Two wireless connect to each other but not the hardwire

Hello all, I have a wrk54G with Firmware 1.55.02 and two wireless access points. The two wireless access points I've been able to set up to share files just fine.
The trouble comes when I try to bring in the computer that is hard wired to the router. It can see the two other computer but when I try to access them, the system says they are not there.
I'm new to all of this and I feel like I've been going around in circles.
I've read and printed out all of the material that I can find on this, from here as well as Microsoft, so I know that I have all of the needed protocols loaded and the proper connections made.
Any thoughts?????
Thanks

have you tried disabling the firewall or antivirus on that specific computer first to see if that is what's causing the problems... it may be blocking your PC to be seen on the network
"a helping hand in a community makes the world a universe"

Similar Messages

My Mac is not syncing with my ipad or iphone. Entries on either my Ipad or Iphone syncing with each other but not to my Imac.

My Mac is not syncing with my ipad or iphone. Entries on either my Ipad or Iphone syncing with each other but not to my Imac.

iCloud: Troubleshooting iCloud Calendar
iCloud: Advanced Calendar and iCal troubleshooting
Sync Services: Advanced troubleshooting for contact and calendar syncing

My ipod is connect to wi-fi but not the keyboard

my ipod is connect to wi-fi but not the keyboard??????

WI do nort understand what you mean by "not the keyboard" Please provide clarification.

How to create a custom control of a button where the look will be applied to all others but not the Boolean text?

Hi all
I would like to create a customized button as a master so that if I change the look of the master all other buttons will change too.
I have done this with a custom control as a "strict type def" otherwise the look will not change BUT If I do this as a strict type def I cannot change the Boolean text anymore which should be different on every button.
How can I create a master control of a button where the look will be applied to all others but not the Boolean text?
Stay Hungry, Stay Foolish
Solved!
Go to Solution.

Steve Chandler wrote:
I don't think you can do that. I just looked and as I suspected the Boolean text property is read only for strict typedefs so you cannot use property nodes to change the text.
As a workaround just make it a typedef. When you want to change the look open the typedef and make it strict, make your changes, then make it non strict again. You will have to update the Boolean text again for all instances. Kind of a pain. Maybe this is something for the idea exchange.
Kudos for being sneaky.
I like these creative work-arounds!
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Blocking process each other but not killing..

Hello,
I have situation where 2 SPID's 82 and 112 blocking each other but deadlock monitor is not killing one of them. 82 is trying to get the shared lock on few pages of an object and got the shared lock on 1 page where as waiting on other. mean while Spid 112
got the exclusive lock on the page where 82 is waiting for and trying to convert the lock on other page where 82 already has a lock.
This is perfect dead lock situation but SQL Server is not detecting it as dead lock so not killing one of the process.
This is on SQl Server 2008 R2 SP2 , can you please tell me why is this not being resolved by SQL Server?

I have the sp_locks for both the process here and filtered for the object which is causing it... hope this will help to see this clearly.
spid
dbid
ObjId
IndId
Type
Resource
Mode
Status
82
32
0
0
DB
S
GRANT
82
32
1272391602
0
TAB
IS
GRANT
82
32
1272391602
1
PAG
1:209437
S
WAIT
82
32
1272391602
1
PAG
1:209436
S
GRANT
spid
dbid
ObjId
IndId
Type
Resource
Mode
Status
112
32
1272391602
1
PAG
1.052083333
IX
GRANT
112
32
1272391602
2
PAG
1:12188
IX
GRANT
112
32
1272391602
1
PAG
1:295103
IX
GRANT
112
32
1272391602
1
PAG
1:295137
IX
GRANT
112
32
1272391602
1
PAG
1:295141
IX
GRANT
112
32
1272391602
1
PAG
1:295145
IX
GRANT
112
32
1272391602
1
PAG
1:295149
IX
GRANT
112
32
1272391602
1
PAG
1:295151
IX
GRANT
112
32
1272391602
1
PAG
1:295152
IX
GRANT
112
32
1272391602
1
PAG
1:295155
IX
GRANT
112
32
1272391602
1
PAG
1:295157
IX
GRANT
112
32
1272391602
1
PAG
1:295163
IX
GRANT
112
32
1272391602
1
PAG
1:295165
IX
GRANT
112
32
1272391602
1
PAG
1:295167
IX
GRANT
112
32
1272391602
1
PAG
1:295104
IX
GRANT
112
32
1272391602
1
PAG
1:295117
IX
GRANT
112
32
1272391602
1
PAG
1:295120
IX
GRANT
112
32
1272391602
1
PAG
1:295122
IX
GRANT
112
32
1272391602
1
PAG
1:295126
IX
GRANT
112
32
1272391602
1
PAG
1:295128
IX
GRANT
112
32
1272391602
1
PAG
1:295134
IX
GRANT
112
32
1272391602
1
PAG
1:295172
IX
GRANT
112
32
1272391602
1
PAG
1:295445
IX
GRANT
112
32
1272391602
1
PAG
1:295446
IX
GRANT
112
32
1272391602
1
PAG
1:295441
IX
GRANT
112
32
1272391602
1
PAG
1:295488
IX
GRANT
112
32
1272391602
1
PAG
1:295489
IX
GRANT
112
32
1272391602
1
PAG
1:300960
IX
GRANT
112
32
1272391602
1
PAG
1:307594
IX
GRANT
112
32
1272391602
1
PAG
1:307593
IX
GRANT
112
32
1272391602
1
PAG
1:308187
IX
GRANT
112
32
1272391602
1
PAG
1:308185
IX
GRANT
112
32
1272391602
1
PAG
1:308188
IX
GRANT
112
32
1272391602
0
TAB
[UPDSTATS]
X
GRANT
112
32
1272391602
0
TAB
IX
GRANT
112
32
1272391602
1
PAG
1:714003
IX
GRANT
112
32
1272391602
1
PAG
1:713990
IX
GRANT
112
32
1272391602
1
PAG
1:713929
IX
GRANT
112
32
1272391602
1
PAG
1:713164
IX
GRANT
112
32
1272391602
1
PAG
1:713166
IX
GRANT
112
32
1272391602
1
PAG
1:713145
IX
GRANT
112
32
1272391602
1
PAG
1:713136
IX
GRANT
112
32
1272391602
1
PAG
1:713123
IX
GRANT
112
32
1272391602
1
PAG
1:713118
IX
GRANT
112
32
1272391602
1
PAG
1:713113
IX
GRANT
112
32
1272391602
1
PAG
1:197314
IX
GRANT
112
32
1272391602
1
PAG
1:197312
IX
GRANT
112
32
1272391602
1
PAG
1:203702
IX
GRANT
112
32
1272391602
1
PAG
1:203700
IX
GRANT
112
32
1272391602
1
PAG
1:203216
IX
GRANT
112
32
1272391602
1
PAG
1:208860
IX
GRANT
112
32
1272391602
1
PAG
1:208856
IX
GRANT
112
32
1272391602
1
PAG
1:210118
IX
GRANT
112
32
1272391602
1
PAG
1:209450
IX
GRANT
112
32
1272391602
1
PAG
1:209449
IX
GRANT
112
32
1272391602
1
PAG
1:209443
IX
GRANT
112
32
1272391602
1
PAG
1:209442
IX
GRANT
112
32
1272391602
1
PAG
1:209447
IX
GRANT
112
32
1272391602
1
PAG
1:209433
IX
GRANT
112
32
1272391602
1
PAG
1:209437
IX
GRANT
112
32
1272391602
1
PAG
1:209436
IU
GRANT
112
32
1272391602
1
PAG
1:209436
IX
CNVT
112
32
1272391602
1
PAG
1:209425
IX
GRANT
112
32
1272391602
1
PAG
1:209391
IX
GRANT
112
32
1272391602
1
PAG
1:209366
IX
GRANT
112
32
1272391602
1
PAG
1:209363
IX
GRANT
112
32
1272391602
1
PAG
1:211926
IX
GRANT
112
32
1272391602
1
PAG
1:211370
IX
GRANT
112
32
1272391602
1
PAG
1:211369
IX
GRANT
112
32
1272391602
1
PAG
1:214621
IX
GRANT
112
32
1272391602
1
PAG
1:214273
IX
GRANT
112
32
1272391602
1
PAG
1:214274
IX
GRANT
112
32
1272391602
1
PAG
1:217073
IX
GRANT
112
32
1272391602
1
PAG
1:217072
IX
GRANT
112
32
1272391602
1
PAG
1:215976
IX
GRANT
112
32
1272391602
1
PAG
1:218335
IX
GRANT
112
32
1272391602
1
PAG
1:218334
IX
GRANT
112
32
1272391602
1
PAG
1:218308
IX
GRANT
112
32
1272391602
1
PAG
1:219454
IX
GRANT
112
32
1272391602
1
PAG
1:219448
IX
GRANT
112
32
1272391602
1
PAG
1:103959
IX
GRANT
112
32
1272391602
1
PAG
1:249456
IX
GRANT
112
32
1272391602
2
PAG
1:783866
IX
GRANT
112
32
1272391602
2
PAG
1:783848
U
GRANT

HT4191 Notes - my ipad and mac are synching to each other but not to iCloud?

i believe i have set up icloud properly. My Ipad and my Mac are synching Notes to each other but they are not synching properly to Icloud.
I have also set up Calendar to synch on all of the 2 devices and the Icloud and those three things all synch fine.
any thoughts?

As long as both devices are compatible with iCloud, it should work. When you say they sync with each other, does that mean via iTunes? Go to iCloud.com and check what if any content is being synced.
http://www.apple.com/support/icloud/

IPhone 6 Plus connects to Airport Extreme but not the internet

Light on my Airport Extreme is green and the Airport Utility on the iPhone 6 Plus shows that it's connected to the Airport, but not the internet. What the strange this is, I am still getting email and message notifications but just can't view them.
However the internet connection on both my iPad Air and Macbook Pro are working perfectly fine, and they are both connected to the same Airport Extreme.
The firmware on Airport is updated, I have tried to reset network settings and restarting the iPhone with no luck. Any suggestions on what to do?

Give me a screenshot of the working network IP setup on the MBP.
It should look like this. I need to see the IP address and you can also copy and paste for me the dns address.
The same thing from the iphone IP address and DNS will then help me figure out what is wrong.
If they both have an IP like 10.0.1.xx then the DNS or gateway (what apple calls router) has setup wrongly .. try setting manually with the same values exactly as the MBP.
If however the IP is something public like 200.100.2.100 and the other ipad is similar the Airport is setup wrongly in bridge and you have exhausted the available IP addresses so redo the setup of the Extreme so it is in router mode.

My iPod Touch 4G connects to access point, but not the internet.

I'm stuck for ideas, so any help is appreciated! I've gone through the troubleshooting guide, and none of that helped. I've reset my network settings, forgetting the specific network, resetting the router, resetting the iPod, restoring it to factory settings, upgrading to the latest firmware, and nothing has worked.
Sometimes, if I forget the network and reset my iPod, it may (but not always) work for that session. Whenever I try again, I have to repeat this process and HOPE it works.
I can't try on another network because that's not available to me and won't be for a while.
This happened really randomly. Nothing changed, and it's driving me mad. Any help is appreciated a lot!

Does it connect to the internet with other networks?
- If so that indicates a problem with your router. Likely time for a new router.
- If not that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Two wireless computers lock each other

I'm running a imac (10.4.11) connected with ethernet to an airport extreme. My macbook (10.4.11) is connected wirelessly through secured network.
I bought a mac mini (10.6.2) and when I connect it through my network, the internet connection to the macbook locks up. If the activity stops for one computer the other computer can then receive data.
Please help

Got it!
I checked the box for "allow network to be extended". That changed the number of clients to two and now both computers seem to be working fine.
I still can't stream video on them at the same time but I'm sure that is my connection speed and not interference between the computers.
Message was edited by: jcr2wd

Wireless connects via MAC address, but not with essid.

I have an eee 901 using the zeneee901 kernel. I got wireless to work out of the box to an extent. This will probably be easier to exlain just posting the commands.
ifconfig ra0 up
iwlist ra0 scan
iwconfig ra0 essid *essid here*
dhcpcd ra0
TIMEOUT GOES HERE
iwconfig ra0 ap MACADDRESS
dhcpcd ra0
Connected!
This wouldn't be so bad except I can'tuse Wicd. This was happening way before I installed Wicd btw.
What's the deal?

R00KIE wrote:The way you do it I don't know, but in wicd you can select an option to associate by essid instead of mac address and it works fine for me.
Someone else might be able to answer your question. Maybe you can consider using another network connection manager, would makes things easier. Although knowing why it doesn't work is also good
That's good, but I can't find that option. Where is it?

Have 2 ipods in same house, one will face tiem the other, but not the other way round.

Hi all, this is my 1st time posting for help, we have 2 ipod 4th generations in the house now, daughters bought in may, and sons this week, took a while to set up, but we got there, had to create a new e-mail for my son, daughter can facetime my son, but he cannot facetime her, it will ring at her end and then dissconnects, ive set the itunes web site up for something called home share, any advice would be great.

Try clearing your cache and cookies.
# Open the Tools menu, then select Clear Recent History... .
# In the '''Time Range to clear:''' drop-down, select '''Everything'''.
# Click the arrow next to '''Details''' to display the list of items that can be cleared.
# Select both '''Cookies''' and '''Cache'''.
# Click Clear Now .

HT202213 I can view the library from one pc on the other but not the other way?

I can view my wifes library on my pc in sharing but she cannot access mine. Any Ideas?

Hello tj2k15,
Thanks for using Apple Support Communities.
To troubleshoot this issue with Messages on your iPhone please follow the troubleshooting in the support article linked to below.
iOS: Troubleshooting Messages
Take care,
Alex H.

How can I rasterize a spot color file without creating "border" pixels between areas that are adjacent to each other but should not be overlapping?

We use Illustrator to create circuit layouts. For part of our process, we create an image of all of the layers using spot colors to show the printed layers overlapping each other. We then rasterize the file and send the image through a Matlab routine that performs some analysis of the circuits based on the colors of the pixels.
In some cases, I have created images with areas next to each other, but not overlapping. When rasterizing the image, the rasterizing process appears to treat the borders as overlapping and creates a single pixel wide border between the 2 areas when there is none. This is playing havoc with our Matlab routine.
I can manually go in and remove the rasterized border, however on some projects, this is a very lengthy process. Has anyone experienced anything like this, or have any ideas on how to prevent this?

Would align to pixel grid help?
Left is not aligned, Right is aligned to pixel grid

Problems with seeing computers on the network map but they are not able to connect with each other

Hi All,
We have 6 HP pavillion Slimline s3620f PCS(Pentium Dual COre ED200) with 10/100 and wireless connections. They are running Windows Vista Home 64. We are also trying to connect a macbook, a laptop with vista 32, and a a mac with win xp running via bootcamp. We upgraded to the WRT160Nv2 for wireless access.
We have the cable modem connected to the router. The router is connected to a switch. On the network map, all connections are working/green(can access internet). Before this, in the vista network map each computer could connect to the other. NOw each computer can only connect to the router and one particular other computer. Each computer lists itself and that one particular other computer and the router. If I look at the full map, all are listed but they cannot connect to each other.
I hope this makes sense. Any suggestions?
L

Your computer firewall is not recongnizing your router.
Greetings from Northern Ontario, Canada

Both can connect to test sites but not videochat with each other

I am using a 2GHz PPC iMac on 10.4.6 with external iSight. I can see the Apple ad from one of the test sites. My wife is using a G4 PowerBook running the latest Panther OS with external iSight. She is in a hotel but can also see the Apple ad from the test site. When she was home, we could videochat over Bonjour.
But, while she is in the hotel out of town, we couldn't videochat with each other. Whether one initiated or the other did, we both get the "XXX failed to respond" message even though we obviously did accept the videocall.
If we both can videochat with the test sites, how come we cannot videochat with each other?
Given the above, I hope some experts can rule out a bunch of stuff and let me know the finite (and small) set of potential reasons affecting our situation so that I can work on resolving this efficiently.
What could be the likely problem?
On my side, I use an Apple AEBS that uses DHCP and NAT but my iMac is manually set to 10.0.1.201. I have set the ports in Firewall but even when I turned off Firewall it did not work.
Any help is much appreciated.

Hi Heng-Yee Yong,
The test sites are most likely set to have the ports open by UPnP which does not use NAT.
If you modem is routing and is using Port Forwarding and the Airport is as well then you have two lots of NAT going on at your end.
I would Open Airport Admin Utilty (Applications/Utilities) and log on to the Airport
Go to the Network tab.
Deselect Distributing Addresses which wll trun off NAT in the Airport and make it a Wireless access device.
This means your computer will have to take an IP form the Modem.
This may not be rquired if the modem id is Bridge mode itself as this measn it is not routing and all port will be open without the use of NAT.
This App can help identify if NAT is a problem
http://bleu.west.spy.net/~dustin/projects/natcheck.xtp
Or at least whether you have Consistent NAT or not.
8:50 PM Wednesday; April 26, 2006

Two wireless connect to each other but not the hardwire

Similar Messages

Maybe you are looking for