Two versions for the same driver?

It´s absolutely odd,but Nvidia has a 52.16 Windows XP driver and no 52.14,while in MSI site,there is only the 52.14(it is the original driver).3DMark 2003 said that the only approved driver is 52.16.But my perfomanceare cleary worse in this driver than in a no WHQL driver.What´s the use for a certified driver?
But oddest of all,I installed the 52.16 driver for Nvidia,but still could use the DOT function,even it was not a MSI driver.Should 52.14 be a modified version of 52.16?

danieljf,
Do not worry about what MSI does, just keep using the  nVidia ForceWare Drivers  
Take Care,
Richard

Similar Messages

  • HELP! How to install two versions of the same driver???

    Hello,
    Here is my scenario... I am a video chat host on different sites. I recently purchased two of the same Creative Live! Ultra webcams. When I try to broadcast on the 2nd site with the 2nd camera the other goes fuzzy and starts freaking out.
    Is there a way to install two versions of the driver and run both cameras at once without conflict? Please advise what to do since I would like to use these cams.
    Thank you for your help.
    Tara

    tara2nz wrote:
    Hello, Here is my scenario... I am a video chat host on different sites. I recently purchased two of the same Creative Live! Ultra webcams. When I try to broadcast on the 2nd site with the 2nd camera the other goes fuzzy and starts freaking out. Is there a way to install two versions of the driver and run both cameras at once without conflict? Please advise what to do since I would like to use these cams. Thank you for your help. Tara
    Hi, i don't know the aswer but i've the same question. I'm about to get 4 webcams, I think live! Ultra is the best model in market but i've to be sure if there's a way to plug 4 webcams together.
    Thank's for all.

  • When I OCR two versions of the same document and then compare th documents in Acrobat Pro XI, I usually get the message that there are no changes to mark.  However, I know there a quite a few number of changes.  I raised this question more than a year ago

    When I OCR two versions of the same document and then compare the documents in Acrobat Pro XI, I usually get the message that there are no changes to mark.  However, I know there a quite a few number of changes.  I raised this question more than a year ago, and the response I received had to do with the quality of the OCR and the scans of the documents.  However, if I use Acrobat Pro XI to save the same documents in Word and then run a comparison in Word all of the changes are marked.  When a PDF is saved as a Word document in Acrobat Pro XI, is a different OCR module being used than the one used in Acrobat Pro XI for text recognition?

    OCR is only for recoginition of the image / picture of text provided by an scanner.
    Content typed into a Word file which is converted to a PDF is (in Word and in PDF) *not* an image  or picture of text - it is the digital text. So, no OCR involved.
    When the "digital" (renderable) text of a PDF's page content is exported to Word no OCR is involved.
    When a PDF's content is from the image output of a scanner and this is a picture of text then OCR comes into play.
    If this content is exported to Word before doing OCR then it is the image that is exported to the Word file.
    Once OCR is performed it is the OCR output that is exported.
    OCR output is (always will be) impacted by "the quality of the OCR and the scans of the documents". 
    Regardless "Compare" is based on a Word file output to PDF1 then edits to the Word file followed by an output to PDF2. You use Acrobat Pro to do a compare of PDF1 & PDF2.
    Paper 1 scanned to image 1 to image 1 in PDF1 that gets OCR 1 and
    Paper 2 scanned to image 2 to image 2 in PDF2 that gets OCR 2
    being processed with Acrobat Pro's Compare can certainly be done.
    But - well you've described what can be observed.
    Be well...

  • I downloaded two versions of the same album by mistake can I get a refund on one?

    I downloaded two versions of the same album, one staight after the other, I've been charged for both, can I get one removed and a refund?

    Carol,
    William Lloyd said it all, but perhaps Kirby Krieger's User Tip will explain a bit more the different uses of albums and projects:
                       The Well-Trod Path: a Beginner's Guide to how Aperture's major parts inter-relate
    Then I imported into Aperature, created new versions, one for each snapshot, then cropped each snapshot, so each snapshot is seperate in Aperature.
    You want to find each snapshot separately in Aperture? Perhaps you could explain more, how you want to organize your photos. William pointed out albums to group versions of an image. You could also assign keywords to mark special occasions like birthdays, weddings, etc.  You could assign faces to find photos of persons by name. You can use the search field in the browser to search for photos by face, date, keyword, etc.  Aperture is really great for accessing images in many different ways. There must be a way to access the images in your Aperture library just like you want to.
    Then, I tried to organize the ton of photos into projects and it won't let multiple versions of the same original photo be in separate projects.
    That is, how Aperture works. All versions of an image need to be in the same project, because they are sharing the same imported original image file. Aperture tries to save your disk space, by by not creating image files for the edited versions. Versions are just a set of instructions how to produce the rendered image, when you want to edit it or to export it. Unless you are working with the version, it will live in limbo and it will not exist as an image file. So all versions are kept together in the same project with the original image file that is necessary to render them as an image.
    Léonie

  • Use two indicators for the same variable in two different VIs

    hello, I want to use two indicators for the same variable in two different VIs running at the same time
    should I use global variables?? I want to avoid because I have lot of variables and it would takes too much memory,I tried with this code but the value of the second indicator is not updated 
    I tried to use the queue and it works but the problem is as i said previously that i have many variables shoud I use a queue for each one??
    what should I do?
    thank you in advance
    cordialy
    Attachments:
    projet.zip ‏13 KB

    CrisSTine01 wrote:
    hello, I want to use two indicators for the same variable in two different VIs running at the same time
    I'm a huge fan of User Events to send updates to GUIs from who knows where.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • Can we create two POs for the same 3rd party Sales Order?

    Hi MM experts,
    Issue: Can we create two POs for the same 3rd party Sales Order
    In Third party purchase process, first sales order created with a spl. item category  and it creates the PR automatically with the Sales order material and Qty and this PR converted PO.
    They got a pur.req. for sale order on same item for same delevery date. They did not get any warning msg. saying that a PO was prviously placed against this sale order.
    How it is possible that we were able to place another PO? concern is that second PO was palced against SO which was already used & completed. they were able to place 2 POs for the same customer same delevery date. How it is possible?
    If anyone face the same issue, please let me know if you have any answer to this questions.
    Thanks in advance.
    Suresh.

    Suresh,
    It is hard for me to give you a definitive answer since you have created a customized solution.
    How it is possible that we were able to place another PO? concern is that second PO was palced against SO which was already used & completed. they were able to place 2 POs for the same customer same delevery date. How it is possible?
    Normally, the system will not do this.  A third party PR or PO will be 'account assigned' to the Sales order.  SAP standard 3rd party will not create additional purchase reqs unless there has been manual intervention.  Try searching for changes in the Sales order and changes in the original purchase order.  They may give you a clue.
    I believe the normal Item category for third party SO is TAS (I am working from memory here, I am not in front of a system).  I don't know what ZTAG does.  I confess I am not an SD expert.  You might also want to post your question in an SD forum.
    You mention two custom applications, ZMMPLAN and ZSTPMP.  These somehow have functionality that is used to help you convert your PRs to POs.  If I were in your position, I believe I would also look at these applications for clues to how they might be contributing to your problem.  And please don't send me details about these apps.  I will not comment on custom code in this forum.
    Sorry I can't be of more help.
    Rgds,
    DB49

  • Post a witholding tax in two countries for the same vendor

    Hi all,
    I would like to know if there is any way (standar not development) to post a witholding tax in two countries for the same vendor belonging to a company code. (extended witholding tax scene).
    System always display extended witholding indicators belonging to the country of the company code.
    Thanks in advance.
    Emilio Rozalén
    SAP FI Consultant.

    Hi B.Rama,
    I think so, but Do you know the meaning of country witholding field in vendor master?.
    Besides you can find this field in customizing, reports but I dont know its functionality.
    Thanks and regards
    Emilio Rozalé

  • I was charged two times for the same game

    I was charged two times for the same game...how can I get my money back?  I even was emailed a receipt for them both...no one noticed?  Please help me.

    How to report an issue with Your iTunes Store purchase

  • Why are there two prices for the same audiobook?

    Why are there two prices for the same audiobook in iTunes?

    May be one is abridged and one unabridged ? or they just may want to get the suckers that think the more expensive one is better ... haha.

  • Urgent: two authors for the same book

    I have a database with three tables: books, authors and aux.
    The books table stores the names of the books. The authors table stores the name of the authors. Table aux takes the id of the other two. I did this for the case of the same book has two or more authors
    The query I did was the following:
    SELECT authores.author, books.title
    FROM aux, authors, books
    WHERE aux.books_id = books.id AND aux.authors_id = authors.id
    ORDER BY books.title ASC
    How do I show the two authors for the same book?
    For now, I'm using a simple table:
    <table border="1" cellpadding="1" cellspacing="1">
      <tr>
        <td>author</td>
        <td>title</td>
      </tr>
      <?php do { ?>
        <tr>
          <td><?php echo $row_rsBooks['author']; ?></td>
          <td><?php echo $row_rsBooks['title']; ?></td>
        </tr>
        <?php } while ($row_rsBooks = mysql_fetch_assoc($rsBooks)); ?>
    </table>
    Thus, the table presents two results for the same book, instead of uniting the two authors of the same book.

    Thanks for the reply.
    In the meantime, got what I wanted. The expression looks like this:
    SELECT livros.titulo, GROUP_CONCAT(autores.autor SEPARATOR ',') AS Autores
    FROM livros INNER JOIN aux ON aux.livros_id = livros.id INNER JOIN autores ON aux.autores_id = autores.id
    GROUP BY livros.titulo

  • Two infopackages for the same DS-- IS combination initialised

    Hello Friends,
    Can we have two infopackages for the same DS-->IS combination initialised with the same selections conditions and init requests. I have seen this in my client system. How can this be achieved.
    Thanks for your help.
    ---Simmi

    That is not possible.
    Are you sure Inits were done for same selections ???

  • Two files for the same version

    Hi All,
    After created a document and uploaded a version (the original version in the content server), I should want to upload another file (the "printable version" in pdf format) without loose the previous version (the original). Therefore I want to know if is possible to have contemporary 2 files for the same version of the document.
    I saw in the CFF_PHIO table there is the class CFF_ADDFIL in the field "PH_CLASS": is useful for my goal?
    Thanks for any reply.
    Massimo

    That is not possible.
    Are you sure Inits were done for same selections ???

  • Two Tracks for the same Runtime System?

    Hello,
    can you please tell me if it is allowed to connect two tracks to the same runtime systems?
    We have already a track connected to our systems. Now we have created a new track to deliver different content to those systems. We wanted to connect the new track to the same runtime systems. Our basis team told me that a where-used message came up that told them "The following runtime systems are already used elsewhere in the CMS domain".
    Can you tell us if we will get problems because of this?
    Thanks in advance,
    Br,
      Michael

    Hello again,
    ok now, thats something completely different CRM modification is always special.
    To be honest i cannot tell for sure what will happen. As far as i know the default deploy strategy of NWDI is "deploy any version" which means NWDI will order SDM to just deploy not regarding any SDM Version (you are on a 7.0x System right?)
    So it should be possible if everything else, excelt those 2 DCs is the same things should work. But if not the last deplyoed version of the shared DCS will be active. Which might lead to problems then.
    As far as you described, the setup is as the CRM modification guides mentioned.
    My first thought is that you are not forced to use CUSTCRMPRJ as SC name for the projects as far as I know. OS maybe the leanest thing would be to just use CUSTCRMPRJ_light (.o)) for the second track.
    Hmmm not sure if this is a good idea or thought to the end. I don't have the CRM modifications guide at hand at the moment. But I guess there was a part where something was mentioned similar to this.
    After all I have to say:Sorry. I can't give you solid, reliable tip/advice for this case. Maybe my thought will help you.
    Or maybe someone else knows better.
    Have a good time
    Jan

  • Can I have two versions of the same original live in separate projects?

    I am not an Aperature or photography expert.
    I scanned in a ton of old family photos with multiple snaphots on a page and in a single file. Then I imported into Aperature, created new versions, one for each snapshot, then cropped each snapshot, so each snapshot is seperate in Aperature. (I could have learned Spanish with all the time that this took.)
    Then, I tried to organize the ton of photos into projects and it won't let multiple versions of the same original photo be in separate projects. I found a way to change the filenames through Batch Change, but that didn't fix the problem.
    I would like to organize the ton of files, but from what I can tell my only option would be to go back to the scanned files, make copies from Finder as needed, once for each snapshot, reimport into Aperature and recrop each individual snapshot.
    Oh my, I have kids and a job and a husband and I like to sleep at night. Is there any easier way to organize the photos?
    Thank you for your time.
    Carol

    Carol,
    William Lloyd said it all, but perhaps Kirby Krieger's User Tip will explain a bit more the different uses of albums and projects:
                       The Well-Trod Path: a Beginner's Guide to how Aperture's major parts inter-relate
    Then I imported into Aperature, created new versions, one for each snapshot, then cropped each snapshot, so each snapshot is seperate in Aperature.
    You want to find each snapshot separately in Aperture? Perhaps you could explain more, how you want to organize your photos. William pointed out albums to group versions of an image. You could also assign keywords to mark special occasions like birthdays, weddings, etc.  You could assign faces to find photos of persons by name. You can use the search field in the browser to search for photos by face, date, keyword, etc.  Aperture is really great for accessing images in many different ways. There must be a way to access the images in your Aperture library just like you want to.
    Then, I tried to organize the ton of photos into projects and it won't let multiple versions of the same original photo be in separate projects.
    That is, how Aperture works. All versions of an image need to be in the same project, because they are sharing the same imported original image file. Aperture tries to save your disk space, by by not creating image files for the edited versions. Versions are just a set of instructions how to produce the rendered image, when you want to edit it or to export it. Unless you are working with the version, it will live in limbo and it will not exist as an image file. So all versions are kept together in the same project with the original image file that is necessary to render them as an image.
    Léonie

  • I pre-ordered two versions of the same album on ITunes! How to stop?

    So a few minutes ago I accidently preordered 2 versions of the same album on Itunes on my dell laptop! I want to cancel one, but i dont know how! It told me that you pay for it when it is realsed in November so I have not payed yet for either.

    Select all the songs from the album, choose File--> Get Info, then under the Album area, type in the appropriate album title.  They should all appear under one album at that point.

Maybe you are looking for