Type and Group color doesn't change.

I'm having a problem with Adobe Illustrator CC 17.1.0 with colors, types and groups.
If I select a text or a group and try to change its color, the Fill color stays correct a the panel, but the text or the group maintains the old color, like the screenshot below.
The only way to change color its is selecting all text characters or all group's elements.

Here they are.
Thanks for trying to help!

Similar Messages

Changing resolution and image size doesn't change result on screen?

I'm using Photoshop CS3. I am trying to change the resolution of several images that will be printed in a newspaper. So the current images are 72 ppi and really huge -- for example 36 x 27 inches (document size), and when I change them to 300 ppi, the image sizes shrink to about 8 x 6 inches, as I expect. But the image I see on the screen doesn't change. So, for example, when I open up the image originally, it's at 33% and the entire image is visible. After I change the resolution, and the image size has changed accordingly, the image still appears the same and it remains at 33%. Shouldn't the image shrink on the screen since its size has shrunk? Or if it remains the same on the screen, shouldn't the percentage shift? I mean if the document size is now 8 x 6, it should be able to be displayed at 100% and not fill my whole screen... I'm so confused. Thanks...

gradded,
The "Document Size" area of the Image Size dialog is just to indicate the size (in inches) that your document will be printed. The ppi adjustment has nothing to do with what is displayed on your monitor. Your monitor doesn't care anything about ppi. The monitor contains a certain number of pixels and after you change that ppi setting, the monitor will still have that same number of pixels.
As long as you leave the "Resample Image" box unchecked, your image size (Pixel Dimensions) will not change. You will see no change on your monitor. If you check the "Resample Image" box, then your image size (in pixels) will change.
Hope this helps.

Hyperlink color doesn't change when hovering over link

I create hyperlink, color I select for hovering over link works fine. But sometimes when I publish to my website the link color does not change, but the link works ok. I go back to my mac and check, sure enough the color changes just fine. I wipe out the link and reinsert new one. Works fine on the mac, but when I publish, color does not change when hovering. Help.

Welcome to the discussions. This is a long shot, but try clearing your browser's cache and reloading the page — then see if the color changes when hovering. ( In Safari, click on the Safari menu and choose +Empty Cache...+ )

Wage type and group

hi all,
i have created a labour activities. after production order conf or delivery i want cost of labour to flow to HR.
i know in work center we can create wage type and pls let me know what are the steps in achieving this
thank you
sanjeev

Dear llija,
These were the most predominant factor for Payroll. Though there are lots to explain on these factors, I had just highlighted on important aspect, by which you can have an idea on what is it all about in creating a wage type.
Wage Type Group(T-code:PU96) : Combination of all the Wage types which are to be populated in the particular infotype. Say for instance: 0008 Basic Pay Infotype has a group of Wage types clubbed together which helps to get populated during the creation of Basic Pay 0008 infotype. Which means, only these particular wage types will appear in 0008.
Wage Type Catalog(OH11) : Here, we copy the Primary Wage type and name it according to the customer specific requirements. All the custom wage type should be copied from the standard model wage type.
Wage Type Model (Table : V_T539A): This Wage type model is created in order to make the wage types get defaulted in 0008 Basic Pay infotype using the LGMST Feature. Where, LGMST feature ends with the return value as No:of Enterable Wage types / Wage Type Model.
Hope this brief information gives you a clear understanding on Wage Type concept.
Regards
Veena

Font and font color are getting changed for SAP R/3 report in portal

Hai,
We are using ITS 6.2 patch 26 and EP 6.0.
When i run a SAP R/3 4.6C report in ITS 6.2, the report content are shown in Courier New font with blue color.
When i run the same report from portal, the report content are shown in Arial font with blackish blue color.
Can anyone tell why in portal the font attributes are getting changed and how to have the same font attributes in portal also.
Regards,
H.K.Hayath Basha.

Hi
Please go to System Administration -> Portal Display -> Themes.
You can change the font type , color and size from here and have to properly assign it to the Desktop for the users for which these font should be displayed .
Please check the following links :
http://help.sap.com/saphelp_nw04/helpdata/en/26/3df46c0584cd4eb31e91aa7bcf1893/frameset.htm
Edited by: purav mehta on Dec 16, 2007 6:01 PM

Transition types and Group

Hi,
I am working in SAP CRM IC Web client.
My problem is "How to assign transition types to a group. Like Credit Control group gets only Accounts related Interaction record assigned to there group in there inbox... "
What is the setting ?
Thanks and regards,
Biplab Mandal

Hi,
Can you provide more details of the issue?

Color doesn't change printing online.

Have a HP C4180 Printer. When printing online and assign the color kind to black and white, it still prints in color. Anyone have answers? Thanks.
iMac G5 Mac OS X (10.4.8)

do I need to insert something before the line ?
g.setColor(Color.blue);

Frequent rebooting and Battery percentage doesn't change

Hi ,
I had recently changed my iphone 5 back housing (rear panel ) , since then my mobile keeps rebooting for 6-7 times and then works fine , also the battery percentage doesnt change at all ..similar problem is faced by most people who changes the back housing .. anyone got a fix on this issue ?? please help

The OP is likely referring to the battery in their keyboard or mouse, in that case the OP needs to look in the System Preference for each device to see the status of the battery.

Viewer and browser color doesn't match on screen

curious about what is going on.
Attached is a link to a screen grab.
The left side is the viewer in apple. The center is the browser in apple. The far right is the same image uploaded into the zenfolio website.
What am I doing wrong?
<a href="http://s1270.photobucket.com/albums/jj603/np_kitchen/test%20images/?action=view& current=Screenshot2012-09-11at55852PM.png" target="_blank"><img src="http://i1270.photobucket.com/albums/jj603/np_kitchen/test%20images/Screenshot201 2-09-11at55852PM.png" border="0" alt="Photobucket"></a>

I don't know the exact answer, but when people have asked about problems like these on Adobe's own Photoshop forums, it is often related to the graphics card driver. You can try experimenting to see if it changes if you turn off OpenGL in the Photoshop preferences. If it does behave differently then, it could be a graphics driver issue. That's all I know...for more, you might ask on Adobe's forum.

Microphone doesn't work and screen resolution doesn't change to full screen

my laptop is Toshiba Satellite M300, i dont know the series, this is information from bottom label
TOSHIBA M300
T660 2048 320 14WC DMD agnBT 6C VBX 1Y
PSMDCL-08T010
69080277W
after i install windows 7,
1.why the microphone doesnt work???
2. why the sreen resolution not full screen when i play games??(in vista no proplem about the screen resolution)
thank you..

How did you upgrade? Clean?
Did you get your drivers here?
-Jerry

How to change group colors

How to change group color in ical

To change group colors:
highlight 'desired' group,
under <Edit>, choose <Get Info>,
this should give you a smaller window:
          'desired' Info
          Name: desired                    Box with color choices
                                                   (dropdown colors; 'other' accesses other color palettes)
          Description: (can be added)
          Box ' Ignore alarms'
          'Publish...'                    'Cancel'                    'OK'
   4. make color choice,
   5. choose <OK> to complete color change, or <Cancel> original color remains.
I do hope I've gotten this correct.

Add, delete and group fields in Application Area of transaction CIC0

Hi,
In the transaction of CIC0, I have the requirements of:
- Delete the field "Function" corresponding to the Business Partner 1, all the fields corresponding to Business Partner 2, all the fields corresp. to IBase, and the fields: "Address type" and "Fax" for Address.
- Change the title of "Business Partner 1" to "Third-Party".
- Add fields of: ZIP Code, Mobile Phone in the Adress.
- Group the fields of ***: Masculin, Femenin or Unknown, now in 3 different fields, in a combo.
So, I searched info in this forum, and it said to go to the trans. SMW0, copy the Object Web "CRM_CIC_SEARCH_DISPLAY", to a Z. So I copied it to: "Z_CRM_CIC_SEARCH_DISPLAY".
I downloaded the .htm from Z_CRM_CIC_SEARCH_DISPLAY from this transaction, and I edited it to delete the fields not required.
So I opened the .htm in IE and Mozilla, and it showed good.
But, now it's the problem. I've read that in trans. CRM_CIC_SEARCH_RULE (or going from SPRO to this trans.), it should be linked the BPSEARCH Attributes, when appears "CRM_CIC_SEARCH_DISPLAY", put "Z_CRM_SEARCH_DISPLAY" (my Z).
BUT IT DOESN'T WORK.
So how should it be done?.
(I found this info here: CRM IC Winclient - How to add new fields in the BP Search of TRX CIC0 ):
And for adding fields, should I editing the HTML, or should I add fields in these structures: CCMBP1FIELDS, CCMBP2FIELDS, and then editing the HTML and adding these Z fields, then editing the function module used for searching (it's found in SPRO, in Search Strategies)
To change the title of "Business Partner 1" to "Third-Party", I think it should be done in the HTML too, right?.
To group the *** in a combo, how should it be done?.
Thanks.

Hi,
I also need to add custom fields to Basic data view. After copying & changing the screen sequence in Config, I could able to see the custom fields in Basic Data view.
I have appended structure with custom fields to MARA table.
But the values I enter in the screen is not getting updated to the table MARA.
Can you please let me know the code, I should have have in PAI (Process After Input) module in the Sub Screen to update the values?
Thanks,
Dasa

Type Doesn''t Change Color

Hi, I select my black type and then from the "Color" I use the sliders to choose a color but the type remains black. Why doesn't the type change to the color I select.
It's probably something simple I am overlooking.
Thanks

Scott, No I can see the stroke color is empty. I am selecting the fill color.
I select the box I want changed (using the "Direct Selection Tool") and then I click on color and use the sliders to change the color. But it doesn't change the color unless I change from RGB to CMYK or RGB to CMYK then the color wil change.
Is there a default color setting somewhere? I find I like to design using Web colors and then I will convert to CMYK for printing.
Any ideas what I am doing wrong.

My typewriter toolbar is graying out the ability to change font size, type, and color.

My typewriter toolbar is graying out the ability to change font size, type, and color.

Here's what I have done in the past. Maybe not elegant, but
it works. (I
use PHP, but I'm sure you can modify for ASP.)
In the HEAD of each web page, include regular old embedded
STYLE tags,
but INCLUDE an external PHP file:
<head>
<style type="text/css">
<?php include('styles/testcss.php'); ?>
</style>
</head>
Now in that included PHP file, just have CSS code which pulls
in your
dynamic data. Here's an example snippet:
body {
color: #600;
background-color: <?php echo
$row_recordset['bgcolor'];?>
Of course, you'll need the code for the recordset somewhere
too.
Alec
Adobe Community Expert

ISU Change Register Group and Rate type and Rate fact Group using BAPIs

Hi,
Can anyone please help me on how to use ISU_O_DEVICEMOD_OPEN and ISU_S_DEVICEMOD_CHANGE for changing the Register Group and Rate type and Rate fact Group.
Thanks,
John

Hello,
Can an expert please reply to this thread? I have the same issue.
Thanks,
Andre

Type and Group color doesn't change.

Similar Messages

Maybe you are looking for