Two VPNs, one accesses DNS properly, one does not.

I have two Offices with two separate RRAS servers setup in each one on Windows 2012
Office 1
DHCP server on separate VM from RRAS server.
RRAS Server on VM
Office 2
RRAS and DHCP servers on same VM
Both DHCP servers and RRAS servers are configured exactly the same except, of course, the DHCP server scopes are different subnets. I literally brought both up in two different screens and went screen by screen.
I running a Mac at home, however, I have the same problem on my PC. If I connect to the VPN in Office 1. Then run nslookup and do a DNS lookup, it uses my VPN's DNS servers and resolves the IP.  If I connect to the VPN in Office 2. Then run NSLookup
and do a DNS Lookup, it shows me that I'm using my local (to my Mac) DNS servers and it won't resolve the IP.
I have checked my Mac (and PC) VPN settings and they are also identical.
I don't even know where to check to solve this problem.

Both servers are the same. Ethernet on top and then Remote Access connections.
I noticed while searching on this just now that there is this article: http://www.isaserver.org/articles-tutorials/configuration-general/work-around-VPN-clients-split-DNS.html
but nowhere in my registry is this \Device\NdisWanIp that they're talking about.

Similar Messages

  • After moving my music library from my old mb to the new one, my new mb pro does not play the files evenly. It takes a break for two sec's and starts playback where it stopped. Ideas anyone?

    After moving my music library from my old mb to the new one, my new mb pro does not play the files evenly. It takes a break for two sec's and starts playback where it stopped. Ideas anyone?

    I may have found an answer here:
    http://www.ilounge.com/index.php/articles/comments/moving-your-itunes-library-to -a-new-hard-drive
    They only thing I can assume is that my external hard drive was slow to start and iTunes defaulted to its old directory (see the last paragraph at the link above). However, once my external was recognized shouldn't everything have fixed itself?
    Message was edited by: williamson42
    Message was edited by: williamson42

  • COPA - Multiple Sales Order with one wbs element.  COPA does not reference

    COPA - Multiple Sales Order with one wbs element.  COPA does not reference of reference of sales order.
    Hi All
    Currently we are in process of implementation of project related to Club Service for one of the client.
    Concept of this project is - there is "X" company engaged in supporting the different shared services for their client e.g. Client IBM - Shared Support Services of IBM is
    u2022     IDM
    u2022     Software Installation
    u2022     Help Desk
    u2022     Maintenance
    Co.. "X' is performing these services for IBM.    So for Co. "X" - IBM is one engagement. Like this way Co. X is performing such activities for many companies e.g. microsoft, HP, ABN AMRO etc.
    Objective - Get the consolidate report from COPA (Customer wise/services wise/sales order wise e.g. IBM/HelpDesk/10002/10).
    We propose a solution to create a project for each engagement and with WBS element. Each WBS element of different services e.g.
    Project IBM Inc.  100.100
    WBS Element    100.100.IDM 
    WBS Element    100.100.SoftIns
    WBS Element    100.100.HelpDesk
    WBS Element    100.100.Maintainance
    For this engagement (IBM), we are creating a sales order with line items (for services) and account assignment is WBS element.  In a sales order, there may be two lines for one services.   In a particular period, there are many such sales orders for this engagement... Milestone billing/period billing is used depending upon the services rendered.
    Now Cost Object will be WBS Element. So cost and revenue will posted to WBS and from this it goes to COPA.  In a month of May 2009 two - sales order is booked with three different line items with account assignment is WBS element.
    Sales Order Line Item No.....Item                  Account Assignment                      Revenue
    10000          100     IDM      100.100.IDM              1000
    10000          200     HELPDESK      100.100.HelpDesk              2000
    10000          100     Maintenance      100.100.Maintainance         3000
    Another Sales order booked with two different line items
    10000          100      IDM     100.100.IDM          3000
    10000          200      HELPDESK     100.100.HelpDesk          4000
    Cost will be booked directly against WBS element.
    In sales order level, there is no profitability segment, as cost object is WBS element.
    Billing, revenue will be posted directly to wbs element, from this revenue and cost of sales goes to COPA.
    Now in COPA,
    1.There is only one line for WBS element ex. 100.100.IDM with revenue 4000 (combing both the sales order)
    2.There is only one line for WBS element ex. 100.100.HelpDesk with revenue 6000 (combing both the sales order)
    3.There is only one line for WBS element ex. 100.100.Maintainance with revenue 4000
    In above case 1 & 2 we will not have reference of sales order and sales order line item in COPA table. There is only one line for this.  So we can not have reporting to sales order level.
    Is there any way by this the reference of sales order and sales order line will come in COPA for case 1 & 2.
    Please help in this issue.
    Regards
    Abhay Dev
    Ph:- 91-22-67782229
    Cell:- 91-9819175185

    Hi,
    For these case (multiple materials with different characteristics); have you consider going to next level of WBS Elements. Meaning; lets say currently you are assigning WBS "Engineering (which is a level 2 WBS)" to all the items in SO. Instead under "Engineering" create 2 or 3 level 3 WBS Elements as E1, E2 etc and assign them 1:1 to your sales order line items. This would eliminate the exit as welll as complex development option. And also will let you get all the data in COPA and in turn you can pull to BW as well for reporting. Just a thought.
    Regards
    Sreekanth

  • When initiating an e mail to someone with several addresses used in the past the one I use most often does not come up in the first position.  How can I get these multiple e mails prioritized?

    When initiating an e mail to someone with several addresses used in the past the one I use most often does not come up in the first position.  How can I get these multiple e mails prioritized?

    We are talking about the Mail app, right? In the Mail menubar, click on Window and then Previous Recipients:
    That eliminates the previous recipients. If you are talking about the suggestions because there are 10 people with the name 'Steve' in your Contacts, then I do not know how to eliminate those unless you change the name slightly or wait until you type the last name or some other differentiator.

  • HT3669 HP ENVY 4500 e-All-in-One Version 3.2.1 does not work on iMac 20-inch, Mid 2007. Only recognizes scanner not USB printer.

    HP ENVY 4500 e-All-in-One Version 3.2.1 does not work on iMac 20-inch, Mid 2007. Only recognizes scanner not USB printer.
    I would like to print via the USB connection instead of wireless (the wireless does work, and the scanner works via USB).
    I tried connecting the printer directly (via USB) to my MacBook Pro laptop and it worked just fine.
    How can I make this printer work on my iMac?
    I spent 4 hours on the phone with HP and we did every combination of installation of drivers ad nausum and their bottom line is that it is a Mac problem.
    Any help would be appreciated. Will be sending this printer back to Amazon if I can't make it work on the USB.
    I am open to questions or suggestions
    Thanks,
    Chet

    After 4 hours on the phone with HP and another hour with Apple (Mavericks support) no real solution other than check everything (removed everything from Login Items, removed all HP software anywhere in the system reboot, reinstall printer) then when nothing worked for the 4500, did an OS Reinstall (boot with CMD+R).
    The Mavericks support group did open an incident (# 542875311) and I will update it when I figure out how to find it on the system.
    My feel is that the base problem is that somewhere between the HP-Inkjet-SW-OSX-Mavericks_v12.34.49-2 package and the Apple HP Printer software in the Library (version 2.16.1) the app for printing via the USP Port just does not get installed for the mid 2007 20 inch iMac. The scanner is recognized on the USB Port and the Printer works fine on Wi-Fi. I have too many devices to burden my home network with anothe device. Also, every time I put any HP Printer on Wi-Fi, my router (Netgear N600 WNDR3400 running 12 to 20 devices depending on who is home) gets wonky (but that's anothe story...).
    Additionally, when I attach the HP Envy 4500 to my MacBook Pro (2010) it works perfect - print and scan via the USB prot and both functions show in the System Preferences - Printers and Scanners just as expected and just as the 3050 does.
    Chet

  • Ibooks author, how do I get the standard book pages background into my document. I have published one book so far which does not display with a book pages background or options for font size.

    ibooks author, how do I get the standard book pages background into my document. I have published one book so far which does not display with a book pages background or options for font size.

    No on the book title, no problem there.
    The issue is: my book pages appear as on white paper, no background that resembles a open book and also no option to change fonts. The book was created in iBooks author, there was a problem going with the "Publish" menu route so I was instructed my Apple to "export" the file and submit that. I think that's the problem after reading that iBooks author is a hybrid epub file.
    Thanks for getting back to me.

  • I have an iphone4, and suddenly one day my factime app does not work anymore!! How do I get it to work again, Please?

    I am using an iphone4. Suddenly one day my factime app does not work anymore!! How do I get it to work again, Could someone please me?

    Try a reset or restart of the device. If it still does not appear on any of the home screens and cannot be found in a spotlight search, restore the device.

  • I downloaded an album and one song from the album does not play?

    I downloaded an album and one of the songs listed does not play.

    Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting the incomplete track from your iTunes library and redownload it via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes : re-downloading.
    If you aren't in a country where you can re-download music or if it re-downloads in the same state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that song and use the 'Report a Problem' link and fill in the details (iTunes support should reply within, I think, 24 to 48 hours).
    Some people have had a problem with the 'report a problem' link (it's been taking people to this site on a browser instead of showing a form in iTunes) - if it does that to you then try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page.

  • One Device has malfunctiond & WIndows does not Recognize

    Getting beyond Frustrated. Bought 2gb Nano today (noon) now 730 and I still have not been able to use it. I keep getting a message that says "One Device has malfunctiond & WIndows does not Recognize, Clickon this window". NO LUCK. I have reset, Reinstalled software, My Ipod is not showing up in my Itunes. I have also changed the power settings under device manager. HELP PLEASE

    As it is new it could be a hardware problem. Is it possible for you to try the iPod on another PC. If not I'd suggest that you:
    a) make sure the iPod is fully charged,
    b) use a different USB port (if your laptop has more than one).
    c) if you have any other USB devices connected (or a USB hub) disconnect all but the iPod.
    d) if none of the above work try apple's 5Rs.
    e) put the iPod into self-diagnostic mode (method for doing this varies between iPod types you'll need to use the apple website to find the right method for your iPod).
    Of course if you are close to an apple shop it may be easier for you to get them to check your iPod.

  • Access DB (& .ldb file) does not close after crystal reports

    Post Author: mgold
    CA Forum: Crystal Reports
    Access DB (& .ldb file) does not close after crystal reports
    Hi! We have a VB application using Crystal Reports 6 that has worked successfully on hundreds of systems for over 10 years. Now, on one network, the application and access database does not close. It seems to hang on the [.Close] command.
    When we open the application an peruse the screens without opening up a report (using crystal reports), the application and access db closes fine. But as soon as we run a report and then close the report and try to close the application, the access db does not close. Many of the screens open the db and grab data from the access db, but it's only after running crystal reports that we have this problem. (Please see more information below.)
    Setup: Application and data (access 97 db) reside on a server in the same folder, but application shortcut is kicked off on client PC. Kicking off the shortcut on the client PC means that the image/process runs on the client PC (not on the server). In this problem case, the application shortcut is on a Windows XP Pro Version 2002 SP2 PC with the app & data on a Windows 2003 server. Users are local Admins on their PCs with "Full Control"over the directory and files on the server where the data (access 97 db) resides. This type of setup is typical and has worked without any problems for clients.
    The application is written in Visual Basic, using Crystal Reports 6 (using DAO). We close the recordset, set it to zero and then it hangs on closing the db (.Close command).
    A few key pieces of information:
    - The application closes fine if the app & data (access 97 db) are on a local PC. This includes closing fine if the application is run directly on the Windows 2003 server where the data is stored.
    - It worked on this client's network until sometime in the last few weeks.
    - One thing that changed is that the company is using VMWare on its servers. Not sure if they started using VMWare at the same time as it started failing. This may be unrelated. Possibly other things changed, but can't get any more information ... yet.
    - It works fine running the application from a Windows Vista PC with a user who is a domain admin.
    - The access db and application hang for about 10-20 minutes and then eventually closes. It appears that somehow
    Crystal Reports is keeping the db open, but I'm not sure why.The application doesn't quit and the database doesn't close even if I try to end the task with the Task Manager.
    - The Crystl32.ocx version being used is 8.0.0.4 (if that matters).
    - I copied 6 month old program files and database files to a test folder on the Windows 2003 server. It fails using these files that worked fine 6 months ago.
    Any ideas or help would be greatly appreciated! If you know of another good place to post this, please let me know.
    Thanks!
    - Mark

    Crystal doesn't support tables in HTML interpretation. 
    You can probably work your way around this by doing Replace() calls on the relevant tags.
    See:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313337333033383334%7D.do
    The supported HTML tags are:
    " html
    " body
    " div (causes a paragraph break)
    " tr (causes only a paragraph break; does not
    preserve column structure of a table)
    " span
    " font
    " p (causes a paragraph break)
    " br (causes a paragraph break)
    " h1 (causes a paragraph break, makes the font bold
    & twice default size)
    " h2 (causes a paragraph break, makes the font bold
    & 1.5 times default size)
    " h3 (causes a paragraph break, makes the font bold
    & 9/8 default size)
    " h4 (causes a paragraph break, makes the font bold)
    " h5 (causes a paragraph break, makes the font bold
    & 5/6 default size)
    " h6 (causes a paragraph break, makes the font bold
    & 5/8 default size)
    " center
    " big (increases font size by 2 points)
    " small (decreases font size by 2 points if it's 8
    points or larger)
    " b
    " i
    " s
    " strike
    " u
    The supported HTML attributes are:
    " align
    " face
    " size
    " color
    " style
    " font-family
    " font-size
    " font-style
    " font-weight

  • Cannot send email. When I click Write the window does not open properly. Does not have the "send, spelling, attach security save" line.

    Cannot send email. When I click Write the window does not open properly. Does not have the "send, spelling, attach, security, save line there. Then when I click File, then Send now it will not send. A message comes up saying my SMTP server failed. Have check and everything appears to be o.k.

    Hi Stephen,
    What version of MS Office are you using?
    Are you facing the issue similar to that mentioned here: Acrobat/Reader: Attach to Email button not working for PDFs referenced from long URLs
    Open Acrobat. Use the click-path Edit - Preferences - select the Category "Email Accounts". In the dialog there is the "Add Account" drop-down. Select "Add Other". The "Add Webmail Account" dialog presents. You'll fill out the dialog's fields with Outlook.com settings. (don't forget the "Advance Settings" button)
    From a look-see on the web it appears that the following are the needed settings. BUT, you'll be wanting to validate.
    The Outlook.com SMTP server settings for sending outgoing messages from an email program on desktop, cell phone or mobile device are:
    • Outlook.com SMTP server address: smtp.live.com
    • Outlook.com SMTP user name: Your full Outlook.com email address (not an alias)
    • Outlook.com SMTP password': Your Outlook.com password
    • Outlook.com SMTP port: 587
    • Outlook.com SMTP TLS/SSL encryption required: yes
    For incoming messages from an Outlook.com account to an email program using POP, use the Windows Live Hotmail POP3 server settings.
    The Outlook.com POP server settings for downloading new incoming messages to email program, cell phone or mobile device are:
    • Outlook.com POP server address: pop3.live.com
    • Outlook.com POP user name: Your full Outlook.com email address (not an alias)
    • Outlook.com POP password: Your Outlook.com password
    • Outlook.com POP port: 995
    • Outlook.com POP TLS/SSL encryption required: yes
    Regards,
    Rave

  • Why does the Error: 500 SC_INTERNAL_SERVER_ERROR appear when multiple users access my JSPs but does not occur when only one user accesses my JSPs?

    When multiple users run my JSP application, why do some users get an Error: 500 SC_INTERNAL_SERVER_ERROR for certain JSP pages with the error message No such file or directory. The JSP listed on the Error 500 page varies and is not always the same. When only one user runs my JSP application, the problem does not occur?
    The database connection is held when the user logs in or accesses certain parts of the JSP and then is immediately released. No connections to the database are held.
    We are using Solaris 8 with MU_6 plus recommended patches.
    Enterprise Ultra 250
    iAS 6 SP 3

    Is anything showing up in the KXS or KJS logs?
    It sounds like you might having some kind of thread safety issue with your code. Either that or your guess about running out of database connections.

  • America's top number one wireless service...does not work in Puerto Rico

    Please come back to Puerto Rico. I have been a member for over ten years. I live in Ohio  and will have to relocate to Puerto Rico.  My daughter is enrolled in college to become a school teacher in Puerto Rico. My family plan is not working well in Puerto Rico. I am paying for a family plan, (here in Ohio) and my daughter has two phones in Puerto Rico. They are not working. I had called Verizon Support, and was told that the phones must be mailed back to (Ohio)  me here in the states to be reactivated. Verizon phones cannot be activated in Puerto Rico. I prefer only Verizon, which is why I have not switched to any other provider. But, because Verizon does not have towers or businesses in Puerto Rico, even though we have 4G phones, we now have no service in Puerto Rico.   I am stuck with the choices of AT&T, T-Mobile, or Straight Talk from Wal-Mart, or the WORSE are the wireless and Internet services of Puerto Rico, Claro.. Claro has outages for DAYS and still expect full payment, regardless of how many days lost for service. Claro does not credit your account even if you had an outage for a week; you are still billed for the full month.  It is difficult to avoid this company in Puerto Rico. This is a message to CEO of Verizon...please bring your business back to Puerto Rico. When people asked my daughter what service she uses, they were excited when she said that she uses Verizon. But were disappointed when she said that her account is back in (Ohio) the states, there are no stores here. I have to send (AGAIN) two new phones activated here in the states back to Puerto Rico, so that my daughter can still use our Verizon Family Plan. There is nothing Verizon Support can do.  Once I move to Puerto Rico, there will be no one to send our phones to in (Ohio) the states to reactivate for our Verizon Family Plan. The phone service works for about three or four months, (in Ohio) than there is no service at all. Please bring America's top number wireless service back to Puerto Rico. Or Make some kind of deal with the wireless tower owners in Puerto Rico, so people that even visit Puerto Rico can use your phone service. Thank you for reading my request

    Our home line has had no dial tone for two days now.  When a repair was requested, we received a commitment of 8/8.  That timing was not sufficient.  I updated the repair request on line indicating that we needed the repair by today.  I called this morning and a recording told me that Verizon was committed to repair the phone by 8pm tonight.  Well, 9:30pm and no Verizon.  I tried calling with my cell phone and sat on the phone for over 30 minutes.  Either no one was home or it was past business hours.  In any event, here we sit with no home phone service.  We are elderly.  My husband has a heart condition.  I am grateful for our cell phones, not Verizon.  What if we had a real emergency and didn't have cell phones?  This is not customer service.  We never even received a phone call or an email as we requested on the repair status.  So sit another day or maybe more.  Frustrated in NJ.  P.S. Our experience with My Verizon is it sends you round and round and round with no real solution to your problem.  Any suggestions? Thanks.

  • One of the user names does not show up on the login screen

    There are two admin accounts set up on the computer but only one of them shows up on the login screen. Any ideas why and how to change it?
    Thanks a lot.
    Tomek

    Thank you for the reply, but it does not work for me. I have no clue why.

  • I auth 3 computers; on one of them, suddenly, iTunes does not mount the iPhone

    Up to know I was able to sync to either one or the other= no problem; now one mounts in Explorer (hence the driver is OK)  but it is not recognised in iTunes. But why this one?? I noticed that the Apple Mobile service launch and closes on the spot. Other 2 are still OK... so I can sync you would say.....
    I have iphone 4 v 4.3.3 and the latest iTunes , on Win7 Premium
    and a subsidiary question : when I sync Outlook 2010 Notes (not contact or calendar notes, just NOTES) where it goes on my iPhone ??
    Thanks
    Henry

    All that you can do if you have a "rule" for the MacBook Air is delete the current "rule" save the settings, then update AirPort Utility. Then, go back into AirPort Utility and set up the MacBook Air "rule" again.
    If the MacBook Air does not have a "rule" at all, then there is not much that you can do other than trash all of the Timed Access settings for the network, then set everything else up again. That is a lot of work, but it did correct things when I had the same kind of issue that you describe.

Maybe you are looking for

  • External monitor not working on flat screen imac

    I'm useing a new mini-VGA to VGA adapter part number M8639G/A and though I have tried two different displays, one mac, the other an old pc, neither worked. Any ideas? The mac help says it should just come on once I turn on the monitor. So I'm guessin

  • Submenu is not showing up in the main menu

    hey need help asap!!! The child page is not showing up with the parent page how can I fix this?

  • File Search won't search root level

    Our company rolled out an application that went to the root level of the HD. I was hoping to use File search on ARD 3.2.1 to find this .app, and delete it from a few users. However, file search doesn't want to show me any Apps in the root level. Is t

  • Help a new guys with JSP!

    Hi, i'm a new programer with JSP. I've created a class files that connect a database. But i would like to know how to write text with JSP? I would like to write a 'thank you' message after saving a form in a database. does its possible to have it in

  • A transparent question mark on iTunes icon in dock/ iTunes won't open

    Thanks for reading this and helping me--I have an iMac and a transparent question mark is in the middle of iTunes symbol in my dock. iTunes will not open at all when I try to open and there are no error messages. Thanks