Tx2000 wireless does not work all of a sudden

I just found out one morning that my WLAN doesn’t work anymore and my laptop could not search for wireless networks. Actually, I experienced the same problem a couple of months after I bought my laptop (by that time it was still under warranty). To avoid so much hassle in schedules, What I did was bring it back to factory setting and luckily solved the problem. Few months later, the same problem arose! Again, I cannot pick up a wireless signal in our house. From my previous experience, I set it back to factory setting hoping to fix it but this time around it did not solve the problem anymore. I searched over the net so I could fix it myself. And to my surprise it was not only me who had experienced this very same problem but a lot more in the world. One reason they brought out is the defective NVIDIA.
I’m really desperate to fix this because I cannot afford to buy a new one. My warranty has already expired since it was a year ago when I bought my laptop.
Please help me..

I have an TX1260ea and i also have this problem. I email HP support and they told me to do the usual stuff like reinstall drivers, flash bios, go back to factory settings. Of course none of them worked so they said it was a problem with the wireless card and would send me and new one, this was over 4 months ago and im still waiting.
However just before they sent me an email to say they will send me a new wireless card, i had already bought one from the internet, which i did recieve. However this card did not fix the problem either so it seems to be a problem with the part of motherboard that the wireless card connects to.
I was able to purchase a very small edimax usb wireless adapter for £10, which works a treat. My wireless card does work every now and again, but very rarely.
Message Edited by dont_be_hasty on 10-05-2009 01:30 PM

Similar Messages

Tomcat does not work all of the sudden

I intstalled Tomcat about 4 months ago, and since that time it has been working correctly. Today, it decided that it wasn't going to work and when I try to load http://localhost:8080 after starting Tomcat I get the following error message only:
HTTP Status 500 - No Context configured to process this request
type Status report
message No Context configured to process this request
description The server encountered an internal error (No Context configured to process this request) that prevented it from fulfilling this request.

well, now my application works when I type the full path name, but I still get the same error when I try to run tomcats home page. I don't understand the problem, and furthermore don't really care so long as I can run my own applications.

Short key for copy does not work all the time now.

After I have installed the latest OSX - Yosemite, my short key for copy does not work all the time. It is infrequent how it works. I'm using the same keyboard that I have always used, my wireless logitech keyboard for mac. Please help.

I've plugged in my default mac keyboard and the short key copy still does not work.

Tecra A3 - Creative Mouse Wireless does not work

My Creative Mouse Wireless does not work while touchpad is installed.
Even if I disable the Touchpad, the mouse seal does not work.
Does anyone know how to solve this problem?
Thank you,
R.P.

Hello
On this way it is not easy to say what the problem is. I assume that you got some installations software for your external device. Install it and it should works.
As far as I know functionality of external mouse doesn`t depend on touchpad settings.
Bye

TS5148 Apple TV powers up but does not display all of a sudden. Tried all of the advice on this page to no avail. Any ideas?

Apple TV powers up but does not display all of a sudden. Tried all of the advice on this page to no avail. Any ideas?

Try resetting the SMC and PRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM
However, I suspect you zapped the Mini, maybe the lower voltage part since you siad the fan works.
The power surge could have went into HDMI and damaged the TV.
Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Wireless printing on HP 6500A Plus -wireless does not work

windows 7, linksys E2000 router, sony vio computer wireless N.
No issues printing by USB. When using wireless, prints first few lines, then slows to a stop. Loses feed from router and disconnects. Tried disabling all firewalls, removed antivirus, etc - nothing is working. Not the only computer in household with same issue as well - Toshiba running xp is having same problems. Need fix or I will trash printer and never purchase HP again and I have long been an HP customer for printers.

There have been a few issues with printing using the new E-series Linksys routers. Make sure the router has the latest firmware. If that does not work, set a static IP address for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). Yours is 192.168.1.100 to .149. Let's use 192.168.1.200 for your printer.
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway and first DNS. Leave the second one blank.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

T500 Wake on Lan (wireless) does not work.

Hi,
I set up T500 (Windows 7 Ultimate 64bit) for wake on lan,
1) Enable Bios WOL
2) Enable WOL in power manegement tab of Intel WiFi Link 5300 AGN property in device manager.
But WOL does not work. Sending magic packet from a PC in the same WiFi segment does not wake up sleeped T500.
Are there any setting for WOL in lenovo tools ?
Does anybody use WOL(WiFI) on T500?
Thanks,

Is the T500:
Associated with an access point at the time it is put into standby/sleep mode?
Connected to AC power for the whole time it is in standby/sleep mode (in otherwords the whole time it is in a low power state) when you are attempting to use WoWLAN?
If not, that may be at least part of your problem, as it is a known limitation on WoWLAN operation.
You also need to have the laptop "set up" to the master workstation, and the WLAN configured to handle braodcast wireless frame, but I am presuming you have already done that side of things.
Cheers,
Bill
I don't work for Lenovo

HP 5524 Wireless does not work after firmware upgrade

HI,
I have just purchased an HP5524. After initial problems setting up the WPA key from the printer screen, I connected via USB, found the printer and swapped to wireless successfuly. I then installed the printer software on all my computers at home successfully over wireless.
The printer then needed a firmware upgrade to support eprint (?), which is successfully connected, downloaded the fireware, installed and went through the boot cycles successfully.
However, ever since wireless will not work. Before I return it to the retailer as "not fit for purpose" I thought I would ask the forum. The diagnostics downloaded a tool, which I went through, but this did not offer solutions that I had not already tried.
Thank you

Hi,
Thank you for posting you query,
In order to resolve the issue, please make sure the printer is placed closer to the router and uninstall the printer drivers already installed and then start the instalaltion and seelct teh connection type as wireless network. Then select use USB to configure wireless and when prompted conenct the USB cable and then select the network and enter the encryption key follow the onscreen instructions.
If the issue still persisits, please open the browser and in the address bar enter the IP address of the router and click on GO. This will take you to the router configuration page. On the router page, please click on Wireless Setup and please make sure SSID Broadcast is enabeld and the Wireless Mode is set to Mixed or 802.11 B/G/N and the Wireless Channel is set to 11 and click on Apply. Then try to connect the printer to the network by using the CD.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

Keyboard column not working - the column of keys containing screen bright, 2, x, w, s does not work - all else is OK. How do I fix?

The keyboard column is not working the column containing screen brightness, the number 2, X, W and S does not work. How do I fix this?

Some older scanners don't support presets. If this is the case, you can try this workaround as taken from this technical note Error: Bad Parameter | Acrobat.
In the Configure Presets dialog, choose the scanner attached to your computer from the Scanner pop-up menu.
From the File menu, choose Create > PDF from Scanner > Configure Presets.
In the Configure Presets dialog, click the pop-up menu to the right of the Scanner field and choose the scanner connected to your computer.
Click OK, and then choose Create > PDF From Scanner.

FIOS Mobile App - Wireless Does Not Work

Hello all,
I am trying to use the new FIOS Mobile app on my Android tablet. This should allow me to watch some live TV, however when I try to connect to a channel it tells me I need to be connected to my broadband router.
In my setup at home my FiOS broadband router does not handle wireless connections, only wired. I have a separate wireless AP that does this. Why should it matter where I get my wireless connection from, as long as I am connected?
Help.
Thanks,
Steve

billosaur wrote:
Someone may have thought this was a great idea, but it's very frustrating to download an app, know that you meet all the criteria for using it, then be unable to use it because the app is unable to differentiate successfully that you are, in fact, on you home network. There's one router in my home, it's a Verizon router, and the app should be smart enough to know this. It's obvious that this app was rushed out without a throrough enough suite of tests, because something this simple should not happen. Is there a ticket in place for this? Is the application support group actively trying to rectify this problem? I'll give Verizon a while to sort it out, but this doesn't please me.
Send the developers an email at [email protected] I'm fairly confident they don't monitor this site. If they don't hear from enough people like you with this issue, they won't fix it. So please notify them of your issue. Many are complaining on the Google Play app user reviews about the same problem you have. You can see then on the Google Play site by accessing the site via a PC.

OfficeJet Pro 8600 Plus Wireless DOES NOT WORK with Mac Mavericks Based Network

Replaced my Brother system with the HP OfficeJet Pro 8600 Plus yesterday. There are many positive features of the 8600 Plus that prompted me to purchase it...
Modular Design
Large legal sized Scanner
Standard/Legal Paper Printer
Copy
E Print Capability
High Yield / Affordable Toner Replacements
Unfortunately, I discovered the Wireless network capability is less than desirable. After hours of installing, reinstalling, work arounds, internet solution searches, it just will not work. If you are able to get the printer to work on your network (with router), the scanner will not be visible, vice versa, etc...etc...etc...
HOWEVER, I did discover this solution. If the unit is near your base computer, install it to your computer with a usb connection. That allows you to have scanning and printing from that unit. Then you can connect the unit through its ethernet connection to your router. From there all computers can print within your network. It's not the best way to connect a WIRELESS printer, but at least it works.
I'm not certain why HP and Apple can't find a solution, but I never found anything on the net that worked. The problem seems to stem from the new Mavericks update from Apple, but I'm really not sure. I wasted an entire day of productivity attempting to make it work. I'm posting this so you don't make the same mistake. If you happen to know a verified solution, then I would welcome the information. Best of luck!!!

It may be a mac driver issue. Try installing the bootcamp update for your version of vista from here:
http://www.apple.com/support/bootcamp/
I'm not sure if this is supposed to work since I've never tried mac hardware at 5ghz on windows before...

Macbook wifi not working all of a sudden

So while doing a fresh install of ML on my unibody MB I ran into a snag just a few moments ago. Everything installed no problem, I updated to 10.8.1 yesterday and all was well. Today I installed a few other apps (skype, iLife 09) with iLife requiring a reboot. Once rebooted I was unable to get a wifi signal.
At first the little icon at the top bar was blank indicating wifi was turned off. I selected turn wifi ON and it now says looking for networks and after a few moments it fills the blank icon with grayed out lines, yet it never finds a network to connect to, just keeps looking. In system prefereces/network the wifi status shows to be OFF. Pressing "turn wifi on" next to the status does nothing. The button lights up blue when pressing it but it has no effect on the network status. Network Name shows a grayed out "Wi-Fi Off". I have done several re-boots and several shut downs and battery removals all without solving the issue. Using network diagnostic does not turn the wifi on either, just gets stuck on scanning. Connecting an ethernet cable gets me online no problem.
My other mobile devices indicate that my wifi network is alive and well. This led to me to think that perhaps the hardware crapped out, which would be strange that it did that all of a sudden. So I took the hard drive out and put it my SSD that resided in my MB until a few days ago (with everything still intact on the drive). Booted up and wifi is working fine. The only difference is that the SSD is running 10.8. I was thinking of updating it to 10.8.1 to see if that kills the wifi but I did the update on the other drive yesterday and had no problems with it after a reboot. The problem started today after the skype and iLife install and reboot. In other words the MB ran 10.8.1 fine for 24 hrs and I find it strange that iLife or Skype would cause this issue but that is when the problem started, so I'm stumped.
Is there a way to force wifi to turn on in terminal? Or any other suggestions? Anyway to go back to 10.8 or do I have to re-install everything from scratch?
Thanks, Mark

Please disregard this thread. Although I did a search before posting, I did not find what I was looking for at the time. I have since found the appropriate thread here https://discussions.apple.com/thread/3196661?start=270&tstart=0

IPhoto not working all of a sudden!

Just to start this off, yesterday, iphoto worked perfectly fine. All the things that I am trying to do today, I did yesterday without an issue. Furthermore, I have not installed anything from the time it worked until the time it stopped.
So, the problem. When I opened iPhoto today it seemed to work fine for internal things like making albums, and such. However, if I attempted to export photos to mail or open in an external editor (Photoshop) it didn't work. In the case of Mail, the progress bar pops up and it appears to be sending the photos, but then nothing happens. If I open mail and try to drag photos to Mail, it gives me the little '+' symbol, but the photos do not show up in mail. If I try to 'edit photos in external editor', Photoshop opens but the pictures don't come in (no errors are reported). On top of all this, if I try to quit iPhoto, nothing happens. iPhoto does not close, but continues to work normally for organizing and moving photos.
My first attempt at a solution was to repair permissions (that fixes EVERYTHING). That seemed to work. I opened iPhoto again grabbed a random photo and sent it to Mail, no problem. Figuring this was solved, I then got the real photos and tried to send them to mail and the problems all came back. I began to think it was those photos, so I tried to send the one that worked a moment ago, but the problem continued on that one as well. I then remembered that 7.0.2 had just come out so I updated that, but the problem continued. I then repaired permissions again, but no luck.
Anyone have ANY ideas?!?!?

friane
Repairing Permissions only works on System Files, not data files such as your pics. Download BatchMod from
http://macchampion.com/arbysoft/
And apply it to the iPhoto Library Folder using the settings found here:
http://homepage.mac.com/toad.hall/.Pictures/Forum/BatChmod.png
(Credit to Old Toad for this one).
Regards
TD

HT201406 why is the touch on the bottom part of my screen not working all of a sudden on iphone 4s?

all of a sudden over night the bottom part of my screen does not react to touch i have moved the bottom row icons through itunes but this still doesnt allow me to use this section of the screen once im inside an app. such as banking?????????

Hi zoejane1710,
Thanks for visiting Apple Support Communities.
It sounds like your touchscreen is being unresponsive. The steps in this article can help:
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
Regards,
Jeremy

Buttons not working, all of a sudden?

Nothing has changed, no editing was done, and all of a sudden, buttons not working. I trued exporting from Flash again, with the same pblish settings. Bit Action Script seems to give me a message now saying it wont export as a button. Tried AS 2.0 and 3.0, but i made original files in 3.0
thoughts???
thank you!

Either convert that symbol to a button symbol so that you can use the code you showed, or assign it an instance name and place the following code in the timeline...
yourMCName.onRelease = function(){
getURL("page2.html","_self","GET");
Where yourMCName is whatever instance name you assign

Tx2000 wireless does not work all of a sudden

Similar Messages

Maybe you are looking for