TX won't connect via USB - Windows "disconnec​ted hardware" sound effect repeats continuall​y

I've had my TX for over two years now, and this month I've encountered an unusual problem.  When I try to connect the Palm to a USB port (any port), the Windows sound effect that indicates a USB device has been detected stutters quickly on one tone (three quick notes), then after a few seconds of silence, it plays the normal disconnected sound effect immediately followed by the three-note monotone stutter.  This continues in and endless loop with neither my PC nor the Palm showing any other signs of it being connected.
Has anyone seen this problem before, and does anyone have any advice?  I've tried soft resets and re-installing the Palm software on the PC, but to no avail.  I cannot even use the Palm as a SD card reader because the Palm won't connect at all.
Post relates to: Palm TX

helo..
try to check the link for some steps
http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=9​,E=0000000000177854458,K=5095,Sxi=19,Case=Obj(36950)
Post relates to: Palm TX

Similar Messages

  • E65 won't connect via USB Cable

    Hello to you all...
    I just got my new Nokia E65 and I couldn't be happier with it. Fantastic phone.
    However I can't connect it to my PC (Windows XP SP2) via the USB Cable...it just won't recognize it. I installed PC Suite with the latest cable drivers and nothing happens. When I connect the cable to the phone it asks if I want to use "data transfer" or "pc Suite" mode, but neither of them work.
    I'm able to connect to PC Suite via infrared, and that works fine. But I want to update my firmware and software updater only works via usb cable.
    Any ideas on what to to?

    more info needed, suite version, cable type, what is visible in pc device manager when you connect phone, what is visible in phone screen when you connct cable, etc.

  • Printer won't connect via USB

    Bought a brand new iMac, and have a Brother HL 2230 printer only 1 year old.  I installed the lastest driver from Brother website...had printer connected and working.  It wouldn't stay online though when computer went to sleep etc...so i had to keep resetting the printer or unplugging and plugging the USB back in.  Now the printer was offline and nothing would work.  Deleted the printer and now i can't get anything to connect.  Computer doesn't recognize at all when USB is plugged in...printer has been reset multiple times, re-installed the drivers, deleted other items from other support suggestions, reset the printer settings and computer...still don't get anything. Completely out of ideas and don't want to buy a new printer!!

    Hi there @Milliecat, welcome to the forums
    I read through your post about the troubles you are having with connecting your printer to your Windows Vista PC, via USB connection.
    I am looking for some more information from you, to help me better research the issue and determine which troubleshooting steps I should recommend for your issue specifically.
    1. Do you have the Deskjet 2540 or a different model of printer?
    How Do I Find My Model Number?
    2. When you run the installation disk or download, what exactly are the errors or issues you see happen during the installation? (If you could send me a screen shot of the error, that would be a bonus).
    3. Have you tried to install the printer on your PC using a different connection method, such as Ethernet or Wireless?
    4. In the meantime, try running the Print and Scan Doctor tool which may fix the problem. If there is a more serious issue, the tool will alert you to it. Please let me know the results or send a screen shot!
    Have a wonderful Friday!
    Hope to hear from you!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • My BB 8520 won't connect via USB after the firmware upgrade

    Hi,
    All was working fine until I followed the upgrade prompts. The 'phone works but a) it won't accept Opera Mini 5.1 (which was in the 'phone already) and b) I cannot connect to the PC via the USB cord.
    What happened?
    This 'phone shares the same SIM card with 3 Nokias (E72, E90, E62) and I've never had firmware upgrade problems with them - in Symbian OS.,
    Any ideas?
    Regards, Douglas
    L. Douglas Henderson - ARTCRAFT Music Rolls
    EDIT: Link Removed. Please review User Guidelines  under section "No spam please."

    Hi, again -
    Just downloaded Bolt and I like it also. (No more zooming: whoopee!)
    Never heard of this browser before, having used Opera Mini/Mobile (depending upon the 'phone) since 2004. Was on E-Mails for cell 'phones dating back to 1997, coast to coast: primitive service back then! [Rarely did I use the default browser on any 'phone I've had, including Motorola and Palm before Nokia.]
    Bolt loaded faster than Opera Mini 5.1 did on my Nokias and the Blackberry 8520: amazing!
    Now my "not as good as a Nokia with Symbian" handset is useful again. The firmware upgrade did improve the videos and the links to them, so it was a GAIN SOME FEATURES and LOSE SOME FEATURES firmware upgrade.
    Probably Opera will have a link for the Blackberry 5 platform, eventually. The problem, I think, was that the link only worked with three versions of their 4 edition.
    You have made my day!
    Thanks.
    Regards, Douglas
    PS: Not until the Nokia E90 Communicator was off the market for a year or so, did Opera put out a Mobile browser which functioned on it. The Communicator - in a variety of versions - had a 12 year run in Finland, something of a record for handsets in this field. For Word .docs, fast typing and office style activities, it's hard to beat. (You can't wear one in your pocket if the garment is Spandex, of course.) The music on the E90 is loud and good; with the wireless aux. speakers it rivals a portable stereo, so I use it for that purpose much of the time, even when off-line.

  • Trouble: e61i won't connect via usb anyway

    First, after buy I made a hard reset erasing all data (*#7370#).
    Some time passed, I installed some programs, syncronized contacts with outlook. After several restarts (turn off, then turn on, eg at night or when I did not need the phone to be on) and some other undefined conditions the phone does not offer to choose to connect as pc suite or usb mass storage when the usb cable is attached. And the pc does not make any reaction on the connected phone - like nothing is happening.
    This is a very serious problem for me since I loose opportunities, time and as a result - money.

    helo..
    try to check the link for some steps
    http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=9​,E=0000000000177854458,K=5095,Sxi=19,Case=Obj(36950)
    Post relates to: Palm TX

  • Why can't my ipod connect via usb?

    I have a 5th generation that won't connect via usb to anything.
    only charges via firewire.
    any ideas?

    iOS: Device not recognized in iTunes for Windows
    or
    iOS: Device not recognized in iTunes for Mac OS X

  • Iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB

    iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB.  I already tried uninstalling and reinstalling iTunes....still nothing.  Any ideas?

    Thank u verrrrrrrrrrry much FoxFifth u save my life thank u.

  • TS3147 connect OS X 10.9.2 macbook air to windows 7 network and share printer (Brother HL-2230) connected via USB to the same network

    Would like to share printer Brother HL-2230 on windows 7 network.  Using Windows 7  "Homegroup" is not an option.
    The printer (HL-2230) is connected via USB to win 7 computer.  Before I updated OS to 10.9.2  it (Macbook air) had  HL-2230 as one of its' priinters and was able to print.  Now a print request hangs on "Hold for authentication".
    I have already reset printer system and re-installed printer x2 - no luck. 
    I have already connected WiFi Epson XP-200 to the Macbook air - runs fine, no problem.
    thx for any help that can lead to the resolution of this problem.
    ~~~~~~~~~~~~~~~~ _/)~~~~~~~~~~~~~~~~~~~~~~~
    KKAOSS

    Thanks greg,
    I am on the road right now at a Mickey D's. Still another 150 miles to go to get home and back to the scene of the crime LOL
    I appreciate your feed back very sincerely.
    I will respond in AM when I can see - I need to get some java and get back on the road to get home by 1AM.  Take care
    best
    KKAOSS

  • My new computer with Windows 8.1 does not recognize my iPhone when connected via USB.

    My new Dell Computer with Windows 8.1 does not recognize my iPhone 5 when connected via USB.  I have reinstalled iTunes to no avail.

    Hey, I may have to if I can't get this one to work!!
    I have tried a different USB to no avail.  Both cables work on my old Dell so I don't believe they are the issue. 
    I uninstalled iTunes as directed by Apple Support and reinstalled.  Apparently, Apple Mobile Device Support is not loading with it because it does not show up in programs. 

  • How can I create a new folder in an external disk that is connected via USB to my Mac?

    How can I create a new folder in an external disk that is connected via USB to my Mac?

    Just like you would create a new folder anywhere. Open the drive's icon from your desktop or the Finder, and click shift-command-N. (Or use the Finder menu if you prefer - File - New Folder).
    If you can't create a folder, your drive may be the wrong format (you can't write to a Windows/NTFS formatted drive, for example). You'll have to back up any files you have on there, and then use Disk Utility to reformat it to Mac Extended (if it will only be used on a Mac) or MS-DOS format (if you want to share it with a PC).
    Matt

  • TS2756 I can no longer connect via USB/service missing

    ..& my iPhone does not show up on the list anymore.  I can still use Wi-Fi, though.  I would like to be able to use the USB connection again.  Resetting the network settings doesn't help.  BTW, I'm using it with my MacBook Pro running 10.7.5 and my iPhone has the latest iOS update as well.
    When I first got the phone, I always used my internet connection via USB, but then it started giving me trouble.  I tried all kinds of suggestions that I found here and it was a real crap shoot -- sometimes it worked, and sometimes not.  Now it just won't work at all.  I recently deleted my iPhone from the list of services thinking that the next time I plugged it in, it would recreated the service.  It did not.  So, I'm still using it as before: just connecting over Wi-Fi (the network is still available, it just doesn't show up in my list of services on the left-hand column under "network").
    Anyone have any suggestions that they know will fix this? 

    Hi DaveX83 and welcome to the discussions.
    A few things to try.
    Press the reset button once on the back of your Extreme and let it restart. Check for proper operation.
    If no help there, keep the ethernet cable connected, and open Airport Utility. Click on Manual Setup near the bottom of the pane. On the next screen click the Airport icon at the upper left of the pane, then click Wireless in the line just below that reads Summary - Time Capsule - Wireless - Access.
    Check to see that your wireless is set up, security set up, passwords, etc. You may need to reconfigure your wireless settings again and update the Extreme to store them and restart.
    Hope this helps.

  • My Internal HD became corrupt and it would not boot up so I installed My osx onto a new HD via usb and then inserted into my macbook pro but it wont boot up. It will only boot up if i connect via usb how can i boot it as an internal HD?

    My Internal HD became corrupt and it would not boot up so I installed My osx onto a new HD via usb and then inserted into my macbook pro but it wont boot up. It will only boot up if i connect via usb how can i boot it as an internal HD?

    Shootist007 wrote:
    If the system won't boot from the new drive the OP bought and install OS X on it it certainly won't boot from the original drives Recovery HD partition.
    Sorry genius.....but if the Recovery disk shows up that means the disk cable isn't bad.  Could be he did have a screwed up HDD and when he put the NEW HDD in (after putting the OS on it via USB) the computer didn't reconize it and therefore didn't boot the OS.  Just maybe right genius?  Don't rush to criticize someone's recommendations until you realize other possibilities.  (I did say "if it does")
    Thank you

  • Epson xp-410 cannot be located after upgrade, connected via usb

    after upgrade to Yosemite, cannot print, looking deeper, message says printer cannot be located.  It is connected via USB.  I am very confused.

    Hi,
    First
    Please Download and run the Printer doctor tool to find and fix your problem
    http://ftp.hp.com/pub/softlib/software12/COL50849/​mp-135113-1/HPPSdr.exe
    If you still have the issue then,
    The detailed description of troubleshooting steps has been given in below link. Click on the windows XP link and follow the steps.
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c02266743&tmp_task=solveCategory&cc=us&dlc=en&lc​...
    Happy Printing
    Click on the "Thumbs up"button on the left to say "Thanks"
    Please mark the post that solves your problem as "Accepted Solution"
    (Although I am employed by HP, I am speaking for myself and not for HP)

  • MSI MEGA 533 with FM Radio won't connect on USB! Brand new from a box !!!

    hello,
    i'm having trouble connecting MSI MEGA 533 with FM Radio, on usb port on my computer.
    I've tried to connect it on USB 2.0 port on laptop and desktop computer, with MS Windows XP SP2 installed, nothing happens. When I start player it works like a charm, i can listen to radio stations, record radio station, and record voice, but when i try to connect it to USB via cable from a box nothing happens.
    I've tried to downgrade it to firmware version from cd, with a standard procedure, hold play button, start download software, connect via usb cable, and the player is not detected by computer.
    PLEASE if there is a way you can help post your reply as soon as possible.
    Thanks

    Hi gagac
    Try uninstalling the current driver on your computer and download the following driver.
    http://rapidshare.de/files/20262928/MS5533.zip.html
    This driver is a backup copy that I uploaded on rapidshare from my Original CD Rom that came with my player & I know that it works with firmware v1.00.06. 
    What I find is unusual is that you got firmware v1.00.06 on your player straight out of the box as it usually comes with v1.00.01 or v1.00.02. 
    If the above driver doesn't work, and since that you have Windows XP, you may want to try upgrading to firmware v2.00.02. NOTE: You will need to also download driver v1.672 from the MSI Website as this is the only driver that works with v2.00.02.   
    CARE: You may want to read the below topic first before upgrading to v2.00.02 as there have been some issues concerning driver v1.672 & v2.00.02.
    https://forum-en.msi.com/index.php?topic=96066.0
    Good Luck. 

  • Desktop 6.0 won't connect via Bluetooth to 8330

    I have already read the posts on this issue.  I have a supported Bluetooth device (ioGear). I am using Windows XP SP3, I have an 8330 Curve. I have tried the software that comes with the device, deleted it and tried the Windows Bluetooth stack, I have tried disabling the firewall (set an exception).  I keep having the same problem.  My computer sees my device, and my device sees the computer. When I am in DM, and try to connect I will get a brief screen on my BB that says connected to computer then it goes away and I get a message in DM that says the connection can't be made.  No matter what I do, I can not connect in DM.  If I delete everything and start all over, I get just as far, but once I get the message in DM that it can not connect it NEVER connects even though the computer and device are paired.  Any thoughts?
    Thank you,
    Baffled

    Hello,
    bazza99 wrote:
    Why did this thread just drop off with no resolution/explanation?  Does no-one from Blackberry/RIM care about their customers?  It's astonishing!
    We shall start there...this site has nothing to do with any formal support from anyone...refer to this information posted at the top of every page on this site:
    bazza99 wrote:
    I know this is much later, but I am experiencing the same problem with my 9810 and DTM.  My PC sees my phone via USB and bluetooth, but it just will NOT link to DTM, which is incredibly frustrating, as it is very important that I am able to sync my diary and contacts to and from my phone.
    I had no problems with this until quite recently - I have no idea what changed things, perhaps an upgrade on the DTM software?
    Here is the list of troubleshooting articles...hopefully something will be useful:
    http://supportforums.blackberry.com/t5/BlackBerry-Desktop-Software/Tips-for-getting-BlackBerry-Deskt...
    KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
    KB28457 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone due to administrative permissions
    KB28458 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone when user account control is enabled
    KB28459 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone when a full version of Roxio® Media Manager is installed 
    KB28456 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone when USB selective suspend setting is enabled
    KB28444 The BlackBerry smartphone is not detected by BlackBerry Desktop Software when connected by USB to a USB hub or a docking station
    KB28443 BlackBerry Desktop Software cannot detect the BlackBerry smartphone when it is connected via USB
    KB02640 Troubleshooting USB connections
    KB15486 Top 10 BlackBerry smartphone and BlackBerry Desktop Manager troubleshooting tips
    KB00125BlackBerry Desktop Software cannot detect the BlackBerry smartphone
    KB11439 BlackBerry Desktop Software does not detect the BlackBerry smartphone when it is connected
    KB00019 No PIN displayed in BlackBerry Desktop Redirector
    KB10938 "USB charging current is insufficient" appears on the BlackBerry smartphone
    KB01451 How to turn on advanced synchronization logging if a wired synchronization fails
    KB19717 The BlackBerry smartphone is not detected as a USB Mass Storage Device when connected to a computer
    KB16310 Media Transfer Protocol and the BlackBerry Storm smartphone
    http://supportforums.blackberry.com/t5/BlackBerry-Desktop-Software/Desktop-Manager-quot-disconnected...
    Also, check that you are using only root USB ports...no hubs (sometimes the front-side ports are hubs...use a rear USB port). And make sure to try disabling USB power management in your system configuration (Device Manager).
    Also check on conflicting software...it has been reported that the software package NTI Shadow&Ninja can cause a conflict; removing them and reinstalling the BB desktop software allows it to install correctly.
    Apologies in advance if this is redundant -- there's no way to be sure if you've already seen and tried these. Also apologies if any are not presently available...RIM takes them up and down at will as they revise things.
    Hopefully something there is helpful!
    Otherwise, perhaps this thread:
    http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/Cleanly-quot-Starting-Over-quot-with-...
    It starts with a process for cleanly starting over, and there is some discussion, and there is also a post (15) with links to older Desktop Software versions, if those are needed. Note that this is not, by any means, guaranteed to work...but it has worked for many to resolve issues they are having.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for

  • Scrollbar doesn't show all text in RichEditableText component ...

    The program is loading text from an external XML-file into a RichEditableText component. However, scrolling an scrollbar does not show all the available text. To me, it looks like the scrollbar is not updated to adopt itself to the new text. Does som

  • Help with html of mobile web built in MUSE

    I have created a website in Adobe Muse, and added a mobile version of the website within Muse. I exported to HTML. I am using Yahoo as my server and when I upload the html files, now when I view the website on my phone, nothing shows up or I get the

  • Arch Linux Handbook

    I am thinking of creating an Arch Linux Handbook much like Gentoo's and Freebsd's excellent ones that go into great detail.  I know there is already a great installation guide, so a couple of questions. Am I just reinventing the wheel, or do you thin

  • Photo Booth: Have lost picture settings, i.e. color, black and white, etc.

    I have somehow lost the ability to choose what type of picture I want. The selections have always seemed as if they were chosen by a not very bright child, but there were at least three settings that were practical and useful. Now I only have black a

  • Looking for Coldfusion Classes in-person

    I am looking for Coldfusion classes in Springfield, Massachusetts.  Any help?