TX1000 Touchscreen not working and driver possibly missing

The touchscreen on my HP Pavillion TX1000 has not been working for a quite a while and now I want to fix it.
I've read previously on this forum that other people have managed to solve this problem by updating/rolling back the driver called HX2LP.
I have looked in the Device Manager and the driver is not there so I cannot roll it back or update it. I do not know much about drivers etc so I do not know what I should do, can I download the driver? Im not sure how these things work or even if you can download a driver.
Below is the post i read about how a similar issue was solved.
"I was able to get them working again by rolling back the HX2LP driver in device manager. The device driver rolls back to a Microsoft driver, not Cypress. The optional Cypress windows update was published on 2/25/2009."
Thank you in advance,
Lawrence

  I just got off the phone with a new case manager named Jamie 1-877-917-4380 ext 93 regarding new case number 7501359724, and of course just what I expected he would say, HP has no known issue with the tx series and no issue with the Nvidia 6150 chip.  He said that its just a coincidence that 1000's and 1000's of owners have experienced overheating motherboards.  That despite the same symptoms of other hp laptops and their recall proceding a huge lawsuit with Nvidia admitting they had sold hp defective chips, the tx/ 6150 nvidia was not one of the defective chips.  After reading the lawsuit details I found that Nvidia never released a list of the exact defective chips just that there were some, and then settled with hp.  Hp for some reason or another made a list of the so called defective ones and left many of the additional defective ones including the tx series/ Nvidia 6 series chips off the list.  Maybe there are not as many of us that own it, so as a business move they felt they could get away with this, or maybe because the failure typically hits a month or two after warranty expires.  I even looked up the chip by itself and found that the same Nvidia 6150 chip was used in certain Dell notebooks and had an issued recall relating to its defect.  Yet Jamie from Hp clearly stated that there is no known defect and that I would need to pay 400.00 USD and get the mother board replaced. I told him that I wasn't going to do that, why would I spend 400 dollars to have a new defective mother board intsalled to fail again.  He assured me that it wouldn't be an issue because the new mother boards have a different set of chips due to the issue with the old chip.  What is that about?  Does he think I am stupid, they say there is no defect in that chip, so they wont take responsability but they admit there is an issue with the chip, what is the difference?  They change the word defect with issue and that excuses them from any liability in providing a product capable of delivering expectations and quality of its class.  I personally wont settle for this. I wont settle for less than a refund or a new equall value notebook free from defect with an extended warranty.  To all of you others with this model of notebook i suggest you do the same, don't give up on your right to defend your hard earned money.  Look up Nvidia 6 series chips and you will find many companies that have disclosed its defect and taken responsability to their product owners.  Hp needs to do the same. Shame on HP  I had to edit this because they keep deleting my posts to cover up there secret, you can try and follow the trouble shooting tips, but it wont work, your monitor is not broken, the graphics card has burned up and is killing your mother board.  A company invested a lot of money only to realize they can either lose a lot more money or they can brush it under the rug at the expense of their customers, and so they try to sustain profitability, by hiding the truth.  I suggest you buy a msi netbook, it has no frills but I promiss it will last, msi knows how to make a strong motherboard and stand by their products, no use in buying a fancy computer when it will only tease you with 13mons of life.  I am sorry that myself and all of you put your hard money and trust into a product that was probably knowingly doomed before it was even sold to us. Just remember that in this economy even a large company that you think you can trust can't be trusted, MONEY trumps the consumer!!

Similar Messages

  • I bought Hp 15 g207ax, 2 out of 3 usb not working, and all drivers missing, no ethernet or no wifi

    i bought a new Hp 15 G207AX.
    issue 1 - 2 out of 3 usb not working, 1 usb 3.0 and 1 usb2.0 not working. 1 usb 2.0 is working properly
    question 1- is it because of faulty laptop or driver issue? also, if it is driver issue, then why 1 usb 2.0 is working?
    issue 2 - All Drivers are missing.
    question 2 - where can i find all the drivers?
    issue 3 - no ethernet and no wifi connecting
    question 3 - is there a driver for ethernet too? can you tell me what drivers i need to install for ethernet or wifi. because without those, i cant do anything?
    looking for your immediate reply. as if in 1st question, if usb ports are defective and laptop is faulty, i will ask for a replacement or refund.

    Likely all of these issues would be fixed with the chipset driver.
    Did you look at the solutions listed in that other forum post I linked to above?
    ...an HP employee just trying to help where I can, but not speaking on behalf of HP.

  • Voice message indicator not working and I am missing calls/messages that I didn't even know I had...OS 8.1.2

    Within the past week or two, I have missed a few phone calls.  Previously, the missed call and voice message indicator number would appear to alert me--now it does not.  Do I REALLY need to constantly call my own voice mail to see if I have a message?  Related, my message list is not appearing, either.  Voice message asks me to submit my password each time and this NEVER happened before.  iPhone 5S, OS 8.1.2

    Hi and welcome to the forums!
    Ringtones:
    Highlight the ringtone/s that won't play, menu key properties, see what format it's in, and the size of the file.
    If it didn't load correctly it probably is  some thing like o-4kb. Basically empty. Second look at the file type
     (.mp3 .mp4 etc). Check the chart below to make sure it's compatible with the BB. You can always highlight the item
    and delete it.
    Screen,
    Pull the battery out while the phone is still ON, leave it for a minute,
    Replace and let the device reboot 1-3 minutes. See if the message indicator returns.
    Here is a list of compatible audio types:
    http://www.blackberry.com/btsc/dynamickc.do?externalId=KB05419&sliceId=SAL_Public&command=show&forwa...
    Please let me know about the screen indicator and the ringtone.
    Thanks!
    I this answers your questions, please resolve the post by placing the green check in the post that answered your questions.
    Thanks
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • I just fix my macbook air because it was kernel panic. They changed the hard drive. I could not back up with Time Machine, because it did not work and I had over Adobe creative suite 5 design premium student. But I finished my studies last year and I'd li

    I just fix my macbook air because it was kernel panic. They changed the hard drive. I could not back up with Time Machine, because it did not work and I had over Adobe creative suite 5 design premium student. But I finished my studies last year and I'd like to know how to get the serial number for me to reinstall Adobe creative suite 5 design premium when I am no longer study because I would still like the used? It is not fair if I do anymore because I really need.

    You can download Creative Suite 5 here:
    Other downloads
    To deal with the issue of the serial number and using it again, you'll have to use Web Chat. Here's a link:
    Adobe ID, sign in, and account help
    See the bottom of the page for a link

  • I have a macbook pro from 2006, my internal cd drive is not working and i'm trying to install factory definitions from an external cd drive. the problem is that when i press c nothing happens only appears an interrogation folder.

    i have a macbook pro from 2006, my internal cd drive is not working and i'm trying to install factory definitions from an external cd drive. the problem is that when i press c nothing happens only appears an interrogation folder. or sometimes appears the apple logo and than back again to the interrogation folder... Help please!!!!

    mcbsousa wrote:
    hm... Is there any chance of making the bootable usb file and send it by dropbox or something like that? than put it in a pen drive and connect to the mac??
    Sending by Dropbox where, To who, to what computer? As your does not start up.
    You need to take at least the OS disc to a work Mac computer and create DMG from the OS install disc then restore that DMG to USB thumb drive. Then you can boot the computer from that thumb drive and install the OS. That is if your hard drive is functioning correctly.
    Then you can use the App disc in the external CD/DVD drive to load up all the included Applications that come with your version of OS X.

  • HT1688 My camera is not working, and I have tried all the ways possible to get it working, but no luck.  What do I do?

    My camera is not working, and I have tried all the ways possible to get it working, but no luck.  What do I do?

    Having tried all the ways possible to get it working, contact your retailer again and politely tell them they did not yet satisfactorily resolve your trouble.  Their Apple-Authorized Service Provider will be able to repair it.
    Message was edited by: EZ Jim

  • HT201406 I cant scroll my iphone or the touchscreen is not working and the invert color is on i wanted to off it i cant scroll it down  what will i do i need some help

    I cant scroll my iphone or the touchscreen is not working and the invert color is on i wanted to off it i cant scroll it down  what will i do i need some help

    Did you try recovery mode? iOS: Unable to update or restore
    Or How to put iPod touch / iPhone into DFU mode

  • Personal hotspot missing and music volume not working and lots of other problem after updated 4s to ios8 ? Apple disappointed this time badly.

    Personal hotspot missing and music volume not working and lots of other problem after updated 4s to ios8 ? Apple disappointed this time badly.

    GO to Setting > Cellar Data > VPN Settings > Add any user and password under Personal Hotspot, then you will see it's activated again as usual

  • I have purchase iphone4 from someone,it is not factory unlock ,how can i get it factory unlock,its safari not working and its not showing drive on my computer

    i have purchase iphone4 from gray market,it is not factory unlock,how can i get it factory unlock,
    its safari not working and it is not showing drive in my computer.

    iPhones are sold in carrier-locked and unlocked versions. If the phone has a carrier lock on it, you must contact the carrier to have it removed (you probably need to bring the phone to the carrier for the process). If you don't know the carrier, you won't be able to get it unlocked. US carriers will not remove the carrier lock and it cannot be removed.
    How is Safari behaving that makes you say that Safari is not working? The lock status of the phone won't affect Safari, except that if the phone is locked and you aren't using the carrier (and SIM provided by the carrier) to which it is locked, then you can't use the phone or 3G service, only Wi-Fi.
    The iPhone should not appear as a drive on your computer, so there's no error there.

  • My GoFlexPro for Mac external drive will not work and freeze Finder after I switched to Mountain Lion. Anyone same trouble?

    My GoFlexPro for Mac external drive will not work and freezes Finder after I switched to Mountain Lion. Anyone same trouble?

    Search this site for many reports of problems with GoFlex drives.

  • Elite Pro, CMSS-3D not working and other issues after driver update

    DElite Pro, CMSS-3D not working and other issues after driver update <font face="arial,helvetica,sans-serif" size="4">Elite Pro CMSS-3D control (on I/O console)no longer controls CMSS-3D.
    The only time it works is if the original drivers are installed from the installation CD.
    ANY other drivers stop the control on the Elite Pro I/O console from having any effect on CMSS-3D.
    Also at one time when I cotrolled volume, CMSS-3D(original drivers), EAX and Crystalizer from the Elite Pro I/O controls then I had on screen display of said control that was being moved(on I/O console).
    Now regardless of what drivers are installed, there?are no longer any on screen indicators.
    The indicators looked like the ones that show when using the remote controller.
    Anyone have any ideas?

    Hello friends, if any body have problem with "Creative Sound Blaster X-Fi series Driver 2.8.003" then you can download previews "Creative Sound Blaster X-Fi series Driver 2.8.0008" from above direct Links :
    http://rapidshare.com/files/252388832/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
    http://rapidshare.com/files/25239047/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part02.rar
    http://rapidshare.com/files/252397989/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part03.rar
    http://rapidshare.com/files/252397990/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part04.rar
    http://rapidshare.com/files/25239799/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part05.rar
    http://rapidshare.com/files/25240785/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part06.rar
    http://rapidshare.com/files/25240787/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part07.rar
    http://rapidshare.com/files/252405003/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part08.rar
    http://rapidshare.com/files/252408540/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part09.rar
    http://rapidshare.com/files/252408542/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
    http://rapidshare.com/files/2524409/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part.rar
    http://rapidshare.com/files/25244020/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part2.rar
    http://rapidshare.com/files/2524402/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part3.rar
    http://rapidshare.com/files/25244022/[email protected]7.254.6.0

  • My finger print reader is not working and this unknown driver is not installing HP4230s

    my finger print reader is not working and i have tried the downloads available on hp website and many other but its not showing in the area where we configure the passwords for the pc
    and my other problem is as i have updated my pc to win 8 or 8.1 this device is not getting installed the hardware id is : ACPI\VEN_HPQ&DEV_0004
    kindly solve these problems as i really want to use this finger print and i dont know what is this unknown device all about

    my hp envy mp notebook fingerprint is not working, give the software for it !

  • Touchscreen not working - new 11-010dx x360PC

    Hi, I have a fairly new x360PC. I have previously posted here that I could not get Miracast to work at all. I never got a solution, but decided to keep the lapt
    op anyway.
    However, I now have a new problem. The touchscreen does not work most of the time. I have been able to get it working sometimes, but now it appears to have stopped completely.
    I have installed all of the latest drivers from the HP website, including the latest BIOS, Intel HD Graphics, Qualcomm Atheros driver,GPIO controller, I2C Driver,  etc.
    In "Device Manager", "Human Interface Devices" I have 2 entries called "I2C HID Device". One of these entries has the dreaded warning triangle, and in "Properties" it says that "This device cannot start (Code 10)" On the next line it says "A request for the HID descriptor failed". The other entry looks fine. I have tried deleting either/both of these, as well as the "I2C controller" in "Syetem Devices". This seemed to work a few times, but no longer - the entries come back just as they were.
    When I look at "Control Panel", "System", under "Pen and Touch", it states that "No Pen or Touch input is available for this display"
    I previously tries several system restores, and comple re-sets to factory mode. While some cured the problem tempoarily, it continues to re-cur.
    Any help or suggestions would be fratefully accepted.
    Thanks
    Paddy

    Hello PaddyM,
    Thanks for posting on the HP Forums!
    I understand the touch screen is not working and a code 10 error persists. To begin troubleshooting, please complete all of the suggestions in this Microsoft document: Fix: "This device cannot start" Code 10 error in Device Manager in Windows
    When you load the page, it prompts you to run Microsoft Fix it. I would run it because it may automatically resolve the issue. If not, just try out the suggestions.
    If that doesn't work, then  I would like you to reinstall the operating system. It will clear up any software conflicts and allow you to start fresh. If this doesn't work, then a hardware failure will become the only possibility.
    First, please ensure you backup your files. Here is information on how to do this: Backing Up Your Files (Windows 8)
    Once this is done, it is safe to reinstall the operating system. Performing an HP System Recovery (Windows 8)
    If the same situation occurs, the computer likely has faulty hardware. At that point, please contact HP phone support. You can utilize this website to learn how to contact HP appropriately, based on your region: Contact HP Worldwide
    Please let me know your results. Thanks!
    Mario
    I worked on behalf of HP.

  • HT1923 It did not work and I am still getting the error message

    It did not work and I am still getting the error message" iTunes was not properly installed. If you wish to import or burn CDs you need to reinstall iTunes.

    I want to sync my iPad Mini with Outlook 2007. I installed iTunes and got the error message below:
    iTunes was not properly installed. If you wish to import or burn CDs you will need to reinstall i Tunes.
    So I tried to fix the problem and followed the instructions on the article below.
    iTunes for Windows: "Registry settings" warning when opening iTunes at http://support.apple.com/kb/ts3299
    That did not work and now my CD Drive is missing so I followed the instructions on the article below.
    iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install at http://support.apple.com/kb/TS2308
    So now I have a missing CD Drive and iTunes till does not work. Can someone please help!

  • HT204150 Following problem: I have around 600 contacts on my iphone and Ipad and would like to sync with contact list on my mac book air but its not working and whatever I do I get stuck on the 44 contacts I have on my mac  contact-list. Please Help!!!! 

    ollowing problem: I have around 600 contacts on my iphone and Ipad and would like to sync with contact list on my mac book air but its not working and whatever I do I get stuck on the 44 contacts I have on my mac  contact-list. Please Help!!!!  thanks

    First, be sure that the contacts on the devices are in the "icloud" section and not the "On my iPhone" (or iPad) section of the contact listings/groups.
    Missing contacts:
    Here's a test to perform - using a computer's browser, log into icloud.com and go to the Contacts page.  If most of them are gone, then they are gone. 
    If they show up, then the problem is that your device is not connecting to the Contacts database on icloud. 
    On the device, go to Settings>icloud.  Be sure icloud is on and using the right ID.  If not, scroll to the bottom of the page and tap Delete Account - this just disconnects the device from that account, no data is lost.  Then log back in using the correct ID.  ALSO - be sure the Contacts are turned on (on the same screen).
    Note:  Contacts are not part of an iCloud backup, since they are part of contacts database on iCloud's servers.   So performing a restore will not help.
    Contacts are gone from icloud.com.
    Then they have been deleted.  There are many reasons for this.  One possibility is that someone else is using the same iCloud account (family member, etc.) and they deleted contacts, thinking they did want them on THEIR device.  How to get them back?  Unfortunately, an iCloud backup does not include any of the sync databases, like contacts, notes, calendars, reminders, etc. because the data is already stored in these databases.  Your only hope for restoring the data is if you had that data on a computer (like a mac's Contacts, Calendars, etc.) and that data was backed up using whatever backup software you typically use (e.g. Time Machine on a mac).  Just restore the data files back to the computer.  Other than that, I'm afraid the data is gone.

Maybe you are looking for

  • Time Capsule PC Problem

    Help-I have a time capsule which I use to create a wireless network for my home which is located on the second floor. I have trouble connecting a windows vista PC to my network-It doesn't "See" my network as an option in many cases. Any suggestions?

  • Truncate table related questions

    Hi Folks, Environment: 10g Rel 2 I am trying to prove the following two points by way of experimentation a, The truncate table operation will reset the high water mark (HWM) to the first usable data block in the table segment # Take a HWM snap shot b

  • How can i recover skype account without hotmail co...

    Hi, i wanted to ask about my skype account.I guess before 5-6 years ago i have opened hotmail account called " [Mod edit: Please do not include personal/private information when making a public post. Thanks!] ". So this account doesnt exist anymore c

  • Trying to create a QR code?

    What is the easiest way to get a link inside the app store to a specific app so that I can create a QR code?

  • Highly Urgent

    Hi Gurus, Developed web template in WAD 3.5 now need to publish within detail navigation panel on the portal. So that user click on the web template link and it opens up in the portal and also that web template brings selection screen on execution ho