Two VRFs into Only One

Hi all, this is my post, I need to integrate two VRFs, that is, a Banking corporation will expand its operations and will integrate with a financial group. These two, are customers of the same service provider, and represent each a different VRF. Now I need to integrate them into one. The Question...How can I do to solve the problem of same LAN Subnets..?...Same WAN Subnes..?..Do I need to necessarily change the IP scheme of one of the two VRFs before I can proceed with the integartion?

Hector,
This is no different from merging two networks outside of the VRF context. You either need to renumber the overlapping networks or use NAT (or even double NAT in some cases).
Regards

Similar Messages

I have 3 iTunes accounts and want to merge them into only one of them. I also have money on all 3 accounts

I have 3 iTunes accounts and want to merge them into only one of them. I also have money on each account. Not sure how to go about this.

You cannot merge the accounts.
Sorry.

We have two iphones and only one ipad. We want to be able to use "find my iphone" for both phones, which have separate apple ids. How do we get our ipad to accept this?

We have two iphones and only one ipad - no mac. We want to be able to use "find my iphone" for both phones. How do we get the ipad to accept two iphone accounts? icloud is enabled on all three devices.

Also, be aware of the following:
The "Find my..." function is pretty much useless if the device is in the hands of a thief. All that is necessary is for the thief to connect to any computer with iTunes and "Restore as new."
The only real protection you have is with the personal information on the device rather than the physical device itself. Something as small as an iPod/iPhone should have a strong 8-digit (or longer) password AND be configured for automatic wipe in the event of ten consecutive incorrect password entries.

HP Laserjet CP1025nw Color Printer - printer prints two copies when only one is requested.

pcwizard (HP) requested that I try Foxit Reader 5.1 to see if the printer will print properly. I used the same previous document and printed it with Foxit Reader 5.1. The printer printed two copies when only one was requested as it had done in the past. We still have a problem.
I am using Windows 7 (64 bit) for OS. I have experience the issue on two different computers.
dslledyrt
This question was solved.
View Solution.

Hi dslledyrt,
Can you install the Basic Driver for the printer on one of the computers, and let me know if you still have this issue?
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-90357-1&cc=us&dlc=en&lc=en&...=
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Problem Logging into only one of many computers

1. I have two desktop computers. One is hard wired to a linksys router and works great. The other desktop that has a problem logging into my email account. See (5) below. 2. First you must know that I also have an apple mac that is connected via the Router and it also works fine running OSX. 3. I have a Dell Laptop running Vista connected via the Router that runs fine. 4. Have another Dell Laptop running Win 7 is connected via the Router that runs fine. 5. I have this desktop running Win XP pro that is my problem. This is how the problem goes: I get to what appears to the correct login page; Type in the correct user and PW info; execute by clicking on the correct button; Nothing happens; I try several other ways; I click on the "signin" box at the extreme top right and nothing happens; I click on another box that ask for my location and a new window appears asking for my addres and zip code. I eventually get to the email. Now at this moment I look at the top of this my current window and I see that my location is shown and I am signed into verizon to write to you. There is a block that reads "signout". What is going on?

And one more small detail. After I have this problem there's a crash file in ~Library/Preferences called 'com.apple.iLifeAssetManagement.crqash.plist'. It's cryptic, but it says:
bplist00“_AssetManagmentCrashDetailsKey_AssetManagmentCrashCheckerKey°’
_&AssetManagementAgentProcessInfoDateKey_3AssetManagementAgentProcessInfoProcess IdentifierKey_0AssetManagementAgentProcessInfoSupportsDeleteKey_7AssetManagement AgentProcessInfoSupportsSharedStreamsKey_0AssetManagementAgentProcessInfoExecuta blePathKey3A∑Ëô¿U∞y— _i/Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStreamAge nt.app/Contents/MacOS/PhotoStreamAgent÷_&AssetManagementAgentProcessInfoDateKey_ 3AssetManagementAgentProcessInfoProcessIdentifierKey_0AssetManagementAgentProces sInfoSupportsDeleteKey_<AssetManagementAgentProcessInfoSupportsSharedStreamsVide oKey_7AssetManagementAgentProcessInfoSupportsSharedStreamsKey_0AssetManagementAg entProcessInfoExecutablePathKey3A∏Ü“@Ôx î _i/Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStre amAgent.app/Contents/MacOS/PhotoStreamAgent
π

Archiving into only one destination

Hi Friends,
OS : OEL 5
DB : 10.2.0.1
when i enabled archivelog mode, by default its going to flash_recovery_area.
I enabled log_archive_dest parameter and i observed that now i am having two archives generated (one in flash recovery area and another in the path i provided with the above parameter)
I tried with disabling the db_recovery_file_dest parameter, but it is effecting RMAN backup and other features.
Anyone please tell me how i can have archives in only one location, i mean i dont want in flash recovery area but in customized path.
thanks in advance

Pavan,
Aman and doc are 100% right; i.e. we can use log_archive_dest_n (not log_archive_dest because it is deprecated in 10g) with/without DB_RECOVERY_FILE_DEST no issue, because below is the test demo on 10g on windows xp (i do'nt think that i would act different on linux/OEL)
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Girish Sharma>net start oracleserviceorcl
The OracleServiceORCL service is starting.................
The OracleServiceORCL service was started successfully.
C:\Documents and Settings\Girish Sharma>sqlplus
SQL*Plus: Release 10.2.0.1.0 - Production on Thu Dec 3 09:00:12 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter user-name: sys/******** as sysdba
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> show parameter DB_RECOVERY_FILE_DEST
NAME                                 TYPE        VALUE
db_recovery_file_dest                string      C:\oracle\product\10.2.0\flash
                                                 _recovery_area
db_recovery_file_dest_size           big integer 2G
SQL> show parameter ARCHIVE
NAME                                 TYPE        VALUE
archive_lag_target                   integer     0
log_archive_config                   string
log_archive_dest                     string
log_archive_dest_1                   string      LOCATION=C:\oracle\product\10.
                                                 2.0\flash_recovery_area\ORCL
log_archive_dest_10                  string
log_archive_dest_2                   string
log_archive_dest_3                   string
log_archive_dest_4                   string
log_archive_dest_5                   string
log_archive_dest_6                   string
NAME                                 TYPE        VALUE
log_archive_dest_7                   string
log_archive_dest_8                   string
log_archive_dest_9                   string
log_archive_dest_state_1             string      enable
log_archive_dest_state_10            string      enable
log_archive_dest_state_2             string      enable
log_archive_dest_state_3             string      enable
log_archive_dest_state_4             string      enable
log_archive_dest_state_5             string      enable
log_archive_dest_state_6             string      enable
log_archive_dest_state_7             string      enable
NAME                                 TYPE        VALUE
log_archive_dest_state_8             string      enable
log_archive_dest_state_9             string      enable
log_archive_duplex_dest              string
log_archive_format                   string      log%t_%s_%r.arc
log_archive_local_first              boolean     TRUE
log_archive_max_processes            integer     2
log_archive_min_succeed_dest         integer     1
log_archive_start                    boolean     FALSE
log_archive_trace                    integer     0
remote_archive_enable                string      true
standby_archive_dest                 string      %ORACLE_HOME%\RDBMS
SQL> alter system set log_archive_dest_2='LOCATION=D:\orcl\archdest2' scope=both;
System altered.
SQL> alter system switch logfile;
System altered.
SQL> --Upto Here all is fine. I got the archived log file at D:\orcl\archdest2
SQL> alter system set DB_RECOVERY_FILE_DEST='' scope=both;
System altered.
SQL> alter system set log_archive_dest_1='LOCATION=D:\orcl\archdest1' scope=both;
System altered.
SQL> alter system switch logfile;
System altered.
SQL> --Upto Here also all is fine. I got the archived log file at D:\orcl\archdest2 and D:\orcl\archdes1, but not at FRA.
SQL> show parameter DB_RECOVERY_FILE_DEST
NAME                                 TYPE        VALUE
db_recovery_file_dest                string
db_recovery_file_dest_size           big integer 2G
SQL> show parameter ARCHIVE
NAME                                 TYPE        VALUE
archive_lag_target                   integer     0
log_archive_config                   string
log_archive_dest                     string
log_archive_dest_1                   string      LOCATION=D:\orcl\archdest1
log_archive_dest_10                  string
log_archive_dest_2                   string      LOCATION=D:\orcl\archdest2
log_archive_dest_3                   string
log_archive_dest_4                   string
log_archive_dest_5                   string
log_archive_dest_6                   string
log_archive_dest_7                   string
NAME                                 TYPE        VALUE
log_archive_dest_8                   string
log_archive_dest_9                   string
log_archive_dest_state_1             string      enable
log_archive_dest_state_10            string      enable
log_archive_dest_state_2             string      enable
log_archive_dest_state_3             string      enable
log_archive_dest_state_4             string      enable
log_archive_dest_state_5             string      enable
log_archive_dest_state_6             string      enable
log_archive_dest_state_7             string      enable
log_archive_dest_state_8             string      enable
NAME                                 TYPE        VALUE
log_archive_dest_state_9             string      enable
log_archive_duplex_dest              string
log_archive_format                   string      log%t_%s_%r.arc
log_archive_local_first              boolean     TRUE
log_archive_max_processes            integer     2
log_archive_min_succeed_dest         integer     1
log_archive_start                    boolean     FALSE
log_archive_trace                    integer     0
remote_archive_enable                string      true
standby_archive_dest                 string      %ORACLE_HOME%\RDBMS
SQL>Rest can be approved by Aman and/or more experienced fellow forum members.
Regards
Girish Sharma

ICal sync between two people if only one person has a .Mac account

Is there a way for two people to sync/edit iCal calendars if only one person has a .Mac account? I'd only want to selectively share/sync part of my iCal calendar and not the entire iCal calendar.
Any ideas?

I think you meant to say "merge"
I am trying at the moment with fingers crossed.
One has Leopard the other Tiger. I hope it works.
Oh I turned on airplane mode and disconnected from the internet just to be sure sync doesn't get stuck.
Asked me to resolve 6 conflicts.. that's a good sign. It is taking a long time though. I hope it won't take so long every time I go from one computer to another. Otherwise it is easier to pass the files via iChat.
The file for address book is addressbook data in library/applicationsupport/address book
for iCal I make an export VCal file and then on the other computer delete the calendar and import the new one.
On the computer with Music I set it to manage manually.
OK I think I will have to do it like that because this took forever then it said it would have to modify 836 entries on my calendar for what was almost the same file.
The photo sync is annoying but I just turn off iPhoto when it asks to find my library (or you can make another program be the default program when you attach a camera and that program will come on then you can just quit it). I find the auto photo sync annoying as it takes so long and I would rather do that manually.

UCCX 8.5.1 SU2 Agent Line/Ext on Two IP Communicators - Only One Will Be Registered

I have a corner case where an agents laptop may use a local Gigabit Ethernet port or a different Gigabit Ethernet port located on a laptop docking station using IP Communicator 8.6(2).
Due to a requirement for QM/Compliance Recording (per Calabrio), we need to code the SEP<NIC MAC ADDRESS> for each potential port; meaning I will have two IPCs coded; each with a unique device name set to SEP<NIC MAC ADDRESS>.
The IP Communicators are set to generate their device name automatically. This means that they can only use / register one IPC at a time.
In the lab, having two IPCs configured with an identical line seems to function 100% when only one of IPC stations is registered to CUCM.
SRND and various posts state the usual about shared lines for agents being unsupported.
Does my scenario fit with "this is a shared line" which would force us to alter design and complicate the user experience with extension mobility?
Thoughts?
Code in use is CUCM 8.6 and UCCX 8.5(1)SR2; CAD is being exclusively used on Win 7.

Calabrio professional services has informed us (and it was re-confirmed) that IPC needs to present the NIC being used for CR/QM/AQM to provide desktop recording functionality.
Do you have experience where you have "hard-set" or statically configured the device name to one of the NICs (LAN) but it also worked for other interfaces with unique MAC addresses (WLAN, dock LAN, AnyConnect)?
Also, our Cisco SE posed this question via IM to his Cisco AS associate and got a conflicting report; the justification was that "shared" in UCCX context means two or more active-registered to CUCM phone appliances with identical DN/in any partition (versus the CUCM definition of identical DN in a single partition). He seemed to have direct knowledge of using two phone appliances associated to the same user/agent for a phone appliance migration effort (7940s to 7942s) where everything was pre-configured, the old phone was removed and the new one placed (only one entry was registered at a time).
Do I trust Cisco SE/AS resources or SRND?
Thanks

How use two templantes with only one job ?

I have two templantes and want use with only one job.I use with input one xml data file !!
Is this possible?
Please Help!!
Thanks,
Bruno.

I probably missed this one earlier or felt that since it referenced an XML data file that I couldn't provide a definitive answer. I'm still not sure I can because we don't use XML for our data files, but use the "field nominated format". An expansion on Tammy's information: 1. use a multi-step job with each b task calling a different MDF. With this correction, it assumes that you either have access to set up the tasks/jobs yourself or can convince your Central administrator to do so. What happens is that TASKA is set up to reference FORMA and TASKB is set up to reference FORMB. Then a job is set up that causes both TASKA & TASKB to be ran. This will likely result in two different print files being sent to the printer. That may or may not be desirable, depending on whether your printer is set up to do something special between each print file (insert separator page, offset, whatever). Personally, I don't recommend this as it can quickly cause an unnecessary proliferation of tasks and jobs (we print 100's of differing form combinations with a single job definition). 2. I can't really address this as I didn't even know that a single form could cause another to be called. I would expect that unless the "base" form (say it is FORMA) is to always print with the secondary form (FORMB) it is restrictive and has the potential to cause a proliferation of FORMA files for the various combinations that are to be printed. Maybe it is possible to have logic to check the value of a data field to control what forms get called. 3. If you pass the XML file through a translation step and then through the transformation agent (maybe it can be done in a single step) this should work. It does add another step to the job as well as requiring learning to use the transformation agent. Depending on the combination of forms to be printed, you might need a different translation definition for each one, or at the very least have a data field that you can check the value of to determine what ^form commands to put in the output file. 4. My recommendation is based on assuming an XML data file has the same capabilities as a field nominated file. Within a field nominated file are various print agent commands, including references to data as well as which forms are to be printed (and a whole bunch of other commands). An XML file should have the same features - I just can't say what they might look like. If your current data file has no "form" reference but depends on the job/task definition you might have to stick with option 1. If it has a "form" reference, then you just need to insert additional references for additional forms. Then it is up to the source of your data (or a transformation agent step) to specify which forms are to be printed. For example, in field nominated format, the file might look like: ^job XYZ additional parameters ^form FORMA.MDF ^field FIELD1 data ^field FIELD2 data ^form FORMB.MDF ^field FIELD1 data ^field FIELD3 data or it might look like the way our files look: ^job XYZ additional parameters ^global FIELD1 data ^global FIELD2 data ^global FIELD3 data ^form FORMA.MDF ^form FORMB.MDF As you can see in the first example, there is a reference to the form followed by all fields that go on it followed by another form reference with the fields that go on it. This particular method, using all "^field" commands for defining the data requires that data duplicated between the forms be duplicated. (Or, the use of some ^global commands like the following.) In the second example, all data is defined first using the "^global" command followed by all of the form references. This allows for the data to be defined only once. If there is something unique regarding a particular form the field can be ^global at the beginning or it can be ^field b after the ^form reference (similar to the first example). As previously mentioned, the XML file should have the same capability but in XML notation, something like the following (forgive me as it has been years since I took the XML class and don't use it in my daily work so the actual format could be wrong, not to mention the actual labels): <job name=XYZ,option=aaaa,option=bbbbbbb> <form name=FORMA.MDF> <field name=FIELD1, value=xxxxxxxxxxx></field> <field name=FIELD2, value="xxxxxxxxxxxxx"></field> </form> <form name=FORMA.MDF> etcetera </job> or maybe: <job name=XYZ,option=aaaa,option=bbbbbbb> <global name=FIELD1,value=xxxxxxxxxxxx></global> <global name=FIELD2,value="xxxxxxxxxxxxx"></global> etcetera <form name=FORMA.MDF></form> <form name=FORMB.MDF></form> </job> or even (but I doubt it): <job name=XYZ,option=aaaa,option=bbbbbbb> <globals> name=FIELD1,value=xxxxxxxxxxxxxxxx, name=FIELD2,value="xxxxxxxxxxxxxxx" </globals> <forms> name=FORMA.MDF, name=FORMB.MDF </forms> </job>

Hi, I'd like to merge 2 iTunes accounts into only one !

I have one account for my iPhone and nother one for my iPad.
In fact I'd like to have only one account instead of 2 and merging all apps I've bought on the 2 accounts into One...
Is it possible ?
Thks for your answers...
Vincent

No you don't have to lose everything...
Choose the appleid you use the most for your iCloud account...
Apple has made sure that we are able to log in through the itunes, AppStore, iBooks, even FaceTime and iMessage through other accounts...
So you go to settings/AppStore and log out of your first appleid, log in through your second one
And you can download any old app that you had on the account, you can even buy new apps...
When you update your apps, even apps bought with your second account will show in your update list...
You'll be asked to enter the password of the second appleid to update, and it will update it effortlessly for you...
Don't worry until we get the option to merge, you can still use all your apps and books and songs... :)
Any other question feel free to ask me...

Of my two lap tops only one will recognise my iPad

I have two lap tops, neither an Apple. I have recently subscribed to iTunes Match. Whilst both laptops recognise that, only one is now recognising my iPod and I need to be able to sync from both. Any ideas?

Hi, Darcie13.
Thank you for visiting Apple Support Communities.
If your device is not recognized by iTunes, I would recommend the steps in the article below. Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > If the Apple Mobile Device USB Driver is not listed.
iPhone, iPad, or iPod touch not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H.

I have two email accounts only one is showing contacts calendars and reminders, how can I have both sets of contacts show up

I have 2 email accounts but only one of them is showing its contacts how can I get both accounts to show contacts?

Hi Rochdr,
You can use the following article to help you address this issue with your mail account in OS X:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Thanks for using the Apple Support Communities. Have a good one!
-Braden

HT1203 Two iTunes libraries, only one account!

My iTunes library on my PC is somehow different from my MAC library. How can this happen with only one iTunes account? How can I merge them?

1. The contents of the library are stored on the computers and are separate from what's recorded as associated with your Apple ID on Apple's servers.
2. Move the song files from one computer to the other.
(110730)

Two cameras, but only one works at a time, need help

I've gone over the messages here but not found any answers to my type of problem. I have two WVC54GCAs both have static IPs on my lan and I can view them both fine from there.
I forwarded the port for one to 47624 and the other to 47625 in my router at home and in the camera configuration I specified to use these alternate ports instead of the default 80 port. When I get in to work and try to view them over the internet by their ip address and port# (e.g. http://22.22.22.222:47624) I get a timeout error, but I can see one if I go to port 22.22.22.222:80 (even though the port I specified in the camera setup was an alternate port). I used dyndns open port testing tool (http://www.dyndns.com/support/tools/openport.html) which shows 47624 and 47625 are both open ok.
I can log into my router on 22.22.22.222:8080 from work and the router logs show that the dyndns tool connected to the router via these ports upon testing. I was using a Netgear router and thought that might be the problem, so went out and got a Linksys wRT54G2 router to see if that worked better, but have the same issue as with the Netgear. Here's the weird part, if I go into the router from work and change one of the cameras to forward to port 80 instead of the alternate port I'd set for it, I can view that camera on port 80 despite the camera config still set to use an alternate port. So then when I take the first camera off port 80 in my router and change the second one to port 80, I can view the second one as well that way. I have Comcast as my ISP and a Motorola SB5100 cable modem and can't figure out why I am unable to bring them up over the internet using the alternate port settings I specified. I've spent a lot of time on this, I'd really appreciate any help or other suggestions on what to do.
Solved!
Go to Solution.

As far as I know, all Comcast modems are just bridges...no firewalls in them at all.... The other possibility is that your IT dept at work is blocking the traffic...have you tried this from any other place outside your LAN?
Tomato 1.25vpn3.4 (SgtPepperKSU MOD) on a Buffalo WHR-HP-G54
D-Link DSM-320 (Wired)
Wii (Wireless) - PS3 (Wired), PSP (Wireless) - XBox360 (Wired)
SonyBDP-S360 (Wired)
Linksys NSLU2 Firmware Unslung 6.10 Beta unslung to a 2Gb thumb, w/1 Maxtor OneTouch III 200Gb
IOmega StorCenter ix2 1TB NAS
Linksys WVC54G w/FW V2.12EU
and assorted wired and wireless PCs and laptops

Two phones ordered, only one shipped. The iPhone 6 has shipped with tracking number and charge to my card. iPhone 6 Plus has no information available, no one at CS can tell me if this is normal, if it is delayed, any info appreciated.

I placed an upgrade order for two phones, an iPhone 6 and 6plus.
I was in the Verizon shopping cart at 11:55 and checked out by 12:01 AM pacific time.
I do have my email confirmation for both phones with ship date 9/19
The iPhone 6 has shipped with tracking number and the charge to my card came through for the price of this phone.
There is no other information available - nothing on the status of the 6 Plus. Customer service doesn't know if this is normal or if my order went through, its really bad.
Any further information would be much appreciated.

I was just told by a Verizon sales rep that, when her team got in, when she checked the system at 3:03 (midnight+ 3 minutes) all 6Plus had a back order date of October, and now its going into November even though the pre-order system was showing 9/19 - that all verizon iphone 6 plus had an instant sell out.
She had no additional information on my iPhone 6 plus, not even if there was a chance for it to ship out, when the back order date would be - no further information.
(A different rep I talked to said all iphone 6 plus pre orders had a ship date of October, all of them - I asked what Verizon is going to do when they advertised iphone 6 plus for 9/19 delivery and your telling me they never had any available - at this point he transferred me... *****)

Two VRFs into Only One

Similar Messages

Maybe you are looking for