TX2000 no sound from front headphone jacks

Hi everyone, Ive started this because I have a major problem with my pavilion tx2000. it is not outputting any sound from the front headphone jacks, it was working okay on windows 7 64 bit but one good day without any aparent reason it stopped working I mean, I used to plug my headphones and immediatly the laptop speakers shout and I coud hear music from any of the two front headphone jacks but one day I did it and the speaker didnt shout and I couldnt hear anything from the headphones, assuming that the headphones were the problem I plugged another headphones that I knew were working fine with the same result.
I was using windows 7 default drivers then I updated the drivers from the official realtek site (I thnk version R267) with no effect, then I installed linux and plugged the headphones, to my surprise audio were outputting from both, the laptop speakers and the headphones, after some configurations I managed linux to output audio only from the headphones but I have to change it manually if I wanted the laptop speakers to work, I then reinstalled windows 7 64 with the updated driivers from realtek, to my surprise realtek audio manager will pop up a message saying "you just plugged and audio device" BUT ONLY IF I PLUG SOMETHING TO THE MICROPHONE JACK!!!!! otherwise it won´t say anything even if I plug my headphones to any of the both headphone jacks, my assumption is that somehow the headphone jacks lost its sensibility and are not detectng the headphones and as so they wont route the audio signal through them, also Ive read on forums that I could change something in the realtek audio manager as "disable front audio jacks" or something but i can´t see that option anywhere in any of the various versions of drivers I´ve tried on the various OSes Ive tried, Also in some point I did notice a red ligth coming out from the first headphone jack, I assumed it was spidf signal or something.
What im thiking is that this is hardware related, that somehow the jacks lost sensibility and cant detect my headphones, the question here is this: I dont mind routing the audio from the laptop speaker to the headphone jacks manually (I mean with some script or something), but is there any way to do so In windows, In linux I could but in windows I just cant seem too get it to work without windows detecting my headphones automatically, or do I have to change the whole front panel in my laptop, it is offcourse out of warranty and I don´t want to keep spending money on this as this is quite an old machine wich Ive invested way too much.
THANK YOU ALL IN ADVANCE.
HP Pavilion TX2000 (tx2032la)
Windows 7 Ultimate 64-bit
NO sound from front headphone jacks.
No hardware changes made.

Oh and one more thing:
In the Audio tab in Sounds and Audio Devices in Control Panel, it has this option of
"Use only default devices"
Is it OK to check that?
Does that mean that if I choose Audigy 2 for the sound playback and etc. options, it would "lock" the default as Audigy 2?
Because as I said, I don;t want to go back and forth switching from onboard to Audigy over and over.
I just want Audigy as my sound, and be able to use the headphone jack on the front bevel of my computer.

Similar Messages

  • No sound from front headphone jack after SoundBlaster installat

    Hi everyone, I recently bought a Sound Blaster Audigy 2 Value PCI Sound Card.
    I installed it as normal as any other PCI card. I disabled onboard sound in BIOS. I installed all the Creative software and drivers, and the sound is working...but only from the sound card at the back of the PC.
    I have on my Dell 4550,at the front of the PC tower: 2 USB ports (which still work), and a headphone jack, which doesn't work.
    The headphone jack at the front used to work before I instlaled the Audigy 2 card, but now, after the installation, it doens't work.
    Does anyone have a solution to this or an explanation as to why it is behaving like this?
    Any info is greatly appreciated.
    Thanks!
    Michael

    Oh and one more thing:
    In the Audio tab in Sounds and Audio Devices in Control Panel, it has this option of
    "Use only default devices"
    Is it OK to check that?
    Does that mean that if I choose Audigy 2 for the sound playback and etc. options, it would "lock" the default as Audigy 2?
    Because as I said, I don;t want to go back and forth switching from onboard to Audigy over and over.
    I just want Audigy as my sound, and be able to use the headphone jack on the front bevel of my computer.

  • How can I remove the background sound from the headphone jack for my MacBoo

    for my MacBook Air problem adding music intensifier (Panasonic ST-HT1000) to give it an unpleasant sound background that sounds like a whiz, it's not so loud, but it is an unpleasant .. after a short time can get used to, but the fizz does not pass, however, believe that it is a big problem.
    Further I notice that when MacBookAir disconnected from the charger, it remains quieter sound.
    At first thought that the headphone jack (3.5 mm Headphone:
    Connection: 1/8-Inch Jack) or wiere have problem, but tried 3 different cables, but that does change enything, the problem remains.
    When I added iPhonu3GS playing - the background sound were not, then everything is OK!
    How can I remove the background sound from the headphone jack for my MacBook Air 13?

    There is no way to bring that up unless you have it typed in a document. You can use My Support Profile to find a list of serial numbers that have been purchased or registered with your Apple ID.
    http://support.apple.com/kb/HT2526?viewlocale=en_US 
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD  240G Vertex 3 SSD Boot HD 

  • I have the djay app on my ipad and i want to record the set i'm playing on my iphone through garageband. i need to take the sound from the headphone jack of the ipad, as the 30pin connector will be used to connect to the DJLive accessory. Is this possibl?

    i have the djay app on my ipad and i want to record the set i'm playing on my iphone through garageband. i need to take the sound from the headphone jack of the ipad, as the 30pin connector will be used to connect to the DJLive accessory. Is this possibl?reco

    You may get a better response in this community:
    https://discussions.apple.com/community/app_store/garageband_for_ios

  • No Sound Output from front headphones jack on HPE-070a

    Two days ago, i purchased a new HPE-070a with Windows 7 64-bit and Realtek HD Audio Drivers. Unfortunately, while the sound output to the speakers from the rear jack is working really well, the headphone jack at the front of the box has no output. I've updated the Realtek drivers and reinstalled them as well,but when I run the troubleshooter, it tells me that "sound playing not functioning". The PC recognises that, once the headphones are in that's where the sound is output, but there's nothing going on.
    If you've got any ideas, it'd be greatly appreciated if you could let me know. If i don't have headphones, my girlfriend's going to be assaulted with Counter Strike and Dragon Age!
    Thanks.

    Beaker, have you checked in the Control Panel to assure that all boxes are checked correctly?  It may be that the headphone jack is not enabled.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • High pitched (~15KHz) tone from front headphone jack

    I often use headphones plugged into the the front audio jack while using Final Cut Pro. After playing audio, I will often hear a very annoying tone somewhere around 15 KHz. Playing any audio will make the tone go away. Sometimes it doesn't come back, but it always eventually comes back. I can't wait till I get old and lose my hearing so I don't have to deal with this stupid tone.

    I had problems like this on my G5 tower (which I have since upgraded to a Mac Pro). I purchased a USB sound device to plug my headphones into. There are myriad options out there from M-Audio and other companies. Cost can be anywhere from ~$75 on up. If you are interested in this, I can post more info. The nice part about this route is that you will get much higher sound quality than the headphone jack on the computer because these external devices often have high quality DACs (digital to analog converter) chips.

  • No sound from the headphone jack

    MacBook Intel, purchased Jun 2007, Leopard 10.5.1 here.
    The problem - about two weeks ago headphones stopped to work. The effect is: I plug them into the headphone jack, the preferences show that sound output changes to headphones, the sound comes out of the headphones then after between 20 to 50 seconds it is cut and goes dead. Removing the jack and plugging it again gives another 20-50 seconds of sound.
    Checked five different headphones + one set of external speakers. Same effect. Checked with different audio sources inside the system. Same effect.
    Checked system config - everything fine, OS "thinks" the headphones are on but the sound is cut in less than a minute.
    Did reset as described (switch off, remove power sources, hold power button for 5 seconds, power on) - this brought back the familiar sound when the computer powers on (was silent previously, though I didn't notice it) but the headphone effect persist.
    What can I do besides sending to Apple for repair?

    AndyBrandt wrote:
    Did reset as described (switch off, remove power sources, hold power button for 5 seconds, power on) - this brought back the familiar sound when the computer powers on (was silent previously, though I didn't notice it) but the headphone effect persist.
    What can I do besides sending to Apple for repair?
    if the start up didn't have the normal tone then that means that when you restarted/shutdown the computer then you had the volume on either mute or down very low..
    So i assume that your computer speakers work fine...
    i think that it may be the computer switching to mute all the time when an external device is plugged into the headphone jack.... either way you have 5 months left on your warranty and i would take advantage of that or you may be kicking yourself in july...
    cheers

  • No sound from MacBook headphone jack until the cable is plugged in and -out

    Hey there! If I connect speakers (iPod Hi-Fi) to my shut down MacBook and then start the MacBook, there's no sound neither form the MacBook nor from the speakers.
    If I plug out the cable the sound comes from the MacBook as usual, if I plug it in again the Hi-Fi works regularly. How come?

    Hi,
    The HDMI sound may disable the other sound therefore you need to disable HDMI sound (remember put back if you wish to use it). Please check this video:
       http://www.youtube.com/watch?v=LlYXiTK05nM
    For example, in my machine I can just disable HDMI sound from this area:
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HT2844 My front headphone jack does not work when connecting a head phone to a new mac pro desktop computer.  The sound still comes from the speakers.  Any solutions?

    The front headphone jack on my new mac pro desktop computer does not transmit sound when connecting a headphone or ear buds.  The sound still comes from the speakers and is not redirected to the head phone.  The port has never worked.  Any solutions?

    okay, try option-clicking on the speaker icon on the top of your screen. That should bring up a list of sound output options. including headphone. You could try messing around with Audio MIDI. It may be possible that the thing is still stuck inside the headphone jack. Careful use of a toothpick may get it unstuck. I dunno, I've never had a problem with the headphone jack. If all else fails, call Apple or take 'er in for an appointment
    JB

  • No sound from front or read audio jack

    I am using an 810-230qe Phoenix Envy with WIndows 8.1 Pro. I am unable to hear sound from the front headphone jack or the rear audio jack. Speakers also do not work from the rear jack. I have an HDMI cable connected to my monitor, however, I went into the NVIDA controls and disabled sound for that. 
    I have uninstalled the driver and then reinstalled. No luck with either jack. Headphones work in all other devices. I have even tried different headphones. This is a new computer, just a few days old and this is the first time I tried to use sound. 
    Any ideas?

    Hello aloehnert,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand you are having audio issues on your HP ENVY Phoenix 810-230qe CTO Desktop PC. You stated that you disabled the audio on your monitor does that mean it worked before you disabled it? Has the audio ever worked on this and is just not working now? If you go to the control panel and click on Sounds what devices do you see there and are they Enabled or Disabled?
    If you could answer these questions it would help a great deal in getting you  a possible solution. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Equium L40 - Lost sound in the headphone jack

    Hi, Hoping someone can help.
    My current sound driver is Soundmax Integrated Digital HD Audio. And from what I remember has always been. I've downloaded it a few times from the Toshiba site for my computer and it always comes back to this driver.
    The problem I have is that somewhere along the line it has lost sound in the headphone jack. I can no longer tell if i have a hardware problem or if the jack is broken. I now have Windows 7 installed but the problem was there when I had the original Vista program installed.
    A few things my system tells me(Don't know if it helps)
    Location 0 (Internal High Definition Audio Bus)
    C:\Windows\system32\drivers\ADIHdAud.sys
    C:\Windows\system32\drivers\drmk.sys
    C:\Windows\system32\drivers\portcls.sys
    If i can't fix this because it is the jack can anyone tell me of another line for sound out I could use please? possibly USB.
    Thanks for reading.

    Hi buddy,
    Can you hear sound via internal speakers?
    That means the problem only is the headphone jacket?!
    I think if the internal speakers work but no external speakers or headphone it seems to be a hardware issue. Have you also checked the Windows sound settings for audio output port?
    In worst case you need professional help from an authorized service provider. Here you can find a list of them:
    http://eu.computers.toshiba-europe.com > Support & Downloads > Find an authorized service provider

  • Digital Audio Noise from the Headphone Jack

    I have been searching for a while to see if anyone else has this problem.
    I have random faint digital noise (bleeps, bloops, and whirls) from my headphone jack. This happens regardless of application. I can get it going good by just tossing the volume bar back and forth on the sound pref panel.
    I have considerably less of this from the line out but still detectable noise.
    I have disconnected everything non essential from the Mac Pro and my power outlet are reduced to a minimum. (monitor and Mac)
    I have tried numerous headphones including Etymotic ER•6 and Sony MDR-7505.
    This has always been present in 10.4.7 and 10.4.8. Like I said, its faint in volume - but it gets annoying!
    I have read the following below and believe these do not apply to me because this is not an external powered device.
    Power Mac G5: I hear buzzes, beeps, or humming
    http://docs.info.apple.com/article.html?artnum=86523
    Macintosh: Solutions for noise in the audio signal
    http://docs.info.apple.com/article.html?artnum=86655
    Thank you!
    2 x 2.6 GHz Mac Pro   Mac OS X (10.4.8)   1 GB original RAM

    I found out today what is causing the noise on my Mac Pro!
    Our next door neighbor has a really high power HAM radio that I am picking up static and transmissions from. I thought I was going insane when I heard weird voices coming out via my headphones. I know it is our neighbor because I heard him relay his name and location. Had to get my wife to listen to prove I was not going crazy.
    Here is the weird thing. I do not have AirPort or BlueTooth on the MacPro...so I cannot figure out how the transmission is permeating the Mac. Could it be a shielding issue on some internal component?
    Thanks!
    Mac Pro 2.66   Mac OS X (10.4.9)   4GB / 1TB

  • How to separate the sound on my headphone jacks?

    hi. I have an hp pavillion dv6-6c50se Entertainment Notebook, and I'm using "Traktor 2" mixing software.  in order to hear separate sounds from my headphones and the external speaker, I need the sound driver to recognize them as separate devices(beats audio which is two-channel and has two headphone jacks) .  In fact , I can't separate them to have the monitoring sound in my headphones and the master, in speakers.  The device can only separate the sound between internal speaker and headphones(or speakers) which are connected to it.  So, how should I do it? (maybe muting the built-in speaker and transfer it's sound to the external speaker in some way? )
    thanks 

    Hello pkr_legend,
    Take a look at these symptoms and see if the troubleshooting steps help to resolve your issues.  Please let me know.
    Good luck!
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • How do I play audio from my headphone jack and internal speakers?

    How do I play audio from my headphone jack and internal speakers at the same time ? I have a splitter for my audio jack so that when i connect up my second monitor I can have it so it also plays audio as well as anything else i have connected into the jack but how do i let the internal speakers emit sound at the same time?

    Hello,
    If you mean the internal speakers in your Mac, you can't play audio through them at the same time you have anything plugged into the headphone jack. When you plug something into the headphone jack, it disconnects the internal speakers.

  • Video out from the headphone jack died... 30gb 5g

    Hi all.
    So, I have a 30gb 5g ipod. I have played video out of the headphone jack to a tv for years now. I have the apple version of the video out cable. So, recently, the video stopped playing. The audio plays. YES, it is set to tv out = on, NTSC. This worked fine. Now no video. Video DOES play on the ipod itself. And, I bought an expensive dock cable that has composite out and that does work for video. So, I am just wondering what happened to my video from the headphone jack. I guess I could try to get it fixed, but is it worth it? Any ideas would be appriciated! Thanks!!

    OK, I was DETERMINED to figure this one out...simply because it USED to work...
    Somehow (last 'update' I assume)...my 'TV out' was turned off.
    On my 80GB model, it was under menu > videos > video settings > TV Out
    I just turned it 'on' and I was back in business...of course it doesn't make up for last weekend, when I was out of town trying to get the darn thing to work...but at least it works now.
    Hope this helps.

Maybe you are looking for