Tx2: Automatically Zooms screen in and out continuously. Help!

I have a Touchsmart Tx2.
When not doing anything specific with the computer (on the desktop and online) the screen zooms itself in and out continuously. It will not stop unless I shut down the computer. The mouse jumps all over the place, the icon that you see when you touch the screen and pinch to zoom in and out shows up, and it just starts zooming. My icons on my desktop are huge. My internet browsers and all other programs I use are huge. I don't know how to fix this. Please help!!
I know some about computers but not too much. Ill try anything to make this stop.
(BTW, have had this computer since April 2009)

my keyboard also stops responding after using the llaptop for above an hour it works normally on next restart but again stops after a while

Similar Messages

I can't crop/edit a photo in Facebook because when I touch the screen it just zooms the whole screen in and out

I can't crop/edit a photo in Facebook because when I touch the screen it just zooms the whole screen in and out
I am trying to update my profile picture and cover photo and Facebook advises to crop the area of the photo you want and select the area you want by dragging the area of photo , but every time I touch the screen it just zooms the whole page in and out and I can't turn it off :-(

If your email account offers a webmail access, I suggest checking the webmail - log in to your account using the webmail access, and I predict you will see all those "unread" emails there and can dispose of them from there.
This happens because the iPhone that went bad, when reading those emails, did not remove them from your email provider's servier.

Even after turning ON Reduce motion the icons and the windows and the apps zoom motion in and out is still giving me a lot of head ache and dizziness and motion sickness... Please fix it!!

Even after turning ON Reduce motion the icons and the windows and the apps zoom motion in and out is still giving me a lot of head ache and dizziness and motion sickness... Please fix it!!

hi i had the same problem today when i updated my itunes to latest version. however, i have just found my songs in the 'itunes media' folder. this was accessed through 'my music' then keep clicking through until you find itunes media and all my library songs were in there and i then just added these files to my library and all were restored however, i have lost all my playlists but at least my 700 songs are back. very dissapointed with apple that they have let this happen with their latest update, the previous version was miles better than this one . hope you find them. stevo

IMovie: is there a shortcut key to zoom timeline in and out?

iMovie: is there a shortcut key to zoom timeline in and out? I'm on imovie 11 version 9.0.4
posted: Tuesday October 30, 2012

The normal way to zoom in and out would be to use the thumbnail slider. I am not aware of any keyboard shortcut for this.
Here is a list of the keyboard shortcuts for iMovie.
http://help.apple.com/imovie/#mov3ae8c33b
Interestingly, in Final Cut Pro, there is a keyboard shortcut for zooming the timeline. For example, Shift-Z will scale the project to fit the timeline, and command+ and command- will zoom.

Some of my photos in iphoto turn blank (white) when I tried to edit the size like zoon in and out.Can someone help me on this?

Some of my photos in Iphoto turn blank (white) when I tried to edit the size like zoon in and out.Can someone help me on this?

As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Is there a way to zoom images in and out without changing the frame?

It is easy to move an image around within a frame without touching the frame, but I have not found a way to zoom in and out without touching the frame. I'm working with a lot of images (Indesign CS6 for PC) and I need to do this a lot. Thanks.

I don't know what is the correct terminology, but none of those things does what I want. With the Content Grabber I can move the image and see where it is going and place it where I want it, and the frame does not move and is not changed in any way. I want something that does exactly the same thing with "zooming" in and out on the image.
Shift-drag on the corners moves the frame. In the Transform panel, in the lower box, it makes the image AND the frame larger or smaller. Neither of these is what I want.
If I'm not using the right terminology, let me try to explain. If I have an image that is larger than the frame, then I can only see a small part of the image inside the frame. If I could zoom out on the image, I would then see a larger part of the image in the frame, but the frame would be exactly the same size and in exactly the same place (just like it would be when you use the Content Grabber). If I could zoom in on the image, then I would see less of the image but in more detail.
If I could move (like the Content Grabber) AND zoom without doing anything with the frame, then I could get the image just the way I want it inside an already-properly-placed frame in the most straightforward and simple manner, and be able to see what I was doing in the process. Dragging on the corners is basically trial and error because you have to go through several steps before you see the final result.

Screen Saver and Size of Background - Help, please!

Hello there!
I have a brand new Dell computer from Best Buy. With my last computer (Gateway), I was able to set up an automatic screen saver of a slideshow of pictures if my computer was not used for a certain amount of minutes.
With this new computer, I have set up the same settings, but the screen saver NEVER comes on. I have clicked everything I need to, accepted, and saved the settings, but it never works. Any ideas?
I decided to try and fix it myself, so I went into the Control Panel, Appearance and Personalization, Change Screen Saver, and then went into Power Settings to see if maybe the display wasn't working for this reason. I cannot remember what I did, but now the background picture is HUGE.
To fix this, I have gone into screen resolution and display/power settings, but everything seems to be set to "recommended", so I cannot figure out what happened to make the images so large suddenly.
1) Can you help me get the screen saver slideshow to activate?
2) How do I get my background pictures back to normal size?
Thank you so much for your help!!! I really appreciate it.
Royce*****

Wow, so sorry for the hype delayed response. it could be that your laptop was timing out for powersave before the screensaver would kick in. The best thing to do is go into your screen saver, set it to 1 minute and then let it sit for a minute without touching it (with it plugged in). It should kick in. Again, most laptops cut the monitor off after just a few minutes to conserve the power of the battery. I'm glad that the other solution worked for you =)
“Computers have enabled people to make more mistakes faster than almost any invention in history, with the possible exception of tequila and hand guns” - Mitch Ratcliffe
If my answer was helpful, please click the Kudos button so I know =)

Screen has cut out, desperately need help!

The screen on my iMac has cut out. It has happened before and I have had to restart the system to get it back. This time however that hasn't worked. I have booted up the system and can access the files using a second machine via ethernet and the screen did come back briefly when I pressed the ctrl ket before going blank again. I am pretty sure it is not a hardware problem but desperately need a suggestion to help recover the situation.

When I start the machine the screen briefly goes white after the startup chime then goes black again. The same thing happens when I do command-R. The system continues to boot up and I can access the files from my other machine. On two or three ocasions the screen has momentarily come on when I have touched a key or the mouse. For a brief second everything looks OK then it is gone again.

My iMac screen is freaking out...help!

It's doing two different things (not usually at the same time):
- Sometime when I move a window, like in Safari, a chunk of the window will remain behind. Or look as if it is (the chunk doesn't actually do anything). But if I move anything over that chunk, then move it away again, it's gone.
- Sometimes the whole screen (or part of it) will go all wonky in that the text (actually everything) will disappear and there will be only scattered colors left behind. The actual functioning of the Finder is usually not affected - I could have shut the system down if I only got lucky enough to navigate blindly to the appropriate menu item.
Reinstalling the system does not help. (I have an iMac Core 2 Duo which I bought in about September of '06)
What should I do?
Message was edited by: Babaganoosh

Babaganoosh wrote:
It's doing two different things (not usually at the same time):
- Sometime when I move a window, like in Safari, a chunk of the window will remain behind.
- Sometimes the whole screen (or part of it) will go all wonky
Reinstalling the system does not help.
Your first priority is to ensure you have complete backups of everything from the internal drive in the iMac just in case your system is dying; it could be just the graphics system or it could be more serious. Once you have your backups, either call Apple for advice, take it to a reseller to have it fixed if it seems a reasonable cost or consider upgrading to a new iMac. Shame you are a few months beyond any AppleCare warranty.

IPhone screen black and nonstop continuous vibrating. Is that a warrenty issue?

My iPhone started vibrating and would not stop! I tryed different things to try and make it stop. Finally after 15 min I thought about just holding down the power button and the home button longer. I held I until it did turn off. Can't the phone or the vibrate on the phone get damaged from this? I want to know if I could turn it in as a defect in the phone. I did have other problems also with my phone where I had to reset it like that. (Phone froze a few times)

Bring your phone in to Apple for evaluation. If found defective, it will be replaced.

Video pauses and audio continues. HELP!!!

When playing videos in iTunes the video pauses every now and then but the audio continues, after about 10 seconds the audio will appear on fast-forward as if trying to catch up to the audio. Has only recently started happening. What can i do? PLEASE HELP!V

I am having the same issue I posted this elsewhere
I have a Mid 2010 Mac Mini Server (full specs below) and very recently it has developed a strange problem. I'll be watching something on iTunes and the video will stop but the audio continues. If I move the mouse and click on the screen the video suddenly plays very fast untill it catches up with the audio and then for a while it will play normally. I can go through this process 3-4 times an hour before I give up and stream to my iPad instead.
in the beginning it only happened when I was using the HDMI cable but recently it happens when the mini VGA adaptor is plugged in too.
its beginning to be very frustrating so any help would be truly appreciated.
thanks
James
Mac Mini Specs
Intel Core 2 Duo 2.66 Ghz
8GB Ram
Running Lion Server 10.7.2 (111C74)
ITunes 10.5.2

Why does my iphone 4 go in and out of charging when plugged in?

I have an iphone 4 with the recent ios8 update installed but for some reason recently it does not charge right away when plugged in, and when it finally does charge it can blink on the screen in and out of charging like the cable is not supported. It is the same iphone 4 lightning cable that I bought with it so that can't be the issue right? I restarted the phone today as well and that still didn't fix it. It will charge the battery all the way when it connects properly but the connection is the problem. Is this a hardware or battery issue that can be fixed easily?

Yes, as paulcb says, it's most likely because coverage inside the building stinks. You're lucky you can get the EDGE signal inside. The last place I worked, AT&T had to come out and place an antenna inside the building. Largely because we threatened to cancel our contract of over 500 phones with them if they didn't fix it.

Overlay a sequence in and out point

I am trying to create a clip that will be played on a loop so I want to make sure that the in and out point are identical (the clip is of an object which is rotating). Is there a way to overlay the in and out point to help me line up the placement of the in and out points?
Thanks in advance,
Chad

Here's how I'd take the trial and error out of it:
Create a new sequence
Nest your main sequence in the new sequence twice--one copy on V1, the other on V2. Leave plenty of space before the one on V1.
set the opacity of the sequence on V2 to about 50%
move the playhead so you see the first frame of the sequence on V2
select the sequence on V1
use the Nudge Clip Selection Left/Right shortcuts to move the instance on V1 until the frames match as closely as possible.
Trim the instance on V1 and delete the instance on V2, or else note the frame and go back to the original sequence to trim it there.
Here's what the sequence with the two nested sequences would look like:

In and Out selection

Hi
I´m trying to cut something in a movie with Quicktime 7.4 pro!
I have read in the support i have to mark the "In and Out selection"
_+*QuickTime Category Icon*+_
_+*Cutting, Copying, or Deleting a Section of a Movie*+_
+*Selecting and moving, copying, or deleting (trimming) part of a movie is easy in QuickTime Pro.*+
+*To cut, copy, or delete part of a movie:*+
+*1. Move the playhead until the desired frame appears, or select the part of the movie you want to modify (use the In and Out selection markers and the arrow keys).*+
+*2. Choose Edit > Copy, Cut, or Delete.*+
+*If you choose Copy or Cut, you can paste the selection elsewhere.*+
+*3. Position the playhead where you want to paste the selection and choose Edit > Paste.*+
+*QuickTime Pro inserts the selection you pasted at the position of the playhead.*+
+*You can also delete all parts of a movie that are not selected by choosing Edit > "Trim to Selection."*+
+*Note: After you delete parts of a movie, the file size stays the same until you choose File > Save As and select "Save as a self-contained movie."*+
But i can´t find out to set this "In and Out selection" someone help me? I feel so stupid
Message was edited by: Smuccel
Message was edited by: Smuccel

This is one of the few things that actually got a lot better in QT Pro 7...
In the controller at the bottom of the QuickTime movie window, above the controls and below the picture, there is a kind of a timeline. On top of that there is a downward-pointing triangle. That is your "playhead indicator" and it represents your current location in the movie. Under the timeline are two smaller triangles. In QT-6.5, they are upward-pointing triangles; in QT-7 it looks like two half-triangles with feet, pointing upward. Those are your in and out markers. By sliding those along the timeline you can select a section of the movie for editing. The OUT marker is ALWAYS to the right of the IN marker.
In QT-7 you can also set the in and out locations by moving the playhead to the frame you want to mark and hitting "I" or "O" on the keyboard. If you attempt to set an out point to the left of the in point, or an in point to the right of the out point, QuickTime will automatically reset the other edit point to the same frame.
--Dave Althoff, Jr.

I am have problems with the ipad mini, it is a little crazy. It controls by itself, opens and closes application zooms in and out, end my facetime calls, Also Un certain part of the screen is no longer responsive to the touch.

I am have problems with the ipad mini, it is a little crazy. It controls by itself, opens and closes application zooms in and out, end my facetime calls, Also Un certain part of the screen is no longer responsive to the touch, it Should be having so much problems. Thanks for your help.
iPad, iOS 7.0.4

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Tx2: Automatica​lly Zooms screen in and out continuous​ly. Help!

Similar Messages

Maybe you are looking for

Tx2: Automatically Zooms screen in and out continuously. Help!