Tx ML81n missing buttons and greyed out fields

Hi,
Can anyone suggest why i miss in tx ML81n buttons (insert line, delete service line, service selection) and are fields as Service number, short text, quanty, unit of measure, gross price greyed out in my DEV although in the QAS and PROD it all works properly?
Normally it cant be an authorisation issue since i have sap_all.
thanks.
Peter

Hi,
Thanks for your replies. But yes it is in change mode and it is exactly there (Other Purchase Order and the create entry sheet) where i have this problem. So it is when i am in change mode and have created a new entry sheet.
So when being in tab: basic data, fields as external number location etc are fill in fields, below that there are the lines, there the fill in fields are greyed out.
Please suggest.
regards,
Peter

Similar Messages

  • Constant power button and greyed out screen (needed restart)

    So I'll use my computer in the normal way that I would (ichat, MSWord,iTunes and maybe some other programs) and every now and again (more often than that actually) the computer screen would go dark and I would get a notification that I need to restart my computer in the way of holding down the power button.
    I've run though disk utilities and fixed whatever problems it could. I've also run the Maintanence automation from the download site.
    This is usually what will happen:
    I'll use my computer normally
    a program will quit unexpectadly
    a) annother program will quit in the same way and then the computer will crash
    b) the computer will crash
    I've had this computer for a year and this only started happening a month or so after a full reinstalation of MaxOSX (annual cleanup)
    What should I do?

    After doing more reading into my issue I figured what was going on was my Kernel was Panicking (can I use the terms like that or is it just Kernel Panic... anyway)
    so I went ahead and found the logs on it and as you can see, it's happened a few times SO... without further stalling:
    Thu Jun 15 23:00:31 2006
    Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000080610050 PC=0x000000000003FCFC
    Latest crash info for cpu 0:
    Exception state (sv=0x44E00000)
    PC=0x0003FCFC; MSR=0x00009030; DAR=0x80610050; DSISR=0x40000000; LR=0x0003FCE4; R1=0x21F1BCF0; XCP=0x0000000C (0x300 - Data access)
    Backtrace:
    0x0282F4D0 0x001401B0 0x0016350C 0x0028F804 0x00295358 0x002AABD4
    0x000ABEB0 0x2F2F2F2F
    Proceeding back via exception chain:
    Exception state (sv=0x44E00000)
    previously dumped as "Latest" state. skipping...
    Exception state (sv=0x383DEA00)
    PC=0x9001B1EC; MSR=0x0200F030; DAR=0x00880000; DSISR=0x40000000; LR=0x913E6748; R1=0xF01803F0; XCP=0x00000030 (0xC00 - System call)
    Kernel version:
    Darwin Kernel Version 8.6.0: Tue Mar 7 16:58:48 PST 2006; root:xnu-792.6.70.obj~1/RELEASE_PPC
    panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
    Latest stack backtrace for cpu 0:
    Backtrace:
    0x00095718 0x00095C30 0x0002683C 0x000A8384 0x000ABD00
    Proceeding back via exception chain:
    Exception state (sv=0x44E00000)
    PC=0x0003FCFC; MSR=0x00009030; DAR=0x80610050; DSISR=0x40000000; LR=0x0003FCE4; R1=0x21F1BCF0; XCP=0x0000000C (0x300 - Data access)
    Backtrace:
    0x0282F4D0 0x001401B0 0x0016350C 0x0028F804 0x00295358 0x002AABD4
    0x000ABEB0 0x2F2F2F2F
    Exception state (sv=0x383DEA00)
    PC=0x9001B1EC; MSR=0x0200F030; DAR=0x00880000; DSISR=0x40000000; LR=0x913E6748; R1=0xF01803F0; XCP=0x00000030 (0xC00 - System call)
    Kernel version:
    Darwin Kernel Version 8.6.0: Tue Mar 7 16:58:48 PST 2006; root:xnu-792.6.70.obj~1/RELEASE_PPC
    Tue Jun 20 17:52:10 2006
    Unresolved kernel trap(cpu 0): 0x400 - Inst access DAR=0x000000000000D8EC PC=0x0000000000000000
    Latest crash info for cpu 0:
    Exception state (sv=0x3818E280)
    PC=0x00000000; MSR=0x40009030; DAR=0x0000D8EC; DSISR=0x40000000; LR=0x0025EF70; R1=0x22073D00; XCP=0x00000010 (0x400 - Inst access)
    Backtrace:
    0x00000000 0x0025F174 0x0025D26C 0x0025CFCC 0x002AABD4 0x000ABEB0
    0x73747269
    backtrace terminated - frame not mapped or invalid: 0xF00FF840
    Proceeding back via exception chain:
    Exception state (sv=0x3818E280)
    previously dumped as "Latest" state. skipping...
    Exception state (sv=0x37DFF000)
    PC=0x9001494C; MSR=0x0000D030; DAR=0xA130C1EB; DSISR=0x40000000; LR=0x907DCC74; R1=0xF00FF840; XCP=0x00000030 (0xC00 - System call)
    Kernel version:
    Darwin Kernel Version 8.6.0: Tue Mar 7 16:58:48 PST 2006; root:xnu-792.6.70.obj~1/RELEASE_PPC
    panic(cpu 0 caller 0xFFFF0004): 0x400 - Inst access
    Latest stack backtrace for cpu 0:
    Backtrace:
    0x00095718 0x00095C30 0x0002683C 0x000A8384 0x000ABD00
    Proceeding back via exception chain:
    Exception state (sv=0x3818E280)
    PC=0x00000000; MSR=0x40009030; DAR=0x0000D8EC; DSISR=0x40000000; LR=0x0025EF70; R1=0x22073D00; XCP=0x00000010 (0x400 - Inst access)
    Backtrace:
    0x00000000 0x0025F174 0x0025D26C 0x0025CFCC 0x002AABD4 0x000ABEB0
    0x73747269
    backtrace terminated - frame not mapped or invalid: 0xF00FF840
    Exception state (sv=0x37DFF000)
    PC=0x9001494C; MSR=0x0000D030; DAR=0xA130C1EB; DSISR=0x40000000; LR=0x907DCC74; R1=0xF00FF840; XCP=0x00000030 (0xC00 - System call)
    Kernel version:
    Darwin Kernel Version 8.6.0: Tue Mar 7 16:58:48 PST 2006; root:xnu-792.6.70.obj~1/RELEASE_PPC
    Wed Jun 21 01:08:21 2006
    Unresolved kernel trap(cpu 0): 0x400 - Inst access DAR=0x000000000000D8EC PC=0x0000000000000000
    Latest crash info for cpu 0:
    Exception state (sv=0x3818E280)
    PC=0x00000000; MSR=0x40009030; DAR=0x0000D8EC; DSISR=0x40000000; LR=0x0025EF70; R1=0x22073D00; XCP=0x00000010 (0x400 - Inst access)
    Backtrace:
    0x00000000 0x0025F174 0x0025D26C 0x0025CFCC 0x002AABD4 0x000ABEB0
    0x73747269
    backtrace terminated - frame not mapped or invalid: 0xF00FF840
    Proceeding back via exception chain:
    Exception state (sv=0x3818E280)
    previously dumped as "Latest" state. skipping...
    Exception state (sv=0x37DFF000)
    PC=0x9001494C; MSR=0x0000D030; DAR=0xA130C1EB; DSISR=0x40000000; LR=0x907DCC74; R1=0xF00FF840; XCP=0x00000030 (0xC00 - System call)
    Kernel version:
    Darwin Kernel Version 8.6.0: Tue Mar 7 16:58:48 PST 2006; root:xnu-792.6.70.obj~1/RELEASE_PPC
    panic(cpu 0 caller 0xFFFF0004): 0x400 - Inst access
    Latest stack backtrace for cpu 0:
    Backtrace:
    0x00095718 0x00095C30 0x0002683C 0x000A8384 0x000ABD00
    Proceeding back via exception chain:
    Exception state (sv=0x3818E280)
    PC=0x00000000; MSR=0x40009030; DAR=0x0000D8EC; DSISR=0x40000000; LR=0x0025EF70; R1=0x22073D00; XCP=0x00000010 (0x400 - Inst access)
    Backtrace:
    0x00000000 0x0025F174 0x0025D26C 0x0025CFCC 0x002AABD4 0x000ABEB0
    0x73747269
    backtrace terminated - frame not mapped or invalid: 0xF00FF840
    Exception state (sv=0x37DFF000)
    PC=0x9001494C; MSR=0x0000D030; DAR=0xA130C1EB; DSISR=0x40000000; LR=0x907DCC74; R1=0xF00FF840; XCP=0x00000030 (0xC00 - System call)
    Kernel version:
    Darwin Kernel Version 8.6.0: Tue Mar 7 16:58:48 PST 2006; root:xnu-792.6.70.obj~1/RELEASE_PPC
    Wed Jun 21 11:02:07 2006
    Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000003CF73AC PC=0x000000000003ECC8
    Latest crash info for cpu 0:
    Exception state (sv=0x3867A280)
    PC=0x0003ECC8; MSR=0x00001030; DAR=0x03CF73AC; DSISR=0x40000000; LR=0x0003ED2C; R1=0x21FD3AC0; XCP=0x0000000C (0x300 - Data access)
    Backtrace:
    0x00000000 0x0003ED2C 0x0003F0C0 0x0001CF90 0x0001CE78 0x0001AC44
    0x00029574 0x0002E614 0x0003C744 0x000A9894
    Proceeding back via exception chain:
    Exception state (sv=0x3867A280)
    previously dumped as "Latest" state. skipping...
    Exception state (sv=0x3846A500)
    PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
    Kernel version:
    Darwin Kernel Version 8.6.0: Tue Mar 7 16:58:48 PST 2006; root:xnu-792.6.70.obj~1/RELEASE_PPC
    panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
    Latest stack backtrace for cpu 0:
    Backtrace:
    0x00095718 0x00095C30 0x0002683C 0x000A8384 0x000ABD00
    Proceeding back via exception chain:
    Exception state (sv=0x3867A280)
    PC=0x0003ECC8; MSR=0x00001030; DAR=0x03CF73AC; DSISR=0x40000000; LR=0x0003ED2C; R1=0x21FD3AC0; XCP=0x0000000C (0x300 - Data access)
    Backtrace:
    0x00000000 0x0003ED2C 0x0003F0C0 0x0001CF90 0x0001CE78 0x0001AC44
    0x00029574 0x0002E614 0x0003C744 0x000A9894
    Exception state (sv=0x3846A500)
    PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
    Kernel version:
    Darwin Kernel Version 8.6.0: Tue Mar 7 16:58:48 PST 2006; root:xnu-792.6.70.obj~1/RELEASE_PPC
    Wed Jun 21 14:10:27 2006
    Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000000000001 PC=0x00000000001026EC
    Latest crash info for cpu 0:
    Exception state (sv=0x456C0780)
    PC=0x001026EC; MSR=0x00001030; DAR=0x00000001; DSISR=0x40000000; LR=0x001026E0; R1=0x220E3490; XCP=0x0000000C (0x300 - Data access)
    Backtrace:
    0x001026E0 0x00102BD8 0x0002CE94 0x002741FC 0x00274670 0x00008ED0
    0x02768EC8
    backtrace terminated - frame not mapped or invalid: 0xF0F00000
    Proceeding back via exception chain:
    Exception state (sv=0x456C0780)
    previously dumped as "Latest" state. skipping...
    Exception state (sv=0x388E7780)
    PC=0x90019ACC; MSR=0x0000D930; DAR=0x37FEDFC6; DSISR=0x40000000; LR=0x000115E0; R1=0xBFFFF400; XCP=0x00000030 (0xC00 - System call)
    Kernel version:
    Darwin Kernel Version 8.6.0: Tue Mar 7 16:58:48 PST 2006; root:xnu-792.6.70.obj~1/RELEASE_PPC
    panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
    Latest stack backtrace for cpu 0:
    Backtrace:
    0x00095718 0x00095C30 0x0002683C 0x000A8384 0x000ABD00
    Proceeding back via exception chain:
    Exception state (sv=0x456C0780)
    PC=0x001026EC; MSR=0x00001030; DAR=0x00000001; DSISR=0x40000000; LR=0x001026E0; R1=0x220E3490; XCP=0x0000000C (0x300 - Data access)
    Backtrace:
    0x001026E0 0x00102BD8 0x0002CE94 0x002741FC 0x00274670 0x00008ED0
    0x02768EC8
    backtrace terminated - frame not mapped or invalid: 0xF0F00000
    Exception state (sv=0x388E7780)
    PC=0x90019ACC; MSR=0x0000D930; DAR=0x37FEDFC6; DSISR=0x40000000; LR=0x000115E0; R1=0xBFFFF400; XCP=0x00000030 (0xC00 - System call)
    Kernel version:
    Darwin Kernel Version 8.6.0: Tue Mar 7 16:58:48 PST 2006; root:xnu-792.6.70.obj~1/RELEASE_PPC
    Fri Jun 23 09:54:51 2006
    Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x000000002C1D9000 PC=0x000000000094F040
    Latest crash info for cpu 0:
    Exception state (sv=0x3846F780)
    PC=0x0094F040; MSR=0x0000B030; DAR=0x2C1D9000; DSISR=0x42000000; LR=0x0094EFC0; R1=0x22053BF0; XCP=0x0000000C (0x300 - Data access)
    Backtrace:
    0x0094EFC0 0x0092CFAC 0x002E87E0 0x002EA6AC 0x0008C4B0 0x000291C0
    0x000233AC 0x000AC02C 0x67743B49
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.ATIRadeon9700(4.1.8)@0x925000
    dependency: com.apple.iokit.IOPCIFamily(1.7)@0x459000
    dependency: com.apple.iokit.IOGraphicsFamily(1.4.1)@0x843000
    dependency: com.apple.iokit.IONDRVSupport(1.4.1)@0x867000
    Proceeding back via exception chain:
    Exception state (sv=0x3846F780)
    previously dumped as "Latest" state. skipping...
    Exception state (sv=0x38535780)
    PC=0x9000B0A8; MSR=0x0200F030; DAR=0x000E9F50; DSISR=0x40000000; LR=0x9000AFFC; R1=0xBFFFE8E0; XCP=0x00000030 (0xC00 - System call)
    Kernel version:
    Darwin Kernel Version 8.6.0: Tue Mar 7 16:58:48 PST 2006; root:xnu-792.6.70.obj~1/RELEASE_PPC
    panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
    Latest stack backtrace for cpu 0:
    Backtrace:
    0x00095718 0x00095C30 0x0002683C 0x000A8384 0x000ABD00
    Proceeding back via exception chain:
    Exception state (sv=0x3846F780)
    PC=0x0094F040; MSR=0x0000B030; DAR=0x2C1D9000; DSISR=0x42000000; LR=0x0094EFC0; R1=0x22053BF0; XCP=0x0000000C (0x300 - Data access)
    Backtrace:
    0x0094EFC0 0x0092CFAC 0x002E87E0 0x002EA6AC 0x0008C4B0 0x000291C0
    0x000233AC 0x000AC02C 0x67743B49
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.ATIRadeon9700(4.1.8)@0x925000
    dependency: com.apple.iokit.IOPCIFamily(1.7)@0x459000
    dependency: com.apple.iokit.IOGraphicsFamily(1.4.1)@0x843000
    dependency: com.apple.iokit.IONDRVSupport(1.4.1)@0x867000
    Exception state (sv=0x38535780)
    PC=0x9000B0A8; MSR=0x0200F030; DAR=0x000E9F50; DSISR=0x40000000; LR=0x9000AFFC; R1=0xBFFFE8E0; XCP=0x00000030 (0xC00 - System call)
    Kernel version:
    Darwin Kernel Version 8.6.0: Tue Mar 7 16:58:48 PST 2006; root:xnu-792.6.70.obj~1/RELEASE_PPC
    Fri Jun 23 11:58:12 2006
    panic(cpu 0 caller 0x000A8D80): Uncorrectable machine check: pc = 000000000009D78C, msr = 0000000000141000, dsisr = 0A000000, dar = 000000008FE532C8
    AsyncSrc = 0000000000000000, CoreFIR = 0000000000000000
    L2FIR = 0000000000000000, BusFir = 0000000000000000
    Latest stack backtrace for cpu 0:
    Backtrace:
    0x00095718 0x00095C30 0x0002683C 0x000A8D80 0x000A8010 0x000ABD00
    Proceeding back via exception chain:
    Exception state (sv=0x39DFD780)
    PC=0x0009D78C; MSR=0x00141000; DAR=0x8FE532C8; DSISR=0x0A000000; LR=0x0009D6C8; R1=0x21FC34D0; XCP=0x00000008 (0x200 - Machine check)
    Backtrace:
    0x030DE948 0x0009A0A8 0x00098EB4 0x0006AA14 0x0006B100 0x0006B5F0
    0x00038070 0x002658B8 0x002722EC 0x00025250 0x000AC138 0x00026CF4 0x000A8B3C 0x000A88FC
    0x000ABD00
    Exception state (sv=0x37B23500)
    PC=0x90A3AF80; MSR=0x0000D030; DAR=0x00000000; DSISR=0x40000000; LR=0x90A3AED0; R1=0xBFFFF5E0; XCP=0x00000003 (Unknown)
    Kernel version:
    Darwin Kernel Version 8.6.0: Tue Mar 7 16:58:48 PST 2006; root:xnu-792.6.70.obj~1/RELEASE_PPC
    Fri Jun 23 13:10:39 2006
    Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000000000180 PC=0x00000000002D6F08
    Latest crash info for cpu 0:
    Exception state (sv=0x383A5500)
    PC=0x002D6F08; MSR=0x00009030; DAR=0x00000180; DSISR=0x40000000; LR=0x0092939C; R1=0x2205BC70; XCP=0x0000000C (0x300 - Data access)
    Backtrace:
    0x0092B634 0x0092939C 0x0092A904 0x0092A9E0 0x002D0940 0x002CF808
    0x000A9894
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.ATIRadeon9700(4.1.8)@0x925000
    dependency: com.apple.iokit.IOPCIFamily(1.7)@0x459000
    dependency: com.apple.iokit.IOGraphicsFamily(1.4.1)@0x8ba000
    dependency: com.apple.iokit.IONDRVSupport(1.4.1)@0x8de000
    Proceeding back via exception chain:
    Exception state (sv=0x383A5500)
    previously dumped as "Latest" state. skipping...
    Exception state (sv=0x3D415C80)
    PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
    Kernel version:
    Darwin Kernel Version 8.6.0: Tue Mar 7 16:58:48 PST 2006; root:xnu-792.6.70.obj~1/RELEASE_PPC
    panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
    Latest stack backtrace for cpu 0:
    Backtrace:
    0x00095718 0x00095C30 0x0002683C 0x000A8384 0x000ABD00
    Proceeding back via exception chain:
    Exception state (sv=0x383A5500)
    PC=0x002D6F08; MSR=0x00009030; DAR=0x00000180; DSISR=0x40000000; LR=0x0092939C; R1=0x2205BC70; XCP=0x0000000C (0x300 - Data access)
    Backtrace:
    0x0092B634 0x0092939C 0x0092A904 0x0092A9E0 0x002D0940 0x002CF808
    0x000A9894
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.ATIRadeon9700(4.1.8)@0x925000
    dependency: com.apple.iokit.IOPCIFamily(1.7)@0x459000
    dependency: com.apple.iokit.IOGraphicsFamily(1.4.1)@0x8ba000
    dependency: com.apple.iokit.IONDRVSupport(1.4.1)@0x8de000
    Exception state (sv=0x3D415C80)
    PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
    Kernel version:
    Darwin Kernel Version 8.6.0: Tue Mar 7 16:58:48 PST 2006; root:xnu-792.6.70.obj~1/RELEASE_PPC
    Fri Jun 23 13:36:23 2006
    Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000000000180 PC=0x00000000002D6F08
    Latest crash info for cpu 0:
    Exception state (sv=0x383A5500)
    PC=0x002D6F08; MSR=0x00009030; DAR=0x00000180; DSISR=0x40000000; LR=0x0092939C; R1=0x2205BC70; XCP=0x0000000C (0x300 - Data access)
    Backtrace:
    0x0092B634 0x0092939C 0x0092A904 0x0092A9E0 0x002D0940 0x002CF808
    0x000A9894
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.ATIRadeon9700(4.1.8)@0x925000
    dependency: com.apple.iokit.IOPCIFamily(1.7)@0x459000
    dependency: com.apple.iokit.IOGraphicsFamily(1.4.1)@0x8ba000
    dependency: com.apple.iokit.IONDRVSupport(1.4.1)@0x8de000
    Proceeding back via exception chain:
    Exception state (sv=0x383A5500)
    previously dumped as "Latest" state. skipping...
    Exception state (sv=0x3D415C80)
    PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
    Kernel version:
    Darwin Kernel Version 8.6.0: Tue Mar 7 16:58:48 PST 2006; root:xnu-792.6.70.obj~1/RELEASE_PPC
    panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
    Latest stack backtrace for cpu 0:
    Backtrace:
    0x00095718 0x00095C30 0x0002683C 0x000A8384 0x000ABD00
    Proceeding back via exception chain:
    Exception state (sv=0x383A5500)
    PC=0x002D6F08; MSR=0x00009030; DAR=0x00000180; DSISR=0x40000000; LR=0x0092939C; R1=0x2205BC70; XCP=0x0000000C (0x300 - Data access)
    Backtrace:
    0x0092B634 0x0092939C 0x0092A904 0x0092A9E0 0x002D0940 0x002CF808
    0x000A9894
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.ATIRadeon9700(4.1.8)@0x925000
    dependency: com.apple.iokit.IOPCIFamily(1.7)@0x459000
    dependency: com.apple.iokit.IOGraphicsFamily(1.4.1)@0x8ba000
    dependency: com.apple.iokit.IONDRVSupport(1.4.1)@0x8de000
    Exception state (sv=0x3D415C80)
    PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
    Kernel version:
    Darwin Kernel Version 8.6.0: Tue Mar 7 16:58:48 PST 2006; root:xnu-792.6.70.obj~1/RELEASE_PPC
    As a note I really do appreciate people looking at my issue and thank anyone in advance what would take a look at this.
    Cheers

  • TS1559 I have two problems but since they both started at the same time I'm guessing that they are related. My WiFi on/off button is greyed out AND my iCloud Drive (under "Settings") has been "Upgrading" with that spinning download symbol for 2 wks now! N

    I cant be positive but I think this started when my iPhone did an automatic software update. I couldn't get any WiFi connection because when I go to turn it back on the iPhone wont let me and Greys out my WiFi on/off button.
    But also I think something happened to my iCloud connect as well because next to my iCloud Drive under "Settings" it has that spinning symbol that usually denotes waiting for something to finish downloading. But this time it never stopped! Its been spinning saying "iCloud is Upgrading" for 2 weeks now! I have tried the on/off iPhone restart or reset, and I've even put my iPhone into "Recovery Mode" as a last resort. but when iTunes was finished "Restoring" it, nothing had changed; Still Greyed out WiFi button and iCloud is still "Upgrading"! Help please!

    Hi Ichin,
    I am a bit confused with your statement -
    if ((p_select_list is not null) and (p_text_field is not null)) then
    return true;
    elsif ((p_select_list is null) and (p_text_field is null)) then
    return true;
    else
    return false;
    end if;Here this statement -
    if ((p_select_list is not null) and (p_text_field is not null)) then
    return true;returning the result TRUE when both fields are not null
    And this statement -
    elsif ((p_select_list is null) and (p_text_field is null)) then
    return true;returning the result TRUE again when both fields are null. If you see closely basically is not validating becoz it returning true whatever the input is.
    I do not know what you want to use the second statement when you have else statement at the end. It will return false if one or both fields are null unless you want to validate either text field.
    Hope this make sense.
    Regards,
    M Tajuddin
    web: http://tajuddin.whitpeagesbd.com

  • The back, forward, reload and stop buttons are greyed out, the address bar stays blank when I go to a website and firefox loads to a blank page, not my home page. There are 3 users on this computer and it only happens on one user.

    Firefox loads to a blank page, not my home page. When I click on the home button it takes me to the home page. The back, forward, refresh and stop buttons are greyed out and not usable. The webpage I am on does not show up in the address bar. If I type something into the address bar, that address stays there no matter what page I go to next.

    Just upgraded to v4. It did NOT fix the problem.

  • Hi please help! After setting up a new mail account my wifi button has greyed out. I've tried rebooting it ie turning off and on but no joy. I'm a complete technophobe and have no idea what to do next. I can receive emails but am unable to reply. HELP PLS

    Please can someone help a total technophobe?!!! I have recently set up a new mail account and since I've done that my wifi button has greyed out. Not sure what happened as I had help from my daughter. She doesn't think that she did anything wrong as has been an iPhone user since day one!! She's at work now so I'm totally lost. Please help. Many thanks.

    it's' an issue on 4S..... here same problem, even after restore the firmware.... wifi and bt are lost....

  • I have apple iPhone 4S upgraded to iOS 6.0.1 and everything was working fine suddenly my Wifi was not connecting and found the wifi on/off button is greyed out and to enable it I tried all resets but still my problem have not solved, still wifi is off

    I have apple iPhone 4S upgraded to iOS 6.0.1 and everything was working fine suddenly my Wifi was not connecting and found the wifi on/off button is greyed out and to enable it I tried all resets but still my problem have not solved, still wifi is off

    Same here.... No fix. Replacing is the option apparently and if you're out of warranty, you're SOL. That was as per the "Genius" at Apple.

  • When I open a second Firefox browser window, the URL address window, instead of showing the URL, says "Go to a Web Site;" also, and more importantly, the "back" button is greyed out. This is a new problem, and the first Firefox window I open works fine.

    After I open the first Firefox browser window, any additional window I open does not open my homepage, but opens a blank page with "New Tab" showing on the tab. An orange "Firefox" tab with a drop down arrow shows at the upper left hand corner of the screen. All of the options (File, Edit, etc.) are greyed out, however they will work if you move your cursor over them.
    The URL address window says "Go to a Web Site". After I've gone to a website, the back button remains greyed out and I am not able to go back to a previous page. My RoboForm and Netcraft toolbars only show up in an abbreviate form. The add-on bar doesn't show up at all.
    Again, this is a recent problem, and only happens after I've opened one browser window (which works fine) and then open additional browser windows (as few as one additional).

    I had this same problem. Seems to be caused by the web developer tool bar FF extension (this started happening after a recent update to that extension). After disabling it, my FF is back to normal :)

  • I am not able to import photos into Lightroom 5.7.  When I select a folder, it doesn't show a preview of the images and the import button is greyed out. ??

    I am not able to import photos into Lightroom 5.7.  When I select a folder, it doesn't show a preview of the images and the import button is greyed out. ??
    I have been using Lightroom 5 for 2-3 months now and all worked well, up until today's effort to import a new set of photos. I am working on a Mac with Yosemite 10.10.1.

    Go to the bibliothec module, select the folder, right click on the folder and hit synchronize
    Sorry I have only a german version , so don't know what your menu will show.

  • I have an iPod touch 4th gen and it updated by itself to iOS6 without a wifi connection. When I unlocked it, it told me to connect to iTunes. So, I updated the software and when the update was finished, my wifi button was greyed out. I'm cant turn on wifi

    My iPod updated by itself without a wifi connection. It told me to connect it to iTunes so I did and I updated the software and everything. After it was updated, my wifi button was greyed out and I don't know why. I sent it in to get fixed and the Apple store did NOTHING. I still have about 48 days left on my one year waranty and I don't know what to do to fix the problem. Please, does anyone know how to fix this issue without selling it or replacing it? I've tried all the troubleshooting techniques and nothing is working. Someone help.

    Here:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    An appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar

  • I just updated my iPhone 6 to IOS 8.3. My safari will not let me search anything. If I type in a website URL, the Go button is greyed out. If I type in something to search on google, I press Go and nothing happens. Does anyone know how to fix this?

    I just updated my iPhone 6 to IOS 8.3. My safari will not let me search anything. If I type in a website URL, the Go button is greyed out. If I type in something to search on google, I press Go and nothing happens. Does anyone know how to fix this?
    I have cleared history, reset my phone, tried using wifi and mobile data.

    I have this problem too and have tried all suggestions to fix, with no luck.
    Safari did work for a short time by switching to Private, but stopped working soon after

  • TS1398 The wifi button has greyed out and will not open at all. I know this has been happening to a lot of iPhones six the io6 update. How to fix one very distressed daughter

    The wifi button has greyed out on iphone4s. What to do I have a very distressed daughter here?

    Heard about this strange my 4s is fine after updating.
    Back up the device to either itunes or cloud
    and try to restore the device

  • My password lock cannot be turned off (button is greyed out and does not react) and I cannot set to "simple" password (4 digits) for the same reason (button greyed out)

    Today, I got a message from my iphone 4 telling me that my password was expired and that I had to change it.
    Now I am forced to enter a 8 character long password and I cannot turn off the password lock (button is greyed out and does not react) and I cannot change to "simple" code.
    I am so upset that I am considering throwing the bloody thing to the rubbish bin
    Can you help?

    Have a work Exchange account on your phone? These policies can be enforced by a profile installed on your phone. There is nothing you can do to change this except delete the Exchange account.

  • My ipods wifi button is greyed out and will not connect to any wifi

    My ipod touch 4g is not connecting to wifi anywhere. My wifi button is greyed out and I have done everything that I can think of to fix it and nothing has worked. I habe restored it many times. I have reset my network settings and all of my settings mutipul times also. I have looked to see if there was problem with my wifi and there is nothing wrong with it. Please help. Thanks.

    Hi there madcheo,
    I would recommend taking a look at the troubleshooting steps found in the article below if your Wi-Fi settings are grayed out. 
    iOS: Wi-Fi settings grayed out or dim
    -Griff W.

  • Aperture import plug-in won't run.  After examining my library the number of image files stays at "undetermined" and the import button stays greyed out.  Any thoughts?

    Aperture import plug-in won't run.  After examining my library the number of image files stays at "undetermined" and the import button stays greyed out.  Any thoughts?

    Others have the same issue, with the import button being grayed out.  My trail copy expired, but I believe by poking around in the options and selecting another Aperture library and re-selecting, I was able to continue.
    The problem is common enough, that hopefully Adobe will address.  In the mean time, try repairing your Aperture library, checking permissions, exporting a subset of your library for a test, or try putting that library subset on an external drive.  (Can usually avoid permissions issues.)

  • My i4s wifi button is not working. when i opened the setting and then wifi the button is greyed out. then i opened general and then about. in the bar of wifi address it is written N/A. what does its mean. i have done all other things like setting general

    my i4s wifi button is not working. when i opened the setting and then wifi the button is greyed out. then i opened general and then about. in the bar of wifi address it is written N/A. what does its mean. i have done all other things like setting >general<reset<reset network setting. but all in vain. tell me the solution

    restore your phone as new through itunes. if the issue persists after a factory restore via itunes, it means you've got a hardware issue and the phone needs to be repaired

Maybe you are looking for

  • My old Mac no longer connects to network. ideas?

    I have an awesome old cube that I use to connect to the network and play music for the room it's in using the tunes library from another computer. My problem is that since I changed to a static IP on my network, I can no longer see the LAN. It connec

  • Need Guidence For the future on Bussiness One

    Hi Experts, This is Krishna , Now a days i want to do the SAP Business One certification , but i don't know about It  and IT's Market Exactly, So plz guide me in this way , What about the Market of Business One. Thanks & Regards     Krishna

  • Can anyone explain me this process

    Hi All, i have got one critical scenario...where.. i get four files(file can flat file or XML) as input......in the input directory in XI when the first file comes into input directory.. <b>first file should be picked separately by XI ..</b> when the

  • Is the Ipad Air's glass too thin  that it can crack due to pressure??

    I have an Ipad Air and so far I love its amazing; however I am just a bit bothered by the plastic feel of the screen. I am to understand this is due to the fact that the screen is made with a thinner glass thus the plastic feel.  My concern is if the

  • "select distinct" from itab data?

    Hi anyone know how to do a "select distinct" from itab data and do some calculation. For example: This is my itab result data: Col1 | Col2    | Col3 | col4 123  |000010 |a      |  10.00 123  |000010 |b      |  2.00 123  |000010 |c      |  3.00 123  |