Two video cards issue

Any fix for the "Hardware cannot render at the requested size and depth" when having two video cards issue?

Now, the strange thing is: after a few initial issues one of the macs is doing fine. The second one, on the contrary, is a nightmare. Finalcut gives a green screen of death and hangs up suddenly while performing simple operations (like dropping a clip on the timeline).
I'm thinking of trying to replace the two video cards with an older single dual display card, and giving up the fancy lcd monitors (that i bought at vast cost), at least until apple issues an upgrade that adresses the two video card problem. <
If the machines are mechanically equal, it's obviously not the cards. Although you can only be absolutely certain if you swap the cards between machines and see if the green screen issue follows one or both cards.
However, that new LCD display and card combination doesn't have much time in the pipeline so there could be other issues and you're doing the beta testing for all of us. Blaming the reseller is pointless; no one can keep track of all of these issues. We only find out about them only because of reported failures.
You should research the "green screen" here on the forum. I do not recall if there are display or graphics cards issues associated with it. That seems unlikely. IIRC, it appears to be a QT issue.
bogiesan

Similar Messages

Video Card issues in WinXP - Left 4 Dead

Just wanted to see if anyone was having issues like I'm seeing in these two pics.
This first pics shows what appear to be polygon regions appearing out of no where.
http://i44.tinypic.com/2v146ep.jpg
And this 2nd pic shows spikes that appear mostly out of characters but on some objects as well.
http://i44.tinypic.com/vqhafk.jpg
Usually when I start playing everything is fine but after a 20min or so they will start to appear. Changing some video settings in the game (such as anti-aliasing or resolution) will usually make them disappear for a few minutes but they will then re-appear. My best guess is that this is due to the video card overheating as it doesn't happen right away, but that's just a guess. I tried installing 'speedfan' to increase the fan speed but it does not seem able to control the speed on the video card.
Also, I only have the drivers that have come with the bootcamp installation. On the forums it seems that it is recommended not to install other versions of the drivers so I have not at this point.
I'm running bootcamp (windows xp 32bit) on my MacPro 10.5.5 / 4GB ram (quad core Xenon) with the ATI-X1900. I have the latest 2.1 bootcamp installed. The game runs perfectly beyond these issues, although I do get the occasional stutter or audio repeat.
I don't have any of these issues on TF2.
Does anyone have any suggestions on a possible solution? or does anyone know of a way to control the fan speeds in Windows? In OSX I use smcFanControl to keep the machine a little cooler.
PS. I also heard that some of the ATI-X1900 cards had issues. Can anyone confirm this? If this is the case, can anyone recommend another card for my MacPro? I do occasionally get video card issues in OSX too while doing 3d work.
Thanks for any help!
Message was edited by: JeffrySG
Message was edited by: JeffrySG

Upon inspection of the card it is totally loaded with dust. I found this article:
http://macsaregreat.com/?p=63
which has some pics and this thread:
http://discussions.apple.com/thread.jspa?threadID=1265166&start=0&tstart=0
which discusses many issues as well with the X1900 and Leopard. I first started seeing issues with the card during my 3d work after I installed Leopard.
I'm off to the computer store to pick up some compressed air to try to clean that vent now. I already use smcFanControl already, before using it I was getting card errors every day.
Thanks again for the info regarding the dust on that card.
Jeff

G5 Video Card issue, or is it?

G5 video issue
G5 dual 1.8, 6 gig ram, OSX 4.11
AGP card ATI 9800 pro, 256 ram, rom: 113-A14402-116 DVI-D & mac DVI outs
PCI card burned for mac, ATI VGA 32 ram, rom: 113-85501-208
Monitor, KDS flat screen, vga/dvi, connected by dvi
Problem: if system sleeps or monitor sleeps, then monitor does not wake at all or wakes with vertical lines and no discernible images.
Set computer to “never sleep” but last time the problem occurred when the screen saver deployed.
It seems the usb/ keyboard is no longer responsive, can’t tell for certain.
Only way out is cold reboot.
Have cleaned inside, removed all but the two video cards. Normal diagnostics show nothing out of the ordinary, SYS & TechTool.
HOWEVER, when second monitor is connected to second card, problem does not emerge. Even if second monitor is off. When second monitor is disconnected from second card, problem returns.
Is this a MOBO card problem or video card?
If is video, can you recommend best replacement? Use is: graphics, Photoshop & Illustrator, & video editing.

Try reseting the PMU or SMU (power management), depending on Power Mac G5 model
http://support.apple.com/kb/HT1939 <- older model
<a class="jive-link-external-small" href="http://">http://support.apple.com/kb/HT1436 <- newer model

Two video cards at once problem

i just got an eGeForce 9600 GTX card and i put it on my MSI P6N SLI Platinum nvidia motherboard.
There are two PCI 16 Express slots. The card works fine alone but...
What i was hoping to do, was to run my old GeForce 7600 GT at the same time and run
two little monitors off it and then run my hi def tv and bigger monitor off the 9600.
My computer isn't recognizing the 7600...it's in there securely...i've pulled it out put it
back in etc...it was working totally fine before today so the problem isn't with the card...
While reading my book for my motherboard it says that i can't run two video
cards unless they are SLI linked. I don't want SLI...one 9600 is fine for video games. I want
four monitors...Has anyone heard of this? Is there any way around this?
anything I can try in the bios or anything like that? has there been a bios workaround for this
or anything? i've been googling around and found nothing. i've never heard of motherboards
that exclusively do this...what's the point?
..if they have two PCI 16 slots why not let them both work??
I'm running vista 64 bit...
any help soooo appreciated
thanks

Now, the strange thing is: after a few initial issues one of the macs is doing fine. The second one, on the contrary, is a nightmare. Finalcut gives a green screen of death and hangs up suddenly while performing simple operations (like dropping a clip on the timeline).
I'm thinking of trying to replace the two video cards with an older single dual display card, and giving up the fancy lcd monitors (that i bought at vast cost), at least until apple issues an upgrade that adresses the two video card problem. <
If the machines are mechanically equal, it's obviously not the cards. Although you can only be absolutely certain if you swap the cards between machines and see if the green screen issue follows one or both cards.
However, that new LCD display and card combination doesn't have much time in the pipeline so there could be other issues and you're doing the beta testing for all of us. Blaming the reseller is pointless; no one can keep track of all of these issues. We only find out about them only because of reported failures.
You should research the "green screen" here on the forum. I do not recall if there are display or graphics cards issues associated with it. That seems unlikely. IIRC, it appears to be a QT issue.
bogiesan

GX60 shows two video cards? 7970M and 8650G.

I updated to the latest ati drivers, and now my laptop, GX60, thinks I have two video cards installed, a HD 7970M (true) and a HD 8650G (not true).
If I uninstall the 8650 under device manager, I am then unable to run the catalyst control manager, as it doesn't think I have a graphics card. This is even though the 7970M still shows up under devices.
Also, now when I run a youtube video, it shows as a green screen, with audio. I read that I am supposed to disable hardware acceleration under the flash menu, but that tab doesn't show up, which I believe is related to having messed up drivers.
What do I do?

Quote
and now my laptop, GX60, thinks I have two video cards installed, a HD 7970M (true) and a HD 8650G (not true).
Em, no both is true. Your notebook HAS two gpus. The HD8650G is the integrated gpu of your AMD A10 APU. The 7970M is only active when 3D load is applied while everything else is covered by the integrated HD 8650G gpu.

What are the benefits of having two video cards?

I currently have a PNY Nvidio quadro FX 3800 video card installed. I have another card that is not installed. It is an EVGA E-GEforce 8800GT. I only want to run two monitors. I am thinking with two video cards I will have live preview on screen during HD video capture. Is this correct? What if any other benefits will I get from running two video cards?

Hello
I am using CS5 with a quadro 4000 card. I have two Eizo's attached to the quadro 4000 via the display port. Everything is working fine. I need to connect a plasma screen to my pc (3 monitors total) for viewing red files. I could use the red rocket to export video to the plasma screen but it would be nice if I didn't have to install another driver other than the quadro 4000 nvideo driver. My question is, will having 2 video cards installed in my pc cause any problems? If it will, I will have to use the red rocket for the third monitor. Thanks
Bill Martz

Two Video Cards in Console?

Hi, I apologize if this may be kind of a dumb question; I have two video cards; an ATI and an NVIDIA card; My question is fairly basic; X11 aside, should I be able to plug both video cards in and get the 'console' to display by default out of both cards? Do I have to do anything special to setup the second card for console (i.e non-X)? I know the OS is detecting both cards because they show up in lspci. The second card (the card in question), also shows up in dmesg. I dont' care if the same video signal is displayed on the second monitor; I just want it to display *something*; I am currently not getting any signal out of it.
Dan Sullivan

The most promising way would be to get framebuffer consoles on both cards. For the secondary card, you will have to load a GPU specific driver that has kernel modesetting. For the primary card, you can either do this or load a generic one like uvesafb. Once you have /dev/fb0 and /dev/fb1 you can move consoles from the primary card to the secondary card using con2fb. I'm not sure if it's in an Arch package but its a C file that has been floating around the fbdev community: http://www.linuxquestions.org/questions … ng-454625/

Running iMovie 08 on a PowerMac G5 with two video cards?

I have two video cards installed on my PowerMac G5. The primary card is the Radeon 9600 XT (AGP). I also added a relatively inexpensive Radeon 9200 (PCI) to run a second monitor.
Under iMovie HD, this setup works well, although it does warn me that one of the video cards is unsupported. (As long as the iMovie windows are on the primary monitor). Final Cut Pro Studio 2 also has no difficulties with this setup.
iMovie 08, while it installs, starts up with a window saying that Quartz Extreme is required and only allows me to quit. The 9600 XT does support Quartz Extreme, while the 9200 does not.
While I do not use iMovie for my own video editing (I do have Final Cut Pro), I need to be able to open and see student projects created in iMovie. It seems odd that iMovie could have stiffer video card requirements than Final Cut Pro (or Motion 3).
rhf3

Hello! You are correct "iMovie requires a Mac with an Intel processor, a Power Mac G5 (dual 2.0GHz or faster), or an iMac G5 (1.9GHz or faster)". You can't upgrade the G4 to run iMovie 08. Tom

One or two video cards?

Can anyone please help me out with a quick answer/opinion to this one?
Which would be the better choice (for Encore/Premiere of course) between these two video card possibilities?
256MB nVIDIA GeForce 7800 GT - TV-Out + DVI - PCI-Express
or
TWO times 256MB nVIDIA GeForce 6600 LE - DVI - SLI Configuration
Many thanks.

Hello Harald437, and a warm welcome to the forums!
Some Mac Video input options...
http://www.bensoftware.com/btv/helpvidindevs.html
Pan/Tilt/Zoom (PTZ) support for many network cameras...
http://www.bensoftware.com/ss/

Two video cards?

The info on the Macbook Pro says:
"... NVIDIA GeForce 9400M + 9600M GT 512M..."
Do the Macbook Pros actually come with two video cards or are we to choose between the two when ordering.
If they come with both, are we forced to allow the OS to choose which it uses based upon its idea of workload or can we choose?
Thanks
-Mike

Well, to be technical - the 256mb is allocated for the graphics system, period. If you switch to the 9600 chip, it is not de-allocated until you reboot the machine. I would call that "stealing". But as they say, you say tomato, your friend says tomoto. And your example is of applications "using" ram, when those applications are closed, the memory is then available for other applications (except to be even more technical, with most modern operating systems, it's near impossible to avoid the interaction of virtual memory) , whereas this 256mb for the graphics is NOT available unless the computer is rebooted.
It also slows down overall operation of the computer because cycles are spent on figuring out where that 256mb is, what it contains, what it needs to contain, what it no longer needs to contain, etc etc. Those cycles could be much better spent on actual system and application operations.
Id really love to know if the 9400 chip remains in this "pro" line of laptops for ANY other reason than to allow apple to claim "Up to 8 hours of use" on a single charge??????????????
eww wrote:
The 9400 option will "steal" 256mb of ram from your system...
What Peacheasy, who's already grousing about his MBP even though he doesn't have it yet, means by >the above is that the 9400 processor uses 256MB of the RAM that has been installed for it to share >with all the other memory-using hardware and software in your machine. It isn't "stolen" any more >than the memory used by your applications is "stolen". It's used . That's what it's there for.

MSI P6N SLI-FI - two video cards non SLI help

Hi,
I am currently running Win 7 Pro 64bit on a MSI P6N SLI with a GeForce GTS 250.
I would like to run 3 monitors and thus install another video card. I was thinking about an GeForce 9400GT using PCIe.
My manual tells me I can only run two video cards in SLI mode, which I don't want to do.
Searching this forum, I found two contradicting posts; one telling me that it is possible to run two cards non-SLI (https://forum-en.msi.com/index.php?topic=107857.0), one telling me it's not (https://forum-en.msi.com/index.php?topic=124883.0).
Can anyone tell me which one's true?
And as an alternative, would it be possible to use a PCI (non-PCIe) card like a GeForceFX 5200 additionally to my GTS 250?
Any help would be appreciated,
greetings
cmdkeen

that guy would be me and yes, my pc BSOD-ed like hell with a 8600GT and a 9800GTX, but only after a few days.
maybe it was a driverissue, but I gave up after a 3 weeks
now im running a 250GTS alongside the 9800GTX (non sli !!) and that works fine, since the 250 is essentially a rebranded 9800GTX.
so dont be to happy yet and wait for a few days/weeks and see how it goes.
if it BSOD's, best bet is to get an identic vga, would be my advice.
good luck an keep us posted.

Video Card Issue? Seems atypical.

2012 Macbook Pro 15" Mountain Lion Bootcamp Win 7 Pro. While idle in Windows, screen went to gray and fans went high gear. Goes to gray on reboot after Windows startup logo. Goes to gray after initial spinning wheel on Mac side. In Mac Safemode, after the loading of the progress bar, the screen cycles through about 3 seconds of fast moving lines and distortion then goes to a gray screen with hard to see verticle pinkish lines. BUT the computer still boots into Windows safemode with Networking and works fine, so this does not seem to be the dreaded 2012 video card issue. Am stumped!

Welcome to the forum!
What machine and OS are we discussing here to begin with?
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

MSI P6N SLI Platinum - Two Video Cards Non SLI

I have a P6N SLI Platinum that I am trying to get two video cards working at the same time, but not in an SLI configuration. I'm wanting to use them for 3 monitors at the same time. The cards are both Nvidia 8800GS, but one is by EVGA and one is XFX. Both cards work individually, but when trying to use both of them at the same time, Windows will not recognize them. I am currently running Windows XP Pro. Is this type of configuration possible with this motherboard? Any help would be appreciated.
Thanks

i think you will be told by msi to be able to use two card on one mobo you have to have sli enabled.

Are there any issues when installing two video cards in the same pc?

Hello
I am using Premiere CS5 with a quadro 4000 card. I have two Eizo's monitors attached to the quadro 4000 via the display port. Everything is working fine. I need to connect a plasma screen to my pc (3 monitors total) for viewing red files. I could use the red rocket to export video to the plasma screen but it would be nice if I didn't have to install another driver other than the quadro 4000 nvideo driver. My question is, will having 2 video cards installed in my pc cause any problems? If it will, I will have to use the red rocket for the third monitor. Thanks
Bill Martz

Only three obvious drawbacks, provided you have a free PCI-1 16x slot available;
1. You may need a much more powerful PSU.
2. You need to improve your cooling significantly.
3. You need to buy an extra card.

My 27" imac won't boot in normal mode. The screen stays white. I have upgraded to Yosemite. However, the computer does boot in safe mode. Could this be a virus related issue or possibly a video card issue?

My 27" iMac will not boot in normal mode. The screen stays white. The computer will boot in safe mode. Could this be virus related or is it possibly an issue with my video card. Before this happened, my computer screen was flashing weird things and the computer would unexpectedly power down.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.FolderActions.folders com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.SafariNotificationAgent com.apple.usbmuxd com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper ' ' 879294308 3627668074 1083382502 1274181950 1855907737 464843899 3694147963 1417519526 1233118628 2456546649 2806998573 2636415542 842973933 3301885676 891055588 998894468 695903914 1443423563 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' sub(/ :/,"");{ print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+$$//g;p ' '/\.appex\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e sysctl\ -n pluginkit );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|Roame|SMC:|suhel| VALI|ver-r|xpma' -o -o -k Sender fseventsd -k Message Req SL -o -k Sender Req launchd -k Message Req de: " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 38 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 39 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Two video cards issue

Similar Messages

Maybe you are looking for