TX1410US and Windows 7 - How To Install Drivers?

How do I install the drivers for the following components of a Pavilion TX1410US notebook under Windows 7:
- Wi-fi connection hardware
- The buttons on the screen (incl. the media keys there - because those aren't responding)

Hi,
Use Vista drivers for your specific model. Most of them will work. You may find them here.
First thing which you should install is chipset driver:
NVIDIA nForce Chipset/Network Drivers here
Important note!
You will need to reboot your system after installing chipset driver.
It's recommended to install all Windows Updates.
Why? AMD machines with nVidia graphic cards are very quickly overheated after installing Windows 7. This simple solution will fix this problem. You will need to install as quick as possible graphic driver. Which is available through Windows Update too.
Resource:
Install Windows updates
How to find graphic driver?
   1.Open Windows Update by clicking the Start button , clicking ' All Programs ', and then clicking ' Windows Update '.
   2.In the left pane, click ' Check for updates ' , and then wait while Windows looks for the latest updates for your computer.
   3.Select the ' Optional Updates ' and install from there only driver for Your graphic card.
Some more up to date drivers / software for Windows 7:
HP QuickPlay here (ver 3.7 v.6112 for 32/64 bit Win7)
Notes:
It must be installed before HP Quick Launch Buttons.
You've installed this software and it hangs while using?
            Uninstall your current HP QUICK PLAY version and install this which you had in Vista.
            Resource:
        Uninstalling Software in Windows 7
            Uninstall or change a program in Windows 7
        If you burned CD/DVD with C:\swsetup folder before upgrade to Windows 7 then you will find Vista version there.
HP Quick Launch Buttons here (ver 6.50.17.1 for 32/64 bit Win7)
HP Wireless Assistant here (ver 3.50.12.1 for 32/64 bit Win7)
Ps.
If you will have still problems with finding any driver then let me know about it.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Similar Messages

How to install drivers for ati radeon 3200?and how to config xorg.co ?

how to install drivers for ati radeon 3200?and how to config xorg.conf?

mawch wrote:how to install drivers for ati radeon 3200?and how to config xorg.conf?
Hello
I am using ati hd 3200 which is integrated with my motherboard. If you are using arch you can download & install through pacman. The package is named like catalyst*. You can install them by issuing as root user
#pacman -Sy
#pacman -S -l | grep -i catalyst
#pacman -S catalyst catalyst-utils
After installation reboot your machine in runlevel 1. (single mode). Ensure "fglrx" module is loaded correctly using
#lsmod | grep -i fglrx
If the resultant output have "fglrx" part the module is loaded correctly. The next step is to create a working /etc/X11/xorg.conf. Backup your current xorg.conf if needed.
#cp /etc/X11/xorg.conf /etc/X11/xorg.conf.bkup
Then issue
#aticonfig --initial --input=/etc/X11/xorg.conf
This will create a new xorg.conf file. Now we can test our confign.
#telinit 3
I am using runlevel 3 to avoid graphic messup!!
issue
#gdm
If you graphical login screen works correctly there is nothing to do more except adjust your monitor resoloution as you like.
To know your ati driver is working correctly issue as root
#fgl_glxgears
If gears are rolling happily it seems correct. You can also know more about installed ati driver
#fglrxinfo
Now the installed driver version is in the output
If there is any problem try following
##### Soloutions to solve various display problems using ATI Catalyst Drivers in Linux #####
yes video playback is choppy until i ran :-
sudo aticonfig --overlay-type=Xv
Try adding the following to the 'Device' section in /etc/X11/xorg.conf
Option "TexturedVideo" "true"
### This is a half solution for mythtv problems. Run mythtv in window (no full screen) If You have a screen resolution of 1024x768 try the command;
mythfrontend --geometry 800x600
Append the "Device" Section of /etc/X11/xorg.conf file as follows;
Section "Device"
Identifier "Videocard0"
Driver "fglrx"
Option "OpenGLOverlay" "off"
Option "VideoOverlay" "on"
Option "TexturedVideo" "on"
Option "TexturedVideoSync" "on"
Option "Capabilities" "0x00000800"
BusID "PCI:1:0:0"
EndSection
Add following in the .bashrc of each user or /etc/bashrc file* Most Effective In My Case!!
export LIBGL_ALWAYS_INDIRECT=true
####### Arch Linux - Add the "nopat" option to the /boot/grub/menu.lst or /boot/grub/grub.conf
####### as in the following example
title Archlinux Ice Kernel
root (hd0,1)
kernel /boot/vmlinuz26-ice root=/dev/sda2 ro resume=/dev/sda3 quiet splash nopat
initrd /boot/kernel26-ice.img
NB: REGULAR DISCLAIMER IS ALSO APPLICABLE TO THE ABOVE MATTER; USE IT AT YOUR OWN RISK !!! ALL THE ABOVE INFORMATION IS COLLECTED FROM VARIOUS POSTINGS IN THE FORUM AND FROM MY OWN EXPERIENCE
Wish U good luck
mvdvarrier

I installed window7 on mac but not able to connect internet. how to install drivers

i installed window7 on mac but not able to connect internet. how to install drivers if it needs to be.

if you downloaded driver updates through bootcamp onto flash drive then once windows is installed, open the flash drive in windows. You'll see an application called Setup. Double click on it and it will install all the drivers for wireless and ethernet and usb.
You cant just tell windows to search for driver updates. These EXPERTS aren't telling you this.

Windows trying to install drivers for iPod...

So here's my problem. Whenever I try to connect my girlfriend's iPod, Windows XP trys to recognize a new device and the driver installation wizard pops up.
I get a popup on the taskbar and Windows tries to install a driver for the iPod. If I cancel the installation it tells me the installation failed and there may be a problem with the device. The same thing happens if I allow the installation to continue as Windows in unable to find the correct driver.
The iPod shows up in Device Manager with an exclamation point. It does not appear in Windows Explorer or iTunes.
Any thoughts would be greatly appreciated. I have tried the 5R's to no effect. I have tried everything I can find in the support articles relating to iPods not being recognized in Windows or iTunes.

I get a popup on the taskbar and Windows tries to install a driver for the iPod. If I cancel the installation it tells me the installation failed and there may be a problem with the device. The same thing happens if I allow the installation to continue as Windows in unable to find the correct driver.
ipods use the standard Windows USB mass storage drivers. it is possible for those to go walkabout on a PC ... if that's what is happening here, the techniques from the following MarkJones post may be of some assistance:
MarkJones: Re: Windows XP (SP2) Laptop only finds generic "New USB 2.0 Device"

How to install drivers in xi server.

hi,
how to install drivers in xi server while using different jdbc adapters.
i mean to connect with jdbc adapters we need to install drivers in xi server.
how to do that .
if u reply with steps then its good for me.
thanks in advance.
jpk

Hi jpk
If you want use jdbc adapter .. you need to deploy the jdbc drivers first..
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bf4b1055-0d01-0010-32a3-b3848d77a6b9
please click this link.. and you will get one pdf file..
if your r using MS sql 2000.. for example you ned to downlaod the msutil.jar.etc..tow more jjar file are there..down laod this and follow the pdf file.. how to deploy. teps..
Don't forget to give points...
Kumar

First i did download the the soft ware of update iOS verion 7.1.2 into my computer and now how to install to my iphone

first i did download the the soft ware of update iOS verion 7.1.2 into my computer and now how to install to my iPhone please explain

Hi,
You update your software from your phone - Update your iPhone, iPad, or iPod touch
Jim

I want to delete VM fusion and windows 7 then install windows 7 with bootcamp, how do I do this? Help Please!!

I am running VM Fusion firm ware and windows, so I can check my military email form time to time and esign documents from time to time. But it is way way too slow, Can anyone tell me how to delete the firm ware and windows and then use bootcamp to run windows? Please help!

1. Are you backing up your entire drive? If yes, it will include you Mac and the VM, both, unless you specifically excluded.
2. In a nutshell, leave your VM intact, if you have about 50-100GB free on the current hard disk.
3. You can install Windows via Bootcamp on the existing disk, provided #2 is true.
4. What type of a Mac do you have, the year/model would help fill in more specific details.
5. The steps to install Windows via Bootcamp are
     a. Run Application -> Utilities -> Bootcamp Assistant.
     b. It has three check boxes, which will download Windows drivers which support Apple hardware, partition you disk, and install windows
          using the install media. Depending on #4, it may require using a USB2 flash drive of 8/16 GB.
     c. Once you have Windows installed, you may need to install drivers that support Apple Hardware.
     e. You can transfer files from your VM to your Bootcamp Windows installation. At this point you can delete the VMwar
          Windows, if you like.
     f. Please be aware that to run Windows under Bootcamp would require selecting Windows and rebooting the Mac overtime you want to switch between OSX
         and Windows.
This is the quickest set of steps that will have Windows running.

How to install drivers for windows 7 from bootcamp

how to install bluetooth driver for windows 7 (bootcamp)?

make the usb stick or cd disc from osx bootcamp with all the apple drivers
start windows
navigate the usbstick or disc and install the bluetooth drivers

Windows 7 cannot install drivers for iphone 3gs

i have an issue with my iphone 3gs it will not let me into the phone all i keep getting is emergency calls and switch off, so i tried to connect to my new laptop (windows 7) to restore my phone and it says unable to install drivers to window 7 could someone help please

it says iphone is in recovery mode does anyone know what this means and how to fix

No video on Windows 8 after installing drivers

Hello,
I've just done my first Richland build, specs in signature, and freshly installed Windows 8 on it. Upon first boot, it just uses a generic display driver and all seems to work ok, except, I cannot rate my computer, it breaks with some error that it couldn't test playback performance.
So, I've then downloaded the latest driver pack for my 64-bit Windows 8 OS, installed it, accepted the offer to reboot, got the usual message, and then the display went black and into standby. If I switch it off, and back on, I can see the windows splash screen for a split second before it goes black again.
I can use the latest restore point, and I at least get display, but if I reinstall the drivers, same thing happens again.
Seeing I don't seem to be able to figure out what is wrong, I wanted to at least test this under Windows 7. Installed a fresh copy of Windows 7, display is there, rating works, but graphics performance sections are rated 1.0. Went and installed the latest driver pack, no issues, rated my system again, and graphics performance is now rated 6.8, which is about what is to be expected for integrated.
So, seeing this all at least seems to work under Windows 7, does anyone have any idea as to why this isn't working under Windows 8, and what I might be missing?
Thanks!
[Edit]
It seems I didn't wait long enough on Windows 7. Have got the exact same symptoms on Windows 7 now.
Either the new drivers simply are buggy (possibly, seeing it's a brand new APU), or my new APU has a dodgy GPU on board, which may hold up in BIOS mode, and being utterly underutilized by the generic driver?
I don't really want to RMA my new APU if it's just a driver issue. But how to be sure?
Anything else anyone can think of I could try? Or is there actually a way to test your onboard GPU for hardware errors?

Quote from: XFM on 25-June-13, 09:38:20
GrG, did you use the MSI chipset drivers or AMD drivers for IGP?
http://www.amd-drivers.com/download-RadeonHD8670D-mobility-driver-for-Windows7-64bit.html
Just to make explicit note, I had no luck with this driver set either.
Quote from: petter on 27-June-13, 04:41:32
Sure but I have updated my bios through MSI live and it put an old one insted of the newest, so now my richland cpu is not supported :S
For real? You've used live update to update to the latest BIOS and it updated your 2.x BIOS to 1.x? AFAIK, the current last BIOS you can auto-update to is 1.7, but I imagined it would only let you update if your BIOS version is < 1.7, seeing it clearly states that once you've gone to 2.x, you cannot go back to 1.x. If it really did that, I'd consider that to be a serious bug MSI should really fix. Why on earth would they break Richland support if you've got a Richland APU in your board on update?
Quote from: petter on 27-June-13, 04:41:32
thisway first I have to flash a new bios somehow. After that I am gonna deal with the graphics driver. However I am very disappointed with MSI services and products so far
Sorry about your separate issue, if I was in your shoes, I'd be extremely disappointed with MSI too. In my case, my current disappointment is slightly offset by previous good experience.
That aside, I've made a little progress on my issue. With the default BIOS settings, the most my display ever held up before dropping out was as long as it took to run a full 3DMark 11 test. Not sure how long exactly, but it would have been well under 30 minutes, and I managed that once maybe. Most of the time, it dropped out straight on login. Now, I've managed to push the maximum time of having a stable display to around 4 hours, simply by turning AMD Cool'n'Quiet off in the BIOS settings. Initially, I thought it fixed it, once I went past two hours, but around the 4 hour mark, bang, display dropped out again.
So, if disabling AMD Cool'n'Quiet can make such a big difference, what might that mean? And what else then could I possibly try in the hopes of getting a stable display? Anyone else having any other ideas?
Any suggestions are most certainly appreciated!

How to install drivers without Internet?

Hello
I have installed Windows 7 (downgraded from 8) with USB flash disk and faced to this problem - I can not install drivers, including USB and Ethernet controller, that is my laptop does not have access to the Internet and does not see USB-devices. How can I install drivers in this situation if the laptop even has no DVD-ROM?

Hi @Johannes_Russeu ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP ENVY 15-j001er Notebook and needing Windows 7 drivers. Here is a link to your drivers page.
You need to check in the device manager for your specific drivers.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Dual boot Arch and Windows XP (arch installed first) [solved]

I recently moved over to arch from Ubuntu, and would like to install Windows XP so that I can dual-boot between the two. However, my arch install created four partitions on my disk, and I can not create another one.
I would rather not have to reinstall arch, as setting it back up would take days on my current network connection. Is this possible? While I have installed XP over Ubuntu in the past (and am more than able to reform the MBR after the XP install) I have absolutely no experience with disk-partitioning, so concise instructions would be very much appreciated.
errata: my laptop has 4 gigs of RAM, so I don't think I need the SWAP partition. I am hesitant to delete it outright however.
this is a Gparted screenshot, running off of a Ubuntu live CD. The 60 gigs of unallocated space is where I was hoping to install windows.
Last edited by spotdart (2009-02-05 17:13:55)

What's on /dev/sda4? If you can blow away the last partition, turn the whole thing into an extended partition and then you can set up as many logical partitions as you want inside the extended partition. I suppose Arch is probably on sda4 and if that is the case you could move arch to sda3 first--there are lots of posts in the forum about how to move an installation of arch from one place to another.
Edit: Beat to the punch again. Yeah like he said you might want to delete the swap partition and then incorporate it into the 1st or third partitions so you can free up that last one.
Last edited by bgc1954 (2009-02-05 15:27:21)

How to install drivers for nvidia geforce 6800gt for AGP

I might be completely blind, but I have no idea as to how to install the necessary drivers I need for my new (used) graphics card. My card is not displaying properly (doing all this in safe mode) and I'm pretty sure I need the drivers. Please help.
Thanks in advance.

So sorry for wasting anybody's time. Steve, you're right, the drivers were already there. I missed a very, very small detail on the card and the instructions. There were 2 minuscule pieces of tape that needed to be pulled off from the card (I guess they were left on in case the buyer had a g4. But with a g5, and 8x agp, those two little pieces of tape needed to be pulled off. After I pulled them off and re-installed the card, everything started up immediately and display works! Sorry again, but thanks for the quick response.

Updating Windows Installer to Install Drivers

So I've partitioned my hard drive, installed Windows XP, but when I try to install the drivers, It gives me a message saying that I need to update the Windows Installer. So I tried my Windows XP reinstallation disc and it said the same thing, so I tried to update the installer so I could install the drivers. The problem is I need internet to update the installer, and I need to install the drivers for Airport. Is there any way I can get around this?

Hi,
sounds to me like you used either a XP version prior to SP 2 (Service PAck 2) or a manufacturer-bundled version that originally was sold with another computer.
XP with SP2 and non-bundled is the minimum requirement for BootCamp.
Regards
Stefan

Bootcamp and Windows XP/7 Install Questions

I got an iMac a few months back and want to set up BootCamp for a Windows install.
I have a Windows XP Full install disk w/the product key.
I also have a Windows 7 Upgrade disk.
From what I have read, the newest version of Bootcamp will not install XP, which I could then upgrade to W7 (I assume this is correct).
Can I then install from the Windows 7 Upgrade disk and at some point indicate the XP Product Code?
Secondary question - assuming I get Windows installed and running properly, if I boot to the Mac OS, can it see/access the Windows partition?
Thanks,
Steve

If the Windows 7 Upgrade is a full install. What you would do is install, then reinstall over itself. And only then will it activate.
There are upgrades that are to go from Home Premium to Pro and that isn't a full install.
Windows 8 CP is free and works.
Windows 7 System Builder are $99 for Home Premium 64-bit

Adobe Lightroom 4 for Mac and Windows, can I install the same license on both systems or only 1?

I just purchased 1 full license of Adobe Lightroom 4 and I can see there's an installer for Mac and Windows.
does it mean I can install on both systems or my license is only valid for 1?
Thank you
BR,
Lucia

Yes, LR is cross-platform and you can install it on both systems.
Mylenium

TX1410US and Windows 7 - How To Install Drivers?

Similar Messages

Maybe you are looking for