
    I installed Windows via Bootcamp, added a second partition to the system. It worked, Windows took ages to download all the required updates but anyway, it worked. So I started up again with OS X Lion, now splitting my OS X partition into two (than had 2 OS X and 1 Windows partition) and adding all my iTunes content to the second. Then I created a new Apperture libary on that second partition, imported all the projects into it and, hey, it worked as well, no files showed "unsupported file format" anymore. So I thought I was through it all...but only until I tried to start from the Windows partition again, it didn't work. Under OS X I could see the Windows partition and all it's content, however the Bootmanager didn't provide the option to startup with Windows. So I had to clean the second OS X partition again, deleting the Bootcamp partition and then doing all the painfull Windows installation again. Now I'm at the point where I have 1 Mac OS X Lion partiton and a Bootcamp partition containing Windows 7...
    Now my question: Could it be, that Bootcamp 4 under OS X lion can not run Windows on another partition than the second one? In other words: If I now split my OS X partition into two to have all the iTunes and Apperture content on this second partition, will the third partition (Bootcamp) again not work anylonger? The Bootcamp help is not very precise in this point, it only talks about the installation process of Windows 7 that is only running when there is only one OS X partition, it does not at all say that - after installing Windows on the Bootcamp partition - the OS X partition must not be changed to prevent Windows from "dying". Does anyone out there have any experience on this, what will happen if I now split my OS X partiton into two with the second partition only containing iTunes and Apperture content and "ignore ownership" enabled? WIll Windows die again or did I do something wrong with my first try?
    Thanks for your help in advance.

  • Two Users, One iPhoto Library?

    My wife and I are both set up as separate users on my iBook because we both like various things set up a bit differently (browser bookmarks, dock items, etc). However, we would really like to share a single iPhoto (2.0.1) library. It's kind of a pain that, every time that I import our camera contents, the photos end up in my library, and every time that she imports the camera contents, the photos end up in her library, and there is no easy back and forth between the two collections.
    Is it possible to set up iPhoto to import to a single library that we both have read/write access to? I've done this in iTunes (it's quite easy in that program, as you can manually set up the location of your iTunes library in the iTunes preferences), but I can't quite figure out if it's possible to do this in iPhoto.

    I don't have an "ignore permissions" option
    Then you're not looking in the right place.
    Select the networked volume and choose "Get Info..." from the Finder's File menu. Open the Ownership & Permissions disclosure triangle and you'll see the Ignore Permissions checkbox at the bottom of the window.
    Having said that (and based upon the little I've observed thus far in this thread), I would suggest you give serious consideration to Peter's suggestion - create another user that both of you will use for your photos. The early versions of iPhoto were intended to be single-user applications, and I'm confident that you will encounter some unintended consequences by trying to use iPhoto in a way it wasn't designed.
    Message was edited by: Brie Fly

  • When i bought my new iMac recently i transferred all my photos from pc to iPhotos  then i recd an update that gave me Photos  how do i combine the two into one photo library and which should i choose?

    When i recently bought my new iMac, i transferred my photos from the old pc.  then i recd an update which introduced the Photos...so now i have two photo repositories and i only want one.  how do i get them together and how can i easily find duplicates to delete?  and which library should i choose.

    When you launch Photos for the first time it will import all of your photos from iPhoto. iPhoto is going away eventually and Photos is the replacement. For the time being both apps will remain on your system but you should start using Photos exclusively for the future.

  • Deleting podcasts from iTunes library AND iPod?!? HELP.

    I have 61 podcasts on my iPod and in my iTunes library.
    I didn't want them anymore, so I unsubscribed and deleted the podcasts from iTunes.
    I synced to my iPod, assuming that the files would be automatically removed.
    But they weren't.
    I've tried checking and unchecking "Sync only checked songs and videos" on the iPod device page.
    I've tried checking "Sync all episodes of:.." and then not checking any podcasts.
    It's not worked so far. My iTunes is up to date and everything..my iPod charged..
    Im wondering HOW do you delete podcasts - or any other music, videos...etc - from your iPod and iTunes?
    Please help! Reply soon, I'm in desperate need.
    Thanks.

    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    It appears that the mess resulted in the iPod seeing the computer/iTunes library as a new computer/iTunes library. If you sync to a new computer your iPod gets erased and the media in the iTunes library ends up on the iPod.

  • HT4859 I keep getting a MSG that my device has not been backed up. Going thru manage iCloud I see ther are two backs (one for cell and iPad). They both say "incomplete ". If I delete them cloud backups will stop and I assume I will need to go back to the

    I keep getting a MSG that my device has not been backed up. Going thru manage iCloud I see ther are two backs (one for cell and iPad). They both say "incomplete ". If I delete them cloud backups will stop and I assume I will need to go back to the control.
    Has anyone else experienced this?

    After deleting the backups, go back to Settings>iCloud>Storage & Backup and make sure iCloud Backup is set to On (if not, turn it on).

  • Have two users one is a test one is mine all the sudden mine lost the applications folder and now when i open my user it opens but wont respond to anything and i have to power it down and restart any clues

    I have two users one is mine, one is a test i set up with apple care. Everything was working fine then i lost my applications folder icon on my user. I have been using the Finder to open applications, now when i open my user the mouse travels but i'm not able to get a respond from anything ,it's almost like its frozen. I have power off and restart and use the test user. Anyone have a clue or any ideas?

    You can find the serial number either in About this Mc in the Menu bar under the , or it should be on a sticker under the foot of the machine.
    If you have the install discs, try booting from them, holding down the c key and then using Disk Utility to check the drive. 
    You can also boot into Safe mode
    To start up into Safe Mode (to "Safe Boot"), do this:
       1. Be sure the computer is shut down.
       2. Press the power button.
       3. Immediately after you hear the startup tone, press and hold the Shift key.
          Tip: The Shift key should be held as soon as possible after the startup tone but not before.
       4. Release the Shift key when you see the gray Apple and progress indicator (looks like a spinning gear).
    During the startup in Mac OS X 10.2 through 10.3.9, you will see "Safe Boot" on the Mac OS X startup screen.
    During the startup in Mac OS X 10.4 or later, you will see "Safe Boot" on the login window, which appears even if you normally log in automatically.
    Please post back with results,
    To leave Safe Mode in any version of Mac OS X, restart the computer normally, without holding any keys during startup.

  • I have two acounts one my pc and trying to transfer my itunes library from one acount to another and thoughts on how

    i have two acounts one my pc and trying to transfer my itunes library from one acount to another and thoughts on how

    Hi there,
    You may find the article below helpful.
    iTunes: How to share music between different accounts on a single computer'
    http://support.apple.com/kb/HT1203
    -Griff W.

  • HT203175 I had to reinstall Itunes and my library and ipods did not reinstall how do i get these back?

    I had to reinstall Itunes and my library and ipods did not reinstall how do i get these back?

    Hello DHolland1
    You can do one of two things, first is to locate the songs on your computer by looking in the iTunes Folder. Once found then drag and drop them on top of iTunes to import them in. The second option is to revert back to a previous version of your iTunes library to get the data back before you installed. The articles below will assist with those steps.
    Where are my iTunes files located?
    http://support.apple.com/kb/ht1391
    No content shows up in iTunes after updating
    http://support.apple.com/kb/TS1967
    Regards,
    -Norm G.

  • Ihave 51 iphoto library and they keep increasing and i do not know why

    My iphoto has 51 libraries and they keep increasing and i do not know why, i would like only one iphoto library and consolidate all photos in that.

    If you're using an IMAP account, also check your other devices to be sure you don't have some filters or rules set up that either delete or move emails to subfolders. You can see all Emails on your iPad, but displaying the sidebar showing Mailboxes, tapping the email account you are having trouble with (NOT the Inbox, but the section below), then tapping All Mail or something similar depending on your provider.
    If the mails are there, they are somehow being moved by one of your mail clients or by a rule you set up with your provider.

  • TS3694 Error message when attempting to back up iPod to iTunes, no number given. No previous back ups as a new user, current iTunes software and iPod iOS.

    Error message when attempting to back up iPod to iTunes, no number given. No previous back ups as a new user, current iTunes software and iPod iOS.

    The issue you are experiencing is with installing the latest iTunes update.  I recommend following the steps below:
    Resolution
    Follow these steps to resolve the issue:
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    I understand that you have already uninstalled iTunes, but when you get to this step, it is important to uninstall iTunes and the related components in the order listed in the link for that step. 

  • Two user with same profile and role having different authorization

    Dear All,
    I have very strange case of authorization . We have a new abap developer in our company . Her profile as copied from an exiting abap developer's profile in Development system. But she don't have authorization for lot of transaction that the existing user have. I checked the profile tabs , role tabs . then done the user compare for all the roles , but of no use.
    I did a compare of the two uses using S_BCE_68001430 and could see is that the existing abap user is having authorization starting with T_PXXXXXXXX that is giving him extra rights. These authorization is not present in any of the existing role he is assigned to (checked using S_BCE_68001396). The authirsaction in the roles start with T-DXXXXXXXX
    Will appreciate if any one can give any input . The problem is i need to assign each authorisation the existing user having manually to the new user.
    regards
    Tony

    Thanks for the mail.
    I check the "Reference User for Additional Rights" -- there is no refernce user assgined.
    I checked the table USR04 the no. of Profle for the two users are diffrent and in the table UST04 also the the existing uer is having addtional profiles.
    I like to add one more point Some of the roles of the  two users are composite roles and both the composite and its orignial roles are included the profile of both users.
    Does any one have idea of the authorisations starting with T_PXXXXXXXX
    regards
    tony
    MANDT BNAME          PROFILE    
    100   CHARLHO        B_LSMW_ALL 
    100   CHARLHO        T-D1780054 
    100   CHARLHO        T-D1780057 
    100   CHARLHO        T-D1780058 
    100   CHARLHO        T-D17800581
    100   CHARLHO        T-D1780075 
    100   CHARLHO        T-D17800751
    100   CHARLHO        T-D1780086 
    100   CHARLHO        T-D17800861
    100   CHARLHO        T-D17800862
    100   CHARLHO        T-D17800863
    100   CHARLHO        T-D17800864
    100   CHARLHO        T-D1780087 
    100   CHARLHO        T-D1780088 
    100   CHARLHO        T-D1780247 
    100   CHARLHO        T-D1780304 
    100   CHARLHO        T-D1781182 
    100   CHARLHO        T_P0920411 
    100   CHARLHO        T_P09204111
    100   CHARLHO        T_P092041110
    100   CHARLHO        T_P09204112
    100   CHARLHO        T_P09204113
    100   CHARLHO        T_P09204114
    100   CHARLHO        T_P09204115
    100   CHARLHO        T_P09204116
    100   CHARLHO        T_P09204117
    100   CHARLHO        T_P09204118
    100   CHARLHO        T_P09204119
    100   TESTUSER2      B_LSMW_ALL 
    100   TESTUSER2      T-D1780054 
    100   TESTUSER2      T-D1780057 
    100   TESTUSER2      T-D1780058 
    100   TESTUSER2      T-D17800581
    100   TESTUSER2      T-D1780075 
    100   TESTUSER2      T-D17800751
    100   TESTUSER2      T-D1780086 
    100   TESTUSER2      T-D17800861
    100   TESTUSER2      T-D17800862
    100   TESTUSER2      T-D17800863
    100   TESTUSER2      T-D17800864
    100   TESTUSER2      T-D1780087 
    100   TESTUSER2      T-D1780088 
    100   TESTUSER2      T-D1780247 
    100   TESTUSER2      T-D1780304 
    100   TESTUSER2      T-D1781182

  • HT1386 How do I switch users on wifi sync for example my Mac has two users one apples MacBook pro the other is my name I want to switch from apples MacBook pro to my name how is this done?

    How do I switch users on wifi sync for example my Mac has two users one apples MacBook pro the other is my name I want to switch from apples MacBook pro to my name how is this done?

    Try connecting the iPad to the computer that you do not want to WiFi sync with and uncheck the WiFi sync option in iTunes. Then click on Apply. Reboot the iPad and see if that does the trick.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • Songs have disappeared from my library and Ipod.  I have found some in trash but I did not send them there.  Others have completely gone.

    Hi - I have discovered that some songs have disappeared from my itunes library and Ipod. I have found some of them in trash even though I did not trash them, as they are some of my all time favourite songs.  I have now restored these trashed songs to my library/ipod. 
    However I cannot find some other missing songs in trash - so I have no idea where they could be! It makes me feel very insecure about itunes as a whole.  I would prefer music to diamionds - and it disturbs me when music just disappears like that!  An explanation/solution would be gratefully received.  I wonder whether I can ask Apple to pay for the items that have gone for good!

    Andrea,
    have you tried to update the Ipod? If not try that, but do not restore it. If you still cannot find the songs, there is - I suppose you are using windows - a nifty little program available from Findley Designs (www.findleydesigns.com) that allows you to transfer Music from your Ipod to your PC. Download it and see if it works with one song, if it does it is about USD 14 to buy and helps if you want to transfer songs from your Ipod to your computer. If you have transferred the music to your computer you can restore your Ipod-
    Good luck
    Thomas

Maybe you are looking for

  • Procedure is taking too much time

    I have simple shell script, in this shell script I am executing stored procedure. It should have taken 10 minute. However, this process running since last 5 hours. I don't know why the process is taking that much time. I don't want to kill this proce

  • Show data of a listitem in a popover window

    Hi Experts, I am trying to show the data of a listitem in some input fields which are in a popover window. After clicking on the listitem the data of that listitem will automatically appear on the popover window.  I am using sap.m library. I have cod

  • Problems downloading app

    I am having problems with my apple ID. When I try to download anything at apple store, it opens sthg saying that the update is not available with this apple ID... What should I do?

  • Chart of Accounts idoc

    Hi, Could you please let me the idoc related to chart of Accounts, or idoc which uses tables SKA1 and SKB1. Correct answer would be rewarded. Thanks, Nagendra.

  • A720 critical process died HELP!!

    Hi, I have a problem with my lenovo A720 and it is an upgrade to windows 8 from windows 7 pro. Now, the computer won't even turn on because of the BSOD of windows 8, the critical process died. It just keep restarting when it reaches the windows 8 log