Two wireless signals stopped while wired connections are fine

I have several computers wired to a router with good Internet access. For several years, my Airport Express and Netgear wireless signals were available to Macs, PCs, and an iPhone in the house. Now neither the Airport Express or Netgear wireless signals are available on Macs, PC, or iPhone. The signals were intermittent at first and now don't appear at all. Suggestions?

I have several computers wired to a router with good Internet access. For several years, my Airport Express and Netgear wireless signals were available to Macs, PCs, and an iPhone in the house. Now neither the Airport Express or Netgear wireless signals are available on Macs, PC, or iPhone. The signals were intermittent at first and now don't appear at all. Suggestions?

Similar Messages

  • Can I turn off the wireless and use the wired connections at the same time?

    Can I turn off the wireless and use the wired connections at the same time?
    This is to avoid transmission when I work without the need for wireless

    Yes, you can. Just open the web interface of the router. On your browser type the IP address of your router, usually http://192.168.1.1 go to wireless tab and disable it.

  • Just recently updated an iPhone 4 to iOS 7. Having trouble activating iMessage. It will not connect to network. Any help ?? All connections are fine other apple devices are working

    Just recently updated an iPhone 4 to iOS 7. Having trouble activating iMessage. It will not connect to network. Any help ?? All connections are fine other apple devices are working

    Hey X300X,
    Thanks for the question. I understand you are experiencing issues with iMessages. The following article may help to resolve your issue:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    You may also want to reset your network settings:
    Settings > General > Reset > Reset Network Settings.
    Note: this will delete any network related settings (saved Wi-Fi passwords, etc), it will not erase any content from your device.
    Thanks,
    Matt M.

  • Why does my trackpad stop working, the batteries are fine.

    Why does my trackpad stop working, the batteries are fine.

    Try expanding your question a little bit.... how is it not working? Just saying it "stopped working" isn't really saying much.
    Like does it work sometimes and it intermittendly stops? Is the light on the power button not on?
    Does it sometimes not click things? (always remember the actual trackpad buttons are actually on the buttom of the trackpad so you have to give a decent click on the pad to make it work)

  • I can't update my iPod Touch software. It fails at 777 mb of 778mb saying download has timed out. Computer settings and broadband connections are fine. Help please!

    I can't update my iPod Touch software. It fails at 777 mb of 778mb saying download has timed out. Computer settings and broadband connections are fine. Help please!

    Disable or turn off all firewall and anti-virus software and try the download again.
    Stedman

  • Screen showing USB cable...what's wrong?  Connections are fine.

    We were setting up our apple tv and everything was working well.  Then we did a system update and moved the apple tv and suddenly on screen the USB cable icon appeared on the screen and we can't go any further.  All connections are fine.  What next?

    Welcome to the Apple Community.
    Get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    Connect the micro USB cable to the Apple TV and to your computer.
    Open iTunes.
    Select your Apple TV in the Source list, and then click Restore.
    Do not disconnect your Apple TV's power cable during the restore process.

  • I cannot connect to itunes store but my network connections are fine and I have tried everything on the itunes support site. I just want to authorize my computer. Can anyone help?

    I cannot connect to itunes store but my network connections are fine and I have tried everything on the itunes support site. I just want to authorize my computer. Can anyone help?

    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • Instructions for extending a wireless network through a wired connection

    These are the instructions for extending a wireless network by wiring two airports together.
    The benefit of this is to provide a strong signal in more locations in your home or business.
    The advantage of this technique over WDS is that the wired connection is faster and more reliable.
    These instructions assume you have a) an existing wireless network setup using an airport , b) a new airport that you want to add to your network, c) you can run a cat 5 cable between the two airports, and d) you are familiar with the airport utility.
    If while using these instructions you are prompted to update your airport firmware please do so.
    1) Gather the following information from your existing Airport on the Summary tab of Airport utility:
    a) Wireless Network Name
    b) Wireless Security
    c) You will also need the password, which hopefully you just know.
    2) Plug in your new Airport, connect it to the existing Airport using a cat 5 cable.
    3) Reset the new Airport using the tip of a paper clip. On my Airport Express that is next to the audio out.
    4) After a short wait the new Airport should appear in Airport Utility with a generic name.
    5) Click the new airport and click "Manual Setup". You may have to cancel out of some popups to get to the Manual Setup button.
    6) On the "Base Station" tab set a "Name" that does NOT equal the the name of your old Aiport. Also set the password. This us the password that one uses to make changes to the setup of the Airport.
    7) On the "Wireless" table set a "Wireless Network Name", "Wireless Security", and "Password" to exactly match that of your old Airport. This is the password that one uses to gain access to the network.
    8) On the "Internet->Internet Connection" tab set connection sharing to "Off (Bridge Mode)".
    9) Click "Update" at bottom right of Airport Utility.
    10) Test by using "Advanced->Logging and Stats->Wireless Clients" to see which clients are connecting to which Airport.

    viafax999 wrote:
    coolhwhip wrote:
    Thanks for the reply.  Like I said, I am pretty new to this.  So I need to buy something like this to put in my media center then?
    http://www.amazon.com/Hawking-HWREN1-Hi-Gain-Wireless-300N-Extender/dp/B001DMEYCY/ref=sr_1_1?s=pc&ie...
    Do I even need the Wireless N router at all, or will the Westell do the trick?  I'd be looking to stream HD from my main home PC, so I need good wireless speed.
    I assume that there is a tv in your media center so what would make much more sense would be to get a coax splitter and split the coax at that tv and then move the vz westell router to the other side of the splitter.  It really makes no matter where the westell router is on the coax setup and doing this should allow you to connect your devices directly to the router.
    So the coax feed from the ONT comes in through the garage into the office and is connected to the Westell in the office (which is hard-wired into my office PC).   If I move the Westell to the entertainment center I'll be in the same boat w/ my office PC then, i.e. needing a wireless connection to the Westell to get internet access.  Am I missing something here?

  • Is my new Win 7 pc still using a wireless signal dispite now being connected via a USB?

    I have a very fundamental question that has me perplexed regarding my MX870 multi printer, scanner, fax device.
    I used it with my Win XP pc via a USB connection and it functioned flawlessly. I later purchased a Win 7 laptop and made a wireless hookup from a Netgear router to the laptop. That worked well also.
    I  recently purchased and installed a Win 7 Pro desktop to replace the Win XP pc and to my surprise it made an automatic wireless connection to the MX870 printer - not sure how or why this happened but all features seemed to somehow work without any input on my part?
    Yesterday I disconnected old Win XP pc from the printer and located the new Win 7 desktop in its place. Since the driver and the software for the new Win 7 pc was obviously using the driver and software initially installed for the Win XP machine, I downloaded and installed the latest driver and software for the new Win 7 64 bit pc, and made a USB connection from Win 7 pc to the printer following the installation directions,
    My questions are these:
    1. How do I determine if I am indeed using the USB pc to printer connection and not somehow still using the wireless hook up? Can someone advised me on a way to make this detemination?
    2. Could there be an issue if the printer is getting conflicting signals from the wireless and the USB? I wonder if that is still a possibility since the Win 7 laptop mentioned earlier is located in another room and continues to use the printer wirelessly.
    I can no longer print color photographs using the new Win 7 USB connected pc to printer and suspect that the printer may be getting confusing signal inputs? If this is a possiblility is there a way to prevent wireless signals to the new Win 7 pc?
    I am a novice with all of this and would very much appreciate any input and assistace.
    Frank

    To be brief, if I let my A/P Extreme set the channel automatically, it goes to 11. Then I get severe dropouts. This is in 802.11b/g compatibility mode. When I set the channel manually to channel 1, all is well, strong signals everywhere. I can't figure out why, but it works. So my suggestion is, *try some different channels* manually!!

  • I have wireless signal, but no internet Connection

    I have a wireless router, and an iBook G4, and so does my husband. I get wireless signal and internet, however my husband's ibook only get wireless signal and not internet. He has always had problems with the internet signal on his wireless. Please help!!
    Thanks

    I would start by reseating the Airport card. Here is directions on how to access the Airport card. The airport card has to be seated correctly to get a good signal and reliable connection. Make sure the connection is pushed in completely.
    Here is another link to install the Airport card. Look at how far they have the connector and compare it to yours. That might help.

  • Experiencing very slow response time using AirPort while wired response is fine. Suggestions?

    After a surfing session a few weeks ago the response time for my AirPort internet connection became painfully slow.  When I plug in to the wired connection it works fine.  Resetting the router and modem doesn't seem to fix it.  What might have happened and what can I do to fix it?

    It is very possible that you may have some form of Wi-Fi interference that appears during these hours that is preventing your AirPort Base Station from providing a clean RF signal.
    I suggest you perform a simple site survey, using utilities like iStumbler, Wi-Fi Explorer or AirRadar to determine potential areas of interference, and then, try to either eliminate or significantly reduce them where possible.

  • Airport Utility on iphone ipad ios8 often shows internet disconnected while macbook connects just fine

    Hi, I need help with this problem that just arose after updating my devices (iphone 5 and ipad air) to ios8.
    Every now and then the internet disconnects, and in Airport Utility the Internet is shown disconnected (orange bar), while it is perfectly fine both on the motorola modem and AirPort TC.
    My MacBoook and Android devices can connect smoothly to the internet and the only devices affected by this problem are my iPhone and iPad. All the iOS and firmware are most recent ones.
    Thanks in advance,
    Steven Antonius

    Ok, thanks for clarifying that for me. Currently, I am unaware of any issues with OS X 10.8.x and the earlier 802.11b/g AirPorts or with them conflicting with earlier OS X Macs.
    If you temporarily power-off the iMac can the MacBook connect now? If so, try setting the Radio Mode on the Express to: "802.11g only." By default, it is set at: "802.11b/g compatible." Verify that the MacBook can still connect. Once verified, power-down the MacBook. Now power-up the iMac. Verify that it can connect. Leave it powered on. Finally power-up the MacBook. Can it connect now?

  • TS1717 "Problem downloading unkown error -50 Check connection" Connections are fine. Suggestions ?

    Downloading stopped in midstream with the above error message but internet connection is fine. Suggestions to resolve problem appreciated.

    Perhaps try the "Error -50," "-5000," "8003," "8008," or "-42023" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
    iTunes: Advanced iTunes Store troubleshooting

  • Output is redlining while track inputs are fine??

    I have four microphones hooked up to an Apogee Quartet and I am using Garageband to record.  All of the input levels are fine when I record (all within the green).  For some reason during playback, the mastertrack redlines and distorts the recording with loud passages.
    I am not over powering the microphones as the gain levels are set appropriately for each track.  All output levels on Garageband are set to 0db including the mastertrack.  Not sure why the mastertrack goes into the red during playback.  Please advise!!  Thank you!

    Your JOIN is not correct, many fields are missing, so there multiplication of pseudo-records may arise
    SELECT *
    FROM imrg
    INNER JOIN mkpf ON mkpf~bldat = imrg~idate  " You can select each and every
                                                 " movement of the whole day ?
    INNER JOIN mseg ON mseg~mblnr = mkpf~mblnr
                        mseg~mjahr = mkpf~mjahr  " add the whole key
    INNER JOIN equi ON equi~erdat = imrg~erdat. " You can select each and every
                                                 " Equipment created this day ?
    Try to analyze the standard tcode via [SE30|http://www.sdn.sap.com/irj/scn/advancedsearch?query=se30] or [ST05|http://www.sdn.sap.com/irj/scn/advancedsearch?query=st05].
    Regards,
    Raymond

  • Aris TG1682 wireless slow and ethernet wired connection

    Have been having a problem with Wireless speeds. The Comcast tech has replaced my single band gateway with a dual band Tg1682g. Did not improve wireless speeds. Have Blast up to 150m. Speed test is about 30-50.When i attach with a wire, I can see the ethernet adapter dropping and reconnecting on the network adapter page. Have two PCs. One at Windows 10 and one at 8.1. Speed test will run wired and shows 30-40. Saw on the forum that this a new gateway so wondering if it has the correct firmware and settings ? also tried using bridge mode to eliminte wireless completely and still see adapter dropping. tech coming back next week to prove my computers are the problem.

    You may want to call Comcast and have them check to see if your gateway has the appropriate firmware for your speed tier.

Maybe you are looking for