TX2500 when I turn it on the capslock and num lock flash at a rate of 3 seconds apart ?
When I turn the computer on the capslock and num lock flash at a rate of 3 seconds apart until I turn the machine off. I have checked everywhere and have also tried the hard reset and nothing works...also the screen does not turn on at all to display any messages of any sort.I can hear the fans kick on though
Same problem with my 2 yr old HP Pavilion tx 2000
I sent it back to HP for repair and paid around $300. It broke down with the same symptoms after 2 weeks. Sent it back to them again. Again after a month the same issue happened. Luckily all of this happened within 90 day warranty. Sent it to them again.
Now today after 4 months of last repair my laptop wont turn on, with exactly the same symptoms. Called HP today, and the representative was trying to sell me a new laptop a srepair is no more under warranty.
I spent $900 on the original computer and another $300 for repairs and what they are advising me now is to buy a new one. Even they dare to ask me to buy their product again as they say I should not judge the company through my bad experience.
Similar Messages
-
My hp pavilion dv4 screen wont turn on but the cap, and num lock blink
My Hp pavilion dv4- 2145dx and my laptop screens stays black but the key board stays on like the caps lock and the number lock, the mouse, volume, and the wifi light they all turn on and so do the fans but the caps and num lock blink every second at this point i dotn know what to do can anyone help
Hi,
First, try a Hard Reset as follows.
Shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for a full minute. Re-insert the battery, plug in the AC Adapter and see if the notebook will start.
If it still doesn't start, is there a sequence to the 'blinks' that you can match to the table below?
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
i have some problem with my computer because when i turn it up, the screen turns in a blue colour and the sound doesn't work and in this way i can't hear anything
Will u help me or not?
-
I went to use my ipod touch 8GB but it wasn't working, when i looked closer it was on just very very dim. The brightness is turned up all the way and the screen is practically black.. does anyone know how to fix it?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings If yu can see the screen enough to do it)
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store since you have a hardware problem.
Apple Retail Store - Genius Bar -
I own a hp officejet pro 8500a premium and when i turn it on, the screen shows 83c00009
i own a hp officejet pro 8500a premium and when i turn it on, the screen shows 83c00009
HI I hope you are having a great day and sorry to see that you are having this issue,
if you still having this issue I will do my best to assist you
Read this article follow the steps on it GO HERE
If you are using Win xp or later you one of several very good troubleshooting utilities that HP offers GO HERE read the intendd use and run the one that fit your needs;
If you are not experiencing this issue any longer or you are not using Windows, let me know I will be deeply appreciated
Hope I can be of help;
RobertoR
remember↓↓↓
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance! -
I recently got a an iPod 5 generation as a gift and while I was in my settings I turned on the voice over to check the percentage of my battery, so I turned it off and now I can't unlock it. Even when scrolled my fingers on the screen and typed the password but it would unlock, please can some one help me with this
You have the accessibility VoiceOver feature turned on.
Triple click the home button and try going to Settings>General>Accessibility and turn VoiceOver off. You may have to use three fingers to scroll the screen to get there. If problems see the following for how to turn off via iTunes:
iPhone: Configuring accessibility features (including VoiceOver and Zoom) -
When I turn on my Macbook Pro and sign in, the screen is blank, none of the icons appear, I can't click, open or do anything! Help!
You could try this; Mac OS X: Starting up in Safe Mode.It takes awhile to come up so patience is a virtue here.
And here is What is Safe Mode.
DALE -
When I turn my iPad the screen doesn't turn?
When I turn my iPad the screen doesn't turn- please help?
On the top (near the battery indicator) do you see a little circle with a padlock in the middle? If so, there's a slide switch by the volume toggles. flip that switch and see if it restores the accelerometer
-
When I turn my iPod the screen does not turn with it :(
When I turn my iPod the screen does not turn with it >:(
Try here:
iOS: Not responding or does not turn on -
I ERASEd WINDOWS. I want to re-install it and before, i'd'like to re-install all the system (10.6.7). But that seems to be impossible. When i try to turn on with the softare and pushing "c", blind screen. When i turn on it normaly, and put the disc after, the process begins and stops 5 minutes after. The computer turns off. Has someone an idea to help me ? Thanks by advance.
ZachThank you for your answer.
And...Yes, i did : i inserted the install disc and started up holding the C key. Many time. But each time, the logo of install disc appeared during ten minutes and then, during the installation, he disappeared suddenly with no reason. And in the same time the computer turn off.
The beginning of the storry : my son made long time ago (a year) the partition between Mac and Windows. Everything was fine.
Recently, He decided to give more memory space to windows.
He could do that directly (perhaps, was there a way but he did'nt know it)
For this reason, he decided to desinstall Windows in a first step before reinstalling it.
But before doing this, he decided to re install all the system, like for cleaning his computer...and then, since, it's a big mess.
You know everythin now.
Could you help us ?
Thanks by advance. -
My Ipod touch shows message"Ipod needs to cool down before you can use it"
I turned off the device (as said on the website) for several days. However, when I turned it on the message was still there.
What else do I need to do?
Please help.Place the iPod in recovery mode and then connect to the computer and restore via iTunes. For recovery mode:
Recovery mode -
When I turn on firefox the sound of an alarm begins and keeps going. I did not download or add or open anything. A sound like the old pacman game initiates the never ending alarm. It does not occur with safari and ends if I close firefox.
== This happened ==
Not sure how often
== I opened firefoxdont have google open in a tab!!!!!!!!
(if you are one who opens FF and it opens google then immediately open another tab to go to a site then just visit the site from the page that opened without opening a new tab)
OR
if you have cool preview then disable that
(the sound is for the celebration of 30 years of pacman and you can play the game on google's homepage) -
My daughter has an iBook G4. When you turn it on, the wallpaper comes up but no toolbar or icons. It's just frozen and you can't do anything. Any tips out there?
Once the Desktop shows up, then it is started up as far as it will go.
If it doesn't progress, then something is definitely wrong.
Do you know the capacity of the hard drive and how much space remains available on it? Sometimes operating anomalies such as this can happen if the hard drive is too full.
Do you have access to another Mac with FireWire? -
I can't get my screen to roll over when I turn phone on the side. It used to work, I might have set something wrong thanks
You may have locked the screen. Open Control Center by sliding up with one finger from below the bottom of the home screen. The orientation lock control is at the far right of the top row in Control Center (looks like a lock surrounded by a circular arrow). If it is on, the same icon will be in the menu bar. Also note that not all screens will rotate -- the home screen for example will not.
-
I just bought an ipad 2. When I turn it on the screen has a picture of the usb charger and the itunes logo. Any ideas?
tc777 wrote:
I just bought an ipad 2. When I turn it on the screen has a picture of the usb charger and the itunes logo. Any ideas?
Connect the iPad to iTunes on your Computer...
See Here for Getting Started...
http://www.apple.com/support/ipad/
And Here...
iPad User Guide iOS 5
http://manuals.info.apple.com/en_US/ipad_user_guide.pdf
Maybe you are looking for
-
I am considering using GROUP BY in several selects where I will access very big bsik, bsid, bsad, bsak, ecc... My two concerns are performance and high data volume. GROUP BY should reduce data arriving from DB but will it hurt performance? What are y
-
Extract the File Name with extension on double clicking it
Hi All, I have created on program in java and also created its exe file. The application store all the files you have selected in one directory, zip the folder and give the desired extension. example myApplication.fgc Now. I need to create an applica
-
Need help Getting outlook activex vi to workin Windows 7
Hi Folks, I was looking at a LV8.6 example that searches Outlook Email and Retrieve an Email's Subject, Body, and Return Address. I can't get this to work in outlook 2010 with Windows 7. when I execute using highlight execution with a know seach st
-
I've been trying to download the iOS 8.1.3 software update for several days now. However, it says that the download is going got take 20 hours and always times out before it actually happens. We have tied from several computers and verified that th
-
Web GUI new feature - creating a new record based on the current record
Vincent, We need new feature in Web GUI: creating a new record based on the current record with data from Moscow with money