Txt plain output or documentation on delimted format

I'm trying to get plain text output for a simple form (not a report) to interface with a legacy product that only reads text input. How can I get information in plain text?
Delimited format seems like it'd be a kludge more than the solution.

Hi
There are OMBIMPACT and OMBLINEAGE commands in scripting.
Cheers
David

Similar Messages

  • Report Format completely changes when I export to TXT (plain)

    Post Author: cmainard
    CA Forum: Exporting
    Help!
    I finally figured out how to make my details flow "continuously" rather than being "stacked" in a column
    (section expert: details: Format with Multiple Columns)
    so on the Report, it looks just as I need it to be.  BUT when I export, it comes up in columns again!!
    How can I make my export formatting match what I'm viewing?   Its a pretty simple report... but I'm stumped again.
    thank you!!
    cm

    Post Author: SKodidine
    CA Forum: Exporting
    When you are exporting it into TXT (Plain) how many characters per inch are you using??  I created my own interface as well and I used a page size of 8.5x11 but fit in 400 characters by using a font size of 2.  For exporting into plain TXT, I use 53 characters per inch.
    Play with that number and by trial and error you will get it all in one line again.

  • Error while sending PO output through mail in PDF format - Urgent

    Dear friends,
    Developed program to send sapscript output through mail in pdf format, the program running properly, even function module SO_NEW_DOCUMENT_ATT_SEND_API1 returning sy-subrc 0. But the external mail is not going to user lying in SAP outbox with message <b>"Wait for communications service"</b> . SCOT is properly configured, tested mails sending through SAP office.
    Find below the source code:
    REPORT  zmm_porder_gm
                NO STANDARD PAGE HEADING.
    TABLES: ekko, ekpa, t161t, t052, komv, j_1imocomp, t001, esll.
    Internal Tables
    DATA : txt LIKE tline-tdline,  "HEADER LINE
           your_ref LIKE ekko-ihrez, "your ref
           our_ref  LIKE ekko-unsez, "our ref
           mcompname  LIKE  t001-butxt,
           itemname   LIKE  ekpo-txz01,
           del_text LIKE tline-tdline, "delivery text
           mat_po_text LIKE tline-tdline. "material po text
    DATA: g_ind TYPE i.
    DATA: it_esll LIKE esll OCCURS 0 WITH HEADER LINE.
    DATA: sub_packno LIKE esll-sub_packno.
    DATA : po_flag(1) TYPE c.
    DATA : it_erev LIKE erev OCCURS 0 WITH HEADER LINE.
    DATA : nmebeln LIKE thead-tdname,
           obj LIKE thead-tdname.
    DATA : tline LIKE tline OCCURS 0 WITH HEADER LINE.  "HEADER TEXT
    DATA  : it_ekko LIKE ekko OCCURS 0 WITH HEADER LINE.
    DATA  : it_ekpo LIKE ekpo OCCURS 0 WITH HEADER LINE.
    DATA  : it_zmm_porder  LIKE zmm_porder OCCURS 0 WITH HEADER LINE.
    DATA  : it_konv        LIKE konv OCCURS 0 WITH HEADER LINE.
    DATA  : it_konv_ftr    LIKE konv OCCURS 0 WITH HEADER LINE.
    DATA  : it_konv_rate   LIKE konv OCCURS 0 WITH HEADER LINE.
    DATA  : it_komv_tax    LIKE komv OCCURS 0 WITH HEADER LINE.           " For Tax Calculation
    DATA  : it_zmm_house_bank LIKE zmm_house_bank OCCURS 0 WITH HEADER LINE.
    *DATA  : mrate TYPE konv-kbetr VALUE 0, mrate1(15).  rmoved by ganes and added following logic
    DATA  : mrate TYPE p VALUE 0 DECIMALS 2, mrate1(15).
    DATA  : mrate_gm TYPE p  DECIMALS 2.
    DATA  : BEGIN OF it_konv1 OCCURS 0,
                  knumv LIKE konv-knumv,
                  kschl LIKE konv-kschl,
    END OF it_konv1.
    DATA : BEGIN OF it_t052u OCCURS 0.
            INCLUDE STRUCTURE t052u.
    DATA : END OF it_t052u.
    DATA  : mpay_terms LIKE t052u-text1.
    DATA  : mwaers     LIKE konv-waers.
    DATA : BEGIN OF xt052 OCCURS 0.
            INCLUDE STRUCTURE t052.
    DATA : END OF xt052.
    DATA : it_t16ct LIKE t16ct OCCURS 0 WITH HEADER LINE.
    DATA : BEGIN OF ztext OCCURS 0.
            INCLUDE STRUCTURE ttext.
    DATA : END OF ztext.
    DATA  : it_t001      LIKE t001 OCCURS 0 WITH HEADER LINE.
    DATA  : mtext(15)    TYPE c.
    DATA  : it_adrc      LIKE adrc OCCURS 0 WITH HEADER LINE.
    DATA  : it_adrc_ven  LIKE adrc OCCURS 0 WITH HEADER LINE.
    DATA  : it_adrc_plt  LIKE adrc OCCURS 0 WITH HEADER LINE.
    DATA :  it_makt      LIKE makt OCCURS 0 WITH HEADER LINE.
    DATA :  it_eket      LIKE eket OCCURS 0 WITH HEADER LINE.               " Schedulling
    DATA :  it_eikp      LIKE eikp OCCURS 0 WITH HEADER LINE.               " Export
    DATA :  it_t001w     LIKE t001w OCCURS 0 WITH HEADER LINE.
    DATA  : it_t685t     LIKE t685t OCCURS 0 WITH HEADER LINE.
    DATA  : it_t618t     LIKE t618t OCCURS 0 WITH HEADER LINE.
    DATA  : it_t685t_ftr LIKE t685t OCCURS 0 WITH HEADER LINE.
    DATA  : it_lfa1  LIKE lfa1 OCCURS 0 WITH HEADER LINE.
    DATA : it_bapi_mltx_ga LIKE bapi_mltx_ga OCCURS 0 WITH HEADER LINE. "Material long text
    DATA : mfirst   TYPE i  VALUE 0,
           mpay_flag(1) TYPE c VALUE 'X',
           mwerks   LIKE    t001w-werks,
           msr      TYPE i  VALUE 0,
           l_rate   TYPE p  DECIMALS 2  VALUE 0,
           l_amt    TYPE p  DECIMALS 2  VALUE 0,
           mflag(1) TYPE c,
           mlctr    TYPE i  VALUE 0,
           mfamt    TYPE p DECIMALS 2 VALUE 0,
           mcfamt(15) TYPE c,
           mfword(100) TYPE c,
           mkschl   LIKE konv-kschl,
           mchgamt  TYPE p  DECIMALS 2 VALUE 0,
           mkbetr   TYPE p  DECIMALS 2 VALUE 0,
           mkwert   TYPE p  DECIMALS 2 VALUE 0.
    DATA : j_1iexcd     TYPE  j_1imocomp-j_1iexcd,
           j_1icstno    TYPE  j_1imocomp-j_1icstno,
           j_1ilstno    TYPE  j_1imocomp-j_1ilstno.
    DATA : mjmop_r    TYPE p DECIMALS 2 VALUE 0,
           mjmoq_r    TYPE p DECIMALS 2 VALUE 0,
           mjecs_r    TYPE p DECIMALS 2 VALUE 0,
           mjvcs_r    TYPE p DECIMALS 2 VALUE 0,
           mjvrd_r    TYPE p DECIMALS 2 VALUE 0,
           mjsep_r    TYPE p DECIMALS 2 VALUE 0.
    DATA : mjmop_a    TYPE p DECIMALS 2 VALUE 0,
           mjmoq_a    TYPE p DECIMALS 2 VALUE 0,
           mjecs_a    TYPE p DECIMALS 2 VALUE 0,
           mjvcs_a    TYPE p DECIMALS 2 VALUE 0,
           mjvrd_a    TYPE p DECIMALS 2 VALUE 0,
           mjsep_a    TYPE p DECIMALS 2 VALUE 0.
    DATA  : mtitle   LIKE  t161t-batxt.
    DATA :         no_ammend(10),request_by(50),ver_txt(100),ver_reason(100),stext(200).
    begin of Email data declarations**************
    DATA: BEGIN OF otf OCCURS 0.
            INCLUDE STRUCTURE itcoo .
    DATA: END OF otf.
    DATA: itcpo LIKE itcpo.
    DATA: itcpp LIKE itcpp.
    DATA: it_docs  TYPE STANDARD TABLE OF docs,
          v_bin_filesize          TYPE i,
          it_lines TYPE STANDARD TABLE OF tline,
          wa_lines TYPE tline.
    DATA : i_pdf LIKE tline OCCURS 1000 WITH HEADER LINE,
    v_pdf_bytecount TYPE i,
    v_pdf_spoolid TYPE tsp01-rqident,
    v_otf_pagecount TYPE i,
    v_btc_jobname TYPE tbtcjob-jobname,
    v_btc_jobcount TYPE tbtcjob-jobcount.
    DATA: objpack LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE.
    DATA: objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE.
    DATA: objbin LIKE solisti1 OCCURS 0 WITH HEADER LINE.
    DATA: objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE.
    DATA: reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE.
    DATA: doc_chng LIKE sodocchgi1.
    DATA: tab_lines LIKE sy-tabix.
    DATA: vafilename(100) VALUE 'po_output.pdf'.
    DATA: jobdata TYPE sxjobdata.
    DATA arc_params TYPE arc_params.
    DATA print_params TYPE pri_params.
    DATA g_send_prog TYPE syrepid VALUE 'ZVF03_TEST_PROG'.
    DATA immediate TYPE btcchar1.
    DATA: i_jobname TYPE tbtcp-jobname,
    i_jobcount TYPE tbtcp-jobcount,
    i_jobstepcount TYPE tbtcp-stepcount.
    DATA recipient_obj LIKE swotobjid.
    CONSTANTS: sx_true TYPE sx_boolean VALUE 'X'.
    TABLES: tbtcp.
    end of Email data declarations**************
    SELECTION-SCREEN : BEGIN OF BLOCK block1 WITH FRAME TITLE text-001.
    SELECT-OPTIONS   : mebeln FOR ekko-ebeln OBLIGATORY .               " 75
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN POSITION 12.
    SELECTION-SCREEN COMMENT (20) text-b01.
    PARAMETERS: b1 AS CHECKBOX DEFAULT 'X'.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN : END OF BLOCK block1.
    SELECTION-SCREEN: BEGIN OF SCREEN 200 TITLE text-001 AS WINDOW.
    PARAMETERS :  p_email TYPE ad_smtpadr.     "E-Mail Address
    SELECTION-SCREEN: END OF SCREEN 200.
    INITIALIZATION.
      SET PF-STATUS 'ZMMPORD_STAT'.
    AT SELECTION-SCREEN.
      CASE sy-ucomm.
        WHEN 'EMAIL'.
          PERFORM zemail.
        WHEN '&IC1'.
          PERFORM load_data.
          PERFORM process.
          IF NOT p_email IS INITIAL.
            PERFORM send_mail.
          ENDIF.
      ENDCASE.
    *START-OF-SELECTION.
    PERFORM load_data.
    PERFORM process.
    FORM load_data .
      DATA : gindex LIKE sy-tabix.
      SELECT * FROM t16ct INTO TABLE it_t16ct WHERE spras = 'EN'.
      SELECT * FROM ekko INTO TABLE it_ekko WHERE ebeln IN mebeln.
      IF sy-subrc EQ 0.
        SELECT * FROM erev INTO CORRESPONDING FIELDS OF TABLE it_erev FOR ALL ENTRIES IN it_ekko
        WHERE edokn = it_ekko-ebeln AND rscod <> '' .
        SORT it_erev BY edokn revno DESCENDING.
        LOOP AT it_ekko.
          IF NOT ( it_ekko-frgke EQ 'O'  OR it_ekko-frgke EQ '0' ) .
            MESSAGE e000(zsd) WITH 'Purchase Order is not Realeased'.
          ENDIF.
        ENDLOOP.
        SELECT * FROM ekpo INTO TABLE it_ekpo WHERE ebeln IN mebeln.
        IF sy-subrc EQ 0.
          SELECT * INTO TABLE it_makt
          FROM   makt
          FOR    ALL ENTRIES IN it_ekpo
          WHERE  matnr EQ it_ekpo-matnr.
          SELECT * INTO TABLE it_lfa1
          FROM   lfa1
          FOR    ALL ENTRIES IN it_ekko
          WHERE  lifnr EQ it_ekko-lifnr.
        ENDIF.
        SELECT *
          INTO TABLE it_t052u
          FROM t052u
           FOR ALL ENTRIES IN it_ekko
         WHERE zterm EQ it_ekko-zterm
          AND  spras EQ 'EN'.
        IF sy-subrc EQ 0.
          SORT it_t052u BY zterm.
        ENDIF.
        SELECT * FROM eket INTO TABLE it_eket WHERE ebeln IN mebeln.
        IF sy-subrc EQ 0.
          SORT it_eket BY ebeln ebelp.
        ENDIF.
        SELECT  *
          INTO TABLE it_eikp
          FROM eikp
           FOR ALL ENTRIES IN it_ekko
         WHERE exnum EQ it_ekko-exnum.
        IF sy-subrc EQ 0.
          SORT it_eikp BY exnum.
          SELECT  *
            INTO TABLE it_t618t
            FROM t618t
             FOR ALL ENTRIES IN it_eikp
           WHERE expvz EQ it_eikp-expvz
             AND spras EQ 'E'
             AND land1 EQ 'IN'.
          IF sy-subrc EQ 0.
            SORT it_t618t BY expvz.
          ENDIF.
        ENDIF.
        REFRESH : it_zmm_porder.
        CLEAR   : it_zmm_porder.
        SELECT * INTO TABLE it_zmm_porder
          FROM zmm_porder
         WHERE flag EQ 'L'.
        IF sy-subrc EQ 0.
          SORT it_zmm_porder BY kschl.
        ENDIF.
        SELECT * FROM konv INTO TABLE it_konv
        FOR ALL ENTRIES IN it_ekko
        WHERE knumv = it_ekko-knumv
          AND  kwert NE 0.
        LOOP AT it_konv.
          gindex = sy-tabix.
          READ TABLE it_zmm_porder WITH KEY kschl = it_konv-kschl BINARY SEARCH.
          IF sy-subrc NE 0.
            DELETE it_konv INDEX gindex.
          ENDIF.
        ENDLOOP.
        IF sy-subrc EQ 0.
          SORT it_konv BY knumv kherk kschl.
        ENDIF.
        REFRESH : it_zmm_porder.
        CLEAR   : it_zmm_porder.
        SELECT * INTO TABLE it_zmm_porder
          FROM zmm_porder
         WHERE flag EQ 'F'.
        IF sy-subrc EQ 0.
          SORT it_zmm_porder BY kschl.
        ENDIF.
       SELECT * INTO TABLE IT_KONV_FTR FROM KONV
          FOR ALL ENTRIES IN IT_EKKO
         WHERE KNUMV = IT_EKKO-KNUMV
           AND  ( KSCHL = 'ZIN1'
              OR  KSCHL = 'ZIN2'
              OR  KSCHL = 'ZINS'
              OR  KSCHL = 'ZPF1'
              OR  KSCHL = 'ZPF2'
              OR  KSCHL = 'ZPF3'
              OR  KSCHL = 'ZPKG'
              OR  KSCHL = 'ZPKF'
              OR  KSCHL = 'FRA1'
              OR  KSCHL = 'FRB1'
              OR  KSCHL = 'FRC1'
              OR  KSCHL = 'FRD1'
              OR  KSCHL = 'FRD2'
              OR  KSCHL = 'FRD3'
              OR  KSCHL = 'FRD4'
              OR  KSCHL = 'FRD5'
    *****Added one condition type below ZFBC as on 05.06.2007 :Rajiv as per mail of Sadiq via mathew sir(RTDK906646)
              OR  KSCHL = 'ZFBC' )
           AND  KWERT NE 0
           AND  KPOSN GT '000000'.
          AND ( KRECH = 'B'                       " RTDK906167
           OR  KRECH = 'A' ).
        SELECT * INTO TABLE it_konv_ftr FROM konv
           FOR ALL ENTRIES IN it_ekko
          WHERE knumv = it_ekko-knumv
            AND  kwert NE 0
            AND  kposn GT '000000'.
        LOOP AT it_konv_ftr.
          gindex = sy-tabix.
          READ TABLE it_zmm_porder WITH KEY kschl = it_konv_ftr-kschl BINARY SEARCH.
          IF sy-subrc NE 0.
            DELETE it_konv_ftr INDEX gindex.
          ENDIF.
        ENDLOOP.
        IF it_konv_ftr[] IS NOT INITIAL.
          SORT it_konv_ftr BY knumv kschl.
        ENDIF.
       SELECT  KNUMV KSCHL INTO CORRESPONDING FIELDS OF TABLE IT_KONV1 FROM KONV
       FOR ALL ENTRIES IN IT_EKKO
       WHERE KNUMV = IT_EKKO-KNUMV
           and kherk = 'D'
         AND  ( KSCHL = 'ZIN1'
            OR  KSCHL = 'ZIN2'
            OR  KSCHL = 'ZINS'
            OR  KSCHL = 'ZPF1'
            OR  KSCHL = 'ZPF2'
            OR  KSCHL = 'ZPF3'
            OR  KSCHL = 'ZPKG'
            OR  KSCHL = 'ZPKF'
            OR  KSCHL = 'FRA1'
            OR  KSCHL = 'FRB1'
            OR  KSCHL = 'FRC1'
            OR  KSCHL = 'FRD1'
            OR  KSCHL = 'FRD2'
            OR  KSCHL = 'FRD3'
            OR  KSCHL = 'FRD4'
            OR  KSCHL = 'FRD5'
    *****Added one condition type below ZFBC as on 05.06.2007 :Rajiv as per mail of Sadiq via mathew sir(RTDK906646)
            OR  KSCHL = 'ZFBC' )
         AND  KWERT NE 0.
           AND ( KRECH = 'B'                       RTDK906167
            OR  KRECH = 'A' ).
        SELECT  knumv kschl INTO CORRESPONDING FIELDS OF TABLE it_konv1 FROM konv
        FOR ALL ENTRIES IN it_ekko
        WHERE knumv = it_ekko-knumv
          AND  kwert NE 0.
        DELETE ADJACENT DUPLICATES FROM it_konv1 COMPARING knumv kschl.
        LOOP AT it_konv1.
          gindex = sy-tabix.
          READ TABLE it_zmm_porder WITH KEY kschl = it_konv1-kschl BINARY SEARCH.
          IF sy-subrc NE 0.
            DELETE it_konv1 INDEX gindex.
          ENDIF.
        ENDLOOP.
        IF sy-subrc EQ 0.
          SORT it_konv1 BY knumv kschl.
        ENDIF.
        SELECT * INTO TABLE it_t685t
        FROM   t685t
        FOR    ALL ENTRIES IN it_konv
        WHERE  kschl EQ it_konv-kschl
          AND  kappl EQ it_konv-kappl
          AND  spras EQ 'E'.
        SELECT * INTO TABLE it_t685t_ftr
        FROM   t685t
        FOR    ALL ENTRIES IN it_konv_ftr
        WHERE  kschl EQ it_konv_ftr-kschl
          AND  kappl EQ it_konv_ftr-kappl
          AND  spras EQ 'E'.
        it_t685t_ftr-kschl = 'JVCS'.
        it_t685t_ftr-vtext = 'IN CST in vat'.
        APPEND it_t685t_ftr.
        SELECT * INTO TABLE it_zmm_house_bank
          FROM zmm_house_bank
         WHERE ebeln IN mebeln.
      ELSE.
        MESSAGE e899(mm) WITH 'Data not found for selection criteria...'.
      ENDIF.
    ENDFORM.                    " Load_data
    FORM process .
      DATA : mctr   TYPE i VALUE 1.
      DATA : gindex LIKE sy-tabix.
      DATA : mline(75) TYPE c.
      DATA : mlifn2    LIKE ekpa-lifn2.
      DATA :  mv_name LIKE lfa1-name1,
             madrnr  LIKE lfa1-adrnr.
      CLEAR itcpo.
      itcpo-tdgetotf = 'X'.
      CALL FUNCTION 'OPEN_FORM'
        EXPORTING
          form     = 'ZMM_PORDER'
          language = sy-langu
          OPTIONS  = itcpo
          dialog   = ' '
        EXCEPTIONS
          OTHERS   = 1.
      LOOP AT it_ekko.
        CALL FUNCTION 'START_FORM'
          EXPORTING
            form = 'ZMM_PORDER'.
        SELECT SINGLE *
         FROM  t001
         INTO  it_t001
        WHERE  bukrs EQ it_ekko-bukrs.
        mcompname = it_t001-butxt.
        TRANSLATE mcompname TO UPPER CASE.
        Document Type
        SELECT SINGLE batxt
          INTO mtitle
          FROM t161t
         WHERE bstyp EQ 'F'
         AND   spras EQ 'E'
         AND   bsart EQ it_ekko-bsart.
        REFRESH it_adrc.
        SELECT SINGLE werks
          INTO mwerks
          FROM ekpo
         WHERE ebeln EQ it_ekko-ebeln.
        SELECT SINGLE *
          INTO it_t001w
          FROM t001w
         WHERE werks EQ mwerks.
        REFRESH it_adrc.
        SELECT SINGLE *
          INTO it_adrc_plt
          FROM adrc
         WHERE addrnumber EQ it_t001w-adrnr.
        REFRESH : xt052.
        mfamt  = 0.
        msr    = 0.
    in 500c this statement failed.
       SELECT SINGLE * FROM T052 INTO XT052 WHERE ZTERM = IT_EKKO-ZTERM.
       CALL FUNCTION 'FI_TEXT_ZTERM'
         EXPORTING
           I_T052  = XT052
         TABLES
           T_ZTEXT = ZTEXT.
        As per Preeti... Shipment address should be shown on top as purchase order company address. 27.04.
        PERFORM writeform USING 'PLANT' 'PLANT'.
        SELECT  SINGLE name1 adrnr
          INTO  (mv_name,madrnr)
          FROM  lfa1
         WHERE  lifnr EQ it_ekko-lifnr.
        REFRESH it_adrc[].
        CLEAR   it_adrc[].
        FREE it_adrc[].
        SELECT SINGLE *
          INTO it_adrc_ven
          FROM adrc
         WHERE addrnumber EQ madrnr.
        READ TABLE it_lfa1 WITH KEY lifnr = it_ekko-lifnr.
        PERFORM writeform USING 'VENDOR' 'VENDOR'.
         Shipment
        SELECT SINGLE werks
          INTO mwerks
          FROM ekpo
         WHERE ebeln EQ it_ekko-ebeln.
           up to 1 rows.
        SELECT SINGLE *
          INTO it_t001w
          FROM t001w
         WHERE werks EQ mwerks.
        SELECT SINGLE j_1iexcd j_1icstno j_1ilstno
                 INTO (j_1iexcd,j_1icstno,j_1ilstno)
               FROM    j_1imocomp
                WHERE  werks  = mwerks.
        REFRESH it_adrc.
        SELECT SINGLE *
          INTO it_adrc
          FROM adrc
         WHERE addrnumber EQ it_t001w-adrnr.
        PERFORM writeform USING 'SHIPMNT' 'SHIPMNT'.
        READ TABLE it_eikp WITH KEY exnum = it_ekko-exnum.
        IF sy-subrc EQ 0.
          READ TABLE it_t618t WITH KEY expvz = it_eikp-expvz.
        ENDIF.
        your_ref = it_ekko-ihrez.
        our_ref  = it_ekko-unsez.
        READ TABLE it_erev WITH KEY edokn = it_ekko-ebeln.
        IF sy-subrc = 0.
          no_ammend  = it_erev-revno.
          request_by = it_erev-crnam.
          ver_txt    = it_erev-txz01.
          READ TABLE it_t16ct WITH KEY rscod = it_erev-rscod.
          IF sy-subrc = 0.
            ver_reason = it_t16ct-rstxt.
          ELSE.
            ver_reason = ''.
          ENDIF.
        ELSE.
          no_ammend  = ''.
          request_by = ''.
          ver_txt    = ''.
          ver_reason = ''.
        ENDIF.
        PERFORM writeform USING 'PO_INFO' 'PO_INFO'.
        IF it_zmm_house_bank[] IS NOT INITIAL.
          READ TABLE it_zmm_house_bank INDEX 1.
          PERFORM writeform USING 'BANKDTL' 'BANKDTL'.
        ENDIF.
        PERFORM writeform USING 'HDR_INFO' 'HDR_INFO'.
        PERFORM writeform USING 'BRK_TTL' 'MAIN'.
        msr     = 1.
        mlctr   = 1.
    *added by ganesh to prevent deleted items to appear in print out
       LOOP AT IT_EKPO WHERE EBELN EQ IT_EKKO-EBELN.
        LOOP AT it_ekpo WHERE ebeln EQ it_ekko-ebeln AND loekz NE 'L'.
    *end of change
          CLEAR: mrate, mrate1.
          SELECT * FROM konv INTO TABLE it_konv_rate
                   WHERE knumv EQ it_ekko-knumv
                   AND   kposn EQ it_ekpo-ebelp
                   AND  ( kschl EQ 'PBXX' OR kschl EQ 'PB00'  OR kschl EQ 'P001' ).
          LOOP AT it_konv_rate.
           IF it_konv_rate-kpein > 0.             " added by ganesh as per sudhir 12.10.2007
             mrate_gm = it_konv_rate-kbetr / it_konv_rate-kpein.
             mrate  = mrate + mrate_gm. " added by ganesh as per sudhir 12.10.2007
           ELSE.
            mrate  = mrate + it_konv_rate-kbetr.
           ENDIF.
            IF it_konv_rate-waers IS NOT INITIAL.
              mwaers = it_konv_rate-waers.
            ENDIF.
          ENDLOOP.
        For Japanies Yen   "RTDK906759
          IF it_ekko-waers = 'JPY'.
            mrate = mrate * 100.
          ENDIF.
        End for japanies Yen
          mrate1 = mrate.
               End rate
          mfirst  = 0.
                MFAMT  = MFAMT + ( IT_EKPO-NETPR * IT_EKPO-MENGE ).
          mfamt  = mfamt + ( mrate * it_ekpo-menge ).
          PERFORM get_mat_long_text.
          DATA: lt_ctr TYPE i VALUE 0,lt_ctr1 TYPE i, lt_count TYPE i VALUE 0. " Long text counter
          DESCRIBE TABLE it_bapi_mltx_ga LINES lt_count.
          CLEAR it_bapi_mltx_ga.
    *Added by Rajiv 10.05.2007 Read and if condition RTDK906165
          READ TABLE it_konv WITH KEY knumv = it_ekko-knumv
                                      kposn = it_ekpo-ebelp.
          mkbetr  = 0.
          mkwert  = 0.
          IF sy-subrc EQ 0.
            LOOP AT it_konv  WHERE knumv EQ it_ekko-knumv
                               AND kposn EQ it_ekpo-ebelp.
              IF it_konv-krech EQ 'A'.
                mkbetr  = it_konv-kbetr / 10.
              ELSE.
                mkbetr  = it_konv-kbetr.
              ENDIF.
            For Japanies Yen "RTDK906759
              IF it_ekko-waers = 'JPY'.
                mkbetr = mkbetr * 100.
              ENDIF.
            End for japaies Yen
              IF mkbetr LT '0'.
                mkbetr = mkbetr * ( -1 ).
              ENDIF.
              mkwert   = it_konv-kwert.
            For Japanies Yen "RTDK906759
              IF it_ekko-waers = 'JPY'.
                mkwert = mkwert * 100.
              ENDIF.
            End for japaies Yen
              mfamt  = mfamt + mkwert.
              IF mkwert LT '0'.
                mkwert = mkwert * ( -1 ).
              ENDIF.
              IF it_ekpo-matnr IS INITIAL.
                itemname = it_ekpo-txz01.
              ELSE.
                READ TABLE it_makt  WITH KEY matnr = it_ekpo-matnr.
                itemname = it_makt-maktx.
              ENDIF.
              READ TABLE it_t685t WITH KEY kschl = it_konv-kschl BINARY SEARCH.
              READ TABLE it_eket  WITH KEY ebeln = it_ekpo-ebeln
                                           ebelp = it_ekpo-ebelp BINARY SEARCH.
              IF mfirst EQ 0.
                PERFORM writeform USING 'BRK_INFO' 'MAIN'.
                mfirst = 1.
              ELSE.
                ADD 1 TO lt_ctr.
                CLEAR it_bapi_mltx_ga.
                READ  TABLE it_bapi_mltx_ga INDEX lt_ctr. "For long text
                IF sy-subrc NE 0.
                  CLEAR it_bapi_mltx_ga.
                ENDIF.
                PERFORM writeform USING 'BRK_INFO1' 'MAIN'.
              ENDIF.
              mlctr = mlctr + 1.
            ENDLOOP.               "   it_konv.
          ELSE.
            IF it_ekpo-matnr IS INITIAL.
              itemname = it_ekpo-txz01.
            ELSE.
              READ TABLE it_makt  WITH KEY matnr = it_ekpo-matnr.
              itemname = it_makt-maktx.
            ENDIF.
                        READ TABLE IT_T685T WITH KEY KSCHL = IT_KONV-KSCHL BINARY SEARCH.
            READ TABLE it_eket  WITH KEY ebeln = it_ekpo-ebeln
                                         ebelp = it_ekpo-ebelp BINARY SEARCH.
            mfirst = 0.
            IF mfirst EQ 0.
              PERFORM writeform USING 'BRK_INFO' 'MAIN'.
              mfirst = 1.
            ELSE.
              ADD 1 TO lt_ctr.
              CLEAR it_bapi_mltx_ga.
              READ  TABLE it_bapi_mltx_ga INDEX lt_ctr. "For long text
              IF sy-subrc NE 0.CLEAR it_bapi_mltx_ga.ENDIF.
              PERFORM writeform USING 'BRK_INFO1' 'MAIN'.
            ENDIF.
          ENDIF.
    *Commented by rajiv 10.05.2007 used this code in above condition.
    added by ganesh on 260407 to print record
                if it_konv is initial.
                        READ TABLE IT_MAKT  WITH KEY MATNR = IT_EKPO-MATNR.
                        READ TABLE IT_T685T WITH KEY KSCHL = IT_KONV-KSCHL BINARY SEARCH.
                        READ TABLE IT_EKET  WITH KEY EBELN = IT_EKPO-EBELN
                                                     EBELP = IT_EKPO-EBELP BINARY SEARCH.
                        mFirst = 0.
                        if mFirst eq 0.
                             PERFORM WRITEFORM USING 'BRK_INFO' 'MAIN'.
                             mFirst = 1.
                        else.
                             add 1 to lt_ctr.
                             clear it_bapi_mltx_ga.
                             read  table IT_BAPI_MLTX_GA index lt_ctr. "For long text
                             if sy-subrc ne 0.clear it_bapi_mltx_ga.endif.
                             PERFORM WRITEFORM USING 'BRK_INFO1' 'MAIN'.
                        Endif.
                endif.
    end of change
          REFRESH it_komv_tax.
          PERFORM get_tax_cal USING it_ekpo-ebeln
                                    it_ekpo-ebelp.
                                 Changing it_komv_tax.
          REFRESH : it_zmm_porder.
          CLEAR   : it_zmm_porder.
          SELECT * INTO TABLE it_zmm_porder
            FROM zmm_porder
           WHERE flag EQ 'T'.
          IF sy-subrc EQ 0.
            SORT it_zmm_porder BY kschl.
          ENDIF.
          LOOP AT it_komv_tax.
            gindex = sy-tabix.
            READ TABLE it_zmm_porder WITH KEY kschl = it_komv_tax-kschl BINARY SEARCH.
            IF sy-subrc NE 0.
              DELETE it_komv_tax INDEX gindex.
            ENDIF.
          ENDLOOP.
          LOOP AT it_komv_tax WHERE kwert IS NOT INITIAL.
           IF ( IT_KOMV_TAX-KSCHL EQ 'JMOP' OR
                IT_KOMV_TAX-KSCHL EQ 'JECS' OR
                IT_KOMV_TAX-KSCHL EQ 'JSEP' OR
                IT_KOMV_TAX-KSCHL EQ 'JMOQ' OR
                IT_KOMV_TAX-KSCHL EQ 'JVCS' OR
                IT_KOMV_TAX-KSCHL EQ 'JVRD' OR
                IT_KOMV_TAX-KSCHL EQ 'JMIP' OR
    *             IT_KOMV_TAX-KSCHL EQ 'JEIP' OR
                IT_KOMV_TAX-KSCHL EQ 'JSEI' OR
                IT_KOMV_TAX-KSCHL EQ 'JSRT' OR
                IT_KOMV_TAX-KSCHL EQ 'JEC3' OR
                IT_KOMV_TAX-KSCHL EQ 'JVRN' )
                AND IT_KOMV_TAX-KWERT IS NOT INITIAL.
            SELECT SINGLE vtext
                   INTO   mtext
                   FROM   t685t
                  WHERE   kschl EQ it_komv_tax-kschl
                    AND   spras EQ 'E'.
            l_rate    = it_komv_tax-kbetr / 10.
            l_amt     = it_komv_tax-kwert.
            For Japanies Yen "RTDK906759
            IF it_ekko-waers = 'JPY'.
              l_amt = l_amt * 100.
            ENDIF.
            End for japaies Yen
            ADD l_amt TO mfamt.
            IF lt_ctr LT lt_count. "Long text
              ADD 1 TO lt_ctr.
              READ TABLE it_bapi_mltx_ga INDEX lt_ctr.
            ELSE.
              CLEAR it_bapi_mltx_ga.
            ENDIF.
            IF l_rate EQ 0 OR l_amt EQ 0.
              l_rate = ''.
              l_amt  = ''.
            ENDIF.
            PERFORM writeform USING 'TAX_LINE_ITEM' 'MAIN'.
           ENDIF.
          ENDLOOP.
          IF lt_ctr LT lt_count.
            DATA mbal_line TYPE i.
            mbal_line = ( lt_count - lt_ctr ).
            DO mbal_line TIMES.
              ADD 1 TO lt_ctr.
              READ TABLE it_bapi_mltx_ga INDEX lt_ctr.
              IF sy-subrc = 0.
                PERFORM writeform USING 'LTEXT' 'MAIN'.
              ENDIF.
            ENDDO.
          ENDIF.
          CONCATENATE it_ekko-ebeln it_ekpo-ebelp INTO nmebeln.
          REFRESH tline.
          CALL FUNCTION 'READ_TEXT'
            EXPORTING
              id                      = 'F04'
              language                = sy-langu
              name                    = nmebeln
              object                  = 'EKPO'
            TABLES
              lines                   = tline
            EXCEPTIONS
              id                      = 1
              language                = 2
              name                    = 3
              not_found               = 4
              object                  = 5
              reference_check         = 6
              wrong_access_to_archive = 7
              OTHERS                  = 8.
          IF sy-subrc <> 0.
          ENDIF.
          LOOP AT tline.
            IF tline-tdline IS NOT INITIAL.
              del_text = tline-tdline.
            ENDIF.
            CONDENSE del_text.
          ENDLOOP.
          CONCATENATE it_ekko-ebeln it_ekpo-ebelp INTO nmebeln.
          REFRESH tline.
          CALL FUNCTION 'READ_TEXT'
            EXPORTING
              id                      = 'F03'
              language                = sy-langu
              name                    = nmebeln
              object                  = 'EKPO'
            TABLES
              lines                   = tline
            EXCEPTIONS
              id                      = 1
              language                = 2
              name                    = 3
              not_found               = 4
              object                  = 5
              reference_check         = 6
              wrong_access_to_archive = 7
              OTHERS                  = 8.
          IF sy-subrc <> 0.
                 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
          ENDIF.
               refresh.
          CLEAR : po_flag, mat_po_text.
          LOOP AT tline.
            IF tline-tdline IS NOT INITIAL.
              MOVE tline-tdline TO mat_po_text.
              CONDENSE mat_po_text.
              PERFORM writeform USING 'MTRL_PO_TEXT' 'MAIN'.
              po_flag = 'X'.
              CLEAR : mat_po_text.
            ENDIF.
          ENDLOOP.
    *Added lines below for Schedule delivery for line item on 09.05.2007:Rajiv
          CLEAR g_ind.
          READ TABLE it_eket  WITH KEY ebeln = it_ekpo-ebeln
                                       ebelp = it_ekpo-ebelp BINARY SEARCH.
          g_ind = sy-tabix.
          LOOP AT it_eket FROM g_ind.
            IF it_eket-ebeln EQ it_ekpo-ebeln AND it_eket-ebelp = it_ekpo-ebelp.
              PERFORM writeform USING 'SCHEDULE' 'MAIN'.
            ELSE.
              EXIT.
            ENDIF.
          ENDLOOP.
    *End Addition:Rajiv
          PERFORM writeform USING 'REQSLP' 'MAIN'.
          mlctr = mlctr + 1.
          msr = msr + 1.
          CLEAR: lt_ctr, lt_ctr1.
      following lines added by ganesh to add service po details as per Mr. sadiq 21.08.2007
          IF it_ekpo-packno IS NOT INITIAL.
            CLEAR sub_packno.
            SELECT SINGLE sub_packno INTO sub_packno FROM esll WHERE packno = it_ekpo-packno.
            IF sub_packno IS NOT INITIAL.
              CLEAR it_esll.
              REFRESH it_esll.
              SELECT * FROM esll INTO CORRESPONDING FIELDS OF TABLE it_esll
              WHERE packno = sub_packno.
              IF sy-subrc = 0.
                PERFORM writeform USING 'SERVICE_PO_TEXT' 'MAIN'.
              ENDIF.
              LOOP AT it_esll.
                CONCATENATE sub_packno it_esll-introw INTO obj.
                CALL FUNCTION 'READ_TEXT'   "4500002446  C300
                  EXPORTING
                    id       = 'LTXT'
                    language = sy-langu
                    name     = obj
                    object   = 'ESLL'
                  TABLES
                    lines    = tline
                  EXCEPTIONS
                    id                      = 1
                    language                = 2
                    name                    = 3
                    not_found               = 4
                    object                  = 5
                    reference_check         = 6
                    wrong_access_to_archive = 7
                    OTHERS                  = 8.
                IF sy-subrc <> 0.
                ENDIF.
                CLEAR stext.
                LOOP AT tline.
                  CONCATENATE stext tline-tdline  INTO stext SEPARATED BY space.
                ENDLOOP.
                FREE tline.
                CLEAR tline.
                REFRESH tline.
                PERFORM writeform USING 'SERVICE_PO' 'MAIN'.
                PERFORM writeform USING 'SERVICE_TEXT' 'MAIN'.
              ENDLOOP.
            ENDIF.
          ENDIF.
        end of change
        ENDLOOP.             " it_ekpo.
        IF mlctr < 15.
          DO 5 TIMES.
            PERFORM writeform USING 'LINEFEED' 'MAIN'.
          ENDDO.
        ENDIF.
        added by ganesh  for allding line before ECC No.
        IF it_ekko-bsart NE 'ZIM'.               " IF EXPORT NO NEED TO PRINT ECC.
          PERFORM writeform USING 'LIN' 'MAIN'.
          PERFORM writeform USING 'WERKS_TAX_DETAIL' 'MAIN'.
        ENDIF.
        end of change
         MFLAG = 'Y'.
        PERFORM writeform USING 'TERMS_VAL' 'MAIN'.
        LOOP AT it_konv1 WHERE knumv EQ it_ekko-knumv.
          mkschl = it_konv1-kschl.
          mchgamt = 0.
          LOOP AT it_konv_ftr  WHERE knumv EQ it_konv1-knumv
                               AND kschl EQ mkschl.
            mchgamt = mchgamt + it_konv_ftr-kwert.
          ENDLOOP.
            For Japanies Yen "RTDK906759
          IF it_ekko-waers = 'JPY'.
            mchgamt = mchgamt * 100.
          ENDIF.
            End for japaies Yen
          mfamt = mfamt + mchgamt.
          IF mchgamt LT '0'.
            mchgamt = mchgamt * ( -1 ).
          ENDIF.
          READ TABLE it_t685t_ftr WITH KEY kschl = mkschl.
          PERFORM writeform USING 'TERMS_FTR_VAL' 'MAIN'.
          mlctr = mlctr + 1.
        ENDLOOP.
        mflag = 'T'.
        CALL FUNCTION 'HR_IN_CHG_INR_WRDS'
          EXPORTING
            amt_in_num         = mfamt
          IMPORTING
            amt_in_words       = mfword
          EXCEPTIONS
            data_type_mismatch = 1
            OTHERS             = 2.
        CONDENSE mebeln.
        nmebeln = it_ekko-ebeln.
        REFRESH tline.
        CALL FUNCTION 'READ_TEXT'
          EXPORTING
            id                      = 'F01'
            language                = sy-langu
            name                    = nmebeln
            object                  = 'EKKO'
          TABLES
            lines                   = tline
          EXCEPTIONS
            id                      = 1
            language                = 2
            name                    = 3
            not_found               = 4
            object                  = 5
            reference_check         = 6
            wrong_access_to_archive = 7
            OTHERS                  = 8.
        IF sy-subrc <> 0.
        ENDIF.
    *---- CHANGED BY MATHEW BECAUSE THIS STATMENT WORKING FINE IN 300 BUT NOT IN 500C.
       LOOP AT ZTEXT.
         IF ZTEXT-TEXT1 IS NOT INITIAL.
           PERFORM WRITEFORM USING 'TERMS_COND_VAL_PAY' 'MAIN'.
         ENDIF.
         MPAY_FLAG = 'Y'.
       ENDLOOP.
        READ TABLE it_t052u WITH KEY zterm = it_ekko-zterm.
        LOOP AT it_t052u WHERE zterm EQ it_ekko-zterm.
          IF it_t052u-text1 IS NOT INITIAL.
            PERFORM writeform USING 'TERMS_COND_VAL_PAY' 'MAIN'.
          ENDIF.
          mpay_flag = 'Y'.
        ENDLOOP.
        PERFORM writeform USING 'TERMS_COND_VAL' 'MAIN'.
        LOOP AT tline.
          IF tline-tdline IS NOT INITIAL.
            PERFORM writeform USING 'TERMS_COND_VAL_HDR' 'MAIN'.
          ENDIF.
          CONDENSE txt.
        ENDLOOP.
        PERFORM writeform USING 'FTR' 'FTR_LIN3'.
        PERFORM writeform USING 'FTR_LIN1' 'FTR_LIN1'.
        CALL FUNCTION 'END_FORM'.
      ENDLOOP.                    "   It_ekko.
      CALL FUNCTION 'CLOSE_FORM'
       IMPORTING
       RESULT                         = itcpp
      RDI_RESULT                     =
       TABLES
         otfdata                        = otf
       EXCEPTIONS
         unopened                       = 1
         bad_pageformat_for_print       = 2
         send_error                     = 3
         spool_error                    = 4
         codepage                       = 5
         OTHERS                         = 6.
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.                    " Process
    *&      Form  WRITEFORM
          text
         -->P_0150   text
         -->P_0151   text
    FORM writeform  USING    value(p_0150)
                             value(p_0151).
      CALL FUNCTION 'WRITE_FORM'

    Hi
    I think some basis related configuartions to be done
    Try like this and inform me
    A cyclic job runs, which processes the messages seen in the SOST queue.
    Are you sure it's not the frequency of the cyclic job, rather than the
    number of messages in the queue, that you are observing? In messages
    that are queued and before the cyclic job runs, "wait for comm. service"
    is the normal status.
    If you mean that there are always 4 items queued in SOST regardless of
    the cyclic send job, then I have no ideas. I would have thought there
    was no way to do that.
    when the send job runs it just never
    picks them up & sends them, while it picks up many others. The send job
    is somehow blind to these; no error message occurs. In this case, I
    'delete' them from the queue (in SOST) and then 'undelete' (drop down
    menu -> /Go to /Deleted Items) them and then re-queue them. THEN they
    actually get picked up & sent when the next cyclic send job executes.
    Regards
    Pavan

  • Problem in output of project in mp3 format

    Hi
    I recently completed the arrangement of a 2:50 mins music project. When I exported its audio mixdown in WAV format, the ouput was perfect. However, when I am exporting the output in mp3 or wma format, the length strangely increases to 5:40 mins and the tempo of the music obviously becomes extremely slow. When I tried to convert the WAV output into mp3 by a free MP3 converter, all I could get was disturbance.
    Please help me out of this strange problem!

    What operating system?
    What version of Premiere Pro? Have you updated to Premiere Pro CS5 (5.0.2)? That update fixes a lot of problems.

  • How to  send ALV output data into Excel sheet format via Mail to the user?

    Hi friends,
    I have a doubt ie,
    How to  send ALV output data into Excel sheet format via Mail to the user?
    regards
    Moosa

    Hi,
    Provide the output internal table to the objbin in the below FM
    Send Message
      CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
           EXPORTING
                document_data              = i_docdata
                put_in_outbox              = c_x
           TABLES
                packing_list               = i_objpack
                object_header              = i_objhead
                contents_bin               = i_objbin
                contents_txt               = i_objtxt
                receivers                  = i_reclist
    and specify the document type
      i_objpack-doc_type   = 'XLS'.
    and try.
    Regards,
    Nandha

  • How to send output of smartform in pdf format as an attachment to email

    how to send output of smartform in pdf format as an attachment to email
    search before posting further and follow Forum rules
    Edited by: Vijay Babu Dudla on Jan 15, 2009 4:50 AM

    Did u check on sdn?
    i dont think so or else there are many posts on this topic and good wikis too.
    look at one of these code tutorial wiki
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/mail%2bsend%2bthrough%2boutput%2bcontrols
    So next time do use the search functionality.
    кu03B1ятu03B9к
    Edited by: kartik tarla on Jan 15, 2009 12:33 PM

  • PO output with XML and PDF format

    Hi All,
    I need PO output with XML and PDF format. when I give print it shld go to vendor with xml and pdf format through mail. please kindly guide me on this .
    Thanks in advance
    JK

    hi,
    try this code to get in pdf form
    REPORT zsuresh_test.
    Variable declarations
    DATA:
    w_form_name TYPE tdsfname VALUE 'ZSURESH_TEST',
    w_fmodule TYPE rs38l_fnam,
    w_cparam TYPE ssfctrlop,
    w_outoptions TYPE ssfcompop,
    W_bin_filesize TYPE i, " Binary File Size
    w_FILE_NAME type string,
    w_File_path type string,
    w_FULL_PATH type string.
    Internal tables declaration
    Internal table to hold the OTF data
    DATA:
    t_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
    Internal table to hold OTF data recd from the SMARTFORM
    t_otf_from_fm TYPE ssfcrescl,
    Internal table to hold the data from the FM CONVERT_OTF
    T_pdf_tab LIKE tline OCCURS 0 WITH HEADER LINE.
    This function module call is used to retrieve the name of the Function
    module generated when the SMARTFORM is activated
    CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
    formname = w_form_name
    VARIANT = ' '
    DIRECT_CALL = ' '
    IMPORTING
    fm_name = w_fmodule
    EXCEPTIONS
    no_form = 1
    no_function_module = 2
    OTHERS = 3
    IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    Calling the SMARTFORM using the function module retrieved above
    GET_OTF parameter in the CONTROL_PARAMETERS is set to get the OTF
    format of the output
    w_cparam-no_dialog = 'X'.
    w_cparam-preview = space. " Suppressing the dialog box
                                                        " for print preview
    w_cparam-getotf = 'X'.
    Printer name to be used is provided in the export parameter
    OUTPUT_OPTIONS
    w_outoptions-tddest = 'LP01'.
    CALL FUNCTION w_fmodule
    EXPORTING
    ARCHIVE_INDEX =
    ARCHIVE_INDEX_TAB =
    ARCHIVE_PARAMETERS =
    control_parameters = w_cparam
    MAIL_APPL_OBJ =
    MAIL_RECIPIENT =
    MAIL_SENDER =
    output_options = w_outoptions
    USER_SETTINGS = 'X'
    IMPORTING
    DOCUMENT_OUTPUT_INFO =
    job_output_info = t_otf_from_fm
    JOB_OUTPUT_OPTIONS =
    EXCEPTIONS
    formatting_error = 1
    internal_error = 2
    send_error = 3
    user_canceled = 4
    OTHERS = 5
    IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    t_otf[] = t_otf_from_fm-otfdata[].
    Function Module CONVERT_OTF is used to convert the OTF format to PDF
    CALL FUNCTION 'CONVERT_OTF'
    EXPORTING
    FORMAT = 'PDF'
    MAX_LINEWIDTH = 132
    ARCHIVE_INDEX = ' '
    COPYNUMBER = 0
    ASCII_BIDI_VIS2LOG = ' '
    PDF_DELETE_OTFTAB = ' '
    IMPORTING
    BIN_FILESIZE = W_bin_filesize
    BIN_FILE =
    TABLES
    otf = T_OTF
    lines = T_pdf_tab
    EXCEPTIONS
    ERR_MAX_LINEWIDTH = 1
    ERR_FORMAT = 2
    ERR_CONV_NOT_POSSIBLE = 3
    ERR_BAD_OTF = 4
    OTHERS = 5
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    To display File SAVE dialog window
    CALL METHOD cl_gui_frontend_services=>file_save_dialog
    EXPORTING
    WINDOW_TITLE =
    DEFAULT_EXTENSION =
    DEFAULT_FILE_NAME =
    FILE_FILTER =
    INITIAL_DIRECTORY =
    WITH_ENCODING =
    PROMPT_ON_OVERWRITE = 'X'
    CHANGING
    filename = w_FILE_NAME
    path = w_FILE_PATH
    fullpath = w_FULL_PATH
    USER_ACTION =
    FILE_ENCODING =
    EXCEPTIONS
    CNTL_ERROR = 1
    ERROR_NO_GUI = 2
    NOT_SUPPORTED_BY_GUI = 3
    others = 4
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    Use the FM GUI_DOWNLOAD to download the generated PDF file onto the
    presentation server
    CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
    BIN_FILESIZE = W_bin_filesize
    filename = w_FULL_PATH
    FILETYPE = 'BIN'
    APPEND = ' '
    WRITE_FIELD_SEPARATOR = ' '
    HEADER = '00'
    TRUNC_TRAILING_BLANKS = ' '
    WRITE_LF = 'X'
    COL_SELECT = ' '
    COL_SELECT_MASK = ' '
    DAT_MODE = ' '
    CONFIRM_OVERWRITE = ' '
    NO_AUTH_CHECK = ' '
    CODEPAGE = ' '
    IGNORE_CERR = ABAP_TRUE
    REPLACEMENT = '#'
    WRITE_BOM = ' '
    TRUNC_TRAILING_BLANKS_EOL = 'X'
    WK1_N_FORMAT = ' '
    WK1_N_SIZE = ' '
    WK1_T_FORMAT = ' '
    WK1_T_SIZE = ' '
    IMPORTING
    FILELENGTH =
    tables
    data_tab = T_pdf_tab
    FIELDNAMES =
    EXCEPTIONS
    FILE_WRITE_ERROR = 1
    NO_BATCH = 2
    GUI_REFUSE_FILETRANSFER = 3
    INVALID_TYPE = 4
    NO_AUTHORITY = 5
    UNKNOWN_ERROR = 6
    HEADER_NOT_ALLOWED = 7
    SEPARATOR_NOT_ALLOWED = 8
    FILESIZE_NOT_ALLOWED = 9
    HEADER_TOO_LONG = 10
    DP_ERROR_CREATE = 11
    DP_ERROR_SEND = 12
    DP_ERROR_WRITE = 13
    UNKNOWN_DP_ERROR = 14
    ACCESS_DENIED = 15
    DP_OUT_OF_MEMORY = 16
    DISK_FULL = 17
    DP_TIMEOUT = 18
    FILE_NOT_FOUND = 19
    DATAPROVIDER_EXCEPTION = 20
    CONTROL_FLUSH_ERROR = 21
    OTHERS = 22
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    reward points if useful,
    siri

  • Can you output iphoto slideshows in video formats?

    Can you output iphoto slideshows in video formats?  If so, which video formats?  Is output in H.264 format with 4:3 aspect ratio possible?  Thanks.

    If you set the aspect ratio to 4:3 in iPhoto
    you can use the Export button at the bottom of the slideshow window and pick one of the sizes you'd like.
    That will give you this format:
    If you want to do more customization of the output follow Terence's export method.
    OT

  • Outputting files to postscript and formatted Excel

    I have a requirement where I need to output XML content in postscript format. I also want a simultaneous ability to be able to export the same document into Excel where each page of the document/report becomes a separate worksheet.
    I have two questions.
    (1) Can I accomplish this using xml publisher
    (2) If the answer to (1) is a yes, I'd like to understand the mechanics a bit more in detail. I assume that I'd need two separate template files one for the postscript document and the other for the Excel formatted output.
    Has anyone gone down this route successfully? Pl give input on how you set this up.
    Thanks.
    Arjun Khanna.

    Here's the error messages on the package that prompted this post:
    TITLE: Package Validation Error
    Package Validation Error
    ADDITIONAL INFORMATION:
    Error at Data Flow Task [Excel Source [1]]: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80040E37.
    Error at Data Flow Task [Excel Source [1]]: Opening a rowset for "Summary$" failed. Check that the object exists in the database.
    Error at Data Flow Task [SSIS.Pipeline]: "component "Excel Source" (1)" failed validation and returned validation status "VS_ISBROKEN".
    Error at Data Flow Task [SSIS.Pipeline]: One or more component failed validation.
    Error at Data Flow Task: There were errors during task validation.
     (Microsoft.DataTransformationServices.VsIntegration)
    BUTTONS:
    OK

  • Output of Report 6i (.PDF format to .TXT)

    Using 3 tire application it is generating output in .PDF format which takes lot of time in printing as graphics.
    I would like to convert .PDF format to .TXT format so that I can print on Dotmatrix printer with speed.
    Your suggession in converting .PDF to .TXT would be highly appriciated

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by AjayBhatt:
    Using 3 tire application it is generating output in .PDF format which takes lot of time in printing as graphics.
    I would like to convert .PDF format to .TXT format so that I can print on Dotmatrix printer with speed.
    Your suggession in converting .PDF to .TXT would be highly appriciated<HR></BLOCKQUOTE>
    null

  • Unable to Generate Printed Documentation in PDF Format

    This past week I started having a consistent error when attempting to generate a Printed Documentation layout. This error reads "Internal error encountered,  Failed to generate Printed Documentation."  Prior Printed Documentation builds on this same project completed fine. Nothing was done to the Help project between the times when this worked and when it no longer was able to create Printed Documentation.
    I receive this error even if I generate an entirely new "blank project" build, and then attempt to create a Printed Documentation build from this new blank project.  Researching this error, I see this has been a reoccuring problem with this product for some time. The few threads that list the problem as having been "fixed" provide resolution steps that have not worked in my case. Right now I am waiting for our IT Helpdesk people to re-install the Suite. Hopefully this will resolve this problem.
    Additional information on this problem - PDF Printed Documentation is failing - the HTML build works fine. If I select just a .DOC Printed Documentation output, this also works correctly. The resulting Word document looks good, although hyperlinks do not work within this Word document. I have reloaded Office 2003 as a troubleshooting effort, but this has nbot resulted in any change in symptoms.
    The entire error text is enclosed below, although several other people have also done this in past entries. The few lines that read "Warning, and then report a style issue is NOT the problem here. As stated earlier, when I do this same Printed Documentation build on an entirely new "blank project" it does not work, and the Output text in that case does not contain any such "Warnings" about Styles.
    Error text below:
    Starting to build Printed Documentation...
    Printed Documentation processor 8.0.1.204
    Building C:\Documents and Settings\tcleary\My Documents\My RoboHelp Projects\Adobe RoboHelp 8\10515-0366-5004_7800v-hh rsp\!SSL!\Printed_Documentation.doc ...
    Preparing to create Printed Documentation...
    Clearing output folder...
    Preparing files for Print Document...
    Copying files...
    Updating files...
    Finished preparing in 2 seconds.
    Preparing environment...
    Printed Document Generator Environment: Word 11.0.8313,  OS 5.1.2600, RAM 2048 M Bytes
    Building Printed Documentation 'Printed Documentation'...
    Building Single Document 'Printed_Documentation.doc'...
    Building 'RF-7800V-HH About this Help'...
    Building 'Table of Contents'...
    Preparing to build chapters...
    Building 'RF-7800V-HH Help and Support'...
    Processing 'RF-7800V-HH Welcome'...
    Building 'RF-7800V-HH RSP Help'...
    Processing 'RF-7800V-HH Station Information'...
    Building 'RF-7800V-HH Features'...
    Processing 'RF-7800V-HH Features'...
    Processing 'RF-7800V-HH Anc. Connector Mode'...
    Processing 'RF-7800V-HH No-Sync Beeps'...
    Processing 'RF-7800V-HH Power Management'...
    Processing 'RF-7800V-HH Retransmit'...
    Processing 'RF-7800V-HH USB Mode'...
    Processing 'RF-7800V-HH Broadcast Gateway'...
    Processing 'RF-7800V-HH IP Routing'...
    Processing 'RF-7800V-HH Voice Settings'...
    Processing 'RF-7800V-HH Time and Date Settings'...
    Processing 'RF-7800V-HH Position Reporting'...
    Processing 'RF-7800V-HH User Interfaces'...
    Processing 'RF-7800V-HH Net Switches'...
    Processing 'RF-7800V-HH Ethernet Interface'...
    Building 'RF-7800V-HH Global Settings'...
    Processing 'RF-7800V-HH Global Settings'...
    Processing 'RF-7800V-HH Radio Passwords'...
    Processing 'RF-7800V-HH GPS'...
    Processing 'RF-7800V-HH Locksets'...
    Building 'RF-7800V-HH Network Types'...
    Processing 'RF-7800V-HH Network Types'...
    Building 'RF-7800V-HH Fixed Frequency LOS'...
    Processing 'General Information - Fixed Frequency LOS'...
    Processing 'RF-7800V-HH FF Network Information'...
    Processing 'RF-7800V-HH FF Preset'...
    Processing 'RF-7800V-HH FF General'...
    Processing 'RF-7800V-HH FF Comsec'...
    Processing 'RF-7800V-HH FF Data-Voice'...
    Processing 'RF-7800V-HH FF Squelch'...
    Processing 'RF-7800V-HH FF Advanced'...
    Warning: style (p.Heading7) is not defined and will be mapped to 'Normal'.
    Building 'RF-7800V-HH Quicklook'...
    Processing 'General Information - Quicklook'...
    Processing 'Hopset Creation - Quicklook'...
    Processing 'RF-7800V-HH QL Network Information'...
    Processing 'RF-7800V-HH QL Preset'...
    Processing 'RF-7800V-HH QL General'...
    Processing 'RF-7800V-HH QL Comsec'...
    Processing 'RF-7800V-HH QL Data-Voice'...
    Processing 'RF-7800V-HH QL Advanced'...
    Building 'RF-7800V-HH Sample Plans'...
    Processing 'General Information - Sample Plans'...
    Processing 'Simple Fixed and Quicklook Nets'...
    Processing 'Single Fixed and Quicklook Nets'...
    Processing 'RF-7800V-HH Manage Keys'...
    Processing 'RF-7800V-HH Program Radio'...
    Building 'RF-7800V-HH Tech Support'...
    Processing 'RF-7800V-HH Technical Support'...
    Processing 'RF-7800V-HH Radio Firmware Compatibility'...
    Building 'FAQs'...
    Processing 'RF-7800V-HH FAQ Index'...
    Processing 'FAQ 01'...
    Warning: style (span.strong) is not defined and will be removed.
    Warning: style (p.para) is not defined and will be mapped to 'Normal'.
    Processing 'FAQ 02'...
    Processing 'FAQ 03'...
    Processing 'FAQ 04'...
    Processing 'FAQ 05'...
    Processing 'RF-7800V-HH Glossary'...
    Warning: style (p.FM_CellRowHead) is not defined and will be mapped to 'Normal'.
    Warning: style (span.Glossary) is not defined and will be removed.
    Warning: style (p.FM_CellBodyLeft) is not defined and will be mapped to 'Normal'.
    Warning: style (p.FM_GLOSSARY) is not defined and will be mapped to 'Normal'.
    Warning: style (p.FM_Para) is not defined and will be mapped to 'Normal'.
    Completed building chapters...
    Building 'Index'...
    Updating list paragraphs...
    Updating images...
    Updating page numbers...
    Updating page headers...
    Updating Table of Contents...
    Updating Index...
    Saving 'Printed_Documentation.doc'...
    Generating 'Printed_Documentation.pdf'...
    Failed the generate PDF file 'C:\Documents and Settings\tcleary\My Documents\My RoboHelp Projects\Adobe RoboHelp 8\10515-0366-5004_7800v-hh rsp\!SSL!\Printed_Documentation.pdf'...
    Failed to save 'Printed_Documentation.doc'...
    Cleaning up temporary files...
    I am pretty sure nobody will have any fix suggestions that work to solve this problem, but I am making this entry for historical purposes. I will add an entry stating whether the Suite reload resolves this issue.
    Thanks,
    Tim C @ Harris

    If I select ONLY the Word DOC Output format in the Printed Documentation
    setup, the output is created without an error (output text below).  Links do work within
    this Word document (a symptom change since installing patch 8.0.2).
    When I use this Word document to create a PDF (using the Adobe PDF
    printer driver) a PDF is successfully created, however no bookmarks are
    created in the bookmarks panel and none of the links in this PDF work
    (although they are created looking like they will work, i.e., blue
    underlined text).
    Regards,
    Tim
    ------------- Output Text --------------------------
    Starting to build Printed Documentation...
    Printed Documentation processor 8.0.1.204
    Building C:\Documents and Settings\tcleary\My Documents\My RoboHelp Projects\Adobe RoboHelp 8\10515-0366-5004_7800v-hh rsp\!SSL!\Printed_Documentation.doc ...
    Preparing to create Printed Documentation...
    Clearing output folder...
    Preparing files for Print Document...
    Copying files...
    Updating files...
    Finished preparing in 3 seconds.
    Preparing environment...
    Printed Document Generator Environment: Word 11.0.8313,  OS 5.1.2600, RAM 2048 M Bytes
    Building Printed Documentation 'Printed Documentation'...
    Building Single Document 'Printed_Documentation.doc'...
    Building 'RF-7800V-HH About this Help'...
    Building 'Table of Contents'...
    Preparing to build chapters...
    Building 'RF-7800V-HH Help and Support'...
    Processing 'RF-7800V-HH Welcome'...
    Building 'RF-7800V-HH RSP Help'...
    Processing 'RF-7800V-HH Station Information'...
    Building 'RF-7800V-HH Features'...
    Processing 'RF-7800V-HH Features'...
    Processing 'RF-7800V-HH Anc. Connector Mode'...
    Processing 'RF-7800V-HH No-Sync Beeps'...
    Processing 'RF-7800V-HH Power Management'...
    Processing 'RF-7800V-HH Retransmit'...
    Processing 'RF-7800V-HH USB Mode'...
    Processing 'RF-7800V-HH Broadcast Gateway'...
    Processing 'RF-7800V-HH IP Routing'...
    Processing 'RF-7800V-HH Voice Settings'...
    Processing 'RF-7800V-HH Time and Date Settings'...
    Processing 'RF-7800V-HH Position Reporting'...
    Processing 'RF-7800V-HH User Interfaces'...
    Processing 'RF-7800V-HH Net Switches'...
    Processing 'RF-7800V-HH Ethernet Interface'...
    Building 'RF-7800V-HH Global Settings'...
    Processing 'RF-7800V-HH Global Settings'...
    Processing 'RF-7800V-HH Radio Passwords'...
    Processing 'RF-7800V-HH GPS'...
    Processing 'RF-7800V-HH Locksets'...
    Building 'RF-7800V-HH Network Types'...
    Processing 'RF-7800V-HH Network Types'...
    Building 'RF-7800V-HH Fixed Frequency LOS'...
    Processing 'General Information - Fixed Frequency LOS'...
    Processing 'RF-7800V-HH FF Network Information'...
    Processing 'RF-7800V-HH FF Preset'...
    Processing 'RF-7800V-HH FF General'...
    Processing 'RF-7800V-HH FF Comsec'...
    Processing 'RF-7800V-HH FF Data-Voice'...
    Processing 'RF-7800V-HH FF Squelch'...
    Processing 'RF-7800V-HH FF Advanced'...
    Warning: style (p.Heading7) is not defined and will be mapped to 'Normal'.
    Building 'RF-7800V-HH Quicklook'...
    Processing 'General Information - Quicklook'...
    Processing 'Hopset Creation - Quicklook'...
    Processing 'RF-7800V-HH QL Network Information'...
    Processing 'RF-7800V-HH QL Preset'...
    Processing 'RF-7800V-HH QL General'...
    Processing 'RF-7800V-HH QL Comsec'...
    Processing 'RF-7800V-HH QL Data-Voice'...
    Processing 'RF-7800V-HH QL Advanced'...
    Building 'RF-7800V-HH Sample Plans'...
    Processing 'General Information - Sample Plans'...
    Processing 'Simple Fixed and Quicklook Nets'...
    Processing 'Single Fixed and Quicklook Nets'...
    Processing 'RF-7800V-HH Manage Keys'...
    Processing 'RF-7800V-HH Program Radio'...
    Building 'RF-7800V-HH Tech Support'...
    Processing 'RF-7800V-HH Technical Support'...
    Processing 'RF-7800V-HH Radio Firmware Compatibility'...
    Building 'FAQs'...
    Processing 'RF-7800V-HH FAQ Index'...
    Processing 'FAQ 01'...
    Warning: style (span.strong) is not defined and will be removed.
    Warning: style (p.para) is not defined and will be mapped to 'Normal'.
    Processing 'FAQ 02'...
    Processing 'FAQ 03'...
    Processing 'FAQ 04'...
    Processing 'FAQ 05'...
    Building 'RF-7800V-HH Glossary'...
    Warning: style (p.FM_CellRowHead) is not defined and will be mapped to 'Normal'.
    Warning: style (span.Glossary) is not defined and will be removed.
    Warning: style (p.FM_CellBodyLeft) is not defined and will be mapped to 'Normal'.
    Warning: style (p.FM_GLOSSARY) is not defined and will be mapped to 'Normal'.
    Warning: style (p.FM_Para) is not defined and will be mapped to 'Normal'.
    Completed building chapters...
    Building 'Index'...
    Updating list paragraphs...
    Updating images...
    Updating page numbers...
    Updating page headers...
    Updating Table of Contents...
    Updating Index...
    Saving 'Printed_Documentation.doc'...
    Completed building Printed Documentation...
    Preparing output directory...
    Cleaning up temporary files...
    Finished Printed Documentation generation in 5 minutes 36 seconds.
    Building Printed Documentation complete.

  • To send output as email in PDF format

    I am using Function module <b>so_new_document_att_send_api1</b> to send my report output as Email.
    Please tell me how to send it in PDF format.

    1) FIRST GENERATE SPOOL REQUEST  for ur output THEN DOWNLOAD this spool request to a PDF file via REPORT PROGRAM  - RSTXPDFT4 .
    2) then use this program to send this PDf via mail (also see ur SCOT setttings) -
    *& Report  ZGILL_SENDMAIL_PDF                                          *
    REPORT  ZGILL_SENDMAIL_PDF                      .
    INCLUDE ZGILL_INCMAIL.  "SEE BELOW FOR INCLUDE PROGRAM CODE.
    DATA
    DATA : itab LIKE tline OCCURS 0 WITH HEADER LINE.
    DATA : file_name TYPE string.
    data : path like PCFILE-PATH.
    data : extension(5) type c.
    data : name(100) type c.
    SELECTION SCREEN
    PARAMETERS : receiver TYPE somlreci1-receiver lower case DEFAULT '[email protected]'.
    PARAMETERS : p_file LIKE rlgrap-filename
    OBLIGATORY DEFAULT 'C:\TEMP\SALARY_SLIP1.PDF'.
    AT SELECTION SCREEN
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
    CLEAR p_file.
    CALL FUNCTION 'F4_FILENAME'
    IMPORTING
    file_name = p_file.
    START-OF-SELECTION
    START-OF-SELECTION.
    PERFORM ml_customize USING 'Tst' 'Testing'.
    PERFORM ml_addrecp USING receiver 'U'.
    PERFORM upl.
    PERFORM doconv TABLES itab objbin.
    PERFORM ml_prepare USING 'X' extension name.
    PERFORM ml_dosend.
    SUBMIT rsconn01
    WITH mode EQ 'INT'
    AND RETURN.
    FORM
    FORM upl.
    file_name = p_file.
    CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
    filename = file_name
    filetype = 'BIN'
    TABLES
    data_tab = itab
    EXCEPTIONS
    file_open_error = 1
    file_read_error = 2
    no_batch = 3
    gui_refuse_filetransfer = 4
    invalid_type = 5
    no_authority = 6
    unknown_error = 7
    bad_data_format = 8
    header_not_allowed = 9
    separator_not_allowed = 10
    header_too_long = 11
    unknown_dp_error = 12
    access_denied = 13
    dp_out_of_memory = 14
    disk_full = 15
    dp_timeout = 16
    OTHERS = 17.
    path = file_name.
    CALL FUNCTION 'PC_SPLIT_COMPLETE_FILENAME'
    EXPORTING
    complete_filename = path
    CHECK_DOS_FORMAT =
    IMPORTING
    DRIVE =
    EXTENSION = extension
    NAME = name
    NAME_WITH_EXT =
    PATH =
    EXCEPTIONS
    INVALID_DRIVE = 1
    INVALID_EXTENSION = 2
    INVALID_NAME = 3
    INVALID_PATH = 4
    OTHERS = 5
    ENDFORM. "upl
    *********************iNCLUDE pROGRAM********************************************
    *&  Include           ZGILL_INCMAIL                                    *
    Data
    DATA: docdata LIKE sodocchgi1,
    objpack LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
    objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
    objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
    objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
    objhex LIKE solix OCCURS 10 WITH HEADER LINE,
    reclist LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
    DATA: tab_lines TYPE i,
    doc_size TYPE i,
    att_type LIKE soodk-objtp.
    DATA: listobject LIKE abaplist OCCURS 1 WITH HEADER LINE.
    FORM
    FORM ml_customize USING objname objdesc.
    Clear Variables
    CLEAR docdata.
    REFRESH objpack.
    CLEAR objpack.
    REFRESH objhead.
    REFRESH objtxt.
    CLEAR objtxt.
    REFRESH objbin.
    CLEAR objbin.
    REFRESH objhex.
    CLEAR objhex.
    REFRESH reclist.
    CLEAR reclist.
    REFRESH listobject.
    CLEAR listobject.
    CLEAR tab_lines.
    CLEAR doc_size.
    CLEAR att_type.
    Set Variables
    docdata-obj_name = objname.
    docdata-obj_descr = objdesc.
    ENDFORM. "ml_customize
    FORM
    FORM ml_addrecp USING preceiver prec_type.
    CLEAR reclist.
    reclist-receiver = preceiver.
    reclist-rec_type = prec_type.
    APPEND reclist.
    ENDFORM. "ml_customize
    FORM
    FORM ml_addtxt USING ptxt.
    CLEAR objtxt.
    objtxt = ptxt.
    APPEND objtxt.
    ENDFORM. "ml_customize
    FORM
    FORM ml_prepare USING bypassmemory whatatt_type whatname.
    IF bypassmemory = ''.
    Fetch List From Memory
    CALL FUNCTION 'LIST_FROM_MEMORY'
    TABLES
    listobject = listobject
    EXCEPTIONS
    OTHERS = 1.
    IF sy-subrc <> 0.
    MESSAGE ID '61' TYPE 'E' NUMBER '731'
    WITH 'LIST_FROM_MEMORY'.
    ENDIF.
    CALL FUNCTION 'TABLE_COMPRESS'
    IMPORTING
    COMPRESSED_SIZE =
    TABLES
    in = listobject
    out = objbin
    EXCEPTIONS
    OTHERS = 1
    IF sy-subrc <> 0.
    MESSAGE ID '61' TYPE 'E' NUMBER '731'
    WITH 'TABLE_COMPRESS'.
    ENDIF.
    ENDIF.
    Header Data
    Already Done Thru FM
    Main Text
    Already Done Thru FM
    Packing Info For Text Data
    DESCRIBE TABLE objtxt LINES tab_lines.
    READ TABLE objtxt INDEX tab_lines.
    docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
    CLEAR objpack-transf_bin.
    objpack-head_start = 1.
    objpack-head_num = 0.
    objpack-body_start = 1.
    objpack-body_num = tab_lines.
    objpack-doc_type = 'TXT'.
    APPEND objpack.
    Packing Info Attachment
    att_type = whatatt_type..
    DESCRIBE TABLE objbin LINES tab_lines.
    READ TABLE objbin INDEX tab_lines.
    objpack-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objbin ).
    objpack-transf_bin = 'X'.
    objpack-head_start = 1.
    objpack-head_num = 0.
    objpack-body_start = 1.
    objpack-body_num = tab_lines.
    objpack-doc_type = att_type.
    objpack-obj_name = 'ATTACHMENT'.
    objpack-obj_descr = whatname.
    APPEND objpack.
    Receiver List
    Already done thru fm
    ENDFORM. "ml_prepare
    FORM
    FORM ml_dosend.
    CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
    document_data = docdata
    put_in_outbox = 'X'
    commit_work = 'X' "used from rel. 6.10
    IMPORTING
    SENT_TO_ALL =
    NEW_OBJECT_ID =
    TABLES
    packing_list = objpack
    object_header = objhead
    contents_bin = objbin
    contents_txt = objtxt
    CONTENTS_HEX = objhex
    OBJECT_PARA =
    object_parb =
    receivers = reclist
    EXCEPTIONS
    too_many_receivers = 1
    document_not_sent = 2
    document_type_not_exist = 3
    operation_no_authorization = 4
    parameter_error = 5
    x_error = 6
    enqueue_error = 7
    OTHERS = 8
    IF sy-subrc <> 0.
    MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
    WITH docdata-obj_name.
    ENDIF.
    ENDFORM. "ml_customize
    FORM
    FORM ml_spooltopdf USING whatspoolid.
    DATA : pdf LIKE tline OCCURS 0 WITH HEADER LINE.
    Call Function
    CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
    EXPORTING
    src_spoolid = whatspoolid
    TABLES
    pdf = pdf
    EXCEPTIONS
    err_no_otf_spooljob = 1
    OTHERS = 12.
    Convert
    PERFORM doconv TABLES pdf objbin.
    ENDFORM. "ml_spooltopdf
    FORM
    FORM doconv TABLES
    mypdf STRUCTURE tline
    outbin STRUCTURE solisti1.
    Data
    DATA : pos TYPE i.
    DATA : len TYPE i.
    Loop And Put Data
    LOOP AT mypdf.
    pos = 255 - len.
    IF pos > 134. "length of pdf_table
    pos = 134.
    ENDIF.
    outbin+len = mypdf(pos).
    len = len + pos.
    IF len = 255. "length of out (contents_bin)
    APPEND outbin.
    CLEAR: outbin, len.
    IF pos < 134.
    outbin = mypdf+pos.
    len = 134 - pos.
    ENDIF.
    ENDIF.
    ENDLOOP.
    IF len > 0.
    APPEND outbin.
    ENDIF.
    ENDFORM. "doconv
    **********************INCLUDE END********************************

  • MII 12.1 Support for plain text (text/plain) output

    I'm hoping someone can guide me on how to output plain text from an MII 12.1 transaction
    I have three MII systems to test against: MII 11.5.6 b73, MII 12.0.6 build 15, and MII 12.1.5 build 85
    Here's the test files I used on all three systems...
    1) Create a new MII transaction
    2) Create a new Transaction parameter called "Output" of type string and set the value to "Hello World"
    3) Save the transaction anywhere as "HelloWorld"
    4) Create a new Xacute Query and point it to the "HellowWorld" transaction
    5) Map the output parameter to "Output"
    6) Save the Xacute Query as "HelloWorldQuery"
    Scenario - Execute an MII Transaction via URL
    1)Open a new browser window
    2) Type in the following URL (replacing the bracketed params):
    http://[[SERVER]]:[[PORT]]/XMII/Runner?Transaction=[[PATH_TO_HELLOWORLD]]&OutputParameter=Output&Content-Type=text/plain (12.x,12.1)
    or
    http://[[SERVER]]/Lighthammer/Runner.jsp?Transaction=[[PATH_TO_HELLOWORLD]]&OutputParameter=Output&Content-Type=text/plain (11.5)
    3) Both MII 11.5 and MII 12.0 will output the "Hello World" string (no XML). MII 12.1 will return the Output in XML format (text/xml).
    Thanks in advance!

    Create transaction with a SAP MII Document output, where you have inserted the text as a SAP MII message. The output will be in the form:
    <Rowsets><Messages><message>text to output</message></Messages></Rowsets>
    Insert the transaction into a XAcuteQuery
    Create a stylesheet which only output is the message node in the output from the transaction
    <xsl:output method="text" encoding="UTF-8" />
    <xsl:template match="/Rowsets/Messages/Message">
    <xsl:value-of select="." />
    </xsl:template>
    Run the query from the url:
    "http://SERVER:PORT/XMII/Illuminator?QueryTemplate=QUERYTEMPLATE&Stylesheet=STYLESHEET"

  • How to find Oracle documentation in PDF format

    In the last month, i downloaded two oracle guide in PDF format from OTN site: "Oracle Spatial Topology and Network Data Models" and "Workspace Manager". But now I forgot the link where i founded a complete list of document prompted to download (over 40-50 e-books).
    Thank you in advance.

    Both books are avaialble on the 10g Documentation Library page: http://www.oracle.com/pls/db102/portal.portal_db?selected=3
    in both HTML and PDF formats.

  • Output of Report in PDF Format on the Web

    I am running my application developed in developer 6i on the web. When is take the output of the reports in HTML format the output comes fine.
    But when I set the report output format to PDF from registry the browser does not open the file & gives the message error opeing file. But the file is accurately created in server's temporary directory which can be opened separately without reports server.
    I am using IE 5 & also tried 6.
    I have installed Forms & reports server from developer 6i CD without 9iAS.
    Somebody gave me the answer that there is some bug in reports server. Is it really a bug ??? Another thing is if it is a bug, it also exists in 9iAS.
    Please help me out
    Thanks
    Zulqarnain

    PrintOutputController.export, get the byte stream, save on server.
    Sincerely,
    Ted Ueda

Maybe you are looking for