Two versions of time-dependant hierarchy?

Hi,
Is it possible to have 2 versions of time-dependant( entire hierarchy) .. if yes how... Thanks

Hi,
transaction RSD1.
Change your InfoObject.
Select TabStrip Hierarchy
Switch on the flags:
-with hierarchies
-Hierarchy is version dependent
- entire hierarchy is time-dependent
So this means it is possible. But I have never heared about a need of both in the reporting.
Kind reg.
Michael

Similar Messages

  • 0ORGUNIt time dependent hierarchy not showing all valid nodes in BO , but in BW its correctly shown

    Hi All,
    We have 0ORGUNIT hierarchy shown in one of the Webi reports. 0ORGUNIT is time dependent hierarchy.
    In BW report we can see below nodes for hierarchy
    Hierarchy                     Valid From         Valid To
    Z05 Root Company        01.07.2013        31.12.9999 - Parent node
        Z05 Branch 2                 01.10.2013        31.12.9999 - Child Node
        Z05 Division                   09.12.2013        31.12.9999 - Child Node
    In BO webi we can see only two nodes
    Z05 Root Company        01.07.2013        31.12.9999 - Parent node
           Z05 Division                   09.12.2013        31.12.9999 - Child Node
    Any idea why in BO webi the other node is not shown ? This is happening only for time dependent hierarchy and only in BO not in BW.
    Thanks,
    Shraddha

    Hi Shraddha ,
    Check at webi query panel level any restrictions applied to hierarchy levels.
    Check at BEx query level,select 0ORGUNIT ,hierarchy -Expand to level .
    Here specify Max level.
    lastly, check any filters/restrictions applied on data.If yes,remove restrictions.

  • 0CS_Item with time-dependent hierarchy

    Dear Experts,
    we are discussing pros and cons for a time-dependent item catalog (characteristic 0CS_item with time dependent hierarchy in BW) within consolidation SEM BCS 4.0. Does anybody has experiences on this topic?
    I am quite sure it will be a performance issue and it means additional reporting effort (e.g. using reference period/year in the report comparing different hierarchies).
    I am not sure if there are any other risks so I it would be great if anybody has some hints.
    Thanks in advance,
    Birgit Laux
    Message was edited by: Birgit Laux

    Birgit,
    Some other things to consider:
    - frequency of changes to item hierarchy. Could lead to a lot of item hierarchies in BW over time.
    - hierarchy validity date does not seem to be displayed when running web queries and thus makes it difficult for the user to select the correct hierarchy when executing the query. Still looking for a fix for this.
    - greater complexity in overall design. Is it really necessary to achieve correct financial statement presentation?
    Virtual cube performance is not great but you could implement the data mart which provides typical BW query performance.
    I stayed away from setting the item as time dependent for these reasons.
    Brian

  • Creation of Time Dependent Hierarchy in R/3

    Any ideas on how to create a time dependent Hierarchy in R/3?
    Do we have any existing functionality we can leverage in R/3 for creating and maintaing time dependent hierarchy or through ABAP coding in R/3?
    Any ideas or documentation will be helpful.

    Hi Jasmine,
    check this documents/links to get an idea how to set up hierarchy extractor in R/3
    [How to Create a Hierarchy Extractor for Employees and their Department Managers|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20a709c1-0a8e-2a10-21b4-f779728c63bf]
    Re: Build Hierarchy with ABAP
    How to create datasource for hierarchy
    Double post: Creation of Time Dependent Hierarchy in R/3
    Regards
    Andreas

  • Time dependent hierarchy structure in SEM-BPS

    I want to use a time dependent hierarchy structure in sem BPS to make combination chek and proposal in a layout.
    I have manage a relation of type hierarchy (based on this hierarchy) in the characteristic relationship tab page of my planning area.
    I open my layout to make entries in the future (next fiscal year) but the system doesn't propose me the datas valide for the next fiscal year in my hierarchy but the datas validate today.
    There is a key date in the master data tab page of the planning area but it seems to have only effects on attributes with validity dates but not with hierarchy with time dependent hierarchy structure.
    Thanks for your help.

    Hi,
    The key data that you enter in the planning area is only for time dependent characteristics and attributes. For the hierarchies in the characteristic relationships the current data is used.
    If you still want to use a time dependent hierarchy for modeling the characteristic relationships you could use a characteristic relationship type exit. In the exit you can read the hierarchy with the proper date.
    Best regards,
    Gerd Schoeffl
    SAPNetWeaver RIG BI EMEA

  • Time-Depended hierarchy and BEx-Queries

    Hi Gurus, Masters,
    I have ONE time-depended hierarchy for 4 periods (times):
    1, 2, 3, 4
    I have 4 columns in Query with 4 periods:
    1 col for 1 period,
    2 col for 2 period,
    3 col for 3 period,
    4 col for 4 period.
    I have 1 row with this hierarchy.
    How can i share this hierarchy in my columns by validity:
    for 1 col -> this hierarchy for 1 period,
    for 2 col -> this hierarchy for 2 period,
    for 3 col -> this hierarchy for 3 period,
    for 4 col -> this hierarchy for 4 period?
    Any answer will be very appreciated.
    Thank you.
    Is this possible?
    P.S.
    I have 2 solutions found.
    Message was edited by: AndyML

    Hi Shashi,
    One of the ways:
    Create a variable type customer exit - in properties of the IO - in the 'select hierarchy' window there is a 'Variables' checkbox for key date.
    Calculate the last date of the entered period/year in the exit.
    Best regards,
    Eugene

  • Time Dependant Hierarchy in BEx

    Hi All,
    I have created a query on top of 0PS_C04.
    In my master 0Project i have a hierarchy which is being displayed through BEx.
    Now with every new fiscal year, new projects are added to the hierarchy.
    When I run the query then all the projects of the hierarchy are displayed irrespective of the year they belong to.
    My problem is that I want to display only 2009 related projects when i execute the report for 2009 and so on for the years that follow.
    Can somebody please suggest a way out???
    Thanks.
    Regards,
    Rohit

    Hi,
    Are you using option : Time dependent hierarchy or Entire hierarchy is time dependent. If it's the latter, then you can just restrict your query with the hierarchy having end date 31.12.9999. Using key date option is also convenient.
    --Akashdeep

  • Time dependent hierarchy creation in R/3.

    I know  you can do it in BW. Any ideas on how to do it R/3? Do we  have any existing functionality we can leverage in R/3 for creating and maintaing time dependent hierarchy.
    Any ideas or documentation will be helpful?

    Hi,
    check this threads:
    Custom Datasource for custom Hierarchies
    How to create Hierarchy data sources in R/3
    How to create a hierarchy datasource in R/3
    Double post: Creation of Time Dependent Hierarchy in R/3
    Regards
    Andreas

  • BPC 10.0 - Time Dependent Hierarchy?

    Dear All,
    In BPC 10, is time-dependent hierarchy allowed/used?
    Any pointers will be appreciated.
    Thank you!
    Regards,
    Peri

    Hi Peri,
    Please, read here: Time dependent hierarchy with BPC10 NW - Planning and Consolidations Use cases
    B.R. Vadim

  • How to achieve time dependent hierarchy in SAP BO Disclosure Management

    Hi all experts,
    We are proposing a SAP EPM solution to a client. The overall solution consist of a planning tool (BPC 10 NW) and a disclosure management tool (SAP Disclosure Management 10).
    The Disclosure management tool will retrieve the planning budget figure from BPC 10 NW, and consolidate into a financial statement.
    Understand that in SAP BPC 10 NW there is a new feature call "Time Dependent Hierarchy" which allows defining the hierarchies based on a time range and the roll up behavior will be different based on the time the data belongs to. However in Disclosure Management it is currently not supported as a standard feature, therefore is there any workaround solution to achieve time dependent hierarchy in disclosure management ?
    Thank you !
    Regards,
    Elvin

    Hi Elvin, did you get a solution to your question.
    Can you share it. Thanks

  • Time depend hierarchy of 0profit_ctr (set calday on EXIT_SAPLRSAP_004)

    Hi,
    I would like to set Time depend hierarchy (not by nodes, but all hierarchy) on the 0profit_ctr. but unfortunately, 0profit_ctr is not time depend. So I would like to add calday on the EXIT_SAPLRSAP_004(cmod) on the source system.
    But I am no idea how to code it...
    what I would like to do is to set DATETO and DATEFROM of the hierarhcy header.
    parameter of the  EXIT_SAPLRSAP_004 is below.
    *"       IMPORTING
    *"             VALUE(I_DATASOURCE) TYPE  RSAOT_OLTPSOURCE
    *"             VALUE(I_S_HIEBAS) TYPE  RSAP_S_HIEBAS
    *"             VALUE(I_S_HIEFLAG) TYPE  RSAP_S_HIEFLAG
    *"             VALUE(I_S_HIER_SEL) TYPE  RSAP_S_HIER_LIST
    *"             VALUE(I_S_HEADER3) OPTIONAL
    *"       TABLES
    *"              I_T_LANGU TYPE  SBIWA_T_LANGU
    *"              C_T_HIETEXT TYPE  RSAP_T_HIETEXT
    *"              C_T_HIENODE TYPE  RSAP_T_HIENODE
    *"              C_T_FOLDERT TYPE  RSAP_T_FOLDERT
    *"              C_T_HIEINTV TYPE  RSAP_T_HIEINTV
    *"              C_T_HIENODE3 OPTIONAL
    *"              C_T_HIEINTV3 OPTIONAL
    *"              C_T_MESSAGES STRUCTURE  BALMI OPTIONAL
    *"       EXCEPTIONS
    *"              RSAP_CUSTOMER_EXIT_ERROR
    I guess I_S_HIER_SEL seems to me the hierarhcy header. but I could not find which fields of the TABLES are corresponding this hierarchy header.
    Or is it impossible to set what I want to do on this exit?
    Hope your help..
    Kind regards,
    Masaaki

    Hi,
    In this FM EXIT_SAPLRSAP_004..
    see include program...
    INCLUDE ZXRSAU04..
    Write code
    data : l_s_[structurename] like [extractstructure name],
    l_tabix like sy-tabix.
    case i_datasource.
    when 'your datasource name'.
    loop at c_t_data into l_s_[structurename]
    l_tabix = sy-tabix.
    fill the new field
    select ... into l_zz...
    where ....
    l_s_[structurename]-[new field name, zz....] = l_zz...
    modify c_t_data from l_s_[structurename] index l_tabix.
    endloop.
    Hope this Help.. assign points...
    regards,
    raj

  • How to: from time independent hierarchy to time dependent hierarchy in BW

    Hello goeroes outthere,
    I am facing the following problem and was wondering if some of you have faced the same issue.
    In ECC we have a time independent hierarchy on Profit Center. Our customer wants to perform time DEPENDENT reporting in BW.
    As the standard datasource does not support to be loaded via PSA in the datasource definition (only IDOC) we cannot enhance the datasource with fields such as DATEFROM and DATETO. I've tried doing so but this results in the following error message when loading : Selected number does not agree with transferred number of records.
    So I have cancelled out this as being an option.
    I am analyzing the following two options :
    1. Making the hierarchy time dependent. (globally). The idea would be to create a custom ABAP program that would copy the loaded hierarchy to a hierarchy in which we define the datefrom as the actual system date and the dateto as 31.12.9999.
    Prior to doing so the abap program should change the already loaded hierarchy by modifying the dateTO as actual system date -1 in the header of the hierarchy.
    In theory this seems to be a good option, but I am afraid of the complexity of the ABAP program to be created by looking in debug how the copying process is handled in SAP. 
    2. Making the hierarchy structure TIme dependant. THis has as a consequence that the table  /BI0/HPROFIT_CTR is adjusted to include DATETO and DATEFROM fields. A custom program could read the entries and perform the same activities as described above. So meaning finding and modifying the existing entries with DATETO fields with as an entry 31.12.9999 to adjust to sysdatum -1 and modfying all entries that don't have dateto and datefrom entries by putting datefrom (=sysdate) and the dateto (=31.12.9999).
    The issue here is that first we need to find the link between the hierarchy ID and the Hierarchy loaded and that I am not sure how SAP will deal with this SID wise.
    Option 1 seems feasable as the hierarchy does'nt change every single day and doesn't require to be loaded every single day. But before going in this direction, I would appreciate some confirmation of my approach.
    Thanks in advance for sharing your lights on this topic.
    Rgds,
    Bvpe

    Hi Bart,
    I just solved this very problem today in a two step process:
    In our implementation, we only want to control when a new version of the hierarchy is created.  If nothing changes, whatever is brought in from the source system will just replace the current version.  We imagine we'll only create versions at month end or major re-organization.
    1) I created a Select Options variable in tcode: stvarv called ZPROFCTR_FROMDATE.  I added a value to the low position and set the option to equals.
    2) Open the infoPackage that is used to load the hierachy from the source system.  Go to the Hierarchy Selection Tab and click on the button at the bottom of the tabbed frame "Dynamic Hierarchy Selections".
    You should see two check boxes, place a check in the second box: "Determine Using Routine"  Click on the create icon and put this in the routine
      p_s_sel_hier = l_s_presel_hier.
      data: tempfrom type tvarv_val.
      select single low
      from tvarvc
      into tempfrom
      where name = 'ZPROFCTR_FROMDATE'.
      move tempfrom to p_s_sel_hier-datefrom.
      p_s_sel_hier-dateto = '99991231'.
      clear p_subrc.
    I've include the entire subroutine for context, and so you can see the SAP generated coments in the form that attempt to explain what the form is going to do.
    Long story short, the hierarchy you have selected with the radio button on the Hierarchy Selection tab will be the one that is affected by this logic.
    form compute_hier
      tables l_t_all_hier structure rshiertrsf
      using l_s_presel_hier like rshiertrsf
            l_infopackage   type rslogdpid
      changing p_s_sel_hier like rshiertrsf
               p_subrc like sy-subrc.
    *Insert Source Code to decide which Hierarchy shall be loaded.
    *The Hierarchy you select from table l_t_all_hier and fill
    *into p_s_sel_hier will be loaded.
    *The Structure l_s_presel_hier contains the pre-selection of the
    *BW-Scheduler - just to inform you what the BW wll load
    *if you change nothing.
    *$*$ begin of routine - insert your code only below this line        *-*
      p_s_sel_hier = l_s_presel_hier.
      data: tempfrom type tvarv_val.
      select single low
      from tvarvc
      into tempfrom
      where name = 'ZPROFCTR_FROMDATE'.
      move tempfrom to p_s_sel_hier-datefrom.
      p_s_sel_hier-dateto = '99991231'.
      clear p_subrc.
    *$*$ end of routine - insert your code only before this line         *-*
    endform.                    "compute_hier
    Hope this helps,
    Quack

  • Selection of time-dependent hierarchy variables after selection of time

    Hi guys,
    I'm having the following question regarding the selections of variables in a BEx Query:
    I need to select e.g. a position out of a hierarchy which is time-dependent. In the selection screen I'm only able to select a certain date but not the key date that I need for the hierarchy. Now I would like to replace the needed key date for the hierarchy out of the date value. Having the parameters for the hierarchy selected I would like to select a position of the right hierarchy.
    My idea is to select the date first:
    Date: 05.2009
    In the next pop up window the hierarchy key date is replaced by the date:
    Date: 05.2009 --> key date: 05.2009
    Now I can select a position for the right hierarchy.
    Is a two-stage selection possible? How can a variable be replaced and simultaneously serve in the selection of object with a hierarchy?
    Thanks in advance!

    Hi Partho,
    Please check this link. Might be helpfull.
    http://www.ibm.com/developerworks/data/library/cognos/infrastructure/cognos_specific/page551.html
    Regards,
    Rahul

  • Select key date of time-dependent hierarchy before select a hierarchy node

    Hello experts!
    I have a Web Application which has a selection on 0ORGUNIT (organizational unit). The selection is on hierarchy nodes and the hierarchy is time-dependent.
    Because of the time-dependency I have to give a key date for the hierarchy. But I want to select the key date at runtime/execution of the query and additionally I want to select the hierarchy node and other selection criterias.
    Maybe there is a solution to get all this in one pop-up or maybe in two or another solution how I can implement this requirement.
    Thanks for help!
    Peter

    Hey!
    You don't have to use the same presentation-hierarchy like  the selection-hierarchy is which you use for the variable. While presentation-hierarchy always has a key-date, the selection-hierarchy has none. So you see all values for selection but just this which are valid for the presentation-hierarchy are selected. And there is a warning which you can supress over RSRT.
    This solution works for our problem, maybe not for yours, don't know.
    Best regards,
    Peter

  • BIAUTH: Time-dependent hierarchy authorization in BI 7.0

    Hi folks,
    we got an authorization problem with time-dependent hierarchies.
    For example: Hierarchy A has DATETO 20100220 definied in BI
                          Hierarchy B has DATETO 99991231
    In our user authorization (BIAUTH) we have defined a node authorization, based on Hierarchy B like this:
    Hierarchy    PPS/99991231// [NAME OF IOBJ]                                    
    Nodes        679                                                                               
    Type of Authorization   1                                                 
    "Subtree Below Nodes"                                                      
    Hierarchy Level        0                                                 
    Validity Range         1         -
    >???  this should allow us key date-free selection ???                                        
    "Name and Version Identical"
    For evaluating the users authorization on the IOBJN in our own BI exit variable and FM we are using the SAP FM "RSSB_AUTHORIZATIONS_OF_USER".
    Despite the fact we call this FM with the wanted date (i_date), the FM does not return us the correct Hierarchy nodes desolved in s_tsx_auth_values_user.
    Is there any possibility to authorize on time-dependent hierarchies generally llike we did (Hierarchy B) and still get the key-date selected hierarchy at the time?
    Thanks a lot for any hint!
    Norbert

    Hi Norbert,
    Can you check that the SAP note 1301644 has been applied in your system.
    Best Regards,
    Des Gallagher

Maybe you are looking for