Two widgets, One slide- audio issues

Hello,
I am currently working on a project and have two widgets on one slide, that will play audio when a user clicks on the individual labels:
When I preview, the widget on the right will not play any audio (the left does). I have tried everything: refreshing, deleting/adding back audio, duplicating the slide, making sure the widgets don't touch, etc and it still won't work. Has anyone had this issue or am I not supposed to use two widgets on a slide?
Any help is appreciated!
Thanks,
Jasmine

Hi,
Thanks for the reply! I am in 7.0.1 and I double checked and absolutely nothing is overlapping on the widgets--not even the placeholder box. I even tried to make sure that it wasn't b/c the first widget wasn't overlapping on the timeline, but that wasn't the case.
I should be able to have both widgets up at the same exact time, playing audio when clicked on, correct?
Here is my timeline, if that helps any:
Thanks again for the help!

Similar Messages

Two Thunderbolt Displaysand USB Audio Issue

I have a brand spanking new Macbook Pro 15" Retina (2.7 Ghz, 16GB RAM, discrete graphics chip). I also have two thunderbolt displays, one is about a year and a half old, the other is pretty new.
I also use an Apogee Duet 2 USB sound card.
If I plug the USB soundcard into my Thunderbolt USB, after a few minutes the audio is all distorted. I've so far resorted to using a USB port on the MBP itself, which fixes the issue.
Is there a "Best practices" guide for how to connect up these displays? I currently have them daisy chained, so I have just the two cables going into my Mac which I wanted. Is there a better way to hook this up for reliability sake?

I have this exact same issue. I wish there was a fix but I have been looking for a while. Apple must know about it!

SoftPhone over VPN audio issue

Having a "one-way" audio issue when IPC connects over VPN to any Main Office IP Phones (7960). Remote IPC (softphone) shows "0 Received" Packets, but the IP Phone shows them as being sent.
This does NOT happen if IPC contacts another IPC on a PC at Main Site, or any kind of phone at the other branch offices.
Have looked at all of the audio settings on the VPN IPC unit, they are correct.
Any ideas?

Try to sniff the Ethernet traffic during call setup at the CallManager. When Callmanager sends Call Control messages to remote party, it could send wrong IP address or UDP port as an RTP parameters.
Another components could block the traffic are firewalls. How do you have your VPN tunnel built? Do you use Cisco VPN Client? What terminates your VPN traffic at the central location? PIX, VPN3000 or Router? Traffic may go one way without a change, and some protocol FixUp may be triggered for this traffic on the way back. If you have access to firewall logs, check if you have any traffic dropped.
Good luck,
Mike
http://www.headsetadapter.com

One way audio over VPN

I have 2 Cisco 1941 routers with a standard IPSec tunnel between them. Data works fine, but VoIP is encountering a one way audio issue where the remote site calling cannot be heard but they can hear me. This seems to match what I'm seeing in encaps and decaps. The quesion I'm having is why would the remote site be encapsulating all packets but the office router isn't decaping these audio packets. I isolated one phone specifically so that's why the SA is for only 1 host.
Thanks!
OFFICE ROUTER
   protected vrf: (none)
   local ident (addr/mask/prot/port): (192.168.0.0/255.255.0.0/0/0)
   remote ident (addr/mask/prot/port): (10.90.91.6/255.255.255.255/0/0)
   current_peer REMOTE_IP port 4500
     PERMIT, flags={origin_is_acl,}
    #pkts encaps: 4104, #pkts encrypt: 4104, #pkts digest: 4104
    #pkts decaps: 375, #pkts decrypt: 375, #pkts verify: 375
    #pkts compressed: 0, #pkts decompressed: 0
    #pkts not compressed: 0, #pkts compr. failed: 0
    #pkts not decompressed: 0, #pkts decompress failed: 0
    #send errors 1, #recv errors 0
     local crypto endpt.: 192.168.0.227, remote crypto endpt.: REMOTE_IP
     path mtu 1500, ip mtu 1500, ip mtu idb GigabitEthernet0/0
     current outbound spi: 0x69C77389(1774678921)
     PFS (Y/N): N, DH group: none
     inbound esp sas:
      spi: 0xEA4A3FF9(3930734585)
        transform: esp-3des esp-sha-hmac ,
        in use settings ={Tunnel UDP-Encaps, }
        conn id: 2095, flow_id: Onboard VPN:95, sibling_flags 80000046, crypto map: VPN_MAP
        sa timing: remaining key lifetime (k/sec): (4409444/1207)
        IV size: 8 bytes
        replay detection support: Y
        Status: ACTIVE
REMOTE ROUTER
   protected vrf: (none)
   local ident (addr/mask/prot/port): (10.90.91.6/255.255.255.255/0/0)
   remote ident (addr/mask/prot/port): (192.168.0.0/255.255.0.0/0/0)
   current_peer IP_OFFICE port 4500
     PERMIT, flags={origin_is_acl,}
    #pkts encaps: 4055, #pkts encrypt: 4055, #pkts digest: 4055
    #pkts decaps: 4099, #pkts decrypt: 4099, #pkts verify: 4099
    #pkts compressed: 0, #pkts decompressed: 0
    #pkts not compressed: 0, #pkts compr. failed: 0
    #pkts not decompressed: 0, #pkts decompress failed: 0
    #send errors 0, #recv errors 0
     local crypto endpt.: IP_REMOTE, remote crypto endpt.: IP_OFFICE
     path mtu 1500, ip mtu 1500, ip mtu idb GigabitEthernet0/0
     current outbound spi: 0xEA4A3FF9(3930734585)
     PFS (Y/N): N, DH group: none

Thanks Michal.
1) I have taken these buffer captures. The capture associated with "outside" is short when compared with the number of packets from the "inside" capture in the amount that is most likely associated with the call we placed.
2) Not NAT at all.
3) No CBAC or ZBF, unless some default that I'm not aware of. Not sure off hand how to disable those.
I did get this case through to TAC but after 3 hours we are left at comparing the capture buffers.

Audio problem with one episode of iTunes tv show on two apple tvs but audio works fine on same show on iMac

I have a season pass to Dr Who and all 30+ other shows purchased on iTunes work great. Last night's episode (Hide) has a hissing sound so loud it drowns out all the audio in the show when i try to watch it on my Apple TV. I then downloaded the episode to my iMac and my iPad and no audio issues there. However when I tried playing it shared from my iMac to the Apple TV and the audio problem was there again. Same thing happened when I tried to AirPlay from my iPad to Apple TV.
I have two Apple TVs. One is latest model w latest upgrade, the other is generation before without latest upgrade. Same audio issue on both. I have tons of iTunes TV shows and movies and this is the only episode with an issue. Something is wrong with this file that causes it to screws up the audio on Apple TV.
Has anyone else seen this kind of audio issue specific to just one TV episode or movie? Anyone know support path for iTunes problems?

If other episodes play Dolby Digital fine this could be a file encoding problem - they sometimes get it wrong.
I suggest you all contact Apple about the problem via itunes store support here:
https://expresslane.apple.com/

Can you copy multiple audio (text to speech) files from one slide onto a new slide at once?

Can you copy multiple audio (text to speech) files from one slide onto a new slide at once? OR do you have to copy and paste each line of text to speech and insert into new slide?

Hi there
I believe that you end up with a single file that you can use. Once you get that created, it's an audio file in the library. You may then add the audio file to another slide or object by looking in the Library after choosing to add audio.
Cheers... Rick

When I have two clips, one above the other, I would like to hear the audio from one at a time. How do I suppress temporarily one of that, in a easier way? Thank you.

When I have two clips, one above the other, I would like to hear the audio from one at a time. How do I suppress temporarily one of that, in a easier way? Thank you.

I would think you would drop down the audio level lines in the "Stereo" tab (FCP 6.0.6 view to me) in the clip's video window.
But then again, in my old version, I can't play two clips at once. But I figure if the newer FCP allow you to do that, then that's what I would do.

Is it possible to sequence audio files on one slide

Problem: One audio clip starts playing before the previous audio clip has ended.
Setup: On one slide I have multiple audio clips, dragged in from the media browser. Using the build tools in the inspector I've set up clip 1 to play after an image appears, so the first audio clip is build 2. Then for the second audio clip I set it up as build 3 to start automatically after build 2.
The result is that the both audio clips start at the same time. The only way I can get the clip2 to start after clip1 is to add a delay to start of clip2.
I tried inserting a "build out= stop audio" after clip 1, adding enough duration to make sure that the clip could play in its entirety but that appears to cause clip1 to not play.
I'd appreciate any pointers on how to sequence these audio files, preferably within keynote because I'm attempting to get the audio to sync with images appearing on the slide.
Thanks.

The original post had it correct:
The result is that the both audio clips start at the same time. The only way I can get the clip2 to start after clip1 is to add a delay to start of clip2.?
open the build order window; Animate > Build In > Build Order
In this example the first sound file is set to play after the shape has built in
the second sound file is set to play with a delay of 3 seconds because the first sound file has a duration of 2.5 seconds, this plays the file immediately after the first is finished playing.

Insert two photos on one slide in iMovie 11?

I'm fairly new to iMovie but have had experience with Powerpoint presentations.
I am doing a project that has a lot of picture elements inserted in it. Is there a way I can place two photos in one frame and have them transition onto it? To make this clearer...one photo say goes to the left in frame, says in the shot, then the next photo pans right and both can be viewed on the one slide??
~Thank you

While you can use Photos in iMovie... it does not excel at it. You would be better off with something like Photo to Movie then importing that as part of your video project. BUT even with that tool it really does not support have 2 or more pictures on the screen at one time.
http://www.lqgraphics.com/software/phototomovie.php
You could use a program like Photoshop and do it there and use those photos or use Final Cut are the (2) ways I can think of.
-- Dan
Keeper of TheUnofficialiMovieFAQ.com

Please help: Two-Sided One-to-One Mapping issues warning when owned instance does not exist

Hello,
Is it expected behavior? I have two classes A and B, B references A and its
foreign key column is its PK
A owns B (marked as inverse-owner in JDO metadata) when I access A.getB() if
B does not exist I get a warning.
Is it to be expected? Does two sided relation always require presence of
both sides of the relation and does nto fit my need?
Is there any way to have bi-directional association in my case with owned
record being optional?
Should I use two simple one sided one-to-one or may be simple one sided from
child to owner and One-to-One with Inverse Columns from owner to child
What are disadvantages of using two one sided (simple and inverse) vs.
two-sided?
Thank you
Alex

Here is what I had to do to solve this issue:
Basically I had to add the MSSQL TCP/IP port as an end-point in Azure. After I did that, then I was able to create the data-source. However, I was only able to authenticate with a SQL account, as any domain account would return me an error saying that the
domain isn't trusted.
What puzzles me here is how come the Data Source Manager would inform me that an account username/password was invalid, but it would fail/timeout if I provided valid credentials (!?!?!!?)

Audio file not playing when previewed or pulised on only one slide

I have one slide that the audio will not play unless the you click on the play button in preview or when published. All other slide audios are working fine and will play automtically when the next button is clicked on the previous slide. I have tried changing the name of the audio file, deleting the sled and the fiel and staring over etc. the audio file were created in another program and then brought into Captivate but thia has not been a problem with any other production up to this point. Any suggestions?

I will be out of the office starting 22/10/2009 and will not return until
28/10/2009.
If you require urgent assistance then please contact Emma Dawson on 15832
alternatively I will respond to your query on my return.

Audio not working on one slide when publishing to HTML5

I'm in Captivate 8. In one slide in my project no slide audio will play when published to html5. I've tested in Chrome and IE 11. In Chrome, I see the 'speaker' icon that appears when audio or video is running but no sound comes up. (The speaker appears for the length of the audio file ~5 sec) All other slides are fine, and the slide audio plays correctly if I use F3 or F10 to preview the slide inside Captivate.
The slide in question is a 'menu' only reached via an advanced action. I know the advanced action is not the culprit - if I change it to jump to a different slide, the audio on that slide plays without problem.
Similarly, I've verified that if I place this audio file on a different slide, it plays fine, but if I add a different audio file to this slide the problem remains. If I create a button on the problem slide to trigger the audio it plays, (but is unhelpful since I want the audio to play automatically when the user enters the slide).
I've tried removing/re-adding the audio, recreating the slide from a copy, setting the audio to play via an "on enter" advanced action, and adding a play trigger to the advanced action that jumps to this slide. Nothing I've tried gets the audio to play.
I'd welcome any suggestions of what might be happening or how to fix this.
Thank you,
Jenny Nilsson

Hi Lieve,
Thank you, yes, if I view using f12 the audio works correctly.
The "exitBranch" action is associated with a continue button at the end of each branch. If all branches have been visited, it jumps to a new slide, if there are unvisited branches, it jumps back to the menu slide where the audio is not working. (If I edit the action to jump somewhere else the audio will work for the different slide.)
The action was created from a shared action and my colleague and I have used it in multiple other modules without this error.
Thanks,
Jenny N

Can I make two column in one slide?

Hello, Everybody, I want to know about can i make two column in one slide. One column is demonstration and second column is to make the assessment that is teaching from one column. I can make one slide is demonstration and second is making assessment. But I don't want to do that for the learners. The learners can learn from the one column and can make assessment in the second column. Is it OK or not. Please give advice. Thanks!!!

Hi GreenLands,
Having both demo and assesment action in one slide is not possible in captivate. The learner should watch the full demo and then be tested through assessment or training.
Thanks
Devraj

HT1583 When I render my project in IDVD, video and audio runs properly, but when I burn it in professional quality and burning is finished there was no audio on the last two chapters, one audio is attached to the clip and the other one is from itunes, pls

Hi, please help me When I render my project in IDVD, video and audio runs properly, but when I burn it in professional quality and burning is finished there was no audio on the last two chapters, one audio is attached to the clip and the other one is from itunes, pls help

Hi
My first two thoughts
• Shared to Media Browser - BUT as Large or HD - try Medium !
• audio from iTunes - use to go silent
- in iTunes
- Create a new PlayList with needed audio
- BURN this as a standard Audio-CD (.aiff) - NOT .mp3
- use the files on this CD in Your Movie project - I ALWAYS DO - and only use .aiff ever - never .mp3'
My notes on this:
No audio on DVD disc.
Most common origin.
1. Imported audio from iTunes.
• In iTunes copy out as an Audio-CD .aiff (Same as played on standard Stereo CD - no .mp3)
• Use this in Your movie project
2. Low - Free Space on Start-up/Boot/Internal/Mac OS Hard disk makes it hard for iMovie to work as intended.
Down to 1.3 GB and it doesn’t work - especially audio don’t migrate over to Media Browser
(iM’08 & 09)
3. Material in iMovie’08 & 09 - Shared to Media Browser and here selected as Large
large.m4v. It silenced out this project in iDVD. By making a slight alteration - provoking it to ask for a new Share/Publish to Media Browser and here selecting 640x480 - and audio was back when a new iDVD project was created including this movie.
Minuscular - - 176x144
Mobile - - - - - 480x360
Medium - - - - 640x480
Large - - - - - - 720x540 960x540
HD - - - - - - - - 1280x720
4. Strange audio formats like .mp3, .avi etc.
• Change them to .aiff. Use an audio editor like Audacity (free)
5. Main audio is set to off in System Preferences - Does this by it self - Don’t know why
Cheque Audio-Out resp. Audio-In
6. Ed Hanna
Had the same problem; some Googling around gave me a kludgy, but effective fix
Downgrade Perian from recent versions back to version 1.0.
That worked for me, and so far I haven't encountered any deficiencies — except it takes more advanced versions of Perian to enable QuickTime to handle subtitles in .srt format — that I have noticed.
7. GarageBand fix.
In this set audio to 44.1 kHz (Klaus1 suggestion)
(if this don’t work try 48 kHz - me guessing)
Before burning the DVD.
• Do a DiskImage (File menu and down)
• Double click on the .img file
• Test it with Apple DVD-player
If it’s OK then make Your DVD.
Burn at x1 speed.... (or x4)
• In iDVD 08 - or - 09
• Burn from DiskImage with Apple’s Disk Utilities application
• OR burn with Roxio Toast™ if You got it
Yours Bengt W

Play diffenrent audio on different rollover captions on one slide

Help!!! I currently have 6 rollover caption on one slide and
I assign complete different audio files to each. But when I preview
it, all the rollover caption plays the same audio of only 1 out of
6--is there a way to have each plays its own audio?
I also tried replace one of the rollover caption with
rollover slidelet with a text caption and audio-- it didn't change
the situation at all.
Thanks!

In Captivate version 3 the audio can be added to either the
rollover area, or the rollover caption. Do NOT add audio to the
rollover area. Add it only to the rollover caption. If audio exists
at all on the "rollover area", remove it and add it instead to the
caption.
To reiterate, add audio to the Audio tab for the object, not
the rollover area. And keep in mind that the rollover object (the
caption) is NOT on the timeline ... only the "area" is shown on the
timeline, so you will have to go to the object on the stage and
open it to add audio. Hopefully that will help solve your problem.
Welcome to the posters of the Captivate user community,
smokingcat!

Two widgets, One slide- audio issues

Similar Messages

Maybe you are looking for