Tx1000 display output display to projector

need help frenzzz. i have tx1000 and i upgrade to windows7. everthing goes alright.
but when i wanna presentation in meeting. cannot connect to projector. not show at all.
only show in laptop screen.. any sugestion??
thx before

The Device manager screenshot is not to clear., can you post it again...plus can i get the exact model number of the notebook?
Although I am an HP employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

Similar Messages

  • Looking for iPad App for displaying photos via a projector

    I'm looking for an App that will allow me to display photos using a projector yet permit manual advancing through the slides.
    The included Photo app only works with the projector when in slideshow mode. As soon as I try to manually advance a photo the projector output stops.
    I've seen references to Keynote but I'd rather not have to import 'x' number of photos into Keynote to be able to display them. I'm not convinced Keynote will do what I want anyway.
    There's got to be an app out there somewhere that does this. Isn't there?
    Thanks.

    Locking the iPad so that a user can't exit an app isn't possible for any developer to implement, since the developer kit doesn't provide that sort of access to the low-level routines in iOS. The only way to lock into a single app is to use a case/frame that covers the Home button (and turn off the gesture support in the settings in iOS 5).  A number of companies make kiosk mounts for this purpose.
    Regards.

  • T520 Display Output

    We're currently looking for a new Demonstration Laptop, and the T520 and W520 look like being contenders. Ok they're not as portable as some, but that isn't the main factor for us. Our primary considerations are performance and Display Output.
    We require a machine that is capable of outputting at SXGA (1280x1024), which basically limits us to higher-end displays. Could anyone confirm if this setting is available on the T520/W520 1920x1080?
    Thanks in advance
    Solved!
    Go to Solution.

    I don't suppose the Extend option is a viable option? PowerPoint has a presentation mode where it presents you with your slide + notes on the laptop screen while the projector is all slide.
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

  • Fields missing in ALV grid display output

    Hello  Friends,
    I have done customer enhancement to VF04 tcode and i have added 2 new additional fields to the existing output.The program is working fine and its displaying the 2 new additional fields in the output display in development server.
    But when i transported the program to Q server and i have observed that the 2 new additonal fields are not displayed in the output display but when I  am selecting  'choose detail' push button on application tool bar it's showing the 2 new additional fields.In development server in the output 40 fields are displayed but in Q server only 9 fields are displayed.
    Could you please help me regarding this.
    Thanks in advance,
    Arvind.

    register the enhancementy to the project in Q server .. might be it is not transferred

  • To Display Output in Grid ALV with change of some field display total with

    Hi Masters,
    I m working on ALV in which  i have to display output with the following format.
    Header
    "Some String"                                                             date/time                                                                               
    User:XYZ01       page 1 
    Line
    1st field    2nd    3rd     4th       5th   6th    7th   8th   9th  10th field
    x               y       z        A        B     C       D     E      F       G
    BLANK..............................................................................                            
                          "total 3rd+4TH"           P        Q     R      S        T       
    same thing for every change of 4th field .
    So the problem is with inserting the line with string "Total of 3rd+4th" in the output .
    Can Anyone help me out?
    Thanks ,
    Varlani Amit

    Hi,
    Use control-break statement ON-CHANGE for the 4th field, and do the changes.
    regards,
    sri

  • Help on output Display

    Help on output Display
    Thanks in Advance
    ID ROUTE STRT_NAME BEGIN_DESCRIPTION END_DESCRIPTION OVERLAP BEG_MP END_MP Hierarchy
    100899 CR ELM AVE EXT FUERA BUSH RD ELM AVE 1551 0 0.46 3
    100899 CR ELM AVE ELM AVE RT 910A 1551 0.46 0.95 3
    100899 CR ELM AVE ELM AVE DELMAR BYPASS 1551 0.46 0.83 3
    100290 NY32 ELM AVE EXT RT 910A FEURA BUSH RD ELM AVE 1551 16.85 17.31 1
    100290 NY32 ELM AVE ELM AVE DELMAR BYPASS 1551 17.31 17.68 1
    My output will be Based on Hierarchy Max valuewhich is "3"
    ID = Hierarchy Max value 3 =(100899)
    ROUTE = Hierarchy Min Value which is "NY32"
    STRT NAME = Hierarchy Max value (3) and Min of Beg_MP of Hierarchy Max value(3) = ELM AVE EXT
    Begin Description = Hierarchy Max value (3) and Min of Beg_MP (0) of Hierarchy Max value(3) = FUERA BUSH RD
    End_description =Hierarchy Max value (3) and Max of Beg_MP (0.95) of Hierarchy Max value(3) = RT 910A
    Beg_MP = Hierarchy Max value (3) and Min of Beg_MP (0) of Hierarchy Max value(3) =0
    end_mp = Hierarchy Max value (3) and Max of Beg_MP (0.95) of Hierarchy Max value(3) = 0.95
    ID ROUTE STRT_NAME BEGIN_DESCRIPTION END_DESCRIPTION BEG_MP END_MP
    100899 NY32 ELM AVE EXT FUERA BUSH RD RT 910A 0 0.95

    CREATE TABLE TABLE_query(ID NUMBER,ROUTE VARCHAR2(30),STR_NAME VARCHAR2(30), BEGIN_DESCRIPTION VARCHAR2(300),END_DESCRIPTION VARCHAR2(300),BEG_MP NUMBER,END_MP NUMBER,HIERARCHY NUMBER,overlap number);
    INSERT INTO TABLE_query(ID ,ROUTE,STR_NAME, BEGIN_DESCRIPTION,END_DESCRIPTION,BEG_MP,END_MP ,HIERARCHY,overlap)
    values(100899,'CR','ELM AVE EXT','FUERA BUSH RD','ELM AVE',0,0.46,3,1551);
    INSERT INTO TABLE_query(ID ,ROUTE,STR_NAME, BEGIN_DESCRIPTION,END_DESCRIPTION,BEG_MP,END_MP ,HIERARCHY,overlap)
    values(100899,'CR','ELM AVE','ELM AVE','DELMAR BYPASS',0.46,0.95,3,1551);
    INSERT INTO TABLE_query(ID ,ROUTE,STR_NAME, BEGIN_DESCRIPTION,END_DESCRIPTION,BEG_MP,END_MP ,HIERARCHY,overlap)
    values(100899,'CR','ELM AVE','ELM AVE','DELMAR BYPASS',0.46,0.83,3,1551);
    INSERT INTO TABLE_query(ID ,ROUTE,STR_NAME, BEGIN_DESCRIPTION,END_DESCRIPTION,BEG_MP,END_MP ,HIERARCHY,overlap)
    values(100290,'NY32','ELM AVE EXT','RT 910A FEURA BUSH RD','ELM AVE',16.85,17.31,1,1551);
    INSERT INTO TABLE_query(ID ,ROUTE,STR_NAME, BEGIN_DESCRIPTION,END_DESCRIPTION,BEG_MP,END_MP ,HIERARCHY,overlap)
    values(100290,'NY32','ELM AVE','ELM AVE','DELMAR BYPASS',17.31,17.68,1,1551);
    ID     ROUTE     STR_NAME     BEGIN_DESCRIPTION     END_DESCRIPTION     BEG_MP     END_MP     HIERARCHY     OVERLAP
    100899     CR     ELM AVE EXT     FUERA BUSH RD     ELM AVE     0     0.46     3     1551
    100899     CR     ELM AVE     ELM AVE     DELMAR BYPASS     0.46     0.95     3     1551
    100899     CR     ELM AVE     ELM AVE     DELMAR BYPASS     0.46     0.83     3     1551
    100290     NY32     ELM AVE EXT     RT 910A FEURA BUSH RD     ELM AVE     16.85     17.31     1     1551
    100290     NY32     ELM AVE     ELM AVE     DELMAR BYPASS     17.31     17.68     1     1551
    My output will be Based on Hierarchy Max valuewhich is "3"                         
    ID = Hierarchy Max value 3 =(100899)                                        
    ROUTE = Hierarchy Min Value which is "NY32"                                        
    STRT NAME = Hierarchy Max value (3) and Min of Beg_MP of Hierarchy Max value(3) = ELM AVE EXT                                        
    Begin Description = Hierarchy Max value (3) and Min of Beg_MP (0) of Hierarchy Max value(3) = FUERA BUSH RD                                        
    End_description =Hierarchy Max value (3) and Max of Beg_MP (0.95) of Hierarchy Max value(3) = DELMAR BYPASS                                        
    Beg_MP = Hierarchy Max value (3) and Min of Beg_MP (0) of Hierarchy Max value(3) =0                                        
    end_mp = Hierarchy Max value (3) and Max of Beg_MP (0.95) of Hierarchy Max value(3) = 0.95                                        
    ID     ROUTE     STRT_NAME     BEGIN_DESCRIPTION     END_DESCRIPTION     BEG_MP     END_MP          
    100899     NY32     ELM AVE EXT     FUERA BUSH RD     DELMAR BYPASS     0     0.95          
    I figured out how to get id,beg_mp and end_mp
    Can anyone help me getting the rest of data coumns please
    --route,str_name,begin_description,end_description,beg_mp,end_mp,hierarchy,
    select distinct max(id) keep (dense_rank last order by hierarchy) over (partition by overlap) ,
    min(beg_mp) keep (dense_rank last order by hierarchy) over (partition by overlap) beg_mp,
         max(end_mp) keep (dense_rank last order by hierarchy) over (partition by overlap) end_mp                              
    from table_query

  • WBS element field to Depreciation Simulation Report  output display

    Hi SAP Experts,
    We need to Add the WBS element field to Depreciation Simulation Report  output display (S_ALR_87012936)
    Could please give your valuable inputs
    Thanks
    Hari Pothula

    HI Javed,
    We have capitalized with WBS element but not displaying in simulation report.
    All configurations done in in ACSET and activation Account assignment objects
    Thanks
    Hari

  • How to redirect the output display on Ultra 5 box.

    Hello,
    Good day to you.
    I have issues with redirecting display output to my console server (which is configured with cyclades switch) on a newly installed solaris 10, Ultra 5 box.
    I could access the output display on the monitor when I connect it directly to the serial port. But I also have my parallel port connected to cyclades switch which is primarily being used for accessing multiple servers thro' one single console server.
    When I try to access my ultra 5 box thro' console server, the display not getting redirected over there..I did checked the port from cyclades switch front, it did work well with other machines.
    Looks like some work needs to be done at Ultra 5 box level so that the parallel port can send output signals to the respective port on cyclades switch and consequently to the console server.
    Any thoughts ??
    Thanks.

    Hi,
    Good day to you.
    Apologize for quoting "Parallel" port. It is a in-built 25pin serial connector placed next to regular 15 pin serial port.
    Just to make a point here, this 25 pin serial connector has an external converter attached with other side having RJ45 jack.
    CAT5 cable connected between switch port to this RJ45 jack.
    I did tested this converter with another machine and could able to access the display on my console server. So it seems to be the connectivity from serial port to switch port works fine.
    Adding to that, this ultra 5 box with the current connectivity set up was working fine until I rebuild this machine. I was very well accessing this box thro my console server. There was no changes done except rebuilding the operating system.
    I think some work needs to be done at the ultra 5 box level to get this 25pin serial connector to act.
    Thanks.

  • How to Download displayed output to Excel Using Bsp Application

    Hi Experts,
    please give me some idea because I am New In BSP.
    How to Download displayed output to Excel Using Bsp Application.
    If any sample code please do send me.
    In my condition I am getting data in  2-3 table view formats on one page and i want download that in Excel.
    please help me.
    Regards & Thanks,
    Yogesh

    Hi,
    This is more a question for the BSP forum.
    Anyway, as such it's realy easy since you can use HTML in order to import to Excel. All you need to do is add
    runtime->server->response->set_header_field( name = 'Contnet-Type'
    value = 'application/vnd.ms-excel' ).
    runtime->server->response->delete_header_field( name = 'Cache-Control' ).
    runtime->server->response->delete_header_field( name = 'Expires' ).
    runtime->server->response->delete_header_field( name = 'Pragma' ).
    Also check threads like
    Download BSP data into Excel
    export bsp-table to excel
    Export BSP Table to Excel
    Eddy
    PS. Reward useful answers and earn points yourself

  • Problem In report output display when i run in the background

    Hi,
    In a classical report i am printing around 17 fields  the width of the report out put is around 800 characters.
    If i run  the report in the  fore ground it running perfectly. But the thing is when i give large selection is it GETTING ' TIMED OUT ' as it is running more than an Hour.
    so i wanted to run it in the back ground to avoid TIME OUT problems.
    But when i run in the backgroud   i am not getting  full  out put in the SPOOL request(SIZE of the report output may causing the problem) .
    Pls come up with some solutions
    Thanks in advance

    Try increasing the spool length..
    Refer this link for doing so.
    Spool List output display > 255 char when the rpt is run in Background
    Thanks
    mahesh

  • Change font size by display output

    Dear all,
    its possible to change the size format of the output display.
    I have this situation:
    PRINT-CONTROL SIZE 3 FONT 5.
      Write: / 'TEST 1:',ls_bkpf-belnr.
      PRINT-CONTROL SIZE 10 FONT 5.
      Write: / 'TEST 2:',ls_bkpf-belnr.
    in the display I will see:
    Heading 4:  TEST 1.
    Heading 1:  TEST 2.
    is this possible ?
    best regards

    no answer a long time

  • For output display report is final_internal table or structure in wd ABAP?

    Hi all,
    for output display report is final_internal table or structure in wd ABAP?
    in wd java output display report -.> CALLING rfc and that RFC OUTPUT table
    finally in internal table is assigned to STRUCTURE .Same procdure?
    Thanks,
    RAMA

    Dear Madhu,
    thanks for guidence!
    its showing popup tht this BADI ( ME_CHANGE_OUTTAB_CUS ) is only use for "SAP Internal  use".
    Regards,
    Praphull

  • Plz help me, no display output during boot up of 715 workstation

    now i have a HP 715 model workstation,today, conneted hp monitor..but can't display output during system boot up so i tried  solve this problem,1)changed battery2)removed HDD after reboot system and press ESC key    => now can't use Keyboard..not working key board3)Press Tap key.. Just i think, this problem is system configulation problem. not monitor problem..so i found internet website..but now i can not change configulation who know this problem.plz help me  

    one question in html submit the reslut stored jdbc that value shows barchartAll your base are belong to us!
    You know, while I understand that English isn't your first language (neither is it mine) and there's no need to be perfect: if you can't write an understandable post yourself, consider asking someone to do it for you.

  • Display output on LED TV from DisplayPort on zbook 15

    Hi,
    I have a notebook zbook 15 Product D5H42AV.
    On this laptop I have a DisplayPort output and a Thunderbolt output.
    I have bought on the market an adapter (not from HP) from DisplayPort to HDMI.
    I cannot get the output displayed on my LED TV (full HD).
    Could it be that the adapter supports only DisplayPort 1.1 and not 1.2?
    If I want to see the screen on TV, shall I use the a DisplayPort adapter or Thunderbolt adapter?
    Is there any way to troubleshoot why I cannot display the output on TV from my laptop?
    This question was solved.
    View Solution.

    Hi Provost,
    thank you for your feedback. I have tried but still not working.
    According to this document:
    http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA5-2657ENW
    it seems that I should connect the HDMI to DisplayPort:
    *DisplayPort connector supports a DisplayPort display, a HDMI display with an DP-to-HDMI dongle, a VGA display with a DP-to-VGA dongle, or a DVI display with a DP-to-DVI dongle.
    I have a Samsung TV Series 6 with 4 different HDMI input:
    HDMI1 (STB)
    HDMI2 (ARC)
    HDMI3
    HDMI4 (DVI)
    I have tried with all of them unsuccessfully. I'm afraid that my DP-to-HDMI dongle that I bought on a local internet shop and it's made in China is somehow not fully compatible with my zbook.
    Maybe I should buy the original one from HP.
    When I connect the laptop to TV I saw that somehow the TV see that the port is connected but it says "No Signal".
    Also pressing F4 and checking with the Screen Resolution windows (in Windows 7) shows the second display as VGA. So it looks it does not detect the DisplayPort.
    Is it possible that the port must be enabled (bios or Windows setting) or that I miss some drivers?
    Checking on the Internet I found that there are some adapter that can connect also to the thunderbolt port:
    https://m.cdw.com/shop/products/StarTech.com-Mini-DisplayPort-to-HDMI-Video-Adapter-Converter/197508...
    The product is described as compatible with zbook 15
    However the official HP site sell a dongle only for the DisplayPort:
    http://shopping1.hp.com/is-bin/INTERSHOP.enfinity/WFS/WW-USSMBPublicStore-Site/en_US/-/USD/ViewProdu...
    The adapter I'm using can be seen in this page:
    http://media.extron.com/download/files/userman/68-1887-01_B.pdf
    It's the "DisplayPort Male to HDMIF Active Adapter" (top right code 26-655-01).
    I'm a bit confused now. I don't know if I have to buy a different adapter or if there is a way to troubleshoot my problem and see if the DisplayPort is enabled and working on my laptop.
    Regards.
    Alberto

  • Turn off external display output?

    I've bought a nice big LCD TV mainly for consoles. Because I have it next to my iMac i've also connected that to the TV using a mini-dvi adapter and a dvi-hdmi cable.
    It works great but I only want to use it for playing downloaded video and the like on the big tv.
    When I'm not using it I want my iMac to free up the resources it must be using to achieve screen spanning but I cannot figure out a way to tell the iMac to disable external display output.
    I've tried display mirroring figuring that it won't be eating up video RAM, but it causes page tearing on my mac when dragging windows around for example.
    Even when the TV is unplugged from the mains the mac seems to be outputting to the dvi out, the only way to stop it is the yank the mini-dvi connecter from the back.
    Are there any hacks or utilities that can manually turn dvi support on and off?

    Hello Mark
    I'm using a 27" flat screen TV, mini DVI and 12' S-Video cable.
    Mostly I watch DVD movies on that Display while working at the iMac's 17" it's also great for iPhoto Slideshows and PowerPoint.
    Not to worry the TV supports it's own display and all you are doing is sending a signal to it's video card. Just turn it off or change the channel.
    I tend to stay away from mirroring for the same reasons, but also because the TV's across the room.
    Again not to worry the TV supports it's own display and all you are doing is sending a signal to it's video card. Just leave it connected up to prevent damage to DVI port, Adapter and cable. "yank not"
    Just be sure to gather up all your windows back to the iMac Display befor shutting off or changing the channel.
    Dennis
    17" iMac Intel Core Duo 1.5GB Ram   Mac OS X (10.4.9)   Maxtor 300GB FireWire Creative Inspire 2.1 2G Nano

Maybe you are looking for