Two WRT150N Questions - Change User Name and X-conn a hub

Hi Folks,
I did a quick search but didn't find what I was looking for in the archives.
1) I previously had a WRT54GX400 - I believe I was able to change the admin username on that model. Can I do the same thing on the 150N?
2) I am planning to cross-link a small hub so I can get more wired connections on the 150. Is there a particular port that I need to plug that cable into so I can cascade the signal to the hub or will any of them do? Will I need a cross-connect cable?
Thanks!
-Armando

While running the CD for the first time to setup the router, You can change the username & password for the router.However you can Change the router's password only by login into the Linksys GUI.To access the GUI, You need to type 192.168.1.1 in the address bar...Keep the username blank and in password type "admin " in lower case.Under Administration tab..you can change the password.

Similar Messages

I need to change user name and password on my macbook pro

I need to change user name and password on my Macbook Pro OS version 10.6.8. As I purchased it used and can't remember what user name and password the original owner gave me. I need to install printer drivers and can't until I can sign in.

Reset the computer to the factory condition.
Giving away / Selling your Mac / Resetting the computer to the factory condition
http://support.apple.com/kb/HT5189
http://www.thesafemac.com/how-to-prepare-your-mac-for-sale/

I changed user names and apps won't update, please help?

Can anyone help me, I recently changed my username and email on my iphone, ipad and imac, but the iphone apps are not updating since is asking me for the old user name and password, which I don't remember. Thank you.

Purchased items are forever tied to the Apple ID that they were purchased with. If you don't remember the Password, log onto Manage your Apple ID, and click on Reset Password: Apple - My Apple ID
If you don't remember your Security Questions, contact Apple Support to have them reset:
ACCOUNT SECURITY CONTACT NUMBERS
Cheers,
GB

HT4889 Question - administrator user name and password

I have recently acquired an Imac to replace my elderly G4 and wish to transfer the G4 content to the Imac using Migration assistant. The authentication box has opened on the G4 asking for my administrator user name and password but in a senior moment I find I cannot remember where they are. Can anyone help me?

Hello, peterandmo.
Thank you for visiting Apple Support Communities.
Here are the steps that will walk you through changing an admin account password using another admin account.
Resetting a user's password using an administrator account
Important: Passwords for administrator accounts should not be blank.
Log in with an administrator account. Tip: If you don't know the password of any administrator accounts, see "Resetting the original administrator account password" below.
From the Apple menu choose System Preferences.
From the View menu choose Users & Groups.
Click the lock button if it appears locked; enter the administrator password.
Select the name of the user whose password you want to change.
Click the Reset Password button or the Change Password button.
Enter a new password in both the New Password and Verify fields, and add a Password Hint if desired.
Click the Reset Password button or the Change Password button.
OS X: Changing or resetting an account password
http://support.apple.com/kb/ht1274
Cheers,
Jason H.

Changed user name and now can't sign in -HELP!

I just wanted to change my user name, so I went to accounts and just changed that, not the password or anything else...I restarted my computer and now I can't sign in with the new OR the old...what can I do?

I followed these steps:
Resetting the original administrator account password
Follow these steps to reset a password when there is only one administrator account on the computer, or if the original administrator account (of several) needs a password reset. "Original" administrator account refers to the one that was created immediately after installing Mac OS X. If the original administrator password is known, the original administrator user may reset the passwords of other administrator accounts using the steps described above.
Start up from a Mac OS X Install CD (one whose version is closest the the version of Mac OS X installed). You should first disable Open Firmware password protection, if it is enabled. Hold the C key as the computer starts.
Choose Reset Password from the Installer menu (or Utilities menu in Mac OS X 10.4 Tiger). Tip: If you don't see this menu or menu choice, you're probably not started from the CD yet.
Select your Mac OS X hard disk volume.
Set the user name of your original administrator account.
Important: Do not select "System Administrator (root)". This is actually a reference to the root user. Do not confuse it with a normal administrator account.
Enter a new password.
Click Save.

Two naive questions: change report templates and customization.

I searched the forum but didn't have the luck to find the exact answer.
1) I've chosen the alternating row color template for one of my report, however I wanted to change it to another template, say standard. Is it possible, and where I may find the place to change?
2) Is there a tutorial of how to customize the row color depends upon the value dynamically? Like an OBE. An elaborated example will be great!
Thanks in advance.

Radhika,
Thanks for the info. Unfortunately, based on this statement from the one link:
"Several macros in Sun ONE Studio IDE cannot be edited (for example, DATE, TIME, NAME of class, PACKAGE, etc.)."
It would appear there is no way to alter the timestamp format.
The question still remains of is there a way to access the year for a copyright stamp? If anyone else has any input, it would be appreciated.
Thanks again Radhika for your assistance.
-Mark

Domain name and Mobile me host question regarding user name and password

I am waiting for my domain name from godaddy to forward to my mobile me website. When I typed in my website to see if it launched, I get a screen that says "the server www.marysmith.com at me.com requires a username and password. And then there is a prompt to enter my username and password.
Have I done something to prompt or lock my website? It is hard for me to tell, because I am still waiting for the domain name to connect to my mobile me website, but I have done this before and never got this screen. Additionally, I do enter my mobile me password and then I it connects me to the mobile me home page. Not sure if that is good or bad. Thanks for any help!

The URL - http://www.marysmith.com/ - is working for me. Empty your browser cache and try again.

WRT54G - Changed user name and password; now printer won't communicate with computer

Time Warner used remote access to get into my wrt54g system and create a new user id/password for security. As a result, my hp printer will no longer communicate with my computer. HP says to hook up a usb from router to printer, but there's no usb port on the wrt model I own. Don't know whether to buy a new router or if there is a solution to this problem. I hooked up a usb from computer to printer but it did nada...

so meaning to say you are unable to print even if the printer is connected to the computer. If that's the case even if your printer is connected wirelessly to the network then you will still not be able to print. Make sure that the printer will be able to print first when connected to your computer.

Cannot change user name and password for i cloud

I have changed my apple ID and password but cannot access I Cloud. My old apple ID shows up everytime and neither my old or new password will work. I cannot even delete the account and start over. Help!

I tried to delete the account but you have to sign in with the apple id and password in order to delete it and the phone does not recognize my password so it won't let me delete the account.

WEBDAV FILE SYSTEM, user name and password changed

Getting prompt as follows, WebDAV File System Authentication,
Enter your user name and password to access the server at the URL "http://idisk.mac.com/bobbiealiaswink/" in the realm "idisk.mac.com."
User name and password were changed recently by Mobile Me, now either or neither
are being recognized by prompt. Constant reminders every few minutes since upgrading Safari two day ago....I am going buggy with prompts...have tried every possible configuration. Is there a way to enter new access area to enter new username and password?

Hi Alias Bobbie, and a warm welcome to the forums!
If this doesn;t help...
http://discussions.apple.com/thread.jspa?threadID=2082353&tstart=0
Try this...
http://support.apple.com/kb/ts1544

Initially stating No authorization required using Adobe. When I try to change it so I can transfer downloaded books by my Nook e-reader it I get an error message stating the Adobe user name and password is associated with another computer. What gives?

When I set up Adobe reader on my computer to be able to download books from a library and then transfer to my Nook e-reader, I initially stating No authorization required using Adobe. When I try to change it so I can transfer downloaded books by my Nook e-reader it I get an error message stating the Adobe user name and password is associated with another computer. What gives?

This is pretty surprising and wierd that even Reader 10.1.1 is crashing on your system. It works pefectly for me.
Would it be possible for you to get the crash dump, and upload it, so that I can have a look at the same.
Download PROCDUMP from <http://technet.microsoft.com/en-us/sysinternals/dd996900.aspx> and extract it to a folder, say, c:\temp\procdump.exe
Open cmd prompt and type "cd c:\temp".
Launch the browser and open the PDF.
Open task manager, sort processed by name. Two AcroRd32.exe instances should have been launched. Note the PID (a small integer like 5588) corresponding to the AcroRd32.exe with the higher memory usage; this is the process that must be crashing. Note this PID.
On the cmd window, type "procdump -e -ma 5588 c:\temp\01.dmp" (replace 5588 with the actual PID of the process noted in Step 4). Procdump will now wait for the aoolication to crash. If it throws a EULA, accept it.
Perform your steps to cause the crash.
Procdump will have created a dump file at "c:\temp\01.dmp". Zip it up (since it will be 100s of MBs otherwise) and share with me.
Thanks in advance for all your help
Ankit

I can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name

can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name. My original external has an error and needs to be reformatted but I dont want to lose this informations its my entire Itunes library.

Sounds like the source drive is formatted as case sensitive and the destination drive is not. The preferred format for OS X is case insensitive unless there is a compelling reason to go case sensitive.
Why can't you change the filename? Is it because the source drive is having problems? If so is this happening with only one or two or a few files? If so the best thing would be to copy those over individually and then rename them on the destination drive.
If it is more then you can do manually and you can't change the name on the source you will have to reformat the destination as case sensitive.
Btw this group is for discussion of the Support Communities itself, you;d do better posting to Lion group. I'll see if a host will move it.

I changed the user name and screensaver does not let me enter

I changed the user name this morning, later the screensaver popped up. The screen shows the old user name and does not accept the password, so i cannot even open the main page.

Change it back, then:
How to change user short name or home directory name
http://support.apple.com/kb/HT1428?viewlocale=en_US
Also, this might be useful:
http://www.macworld.com/article/132693/2008/03/changeshortusername.html

My user name and pass word have not changed I can't get into my gmail

My user name and pass word have not changed I can't get into my gmail

Can you access the email on a computer using a web browser meaning are you sure it is not a problem on the gmail end?

Invalid User Name and Password after changing the sa Password

Hi All,
I've Installed SAP 9.0 PL 05 ,while installing I've given database details as
User Name : sa
Password : abcd
Installation got success and I could able to log in to listed companies.
But, after I've changed sa user Password in SQL Server
i.e
User Name : sa
Password : xyz
Now , companies are not listed , then I had reset the password in (SAP Business One Service Manager - > Configure Security - > SLD)
When I check after this companies are listing, But
If I try to login with my regular user it is saying
Invalid User Name and Password
for testing purpose I've reset the earlier password for sa and tried., then it is working fine.
does the sa password affecting anywhere?
how can I change my sa password and use normally?
any help or knowledge would be very helpful
Thanks & Regards
M G

Hi,
Please refer SAP note:
1882731 - Cannot Display Company List After Database User Password
Is Changed
Thanks & Regards,
Nagarajan

Two WRT150N Questions - Change User Name and X-conn a hub

Similar Messages

Maybe you are looking for