TX - VersaMail cannot launch - "missing localization information"

Some time ago, I'd been having problems with VersaMail resetting my TX every time I tried to launch it, but I followed the directions in Knowledge Base Article #36541 (Parts One and Two) and it solved the problem beautifully. However, after several weeks, the problem returned this morning, so I followed those same instructions again (or at least I thought I did!), but now whenever I try to launch VersaMail on my TX, I get the following "Launch Error" message:
"The application cannot be launched because it is missing localization information."
I've tried restoring the deleted files from my Desktop's Palm User folder and re-synching, but still get the error. If anybody can help me get this resolved quickly, I'd really appreciate it.
Thanks.
Post relates to: Palm TX

Thanks for the reassurance about NVBackup 1.22b9. I'll probably try to install it sometime soon when I get the time.
As to NVB's copying itself to the card, I had indeed checked the box in Preferences to have it do that; that wasn't my problem. My problem was that after backing up to the card and doing a hard reset, NVB was no longer on my TX and I couldn't figure a way to access NVB on my card to do a Restore. As a result, I used Palm Desktop to reload NVB to the TX by means of a HotSync, but when I tested my VersaMail after the HotSync it worked perfectly, so there was no need to do a Restore from the card.
My remaining question: In an event such as this, where I've done a hard reset and NVB no longer exists on the TX, but is resident on the card, is there any way I can access the NVB on the card to initiate the Restore - without having to reload NVB first - or do I have to reload NVB first by means of the Desktop, then do a HotSync, and only then do a Restore? Put another way, can the NVB on the card only be accessed when NVB is resident on the TX (which wouldn't make sense, as why then would anyone ever bother to put NVB on the card in the first place?), or can it somehow be accessed on the card even when NVB is absent on the TX, as it is after a hard reset?
In short, if there's any way to access the NVB on the card directly after a hard reset without having to first reload NVB to the TX, I'd appreciate knowing how to do it.
Thanks again for all your help.
Post relates to: Palm TX

Similar Messages

I have Photoshop 7 on a laptop with windows 8.1. When I try to open Photoshop 7 I get the error message "cannot open missing personalization information". What is this and how can I fix it?

I have Photoshop 7.0. This is on a laptop running windows 8.1. When I try to open it I get the errro message: " cannot open missing personalization information".
what is this and how can I fix it.

Run it in compatibility mode and input the credentials.
Mylenium

Palm Missing Localization Information Display after Mac OS 10.4.6 Update

Recently I installed the Mac OS 10.4.6 update after confirming that it should improve some minor issues with "Hot Synching".
Previously I could "Hot Synch" with my Palm Mac Desk Top software 4.2.1 and also with my PC with no issues. My Palm is using Palm OS 4.5, I believe.
Now I can still can "Hot Sync" on my Mac--with no issues. However, when I take the Palm out of the USB Cradle and try to access the Palm Display page with the featured icons, I get a very unusual error:
"Application can not be launched because it is missing localization info file xxx--enUS.prc."
I checked the Palm site and entered the error message and the response was returned that indicated "several applications with the Palm Tungsten T require overlay files to run properly. "Dialer, SMS, & WAP Browser" require and overlay "prc" file that determines which language the application displays on the device. If this "prc" file is missing, it will cause this message to be displayed."
I was instructed to install the "xxx_enUS.prc" using the Palm Install tool.
I installed all of the "xxx_enUS.prc" files on Disk 2 and have performed a "Hot Sync" again. A successful "Hot Synch" was performed.
The above message is still displayed on the Palm screen even after that successful "Hot Synch".
I can not use any of the screen icons to select any of the features or vprograms on the Palm.
The face buttons can be depressed but the selection from the Palm hand held icons with the stylus can not be accessed as the "missing localization info, ect" is displayed.
I have performed soft resets to no avail.
I still can not get this issues resolved.
Recently I instlled iSynch and the problems still occur.
Anyone out there have any suggestions.
POWER MAC G-4 (933 MHz QuickSilver) Mac OS X (10.4.6) iSite
POWER MAC G-4 (933 MHz QuickSilver) Mac OS X (10.4.6) iSite

When I do Command-I, I see that I have read/write access for the local drive - depending on the machine I am sitting at - and the other networkeded drives allow read only.
I guess the question is - how does the system know a user with the same username and password are actually the same person?
Robert

Mail cannot access your mailbox information because it is in use

I have my mail on a Truecrypt drive and I have an alias pointing to that drive in my library and so sometimes I get this message:
"Mail cannot access your mailbox information because it is in use."
Options are:
"Quit and rebuild Information" or "Quit"
If I rebuild then I was losing all my sent messages which is a drag and it takes a while to re-download all the messages. So what I tried was deleting the Envelope Index.lock file and then launch mail and it started up with no problems.
I think the reason this is happening is that it is possible that when I shut my computer down, Truecrypt dismounts the drive while Mail is accessing the mail folder (hence the lock file) and so when I start up again and remount the truecrypt drive that lock file is still there and I have to delete it or Mail thinks some other program is using the mail folder. Just a guess.
Hope this helps someone else if they Google this error.

I do but I do it from another computer -- that is the whole point of IMAP, by the way. I don't see how my accessing the IMAP server from another computer should cause Mail.app to think that my mailboxes on my local host, which are just copies, need to be rebuilt. I filed a bug on this and Apple gave me the annoying "Known issue" response, which means maybe they'll fix it, maybe not, thank you very much. It went away for a while, and now it's back again... sigh.

Java.rmi.ServerException: Missing port information

when i call the service ,i got the error:
run-test-client:
[java] java.rmi.ServerException: Missing port information
[java] at com.sun.xml.rpc.client.StreamingSender._raiseFault(StreamingS
ender.java:382)
[java] at com.sun.xml.rpc.client.StreamingSender._send(StreamingSender.
java:234)
[java] at sys.SetIF_Stub.getdeviceid(SetIF_Stub.java:68)
[java] at sys.StockPriceFetcher.getdeviceid(Unknown Source)
[java] at sys.TestPriceFetcher.main(Unknown Source)
what cause it??
in my SetImpl.java i use wurfltags.jar
//SetImpl.java
package sys;
import java.io.*;
import java.net.*;
import java.util.*;
import net.sourceforge.wurfl.wurflapi.*;
public class SetImpl implements SetIF {
     private String ret="";
private ProConf pc;
private MyObjectsManager mom;
     public SetImpl(){}
public String getdeviceid(String request)
String result="";
try{
mom=new MyObjectsManager();
mom.wurflWebInit();
UAManager uam =mom.getUAManagerInstance();
result=uam.getDeviceIDFromUA("MOT-T720/05.08.41R MIB/2.0 Profile/MIDP-1.0 Configuration/CLDC-1.0");
System.out.println(result);
catch(Exception e){}
return result;
and, i generate the wsdl file and deploy it successfully. but in the client
when i call the service it will be error.
the client code is:
/////////StockPriceFetcher.java
package sys;
import javax.xml.rpc.*;
import com.sun.xml.rpc.client.*;
public final class StockPriceFetcher {
public static final String getdeviceid(String req,String endpoint) {
String result="";
try {
SetIF_Stub stub =(SetIF_Stub)(new SystemConfiguration_Impl().getSetIFPort());
stub._setProperty(javax.xml.rpc.Stub.ENDPOINT_ADDRESS_PROPERTY,endpoint);
result = stub.getdeviceid(req);
} catch (Exception ex) {
ex.printStackTrace();
return result;
} // getLonNowItem
//////////////////////TestPriceTetcher.java
package sys;
import java.math.BigDecimal;
import java.util.*;
public class TestPriceFetcher {
public static void main(String[] args) {
try {
// String result=StockPriceFetcher.endsetinfo("ball=5&srv=7&pcode=500001","http://192.152.251.224:8080/jaxrpc-sys/jaxrpc");
String result=StockPriceFetcher.getdeviceid("ball=5&srv=7&pcode=500001","http://192.152.251.224:8080/jaxrpc-sys/jaxrpc");
System.out.println(result+"bb");
} catch (Exception ex) {
ex.printStackTrace();
when i run the testpricefetcher.java it will raise the above error infomation.
it spent 2 days for me to find the problem, but i cannot solve it.
i think it does matter with the wurfl package.because i doesnt use the method of the package in the SetImpl.java it will be ok. How to call the package?please give me a hand.

can you give me a hand!thank you

"Missing port information" and NoClassDefFoundError

I'm developing a Web Service using JWSPD1.2, and I'm having some problem in executing a client which accesses to the service I'm publishing.
On Client side the error is:
java.rmi.ServerException: Missing port information
at com.sun.xml.rpc.StreamingSender._send
On Server side (file $(JWSPD_HOME)/logs/launcher.server.log) I found out that the thrown exception is a NoClassDefFoundError.
The class that is not found, however, is included in a library that I'm linking on the command line, so I can't understand why this exception is thrown...
Has anyone of you been involved in a similar problem?
Perhaps I have to link the library somewhere else, but I don't know where...
Thanks in advance for your help!

Hi ! I am getting the same error at the client side :
java.rmi.ServerException: Missing port information
at com.sun.xml.rpc.client.StreamingSender._raiseFault(StreamingSender.java:370)
at com.sun.xml.rpc.client.StreamingSender._send(StreamingSender.java:231)
at com.sun.xml.rpc.client.dii.CallInvokerImpl.doInvoke(CallInvokerImpl.java:56)
at com.sun.xml.rpc.client.dii.BasicCall.invoke(BasicCall.java:281)
at DIIClient.main(DIIClient.java:111)
can u just tell me how the problem was solved and what were the jar files u had set in the classpath. Pls help me i am new to webservices. Thanx in advance

Windows 2008 windows service cannot launch Adobe Reader

I created a windows service that receives pdf files in one folder and should print them opening adobe reader. In my PC with Windows 7 it works just fine but when the application is deployed in Windows 2008 R2 server then the windows service is not able to
launch Adobe Reader.
I searched on Internet and I found that it might be related to the Session 0 used by the services.
I tried multiple possible solutions without success.
Thank you in advance for any support with this issue

Hi,
Are there any related error messages logged?
If not, I suggest you use Process Monitor to find out why exactly Windows cannot launch Adobe Reader.
Process Monitor v3.1
https://technet.microsoft.com/en-us/sysinternals/bb896645?f=255&MSPPError=-2147217396
In addition, here is a troubleshooting link below for you:
Troubleshoot PDFs that won't open
https://helpx.adobe.com/acrobat/kb/cant-open-pdf.html
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

Cannot launch "transport monitor"... what is this?

I just got back from a crash but I think I've been lucky. I booted up from my Tiger startup disc, did an archive and install and I think everything is pretty much ok. I do get one red flag when i log in though and I cannot find any online information about this or what to do. The message: The application "Transport Monitor" could not be launched because of a Shared Library error: "8<TransportMonitor><TransportMonitor><HotSyncLib.PPC>".
I'm guessing 2 files labeled TransportMonitor ended up somewhere and one of them has to go. Any help with this?
BTW- great Apple Discussions and archives help! I got all my info on the sites and it led me right through the steps I needed! I wish all the companies out there were so user and customer friendly!
thank-you!
booker
Mac IBook G3
OS X 10.4.11

The error message and component item listed is often in reference
to an installation of Palm desktop software.
One of several articles I found as a result of a search of the error
message ' transport monitor ' that came up says to reinstall the
Palm software again. If you have done an archive & install,
or other system changes were made, some of the parts of such
an application support for hardware may be deficient or corrupt.
{You could see about removing parts of unused software installs
by getting and using a utility such as AppDelete.}
ie: "Error: Transport Monitor could not be launched; fix" - MacFixit:
http://www.macfixit.com/article.php?story=20060508093106808
Other references to the cause of this Transport Monitor error or fix
can be seen in other articles or posts from different locations online.
This topic has also been discussed in Apple Support Discussions.
ie: google search topic, ' mac os x transport monitor ' results page:
http://www.google.com/#hl=en&q=macos+x+transport+monitor&aq=0&oq=Mac+OS+Xtransport&aqi=g1&fp=leBsIIJAIN0
If you have and use the Palm product, you may decide to reinstall the
correct driver software for the item; or find and delete specific parts of
that driver software using AppDelete (comes up in search) & be rid of it.
Good luck & happy computing!

I cannot launch i tunes anymore under my login in on pc however other users can. the error message is i tunes library extras.itdb is locked. i uninstalled and reinstalled and still same problem

I cannot launch i tunes on my pc however others can on same pc under their own login. i uninstalled and reinstalled but erro message is still there - it reads the itunes library extras.itdb file is locked, on a locked disk or you do not have permission for this file.

Hello daglez,
Thank you for using Apple Support Communities.
For more information, take a look at:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Have a nice day,
Mario

Mail cannot launch because it says Home Driectory is full? It is not full!!

Hi There:
I have two users on my computer and for some reason I cannot launch my mail program on one of them. Both users are listed as administrators and I have 2 hard drives installed using a firmtek controller card. The first drive where the OS is installed is an 80Bg drive with more than 57Gb available.
When I launch Mail on the first user ut says:
Mail cannot update your mailboxes becasue your Home Directory is full. You must free up space. Delete unnecessary files or documents. The thing is I have tons of space. The other user I can launch mail with no problems. I do have multiple mailboxes set up with the mail program that has the issues.
Please advise
Thanks
W

Hi Cyclops Images.
Corruption of ~/Library/Mail/Envelope Index is known to cause this bogus error message in Mail, even when there is enough space available on disk.
Verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all the filesystem issues, if any, and making sure that there’s enough space available on the startup disk (a few GB, plus the space needed to make a backup copy of the Mail folder), try this:
1. Quit Mail if it’s running.
2. In the Finder, go to ~/Library/Mail/. Make a backup copy of this folder, just in case something goes wrong, e.g. by dragging it to the Desktop while holding the Option (Alt) key down. This is where all your mail is locally stored.
3. Locate Envelope Index and move it to the Trash. If you see any other “Envelope Index”-named file there, delete it as well.
4. Open Mail. It will tell you that your mail needs to be “imported”. Click Continue and Mail will proceed to re-create Envelope Index — Mail says it’s “importing”, but it just re-creates the index if the mailboxes are already in Mail 2.x format.
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder, i.e. ~/Library is the Library folder within the user’s home folder.

Mail keeps crashing because: "Mailbox cannot access your mailbox information because it's already in use."

I have the new MacBook Pro with Retina Display, and my Apple Mail has always worked just fine. About a week ago, I recieve a message saying "Mail cannot access your mailbox information because it’s already in use." The dialogue box gave me the options of "Rebuilding Mailbox Information" or quitting the application. Rebuilding does absolutely nothing, and every time I try to open Mail I get the same response and have to quit. I haven't added any apps or anything that would affect my mail; what's going on? Thanks!

Try this first.
Isolating Issues
Isolating an issue by using another user account
Isolating issues in Mac OS X
Safe Mode
Safe Mode - About

I cannot update the song information on my iPod in iTunes.

I got an iPod Touch 4g about a year ago. Last month the iPod all the sudden stopped working. I took it into the store twice and the second time they simply replaced it with a new one. Since then I have been having two problems:
1) The operating system has been running extremely slowly. I brought it into the store today and they suggested reinstall the OS and that this should fix the issue with it. I can't really ***** that problem right now.
2) I for some reason cannot update the song information on the iPod directly in iTunes. If I change the name of the song or the album or genre in Itunes that is actually on the iPod, it'll show up as changed in Itunes but on the iPod itself it hasn't changed. On my old one, whenever a change was made it would often say, "One moment while library updates." It doesn't do this on my replacement.
In order to change information for the songs, I need to delete the copy off my iPod, update the information on the computer copy and then retransfer it over. Is there some setting I need to change in order for the changes to take place. I would like to avoid going back to the store a fourth time.

1) Powering off nd then back on the iPOd tends to fix the lag problem for a while
2) The problem with updating music is a known problem with iOS 5 and as you found out, you have to delete/unsync the music form the iPod and then resync.

Java.rmi.ServerException: JAXRPCSERVLET28: Missing port information

Hi
We are getting errors when we run the webservice client..
With this we have also provided the webservice code.
Please any one help us to resolve this issue...
Thanks in advance.
We are using
J2EE 1.4
Error:
java.rmi.ServerException: JAXRPCSERVLET28: Missing port information
at com.sun.xml.rpc.client.StreamingSender._raiseFault(StreamingSender.ja
va:510)
at com.sun.xml.rpc.client.StreamingSender._send(StreamingSender.java:307
at com.sun.xml.rpc.client.dii.CallInvokerImpl.doInvoke(CallInvokerImpl.j
ava:103)
at com.sun.xml.rpc.client.dii.BasicCall.invoke(BasicCall.java:492)
at com.sun.xml.rpc.client.dii.CallInvocationHandler.doCall(CallInvocatio
nHandler.java:121)
at com.sun.xml.rpc.client.dii.CallInvocationHandler.invoke(CallInvocatio
nHandler.java:85)
at $Proxy0.flowrequest(Unknown Source)
at dynamicproxy.MathClient.main(MathClient.java:52)
Web service Client Code:
package dynamicproxy;
import java.net.URL;
import javax.xml.rpc.Service;
import javax.xml.rpc.JAXRPCException;
import javax.xml.namespace.QName;
import javax.xml.rpc.ServiceFactory;
//import com.ibm.ctg.client.JavaGateway;
//import com.ibm.ctg.client.ECIRequest;
import dynamicproxy.*;
public class MathClient
static String message;
static String err=null;
     static StringBuffer sb = null;
     public String s1;
     public static int iValidationFailed = 0;
public static void main(String[] args)
try {
String nameSpaceUri = "urn:Foo";
String serviceName = "CtgService";
String portName = "MathFacePort";
// Specify the location of the WSDL file
URL url = new URL("http://localhost:8080/math-ctgservice/math?WSDL");
// Create an instance of service factory
ServiceFactory serviceFactory = ServiceFactory.newInstance();
// Create a service object to act as a factory for proxies.
Service mathService = serviceFactory.createService(url,
new QName(nameSpaceUri, serviceName));
// Create a proxy
dynamicproxy.MathFace
myProxy = (dynamicproxy.MathFace) mathService.getPort(new
                         QName(nameSpaceUri,
portName), dynamicproxy.MathFace.class);
// Invoke the add method
//System.out.println(myProxy.add(23, 12));
          //get the input value and pass it to the function
               String a = args[0]+"~"+"------------------------------------------------------------";
               //String a = b.toUpperCase();
               // Invoke the add method
               myProxy.flowrequest(a);
               System.out.println("Message:"+message);
     catch (Exception ex)
ex.printStackTrace();
}

As is so often the case, Google is your friend.
Googling for the exception message (JAXRPCSERVLET28: Missing port information) yields the following list.
http://www.google.com/search?hl=en&q=JAXRPCSERVLET28%3A+Missing+port+information&btnG=Google+Search
Follow the bouncing link, it will lead you to the solution.
PS.

After iOS7 update I cannot launch the music app. It crashes after a few seconds of white screen. What to do?

Just updated my iPhone 5 (16g) to iOS7 and now I cannot launch the music app anymore.
It opens and then just crashes after a few seconds of white screen.
Also If I go to Settings General About the phone crashes all the time after just a few seconds. :-(
Andreas

The same for me. iPhone 4S, itunes match and upgrade to ios7 by air.
So what we have:
1) Music app does not launch (white screen then close)
2) About screen crashes (I guess once it tries to calculate music space)
3) Spotlight does not show any results (no care what I set to search in in the preferences)
4) iTunes Match slider can not be set to Off. However, it is possible to logout from AppleID, then it off. But this does not change the situaton at all
5) Podcast app does not launch
I tried to reboot, to sign in with another Apple ID, to turn off itunes Match, to reset all preferences. Nothing helps.
Things to try:
- reset all preferences and content
- reinstall ios7 with itunes from scratch
- switch to windows phone

I have connected my ipad to my computer and logged into iTunes website. To restore my Ipad I have chosen language, country then it asks you to connect with cable and log into iTunes, I have done that, but cannot find this other information I need to resto

I have connected my ipad to my computer and logged into iTunes website. On my iPad to restore my my data Ipad I have chosen language, country then it asks you to connect with cable and log into iTunes, I have done that, but cannot find this other information I need to restore from the website. Can you help me please? the 2 replies, I thank you, but this has not helped with my problem.

Your post is somewhat confusing. To restore your iPad you use the iTunes application on your computer and connect your iPad. Select your iPad in the left column of iTunes on your computer and select General in the right column. You should find the restore choice there.

TX - VersaMail cannot launch - "missing localization information"

Similar Messages

Maybe you are looking for