TX hotsync with Vista, Hot Sync 7.0 hangs when updating date book

Hotsync of my Palm TX, with hotsync 7.0, Windows Vista is failing. Hangs on date book, step 2 of 13. Have to kill task with task manager to recover.
Worked a few times after initial install.
Log says did not transfer all data items to desktop. Suggests increasing the limit??
Don't see a way to increase the limit on data items.
Any suggestions?
Post relates to: Palm TX

Go over to www.pimlicosoftware.com and get dbfixit, run it and see if it finds any corruption. If it does you can either manually fix them for free or purchase the program and have it fix it for you. Then try to sync again.
Post relates to: Centro (Sprint)

Similar Messages

Hot synch problem - Palm Z22 - stalls on Date book synch....

I have a palm Z22. I've had it for several years. Recently, I downloaded 6.2.
When I hotsync, everything comes up as it should but it freezes on the datebook synch.
Here's what gets done in a nano second:
Package installer
Install
Install Service Templates
Install to card
Hot Synch Exchange
Date Book - it aways stops here....13 green bars, 2 of 12 complete.
Does anyone know how to correct it?
Thanks,
sdm
Post relates to: Palm Z22
This question was solved.
View Solution.

When I hotsync, and the display pops up, I seem to have some double items....
My previous problem (fixed by dbfixit as suggested on this forum) was the hot sync was stalling on the second date book.
I see that when it's hotsyncing, it is checking off one at a time...
Should I delete the duplicates and how do I do that. (they are not listed as duplicates on my hand held that I can see.
All this is hard work for me, so appreciate this forum and all your help. sdm
Package Installer
Install
Install Service Templates
Install to Card
Date Book
Date Book
Address book
Address book
To do list
To do list
Memo Pad
Memo Pad
Addit

My wife and I both have the iphone and we use my macbook pro with iTunes to sync our ipods. When I do something on my iPhone it shows on hers. How do I set up her a seperate iTunes acct on my mac so she can operate independent of me?

My wife and I both have the iphone and we use my macbook pro with iTunes to sync our ipods. When I do something on my iPhone it shows on hers. How do I set up her a seperate iTunes acct on my mac so she can operate independent of me?

There's info here on setting up separate libraries and user accounts. You won't have to reload (or re-import) all the music, just copy it.
The reason I suggest separate accounts on the Mac is because if you have the two libraries under the same user account, iTunes will also open the last library that was open in that account, and you'll always have to be mindful of which library that is. If you open iTunes and find it's not your library, you'll have quit, relaunch holding the option key and select the other library.
No, you won't have to log in and out of the Mac. (If I'm understanding your question here.) Multiple accounts can be logged in at the same time. And with fast user switching, you can toggle between user accounts.
I'll admit that maintaining the two libraries gets a little tricky, because if you share all the same music, you'll have to add it to one and update the other. (That won't happen automatically.) But I think Home Sharing makes this much easier to do.
Hope that helps!

I have a iphone 5, purchased dec 2013. Had no problems with downloads and syncing until yesterday. I updated to the latest 7.1.1 and now my purchased ringtones have bern deleted from ....Try providing more room for peoples questions ...

I have a iphone 5, purchased dec 2013. Had no problems with downloads and syncing until yesterday. I updated to the latest 7.1.1 and now my purchased ringtones have bern deleted from my library and my phone, Where are they ????
I have gone to download again and told i can purchase them again
But there is no option to download all ready purchased items..
Can you provide an explanation and solution .

Are you using the same Apple id as used to originally purchase them
and are you using iTunes on a PC/Mac

Palm Centro - Vista - Hot Sync Problem

Hello: I have a Palm Centro (Verizon) and am having major issues hot synching to my new Windows Vista (32 bit) home PC. I continually get the following error message:
"Error: SgConflictNotifier.dll failed a confirmation query and cancelled the sync operation."
"HotSync Error: An application canceled synchronization or failed to respond to a HotSync notification. Please ensure that you are not currently editing data using applications such as Palm OS Desktop or Install Tool (8009)."
I am running Hot Sync Manager 7.0.2 and Palm desktop by ACCESS 6.2.2.
When I tried the Hot Sync operation on my old XP computer, no issues whatsoever. Can anyone help?
Thanks
Seca2man
Post relates to: Centro (Verizon)

I am having the same issue as are several people on this board. I have attempted to reinstall the application and reset my Treo but still nothing. I would be interested if there is a fix I am missing.

T3 Bluetooth Hotsync with Vista

Oh somebody please help me!!
I have a T3 and I'm running Vista. After searching through the messages and trying different upgrades/downloads...I finally succeeded in upgrading to Palm Desktop 6.2 and configuring the T3 to HotSync via bluetooth. Yay...it was finally syncing!!
BUT as it was syncing, it got to Calendar/DateBook and locked up. It said that it completed "4 out of 16" and hung there. I had to go into Task Manager on the computer to officially stop the HotSync progress and get it off the screen. I checked and the Calendar version on the Palm is v1, the Datebook is v4.5.1.1P and the OS is v5.
What can I do??
Thanks,
Laurie
Post relates to: Tungsten T3

I just synched a Tungsten T3 with 64-bit Windows 7 using an Iogear USB Bluetooth adapter. Got the drivers from Iogear.com. Lots of steps to put it all together, but it worked! If it works in Windows 7, it will work in Vista.
-jackie

HotSync with Vista and Palm TX

I have new Dell Inspiron; successfully installed Palm TX software and performed first HotSync. One month later I'm receiving error message after attempting the HotSynch "The connection between your device and the desktop could not be established. Please check your setup and try again." I have checked set and downloaded "Palm Desktop 6.2 for Windows" and still can't perform HotSync. I've tried all four USB ports on laptop; done soft reset; restarted laptop, all to no avail. HELP!!! I'm just about ready to go back to paper planner!!!
Post relates to: Palm TX
This question was solved.
View Solution.

When you connect your device to your computer do not perform a hotsync. Instead open your device manager, you should be able to locate that in your Control Panel.
Once inside your device manager locate your Palm device. It should be located under Universal Serial Bus Controllers or Network Adaptors. Once you find it right click it and go to "Uninstall." As soon as you click uninstall unplug the device from the computer.
Plug it back in and it should come up with Found new hardware and hopefully you will be able to sync fine after that.
Let me know if that works out for you.
-Pat
Post relates to: Treo 800w (Sprint)

Cannot even START HotSync with Vista

Hello, I hope somebody can help me here...
I've bought a Palm Pre Plus a few days ago and since tried to synchronise it with my laptop.
I installed the newest Palm Desktop software and connected the phone via USB.
After installing everything I get a window asking me to connect the phone and press a "HotSync button" of some sort... but there is no press-able button on either the phone or the cable that works.
When I connect the phone it asks whether I want to just charge the phone or use the USB connection. If I choose the latter I can drag-n-drop stuff onto the phone (wallpapers & ringtones) but that's it.
Does anybody know what I should do? I have no idea what I did wrong or forgot to do...
Thank you very much!!
Post relates to: Pre Plus p100ueu (02)

With the Palm Pre, it does not "hotsync" like the previous Palm devices did. There is no native desktop sync. option.
With the PRE, you sync your data to an on-line service like the Palm profile, Google, Yahoo, Facebook, etc. With the Palm Profile, you only have access to the data on the device. There is no option to view the profile data on a PC.
There is a tool that Palm offers that will transfer your current data that is in Outlook or Palm desktop to the PRE and an on-line service. The tool is the Data Transfer Assistant. Go to Palm.com/dta to get the tool.
If you want to sync to Palm desktop or Outlook on your PC, you will need to use a 3rd party solution like Companion Link or the Chapura products Pocket Mirror for Outlook or Echo for Palm Desktop.

BB Curve 8330 with Vista - Calendar sync problems

For some reason, not all of my calendar items will move from my device to my computer when syncing. The "non-synced" items show as green on my device calendar, as opposed to blue for the ones that have been transferred to my Outlook calendar. Has anyone run into this problem? I don't get an error message when I sync.
Message Edited by LeslieSMiller on 02-04-2009 06:47 PM

To be able to get a good handle on how to proceed, we need some additonal information and each of your individual info may not be the same. Don't want to confuse who is being advised to do what to resolve problems.
OS version running on the BB
DM version running on pc
OS version running on pc
Any error messages received and what you did in response; as well as any changes to pc or BB before your problem began
What is listed as CICAL and CMIME in options-advanced options-default services
How many calendars do you have listed in calendar-menu-options-calendar
Let us know.
IrwinII
Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

Re: Fix for HotSyncs with Vista with probably most Palm devices, espically 650

I have a Palm tungsten E2 and I am getting the following message VFSDBCACHE.C,LINE4051, unattached record error. This happened two days ago. As of today I cannot get even get my Palm pad to open. It acts as though the battery is completely dead. In using the UBS cable will not allowed to open either. I'm really at a loss with this one. Does anyone have any great ideas. I thank you in advance for any help you may be,
jhook12

Jhook12 wrote:
I have a Palm tungsten E2 and I am getting the following message VFSDBCACHE.C,LINE4051, unattached record error. This happened two days ago. As of today I cannot get even get my Palm pad to open. It acts as though the battery is completely dead. In using the UBS cable will not allowed to open either. I'm really at a loss with this one. Does anyone have any great ideas. I thank you in advance for any help you may be,
jhook12
Have you tried pressing the tiny "Reset" button on the back of the device?
This will do a simple reboot.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Can anyone help me with iPod/iTunes syncing problems after recent software update?

Hi there,
I wonder if anyone can help me. Last week I updated my iPod to the latest software (8.2). Today I deleted some albums from iTunes and added a few others. I also made some changes to a few of my playlists. I then synched iTunes and my iPod. However the synching has not worked.
When I connect my iPod, it shows up in iTunes pretty instantly. When I click on sync, I can see in iTunes that it is syncing and also on my iPod, but the changes do not appear on my iPod afterwards. Also, after the first syncing attempt, I lost two-thirds of my album cover art. So, I lost covert art, but no other changes were made. The albums I deleted from iTunes are still on my iPod and the ones I added to iTunes are not on my iPod.
I have looked at the music on my iPod while connected to iTunes. I can see the songs/albums I have added are there, but they appear in grey and have a doted circle (to the left) next to them. This shows that they have not synched (I guess).
I have already restarted my McBook Pro and iPod a few times. I synched my iPod with iTunes after every restart, but it has not made any difference. I also deleted the music I added to iTunes and added it again. I synched iTunes and my iPod after this, but it has made no difference.
I would appreciate any suggestions.
Many thanks
Summary:
Updated iPod to iOS 8.2.
Made changes in iTunes i.e. delete and added music
iTunes and iPod show they are synching, but changes to not appear on iPod.
Also lost cover art on iPod after synching.
Products:
iPod Touch, latest generation
iTunes 12.1.0.50
MackBok Pro OS X Mavericks (10.9)

Thank you for your reply. I followed your suggestion and restored my iPod to its factory settings. I then restored it from a backup file. All the problems have been resolved. Quite incredible that I had to go through that process to fix it. I hope Apple will find a solution to the iTunes problem soon.

Why does my iphone 3gs keep turning off when i sync it with itunes like it tells me to when updating to IOS6?

please help

Hi Luke.Wilkins6,
It sounds like you are pressing the top Sleep/Wake button and the phone seems to shutdown rather than go to sleep, and occasionally youll see a purple screen rather than the Apple logo when you start it. I would start by resetting the phone, with these steps:
Restart or reset your iPhone, iPad, or iPod touch
To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
If the issue persists I would use the following article to backup your device to iTunes and restore it from your backup. If the issue persists, then restore it one more time as new using the same article to isolate to the backup file itself.
How to erase your iOS device and then set it up as a new device or restore it from backups
Thank you for using Apple Support Communities.
Regards,
Sterling

SSRS 2008: how to show an empty chart with legend and x and y axis when no data available

Hi,
I am using SSRS 2008, I generated one chart in report designer with the data from Analysis Services (Cube).
According to the dataset, there is no data returned when I run the query. so when I preview the chart, there is nothing but "no data available" showing on the chart.
Here I want to know is there any possible to show an empty chart with legend and x and y axis?
If it is possible, can you tell me how can I make it?
Best Regards.
Connie Zhu

Hi,
When there is no data, the chart displays the message "no data available". But using a little work around, you can display an empty chart.
Please find the below steps given to achieve this
1. Create a new dataset using TSQL to return 1 row of data having the category field and value field set to 0. Add the fields that are necessary for the category fields, series fields and datafields.
   A simple example would be like
   SELECT 'abc' as Category, 0 as Amount
2. Add a new chart, set the category field to 'Category' and set the data field to Amount from above dataset created in step 1.
3. In the new chart, right click the category axis and select axis properties, Click on the labels tab, check on
'Hide axis labels' and then click ok
4. Now set the Visibility property of both the charts depending on the rows returned from your main dataset
   a. click on your main chart and set its Hidden property to :
=iif(CountRows("MainDataSet"),false,true)
   b. click on the new blank chart added and set its Hidden proprety to (the opposite) :
=iif(CountRows("MainDataSet"),true,false)
   Note : Please change the dataset name in above expression "MainDataset" to the name of your chart's dataset
5. Resize the new chart to the same size as your main chart, then position the new chart on the place as the main chart.
   (Note : You can set the position of new chart to be same by copying the location property from the main chart)
6. Now run and observe the result. When there are no rows returned by your main dataset, the new chart (the blank chart) should be displayed.
I've added a working sample of this kind of a report
here.
Hope this helps. Please feel free to discuss if you have any questions.
Please click "Mark as Answer" if this resolves your problem or "Vote as Helpful" if you find it helpful.
BH

SQL 2012 database behaves differently with a unique index and ignore_dup_key = on when inserting data. It works on SQL 2008 db

If you have a table with a unique index and ignore_dup_key = on and you INSERT rows into that table with an ORDER BY clause (because you want to control which of the duplicate
key rows gets inserted), the wrong row gets inserted in SQL2012. It works correctly in SQL 2008.
We have recently migrated a database from SQL 2008 to SQL 2012. We do have few other dbs which are in compatability mode 100. The above operation works fine
in SQL 2008 dbs but not SQL 2012.
I've even tried applying the latest patch for SQL 2012 SP2 with CU2. Still the problem exists. I'm going to call MS support, but want to know if anyone has come across this problem ?

The MS documentation doesn't guarantee that the first row of the duplicates will always be inserted and the next duplicate row(s) get(s) ignored. Where did you find it in the MS documentation? I think you were just lucky that it was always inserting the
first row in SQL 2008 (and ignoring the rest of the duplicates) - I don't think this is guaranteed
Satish Kartan http://www.sqlfood.com/

Vista 64 bit OS - Installer error when updating to iTunes 10.5

I've tried updating iTunes via "Download Only", but when I try to run the installer (tried by clicking on Setup Admin and even the Mobile App Manager) ... the installer get's to where it appears it is about to successfully complete and then rollsback all changes and states an error is keeping it from installing and that no changes were applied. Can anyone help me troubleshoot what is causing this?

Here's what I did...found it on another thread about this topic. Go to Start, All Programs, Apple Software Update. Let it update itself first. Then ONLY update to Quicktime 7.7. Then rerun the iTunes installation program. That worked for me, and I was getting the exact same message as above. I don't know if it was the Apple Software Update program or the update to Quicktime, but something fixed whatever was wrong.

TX hotsync with Vista, Hot Sync 7.0 hangs when updating date book

Similar Messages

Maybe you are looking for