Two work stations with one desktop?

I think I have most of the hardware I need to solve my problem...
I want to use my G5 in two work areas about 8 feet from each other.
Main work area has G5 and with a 23" monitor (Sony PremierPro SDM P234 - 1920x1200).
wired apple keyboard with USB ports and a wireless mouse.
I already own a second Dell Monitor.
How would I put this all together? What else would I need? in the way of hubs, adapters, etc?
the specs from the graphics on the G5--
Graphics/Displays:
GeForce FX 5200:
Chipset Model: GeForce FX 5200
Type: Display
Bus: AGP
Slot: SLOT-1
VRAM (Total): 64 MB
Vendor: nVIDIA (0x10de)
Device ID: 0x0321
Revision ID: 0x00a2
ROM Revision: 2060
Displays:
SDM-P234:
Resolution: 1920 x 1200
Depth: 32-bit Color
Core Image: Supported
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Display:
Status: No display connected

Hi! Set up your monitors and turn on the display mirroring (display prefs) which means both screens will be identical. Hook two usb mice and keyboards up and you're good to go. Either monitor will have complete control! (Moving both mice at the same time in opposite directions will cancel out mouse movement and the curser will stay stationery!) Tom

Similar Messages

I have a small production client looking to run 1 workstation running Mac Lion 10.7.3 and two work stations running Windows7 64 bit. They will all be talking to the same storage array through 8Gb FC. What is there most cost effective way to do this?

I have a small production client looking to run 1 workstation running Mac Lion 10.7.3 and two work stations running Windows7 64 bit. They will all be talking to the same storage array through 8Gb FC. What is there most cost effective way to do this?

Thank you for your help.
The client has already made the jump to 8Gb including HBA's, switch and RAID Storage.
The other question will be if they need a seperate Mac Server to run the Meta Data or are they able to use the current Mac they are running to do this?
The Mac is a 201073 model they say with 12 Dual Core 2.66Mhz processors and 16 GB of Memory. This system is currently doing rendering. It has the XSAN Client but I understand for the solution to work they need to also run XSAN Server on a MDC.

Can i use two apple tvs with one itunes account?

can i use two apple tvs with one itunes account?

yes and you can use more then 2
just don't give them the same name

PO No range when we ink two SRM system with One ECC system

Hello Experts,
We have a client requirement to link Two SRM Systems with One ECC system.
In this case what number range we need to maintain in both SRM systems for PO.
-The number range of ECC PO should get update whenver the PO is transferred from any of the two SRM system.
-We have Extended classic scenario.
-Also PO Doc type is going to be same.
Can we handle this by increasing the buffer of the number range in one of the SRM system?
Any idea...pls help urgently.
Best Regards,
Anil
Edited by: anil.s.verma on Oct 1, 2010 4:33 PM

Hello Anil,
Being in Extended Classic Scenario (leading PO being in SRM, R/3 PO number range is concidered as external because PO number is given by SRM), the only solution for you is to:
1- give same number range interval for PO (internal in SRM system 1 and SRM system 2, external number range in R/3), e.g. 3100000000 - 3199999999
2- in SRM system 2, fill in current number with (for example) 3159999999 and let empty (or current value) in SRM system 1
3- assign, in each system for your concerned transaction type, number range as internal in SRM and external in R/3.
In this way, you will avoid overlaping in R/3 between PO numbers coming from SRM system 1 and SRM system 2
Regards.
Laurent.

Two iPhone's with one iTunes account?

Hi,
Can someone tell me what will happen with my iTunes account assign to iPhone if I will give that iPhone away and buy new one. To be precise I am planning to buy new iPhone in June/July through O2 here in UK and give old one to my wife who is got Pay as You go SIM card from O2 as well, which work fine with my iPhone now (even data transfer but that cost £3/Mb at this moment!). I just wonder what will happen to all my Apps in my iTunes account when I will try sync these two iPhones then? I guess it’s not possible to share the same account between two iPhones. What are my options here?
Thanks in advance.

There is nothing that prevents you from sharing or using the same iTunes account with more than one iPhone. If your wife has her own iTunes account, when syncing this iPhone with iTunes when she is logged in to her account will transfer her iTunes account to the iPhone for access with the iTunes store and app store on the iPhone.

Macbook pro for work station with external monitor?

I shoot weddings and need to run cs2 plus other programs and storage for photos.
I read in Macworld where they recc. the Macbook pro instead of a power mac as a work station using a 24" dell. They said the power mac is overkill.
Do you think I would be happy using it in this way?
I would save a bundle in buying another computer.
I do have an older PC now tower that I use..
I also would have to run windows since there are programs that i run on xp that they don't make for the mac.
Maybe I should just stay with a PC for the workstation?

if you meant compared to a powermac (ie, a G5), then the macbook pro is actually on par or faster than those machines. but if you meant the current mac desktop, the mac pro, then indeed that is a significantly more powerful machine.
be warned though.. adobe cs2 is currently not native for any intel mac, MBP or otherwise. so it's going to run much slower than what you'd expect, and much slower than what the machine is really capable of, due to emulation. this will be resolved with cs3, which should be out before the end of the month.
as for your windows apps that don't exist for the mac. before you jump in with the intention of definitely running windows on the MBP, you should take a look around and see if there are any mac programs that can do what you need to do with those apps, even if they aren't exactly the same. this may not be an option for you, but if it is, it's a nicer way to work than to be forced to use up all the extra disk space and system resources and effort, to have a windows install running as well. that said, if you can use these apps through parallels, it can be a pretty seamless way of accessing those apps when you need to.. but you'll chew into your drive space still.
but in principle, what you want to do is definitely achievable. you won't get the most bleedingly fast system that a mac pro desktop would give you.. but as I said, the current MBPs are right up there with the power of the G5 macs, in many cases faster, so it's definitely desktop class performance even if not in the same league as the mac pro. photoshop will annoy you if you try to run the non native version though.. so make sure you get the intel version (ie cs3) as soon as it comes out. all in all, together with a nice large 2nd monitor (and prob a good external drive too) it'll make for a great working setup.
I'd also get a wireless keyboard and mouse, and a stand to put the MBP on, so it sits at monitor height and you can just work as if it were a desktop machine. that's what I do, and it's great.

Export two TXT files with one button

Hi,
I'm using Application Express 2.0, i'm developing aplication in which users import few different excel spreadsheets and after that they export date in specified TXT format.
I'w like to create functionality to export two and more files in CSV (TXT) format with one button and one click only in defined folder. It's necessary to simplify work of my endusers becose they have to generate ten or more files.
Is it possible create functionality which generate files in defined folder without any addtional user's action?
Best,
Kiril

Create a procedure to output the files, use the oracle directory object to define your output path.
create or replace directory wayne as '/csv';
use google or metalink to get examples. This way you can output as many files as you want, my personal opinion would be to create a dynamic report your users could run on demand.

How can I Connecticut two Airport Express with One Time Capsula?

Only by Wifi or by LAN in a row?

What are you trying to accomplish with the AirPort Express devices?
Where will the Express devices be located in relation to the Time Capsule?
If you are planning to use the Express devices to "extend" the wireless range of your network, Ethernet LAN will always provide far better performance than trying to connect the Express devices using wireless only.
You have the option of connecting both AirPort Express devices directly back to two LAN <-> ports on the Time Capsule....or....connecting one Express back to the Time Capsule and then connecting the second Express to the first Express using Ethernet. This assumes that you have a "new" Express with both WAN and LAN ports.
If you choose wireless only, both Express devices will connect back directly to the Time Capsule, so both of them should be located where they can receive a strong signal from the Time Capsule wireless.
A "hybrid" approach can also work. Connect one Express to the Time Capsule using an Ethernet cable and then setup the second Express to connect to the first Express using wireless only.

TimeCapsule works fast with one macbook, but slow with a macbook pro

Hey there,
i have a new time capsule 2gb, set up as a sole wireless router in my network. My macbook pro works fine with it but it needs about 3 hours for copying 40 gigabyte of data to the time capsule. Yesterday a friend came over with her macbook and was able to copy the same amount in about 50 minutes. I can't figure out any difference in the two systems. Can you help?
Thanks.
Tilmann

tilmannkuhla wrote:
i have a new time capsule 2gb, set up as a sole wireless router in my network. My macbook pro works fine with it but it needs about 3 hours for copying 40 gigabyte of data to the time capsule. Yesterday a friend came over with her macbook and was able to copy the same amount in about 50 minutes. I can't figure out any difference in the two systems.
Welcome to Apple's discussion groups.
You might try measuring the signal and noise levels that each Mac sees using these instructions:
http://discussions.apple.com/thread.jspa?threadID=2347845&start=1
One possible explanation might be that your Mac has a metal case while the other may have a plastic case.

Recently bought new printer. All works fine with one OSX user. However, cannot print anything on other OSX user, including cannot print Adobe PDFs or to new printer. Puzzling!

computer = Mac PowerPC G5
OS = 10.4.11
Adobe Acrobat 7
HP laserjet M1212nf
I recently bought a new HP printer. I was on an admin user when I installed it. All works fine with this admin account/user. I can print to the HP, print to Adobe PDFs.
However, when I then go over to another user account, I cannot print *anything*. I cannot print to Adobe PDF, cannot print to the new HP. If I try to print an excel file, it says "cannot communicate with the printer" along with some useless suggestions. If I try to print a page on FireFox, nothing happens. That is, sure I get the usual dialog box, click the appropriate choice of printer, click the number of copies, then click the OK button ... and nothing happens. No pdf process is started. Nothing is sent to the HP printer.
The fact that both printer options are not working suggests it is some kind of OS problem, not specific to either printer "device".
Any assistance is appreciated! Thanks!

Hi BDAqua,
Thanks for the suggestion. I'm a bit leery of trying that. I would think that if the driver was not installed, then none of my users could use the printer. However, both admin users can use the new printer. The list of available printers is:
Adobe PDF 7.0
New HP Printer
I also used to have Old HP Printer, which I removed. Before, Users A, B and C could use both the Adobe PDF and the Old HP printers. Then, after I added the New HP Printer, it showed up in the list of printers for all three users. However, after I added the new printer, only the two admin accounts, users A and C, can actually print anything. Both users A and C can use the Adobe PDF printer AND the New HP Printer. But I get error messages with user B, for both the Adobe PDF printer and the New HP Printer.

How to use two seperate iPods with one iTunes. Different Music Preferences

My Wife and I both have 80 Gig iPods. We like different Music. How can we both use the same Windows XP computer and have different music lists?

See: How to use multiple iPods with one computer
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
Regards.

How do i synce two different ipods with one computer??

i recently purchased an ipod 5th generation for my other half which i have set up an account for and comes up when i plug in but the home page always comes up with my ipod stuff which is a 4th generation ipod. i have no problem with mine as it stores songs etc but when i plug the other one in it deletes whats on there and i have to manually tick all the songs again to sync back on to it. is this normal?? i am using a windows xp and have no issues with the computer and my ipod just the other one. i also have updated itunes to itunes 9 so the 5th generation ipod can download stuff. it seems to store songs and then when i go to download or update it takes them off and am back to square one!!!! please help!!

Is the following document of any help with that?
[How to use multiple iPods with one computer|http://support.apple.com/kb/HT1495]

How do I run two Apple IDs with one computer and sync music content?

I have a single PC which I have added all of the music to one my log in. My wife and I have Iphones and I want to run separate accounts for itunes, but sync music content from the single source to both phones. Whenever I have tried to do this in the past, it starts to sync all app to both phones. I tried to therefore have separate log ins on the pc itself, but when I have tried this, the music content does not update on my wifes itunes library, after I have added music to mine (ie imported a CD), even though I have linked my wife's music library for itunes purposes to my music folder (hopefully that makes sense!!). Can anyone help as this is driving me mad, otherwise I will just have to run from my account and delete all of my wifes apps etc whenever I sync my phone, and vice versa.
Thanks!!!
Jeremy

Is the following document of any help with that?
[How to use multiple iPods with one computer|http://support.apple.com/kb/HT1495]

How to sync two iphone agendas with one mac ?

Dear all,
This is my first question here, and I looked it up, but so far I didn't find a satisfactory answer
I own a MacBook Pro and iPhone, that I keep for private stuff.
Recently my employer provided me with a new iPhone for work. Both therefore have different Apple ID's
I would like to sync both calendars to my MacBooks calendar, and possibly private iPhone, so I don't have to keep my work iPhone with me all the time.
How to proceed ?
Thanks

Absolutely, connect each phone, select what content you want on each phone, then hit the sync button. iTunes will keep everything straight, by device, upon subsequent syncs, including separate backups.

How to control two different processes with one DAQ output board

Hi! I posted this in the Signal Generators forum, but I'm reposting here in case someone on this board has suggestions for a way to get around my problem programmatically (ie. within LabVIEW). Thank you for any help you can provide.
Patrick
I have a PXI-6722 8-channel, 13-bit analog output board, and with this I want to independently control both the temperature (thermometer excitation/heater control) and magnetic field in my experiment. Unfortunately, it appears that I cannot do both simultaneously, which is totally unacceptable for my application.
Currently I'm using separate VI's for field and temperature control. This is the start of the problem, because in DAQmx you can't have 2 output tasks on the same card at the same time. In order to remedy this situation, I used MAX to create a global task containing all 8 13-bit analog outputs. However, it now appears that each time I do a write operation on this task (from whichever VI) I must write to all of the task channels, rather than just the channels I want to change. This would be fine for the temperature controls as they are of the type "set an output voltage value and hold it until told differently," so I could re-write the currently held values for channels that are not being changed. Magnetic field control will not work in this way, because we need to do very smooth field sweeps which require an analog waveform to be sent and sampled at a high rate (so that the steps are as small as possible). So if, for example, a thermometer's excitation voltage or a heater's power need to be changed during a field sweep (as is often necessary to maintain a constant temperature, via PID), then the sweep will be disrupted, potentially causing a dangerous magnet quench.
Does anyone have any ideas on how I could make this work? It seems very wasteful to buy a second output board when I still have lots of free channels on the first.
Thanks,
Patrick

I'd probably create a third process that just updates all output values on the card whenever necessary.
One way is to send messages via queues from the temperature and magnetic field control routines to the third process. The third process doesn't do anything unless it gets a message from one of the two other processes. The message should contain the channel task ID to change along with the new value. Use the LabVIEW queue VI's, using a type definition to specify the message type either when you create the queue or use the variant VI's. Once it gets a message, it updates the changed channels, not modifying the others (use a shift register to store an array with the current set of output values).
Hope this helps.
Jason

Two work stations with one desktop?

Similar Messages

Maybe you are looking for