TX2616au touch screen doesn't work after upgrading to windows 7

Hi,
I just got my TX 2616AU multi-touch tablet few days, it came with Windows Vista ,and the WACOM touch screen worked perfectly, by the pen and my finger as well.
I got a Windows 7 Ultimate and decide to upgrade the system. The upgrading process was all right, after the upgrading everything worked fine but the touch screen. It didn't response my finger-touching any more, worked with the pen but the pen was running crazy.
So I downloaded and installed ALL drivers for Windows 7 from HP website for this model tablet, everything looked fine but the problem's still there. I searched internet and followed some advice, downloaded the driver from WACOM for Windows Vista and installed it, it reported a error, gave me a BLUE SCREEN then restarted and then the pen got back to normal, thanks GOD! But it still refused to response my finger-touch, Im out of idea...
Any suggestion would be appreciated!
Ted

Hi
I think the Flash Card support Utility and the Value Added Package would solve the issue but Im not quite sure if the links posted by Jeka are right
Please visit the Toshiba European driver page and choose your notebook model.
Then download the Flash Card support Utility and the Value Added Package for Win 7 64bit!!
Ensure that VAP should be installed at first and then Flash card support utility

Similar Messages

Touch screen doesn't work after Vista Home64-bit upgrade to Windows 7 64-bit Home Premium on IQ506

Hello, right before I upgraded to Win7, I made sure that the Touchsmart software worked and that the touch screen itself worked. As soon as I performed the upgrade (not the clean upgrade that wipes all your existing data, but rather the upgrade that carries over your applications and files), the touch screen ceased to work.
I didn't panic, thinking that I probably had to run some windows/hp updates, which I did to no avail. I also manually updated ALL the driver/software files found at this link http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=4063&lc=en&dlc=en&cc=us〈=en&product=3752245
Yup, every single one. As a last resort, I tried some of the HP troubleshooting for touch screens not working. It said to shut down the computer, pull the plug on the computer, hold the power button for 5 seconds, plug the computer back in, and boot it up again. Didn't help at all.
I'm at the end of my rope and there is no additional HP support on this. I'm waiting for a reliable driver update for win7 for this **bleep** touch screen. I'm dead in the water -- I've got a touchscreen computer whose touchscreen doesn't work! Someone else out there must be having this problem! Any leads?

Did you try installing the Touch Driver?
http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=4063&lc=en&dlc=en&cc=us&product=3752245&lang=en
Driver
Date
Version
Previous
Size
» NextWindow Multi-Touch Device Driver Update
11-2009
1.3.0.2
2.83M

Touch screen doesn't work after resetting the phone. Could the screen be locked?

After following the previous touch screen not working message, I reset the phone but still doesn't work. Could there be a screen lock? Or any other way for the touch screen to work?

Hi there Angelicness3011!
The touch screen responding correctly is pretty important for you to even use your phone! I'm sorry to learn you've been having issues with it. Let's review some options together!
You mentioned you reset the phone. Does this mean you removed the battery & put it back in? Or does this mean you able to complete an actual Hard Reset?
Instructions on a Hard Reset can be found here: http://bit.ly/Q00sJ9
Your information is generally backed up to Google or Backup Assistant and your SD Card. If possible, please sign in to double check.
If you're unable to hard reset and removing the battery doesn't resolve the concerns we may have to look in to replacement. Does your phone have any physical or liquid damage? How long have you had your phone? Do you have insurance?
I look forward to your responses!
Melissa_VZW
Please follow us on twitter @VZWSupport

3rd gen iPod Touch touch screen doesn't work after I updated to iOS 5.1?

I updated to iOS 5.1, and now my touch screen doesnt work at all. All of the buttons work, and it responds, but nothing else works. I would restore it but it's locked with a passcode and I can't unlock it without the touchscreen.....I have no idea whether this is a failure is 5.1, or if it's something I did.

Try a hard reset first to see if that does any good. To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
If no luck with that, you'll need to manually connect your iPod to your iTUnes library in recovery mode using the instructions in the Apple support document below. Doing so will allow you to bypass the passcode and restore the iPod.
iOS: Unable to update or restore
B-rock

Hp hdx18 touch buttons are not working after upgrading to windows 7

hey,
i upgraded to windows 7 but touch the buttons have stoped working (like the treble&bass), so wt should i do!

For Treble&Bass functionality on HDX16 and HDX18 install the Tone Control driver SP45617.exe
For Touch buttons install QuickLaunch driver SP45058.exe
Before installing Tone Control you need to have the IDT audio driver for HDX16/HDX18 installed - SP45011.exe
Message Edited by ArtAppreciator on 10-23-2009 11:57 PM
Although I am an HP employee, I am speaking for myself and not for HP

Simple pass doesn't work after upgrading to Windows 10

Hi all I just upgraded to Window's 10 (took 3 hours, works). However HP Simplepass now doesn't work. Anyone else with this problem? Brian

Hi I fixed this issue using "Run programs made for previous versions of Windows" . BrianH15

Media Smart touch (tx1005au) function not working after upgrading to windows 7

I have successfully upgarded my tx1005au vista OS to Windows 7. It seems others things are allright but when i tried to use Media Smart fingure touch to rotate pictures it didnt work however my fingure touch was fine for opeing and closing functions.
Please suggest me a solution.
Thanks in advance.

For Treble&Bass functionality on HDX16 and HDX18 install the Tone Control driver SP45617.exe
For Touch buttons install QuickLaunch driver SP45058.exe
Before installing Tone Control you need to have the IDT audio driver for HDX16/HDX18 installed - SP45011.exe
Message Edited by ArtAppreciator on 10-23-2009 11:57 PM
Although I am an HP employee, I am speaking for myself and not for HP

My palm m105's touch screen doesn't work properly after a sync.

I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
My palm m105's touch screen doesn't work properly after a sync.
I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
Thanks in advance!
Post relates to: Palm m105
Post relates to: Palm m105

Maldoman578,
Let's help solve this mystery together! Is your screen freezing after every reboot? Is there any physical/liquid damage on the device? When did this issue begin? Did you notice this after a recent update or application download?
EfrainM_VZW
Follow us on Twitter @VZWSupport

I cannot use my ipad2 because the touch screen doesn't work at all. First I cannot unlock it or do anything in the screen!!!! Why?

I cannot use my ipad2 because the touch screen doesn't work at all. First I cannot unlock it or do anything in the screen!!!! Why?

Have you tried a reset To see if that fixes it ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

ITunes doesn't work after upgrade to iOS 6

iTunes doesn't work after upgrade to iOS 6. The white screen with gray tape above appears, and nothing more happens. Reinstalling/restoring iOS doesn't help. I have contacted support team in my country (Russia) by phone, but they could not solve the problem. Is there downgrade to iOS 5.1.1 available?

What printer are you using? Is it listed here:
http://support.apple.com/kb/ht4356

I cant open apps on my iPhone 4 the touch screen doesn't work. I have restored my phone and still nothing works.

I can't open apps on my iPhone. The touch screen doesn't work. I have restored it already but it still won't work. What can I do.

If the touch screen is not having any response then you probably have a hardware failure. Take your phone to an Apple Store or authorised service provider to have it checked.

Touch ID doesn't work after ios 7.1.1 update

Touch id doesn't work after ios 7.1.1 update..
Why????

After IOS update, you first have to use passcode.
Passcode is needed when
After restarting your iPhone 5s
When more than 48 hours have elapsed from the last time you unlocked your iPhone 5s
To enter the Touch ID & Passcode setting

Mail server doesn't work after upgrading from SL to ML

My Mail server doesn't work after upgrading from SL to ML
Mail client connects with the Mail Server wich seems to run but then they can't receive any email...
the problem seems to be related with dovecot ... in my smtp log i get this:
relay=dovecot, delay=324, delays=324/0.02/0/0.01, dsn=4.3.0, status=deferred (temporary failure. Command output: pipe: fatal: pipe_command: execvp /usr/libexec/dovecot/deliver: Permission denied
I have to say that in the usr/libexec there wasn't the dovecot directory so I just tried to create one but with no luck
Any Ideas?
Cheers
Carlo
This is my postconf -n info:
server:Data admin$ postconf -n
biff = no
command_directory = /usr/sbin
config_directory = /Library/Server/Mail/Config/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
data_directory = /Library/Server/Mail/Data/mta
debug_peer_level = 2
debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin xxgdb $daemon_directory/$process_name $process_id & sleep 5
dovecot_destination_recipient_limit = 1
enable_server_options = yes
header_checks = pcre:/etc/postfix/custom_header_checks
html_directory = /usr/share/doc/postfix/html
imap_submit_cred_file = /Library/Server/Mail/Config/postfix/submit.cred
inet_interfaces = all
inet_protocols = ipv4
mail_owner = _postfix
mailbox_size_limit = 0
mailbox_transport =
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
maps_rbl_domains =
message_size_limit = 20971520
mydestination = $myhostname, localhost.$mydomain, localhost
mydomain = moremoremore.it
mydomain_fallback = localhost
myhostname = server.moremoremore.it
mynetworks = 127.0.0.0/8,192.168.178.0/24
newaliases_path = /usr/bin/newaliases
queue_directory = /Library/Server/Mail/Data/spool
readme_directory = /usr/share/doc/postfix
recipient_delimiter = +
relayhost = mail.mclink.it
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = _postdrop
smtp_sasl_auth_enable = no
smtp_sasl_password_maps =
smtpd_client_restrictions = permit_mynetworks permit_sasl_authenticated reject_rbl_client zen.spamhaus.org permit
smtpd_enforce_tls = no
smtpd_helo_required = yes
smtpd_helo_restrictions = reject_invalid_helo_hostname reject_non_fqdn_helo_hostname
smtpd_pw_server_security_options = cram-md5,gssapi
smtpd_recipient_restrictions = permit_sasl_authenticated permit_mynetworks reject_unauth_destination check_policy_service unix:private/policy permit
smtpd_sasl_auth_enable = yes
smtpd_tls_CAfile = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.chain.pem
smtpd_tls_cert_file = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.cert.pem
smtpd_tls_exclude_ciphers = SSLv2, aNULL, ADH, eNULL
smtpd_tls_key_file = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.key.pem
smtpd_use_pw_server = yes
smtpd_use_tls = yes
tls_random_source = dev:/dev/urandom
unknown_local_recipient_reject_code = 550
virtual_alias_maps =
server:Data admin$

if this could help:
mail:setStateVersion = 1
mail:readWriteSettingsVersion = 1
mail:connectionCount = 11
mail:servicePortsRestrictionInfo = _empty_array
mail:protocolsArray:_array_index:0:status = "ON"
mail:protocolsArray:_array_index:0:kind = "INCOMING"
mail:protocolsArray:_array_index:0:protocol = "IMAP"
mail:protocolsArray:_array_index:0:state = "RUNNING"
mail:protocolsArray:_array_index:0:error = ""
mail:protocolsArray:_array_index:1:status = "ON"
mail:protocolsArray:_array_index:1:kind = "INCOMING"
mail:protocolsArray:_array_index:1:protocol = "POP3"
mail:protocolsArray:_array_index:1:state = "RUNNING"
mail:protocolsArray:_array_index:1:error = ""
mail:protocolsArray:_array_index:2:status = "ON"
mail:protocolsArray:_array_index:2:kind = "INCOMING"
mail:protocolsArray:_array_index:2:protocol = "SMTP"
mail:protocolsArray:_array_index:2:state = "RUNNING"
mail:protocolsArray:_array_index:2:error = ""
mail:protocolsArray:_array_index:3:status = "ON"
mail:protocolsArray:_array_index:3:kind = "OUTGOING"
mail:protocolsArray:_array_index:3:protocol = "SMTP"
mail:protocolsArray:_array_index:3:state = "RUNNING"
mail:protocolsArray:_array_index:3:error = ""
mail:protocolsArray:_array_index:4:status = "OFF"
mail:protocolsArray:_array_index:4:kind = "INCOMING"
mail:protocolsArray:_array_index:4:protocol = "Junk_mail_filter"
mail:protocolsArray:_array_index:4:state = "STOPPED"
mail:protocolsArray:_array_index:4:error = ""
mail:protocolsArray:_array_index:5:status = "OFF"
mail:protocolsArray:_array_index:5:kind = "INCOMING"
mail:protocolsArray:_array_index:5:protocol = "Virus_scanner"
mail:protocolsArray:_array_index:5:state = "STOPPED"
mail:protocolsArray:_array_index:5:error = ""
mail:startedTime = "2013-01-21 21:18:32 +0000"
mail:logPaths:IMAP Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:Server Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:POP Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:SMTP Log = "/var/log/mail.log"
mail:logPaths:Migration Log = "/Library/Logs/MailMigration.log"
mail:logPaths:Virus Log = "/Library/Logs/Mail/clamav.log"
mail:logPaths:Amavisd Log = "/Library/Logs/Mail/amavis.log"
mail:logPaths:Virus DB Log = "/Library/Logs/Mail/freshclam.log"
mail:imapStartedTime = "2013-01-21 21:18:34 +0000"
mail:servicePortsAreRestricted = "NO"
mail:state = "RUNNING"
mail:postfixStartedTime = "2013-01-21 21:18:32 +0000"

Touch screen doesn't work!!!

I got my TP two weeks ago, played with it for a day and a half then, in the middle of surfing the web, the touch screen doesn't work. I've contacted HP support and sent my device in for repair. I got it back two days ago (12/30/2011), worked totally fine for 20 mins and the touch screen didn't work again. I've tried using WebOS Doctor 3.0, 3.0.2, 3.0.4 nothing works.
I've tried rebooting it multiple times, still doesn't work. Frustrating I must say....
Any suggestions?
Post relates to: HP TouchPad (WiFi)

Gotcha, so I just want to make sure I'm following you correctly. At this point the screen is probably all black from the auto-turn-off thing. You hit the power button, and the little yellow lock icon appears on the bottom. But when you try to drag the little lock icon, nothing happens. Does that describe what's happening to you?

I have iPhone 5 and the touch screen doesn't work

I have iphone 5 and the touch screen doesn't work,i want to restart it but my touch screen is not working. I read lots of reviews and support from online all in vain. Please help me fix the problem.
<Re-Titled By Host>

Do a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the device to boot back up.
No data is loss doing a reset.

TX2616au touch screen doesn't work after upgrading to windows 7

Similar Messages

Maybe you are looking for