Two wireless computers lock each other

I'm running a imac (10.4.11) connected with ethernet to an airport extreme. My macbook (10.4.11) is connected wirelessly through secured network.
I bought a mac mini (10.6.2) and when I connect it through my network, the internet connection to the macbook locks up. If the activity stops for one computer the other computer can then receive data.
Please help

Got it!
I checked the box for "allow network to be extended". That changed the number of clients to two and now both computers seem to be working fine.
I still can't stream video on them at the same time but I'm sure that is my connection speed and not interference between the computers.
Message was edited by: jcr2wd

Similar Messages

Two wireless connect to each other but not the hardwire

Hello all, I have a wrk54G with Firmware 1.55.02 and two wireless access points. The two wireless access points I've been able to set up to share files just fine.
The trouble comes when I try to bring in the computer that is hard wired to the router. It can see the two other computer but when I try to access them, the system says they are not there.
I'm new to all of this and I feel like I've been going around in circles.
I've read and printed out all of the material that I can find on this, from here as well as Microsoft, so I know that I have all of the needed protocols loaded and the proper connections made.
Any thoughts?????
Thanks

have you tried disabling the firewall or antivirus on that specific computer first to see if that is what's causing the problems... it may be blocking your PC to be seen on the network
"a helping hand in a community makes the world a universe"

If the "unresponsive script" dialog box appears while another dialog box (e.g. a "Save As" box), the two dialog boxes lock each other out

FF 7.0.1 on MacOSX 10.6.8 (not this machine!)
While doing a "Save As", and while the "Save As" dialog box is showing, a second dialog box "unresponsive script" shows up. I can't deal with the "unresponsive script" box as it doesn't have focus, and I can't complete the "Save As" operation because its script has become unresponsive. I end up having to Force-Quit Firefox via the Activity Monitor.
Any less brutal suggestions?

figured it out:
- power off mac and turn back on while holding down Command + R (dont do it on an external keyboard just to be safe)
- choose the re-install Lion option (I'm sure there is another way to re-install Lion, this is just the way I did it, not saying its the best or only method)
- DO NOT INSTALL MACBOOK (Mid 2012) Software Update 1.0 - THIS SCREWS ADOBE UP!

When using the migrate tool to migrate from windows to mac, can you use ethernet to connect the computers to each other?

When using the migrate tool to migrate from windows to mac, can you use ethernet to connect the computers to each other? In the Migration tool, I was only given the option of choosing the computer when it appeared on the same network, and didn't see an option to connect them to each other. Even though they're both connected to the same network with a wired connection, the migration is painfully slow.

Yes. The following quotation is from About Windows Migration Assistant
These are the preferred network connections, in order:
Use a CAT6-certified Ethernet cable that is in good condition to connect the Ethernet port of the PC directly to the Ethernet port of the Mac or Ethernet adaptor (USB or Thunderbolt). You shouldn't use an Ethernet cable that has any kinks in it or is missing connector tabs.
Use CAT6-certified Ethernet cables that are in good condition to connect the Mac and PC to your home network router/hub/switch. You shouldn't use an Ethernet cable that has any kinks in it or is missing connector tabs.
For wireless, use the fastest wireless signal possible (802.11n 5Ghz). Try to have the PC, Mac, and the wireless access point all in the same room close to each other.

HT3263 I am trying to transfer files from my MacBook Pro (using Mac OSX 10.6.8) to MacBook Air (Mac OSX 10.7.4) using Migration Assist via WiFi connection. The two macs cannot find each other. any suggestions

I am trying to transfer files from my MacBook Pro (using Mac OSX 10.6.8) to MacBook Air (Mac OSX 10.7.4) using Migration Assist via WiFi connection. The two macs cannot find each other. any suggestions

Try this article - http://support.apple.com/kb/HT4889.
If it doesn't help, post back in this thread.
Best of luck,
Clinton

Can two RMI Servers talk each other

Can two RMI Servers talk each other ?
For it to happen, does one of them be dependent on another ?

1. Absolutely.
2. No

Two sessions are blocked each other in

Hi All,
My database is Exadata machine. 11.2
These days we encountered one case, that is two sessions are always blocked by each other. I get this info from v$session blocking_session.
For examle, the information looks like
sid blocking_session event
1 2 libarary cache lock
2 1 row cache lock
and as you know there are many other sessions are blocked by sid 1.
By lookiing up v$sql, I got the sql for these 2 sessions.
/* QSMQ VALIDATION */ ALTER SUMMARY "XXXXX"."Gxxx_CP_CAL_TIME_TEMP_MV" COMPILE
/* QSMQ VALIDATION */ ALTER SUMMARY "XXXXX"."Gxxx_CP_CAL_TIME_MV" COMPILE
Both of these 2 MV share some underlying objects. And both of the 2 sessions started at the same time roughly.
If the compilation incurs the lock on the object, why the 2 sessions block each other?
Can someone give me some tips,please?
Best regards,
Leon

Leon,
sid blocking_session event
1 2 libarary cache lock
2 1 row cache lockYou are saying that above situation does not cause a deadlock error to be generated in either one of those two sessions?
/* QSMQ VALIDATION */ ALTER SUMMARY "XXXXX"."Gxxx_CP_CAL_TIME_TEMP_MV" COMPILE
/* QSMQ VALIDATION */ ALTER SUMMARY "XXXXX"."Gxxx_CP_CAL_TIME_MV" COMPILEThese to me look like programmed 'ALTER SUMMARY' commands (the comment in front of the statement seems to indicate so). It's the application that's doing this right?
- Can you reproduce this with two sqlplus sessions?
- Why is the application compiling the MV's? Are underlying objects being altered frequently?
- Should the application not just be 'refreshing' the MV's instead of compiling them?
Just some thoughts.
Toon
Edit:
Dom's right. The alter summary statements seem to be Oracle internal calls generated by DBMS_MVIEW.REFRESH executions.
Edited by: Toon Koppelaars on Nov 24, 2011 10:41 AM

How to print two tables adjacent to each other?

Hi,
Scenario
I have a form with a body page and two tables. The property of the body page is set to 'Flowed', 'top to bottom' as flow direction and the check box for page break is set.
Requirement
The two tables need to be printed adjacent to each other.
Approach followed until now
1. Since the body page is 'Flowed' type, the two tables are placed one below the other (Tab1 & Tab2). So I tried to set the Flow direction of the Body page to 'Western text'. But this did not solve the issue as since it is set to 'western text', only after Tab1 is rendered, table Tab2 starts printing itself, which is not desired. Both the tables should be printed at the same time.
2. I wrapped both the tables in one sub form with 'Type' set to 'Positioned' and set the check box for page break. Now I arranged the tables adjacent to each other. But the check box for page break for both the tables were disabled and because of this if there is not enough space to print the total records of both the tables, the complete tables is shifted to another page leaving the previous page blank.
Kindly suggest how to resolve this issue.
Regards
s@k

Dear Andres,
I tried as per you suggestion and it works fine. Thanks a lot.
Now adding to this, I am trying to print the 'formatted text'. The tables have two columns. the first column is a normal field and the second column is table having the 'formatted text'.
As per your suggestion, I concatenated the two tables in one table. So the final table has 2 normal fields and 2 tables.
Final table structure:
Column1 Column2(Table) Blank Column3 Column4(Table)
Settings maintained:
I have set the 'Body' row of the table to 'Flowed' with direction as 'Western text' (Top to bottom does not help ).
The settings for Column 2 & 4 (tables) are maintained as:
1. The Table is set to 'Flowed' with direction 'Top to Bottom'.
2. The body row is 'Flowed' with direction 'Western Text'
(The Border 'Edges' for the tables, columns is maintained as 'None')
Issue:
The sample data has around 10 entries in the (final) table. When I try to print the form, if column2(table) is initial, the data in Column3 and 4 are shifted towards Left hand side.
Kindly suggest how to resolve this issue.
Regards
s@k

Delete masterdata from two infoobjects which have each other as attribut

Hello,
we have the infoobject 0BPARTNER und 0CUSTOMER which have each other within as an attribut.
0BPARTNER
Attribute 0CUSTOMER
0CUSTOMER
Attribute 0BPARTNER
Now we want to delete the master data from both of them. But it's not possible the delete in RSA1because of the assignment to each other.
Can you help me?
Best regards
Stefan

Hi Stefan:
Do you want to delete ALL the Master Data records from the 2 InfoObjects? In case you need to do this on your DEVELOPMENT environment, then you could use Tcode SE14 to delete the CONTENTS from the SID table, Master Data Table, etc., please be aware that you need to use Tcode SE14 very carefully, because you could also delete the physical tables and not only the contents.
*Important: Also note that it is not recommended to use SE14 on your PRODUCTION environment, unless you perfectly understand the implications (you would need to reload your DSOs or Cubes).
Regards,
Francisco Milán.
Edited by: Francisco Milan on Jun 15, 2010 10:48 AM

How to restrict two employees from viewing each others' activities in a particular account?

Dear Experts,
I have a scenario here and request your kind input to bring a solution to it.
I have two sales org. in one company. One is SO1 and other one is SO2. I want to restrict the sales employee of SO1 and SO2. Both of them are working in the same national account. I don’t want the SO1 sales employee to see what the SO2 sales employee does in that particular account; and the vice versa. So, it’s just restricting the view of particular account for both of them. Is it possible in CRM? If yes, how do you do that?
Looking forward to the right solution.
Thanks & Regards,
SMTP

Hi SMTP,
This can be done by using authorization profiles. Here we need to crete two Authorization objects separately such a way that each of them should be allowed to one sales organization. And then assign these Authorization objects to users, based on their sales organization(Your requirement).
You need to reach your Basis Consultant and explain the scenario.Basis people can easily do this.
Thanks & Regards
Ravi

HT1660 if i create a copy in mp3 format in itunes from the mp4 music i already have in itunes it puts both formats in the same file is there a way of seperating the two formated albums from each other completely but keep them in itunes

HAVE CONVERTED MY ITUNES MUSIC INTO A SECOND FORMAT OF MP3. WHEN I DID THIS IT COPIES THE MP3 FORMAT DIRECTLY INTO THE SAME FILE. THEN IT SHOWS TWO OF EACH SONG IN THE MUSIC FILE IN MP3 AND MP4. WOULD LOVE TO SEPERATE THEM INTO DIFFERENT FILES LIKE WINDOWS MEDIA PLAYER DOES WITH WMA AND MP4 IT CREATES A SEPERATE FILE FOR THE MP4 FILE DIRECTLY IN THE WMP MUSIC FOLDER THAT YOU CAN CLICK ON. QUESTION IS CAN IT BE DONE IN ITUNES IS THERE SOMETHING I CAN CLICK ON IN ITUNES THAT WILL SEPERATE THESE TWO FORMATS FROM EACH SO IT WILL BE EASIER FOR ME TO PICK WHEN NEEDED WHICH ONE I NEED WITHOUT DOING IT ONE SONG AT A TIME. THANKS PLEASE HELP!!!

Select the Songs view. Use the Search window to display the tracks from the album. Turn on the Kind column and sort on it. Give each version of the album a distinct title. E.g. Album [AAC] and Album [MP3].
See Grouping tracks into albums for tips on iTunes organization.
tt2

Assigning two dimensional array to each other

Hi All,
I have two two-dimensional arrays and I want to assign one's second dimension's values as the other's second dimension's values in this way:
        int userCounter = 0;
        for (int userID : mostCommonUsers) {
            reducedTrainingVectorForSimilarity[userCounter] = trainingVectorForSimilarity[userID];
            userCounter++;
        }In the above code, I have an *"ArrayList<Integer> mostCommonUsers"*, and iterate through this. I'm using the values inside this array list, as a first dimension's index number of the *"trainingVectorForSimilarity"*, and assigning all the values in the second dimension to the left-hand-side array's second dimension. Both array has fixed length of second dimension. So, am I right by doing this, or I should make a for-loop to iterate over the individual values on the second dimensions of both arrays?
Another similar question: In the below code, *"trainingVectorForSimilarity"* is an *"float[][]"*, so basically I assign all the second dimensions' values into a newly created array named *"trainingUserRatings"*. Again, I assumed that if the corresponding first dimesion's second dimension values will be assign without any iteration over each values.
for (int i = 0; i < trainingVectorForSimilarity.length; i++) {
            float[] trainingUserRatings = trainingVectorForSimilarity;
similarity[i] = calculateCosineSimilarity(testingVectorForSimilarity, trainingUserRatings);
Am I right for both cases?

Here is the output for the code that you sent:
[[1, 2, 3], [4, 5, 6]]
[[1, 2, 3], [4, 5, 6]]
[[1, 2, 3], [4, 5, 6]]
[[1, 2, 3], [4, 5, 6]]
[[1, 2, 3], [4, 999999, 6]]
[[1, 2, 3], [4, 999999, 6]]
[[1, 2, 3], [4, 999999, 6]]
[[1, 2, 3], [4, 5, 6]]
[null, [4, 999999, 6]]
[null, [4, 999999, 6]]
[[1, 2, 3], [4, 999999, 6]]
[[1, 2, 3], [4, 5, 6]]I confused that even making an array copy still refers the same object but not a copy of that object. For example:
float[][] trainingVectorForSimilarity is defined and initialized.
            float[] trainingUserRatings = new float[trainingVectorForSimilarity.length];
trainingUserRatings = trainingVectorForSimilarity[i];
is the same withfloat[] trainingUserRatings = new float[trainingVectorForSimilarity[i].length];
System.arraycopy(trainingVectorForSimilarity[i], 0, trainingUserRatings, 0, trainingUserRatings.length);

Compare two dropdownlists values with each other!!!!!!

Hi ,
I have two dropdown s with some values i want to compare two dropdowns values. I have java script on the click event of the button it will compare values of drodpowns. If any redundant/duplicate value found then those values need to be deleted from the second dropdown.
function dummy()
var dd1=xfa.resolveNode(form1.Page1.State.somExpression);       //path to first dropdown
var dd2 = xfa.resolveNode(form1.Page1.Dummy.somExpression); //path to second dropdown
var i =0;
var j=0;
if(State.length!= 0)//State is first dropdown
     for (;i<dd1.length;i++)
          for(;j<dd2.length;j++)
               if(dd1.getDisplayItem(i)==dd2.getDisplayItem(j))
                   dd2.deleteItem(j);   //deleting the value from second dropdown.
                    break;
               else
                    continue;
But this function is not working properly it is taking first value of the DD1 and comapring with all the values of DD2 and coming out of the loop .There are other values in the DD1.So for that comapring is not happening.
Please help me !!!
Thanks in advance,
Bharathi.

Hi,
You just need to re-initialise the j variable each time though the i loop. As you have it the second time around j will already be equal to dd2.length so will skip the inner loop.
try
for(var j=0;j<dd2.length;j++)
Regards
Bruce

How does two ERP systems of two different release communicate each other?

Dear Experts,
i have a query regarding the communication method between two ERP Systems of different releases.
for example ECC6.0 and ECC4.7, how do i do the integration to make the communication happen?
Regards,
Binod Sahu

Hi,
You can use RFC for communication any version of SAP.
This is good and easy.
Regards,
Anil

Designer Configuration/ Users locking each other

I have Designer 9i installed in an education environment. We have about 100 users all sharing the same repository, with their own user accounts. They are reverse and forward engineering against their own db tables.
The system is grinding to a halt, some students are being locked out by others, and it can take half an hour to just get in to Designer.
Designer seems to be working with exclusive locks for this. Can I change this ? or is their another way I can configure Designer to keep performance in this situation ?
Any advice appreciated.

Hi,
The fourth point I presume B speaks and A can't hear rather than B himself.
Which SDK version are you using ? If you are using player 10 or 10.1 , can you try with 9 for once and see if you can reproduce just for a testing scenario.
I haven't seen this occuring . Moreover, if you can ,please tell me some activity that does reproduce this.
Thanks
Hironmay Basu

Two wireless computers lock each other

Similar Messages

Maybe you are looking for