Type conflict error when using TS_EngineGetSeqFile
I was trying to use function TS_EngineGetSeqFile to load a sequence file build in TestStand 4.0, and I got a OLE error showing me that I have a type conflict with "CommonResults". Does anyone know how to solve this problem??
Hi huizhong,
The type conflict dialog you are seeing is evidence that the copy of CommonResults (an NI-Installed type) in the sequence file has the same version but different settings than the currently loaded CommonResults type definition. CommonResults
is stored in almost all of the built in TestStand type palettes which
automatically get loaded when you open TestStand. Because of this, it
becomes a part of the global type usage list in the Engine. If you
didn't make any changes to CommonResults yourself, it is likely you have inherited a type virus from somewhere and I suggest you take measures to correct the problem.
A
type virus can spread when you tell TestStand to resolve a type
conflict by using the version from the file you are currently opening
(as opposed to the currently loaded type in the global type usage
list). Once the "new" type is copied over to the type palettes, it will
then get loaded every time TestStand runs. At this point, if you open
up more files that use this same type and choose to use the currently
loaded type when the type conflict dialog shows, TestStand will copy
the "new" version into the file - thus the spread or viral like
behavior.
In order to correct the problem, you can either:
Manually open each and every infected file and replace the invalid type with the valid type or...
Use the Type Differ tool that I wrote to inspect each file pair and merge the conflict automatically
I
realize that using the Type Differ at this point is still "manual" in
the sense that you must open each file pair and merge the conflict, but
hopefully in your case there aren't that many affected files. To that
end, I am working on a Batch version of the Type Differ that can diff
and merge entire directory structures automatically. Let me know if you
are interested in using such a tool and I will post a link when
development has reached a beta version.
Regards,
Similar Messages
-
Type Coercion error when using Chart change event
After upgrading to the Flex Builder 3 December build. I get a
type coercion error whenever I subscribe to a chart "change" event.
I get this error even with the "Selecting chart items" code sample
in the Flex Help. Is this a known issue?
TypeError: Error #1034: Type Coercion failed: cannot convert
mx.charts.events::ChartItemEvent@7107b81 to
mx.events.IndexChangedEvent.
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at
mx.core::UIComponent/dispatchEvent()[E:\dev\flex_3_beta3\sdk\frameworks\projects\framewor k\src\mx\core\UIComponent.as:9041]
at
mx.charts.chartClasses::ChartBase/regionChangeHandler()[C:\Work\flex\dmv_automation\proje cts\datavisualisation\src\mx\charts\chartClasses\ChartBase.as:4393]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at
mx.core::UIComponent/dispatchEvent()[E:\dev\flex_3_beta3\sdk\frameworks\projects\framewor k\src\mx\core\UIComponent.as:9041]
at
mx.charts.chartClasses::ChartBase/dispatchRegionChange()[C:\Work\flex\dmv_automation\proj ects\datavisualisation\src\mx\charts\chartClasses\ChartBase.as:4624]
at
mx.charts.chartClasses::ChartBase/endTracking()[C:\Work\flex\dmv_automation\projects\data visualisation\src\mx\charts\chartClasses\ChartBase.as:4636]swashbuck1r,
Thanks, it looks like somebody has moved the bug to the
charting components bug base and set the status to new, so it will
be investigated:
http://bugs.adobe.com/jira/browse/FLEXDMV-1648
Thanks again,
Peter -
Getting "invalid type: 169" errors when using POF with Push Replication
I'm trying to get Push Replication - latest version - running on Coherence 3.6.1. I can get it working fine if I don't use POF with my objects, but when trying to use POF format for my objects I get this:
2011-02-11 13:06:00.993/2.297 Oracle Coherence GE 3.6.1.1 <D5> (thread=Invocation:Management, member=1): Service Management joined the cluster with senior service member 1
2011-02-11 13:06:01.149/2.453 Oracle Coherence GE 3.6.1.1 <Info> (thread=DistributedCache:DistributedCacheForSequenceGenerators, member=1): Loaded POF configuration from "file:/C:/wsgpc/GlobalPositionsCache/resource/coherence/pof-config.xml"
2011-02-11 13:06:01.149/2.453 Oracle Coherence GE 3.6.1.1 <Info> (thread=DistributedCache:DistributedCacheForSequenceGenerators, member=1): Loaded included POF configuration from "jar:file:/C:/coherence3.6/coherence/lib/coherence.jar!/coherence-pof-config.xml"
2011-02-11 13:06:01.149/2.453 Oracle Coherence GE 3.6.1.1 <Info> (thread=DistributedCache:DistributedCacheForSequenceGenerators, member=1): Loaded included POF configuration from "jar:file:/C:/coherence3.6-pushreplication/coherence-3.6-common-1.7.3.20019.jar!/coherence-common-pof-config.xml"
2011-02-11 13:06:01.165/2.469 Oracle Coherence GE 3.6.1.1 <Info> (thread=DistributedCache:DistributedCacheForSequenceGenerators, member=1): Loaded included POF configuration from "jar:file:/C:/coherence3.6-pushreplication/coherence-3.6-messagingpattern-2.7.4.21016.jar!/coherence-messagingpattern-pof-config.xml"
2011-02-11 13:06:01.165/2.469 Oracle Coherence GE 3.6.1.1 <Info> (thread=DistributedCache:DistributedCacheForSequenceGenerators, member=1): Loaded included POF configuration from "jar:file:/C:/coherence3.6-pushreplication/coherence-3.6-pushreplicationpattern-3.0.3.20019.jar!/coherence-pushreplicationpattern-pof-config.xml"
2011-02-11 13:06:01.243/2.547 Oracle Coherence GE 3.6.1.1 <D5> (thread=DistributedCache:DistributedCacheForSequenceGenerators, member=1): Service DistributedCacheForSequenceGenerators joined the cluster with senior service member 1
2011-02-11 13:06:01.258/2.562 Oracle Coherence GE 3.6.1.1 <D5> (thread=DistributedCache:DistributedCacheForLiveObjects, member=1): Service DistributedCacheForLiveObjects joined the cluster with senior service member 1
2011-02-11 13:06:01.274/2.578 Oracle Coherence GE 3.6.1.1 <D5> (thread=DistributedCache:DistributedCacheForSubscriptions, member=1): Service DistributedCacheForSubscriptions joined the cluster with senior service member 1
2011-02-11 13:06:01.290/2.594 Oracle Coherence GE 3.6.1.1 <D5> (thread=DistributedCache:DistributedCacheForMessages, member=1): Service DistributedCacheForMessages joined the cluster with senior service member 1
2011-02-11 13:06:01.305/2.609 Oracle Coherence GE 3.6.1.1 <D5> (thread=DistributedCache:DistributedCacheForDestinations, member=1): Service DistributedCacheForDestinations joined the cluster with senior service member 1
2011-02-11 13:06:01.305/2.609 Oracle Coherence GE 3.6.1.1 <D5> (thread=DistributedCache:DistributedCacheWithPublishingCacheStore, member=1): Service DistributedCacheWithPublishingCacheStore joined the cluster with senior service member 1
2011-02-11 13:06:01.321/2.625 Oracle Coherence GE 3.6.1.1 <D5> (thread=DistributedCache, member=1): Service DistributedCache joined the cluster with senior service member 1
2011-02-11 13:06:01.461/2.765 Oracle Coherence GE 3.6.1.1 <Info> (thread=Proxy:ExtendTcpProxyService:TcpAcceptor, member=1): TcpAcceptor now listening for connections on 166.15.224.91:20002
2011-02-11 13:06:01.461/2.765 Oracle Coherence GE 3.6.1.1 <D5> (thread=Proxy:ExtendTcpProxyService:TcpAcceptor, member=1): Started: TcpAcceptor{Name=Proxy:ExtendTcpProxyService:TcpAcceptor, State=(SERVICE_STARTED), ThreadCount=0, Codec=Codec(Format=POF), Serializer=com.tangosol.io.DefaultSerializer, PingInterval=0, PingTimeout=0, RequestTimeout=0, SocketProvider=SystemSocketProvider, LocalAddress=[/166.15.224.91:20002], SocketOptions{LingerTimeout=0, KeepAliveEnabled=true, TcpDelayEnabled=false}, ListenBacklog=0, BufferPoolIn=BufferPool(BufferSize=2KB, BufferType=DIRECT, Capacity=Unlimited), BufferPoolOut=BufferPool(BufferSize=2KB, BufferType=DIRECT, Capacity=Unlimited)}
2011-02-11 13:06:01.461/2.765 Oracle Coherence GE 3.6.1.1 <D5> (thread=Proxy:ExtendTcpProxyService, member=1): Service ExtendTcpProxyService joined the cluster with senior service member 1
2011-02-11 13:06:01.461/2.765 Oracle Coherence GE 3.6.1.1 <Info> (thread=main, member=1):
Services
ClusterService{Name=Cluster, State=(SERVICE_STARTED, STATE_JOINED), Id=0, Version=3.6, OldestMemberId=1}
InvocationService{Name=Management, State=(SERVICE_STARTED), Id=1, Version=3.1, OldestMemberId=1}
PartitionedCache{Name=DistributedCacheForSequenceGenerators, State=(SERVICE_STARTED), LocalStorage=enabled, PartitionCount=257, BackupCount=1, AssignedPartitions=257, BackupPartitions=0}
PartitionedCache{Name=DistributedCacheForLiveObjects, State=(SERVICE_STARTED), LocalStorage=enabled, PartitionCount=257, BackupCount=1, AssignedPartitions=257, BackupPartitions=0}
PartitionedCache{Name=DistributedCacheForSubscriptions, State=(SERVICE_STARTED), LocalStorage=enabled, PartitionCount=257, BackupCount=1, AssignedPartitions=257, BackupPartitions=0}
PartitionedCache{Name=DistributedCacheForMessages, State=(SERVICE_STARTED), LocalStorage=enabled, PartitionCount=257, BackupCount=1, AssignedPartitions=257, BackupPartitions=0}
PartitionedCache{Name=DistributedCacheForDestinations, State=(SERVICE_STARTED), LocalStorage=enabled, PartitionCount=257, BackupCount=1, AssignedPartitions=257, BackupPartitions=0}
PartitionedCache{Name=DistributedCacheWithPublishingCacheStore, State=(SERVICE_STARTED), LocalStorage=enabled, PartitionCount=257, BackupCount=1, AssignedPartitions=257, BackupPartitions=0}
PartitionedCache{Name=DistributedCache, State=(SERVICE_STARTED), LocalStorage=enabled, PartitionCount=257, BackupCount=1, AssignedPartitions=257, BackupPartitions=0}
ProxyService{Name=ExtendTcpProxyService, State=(SERVICE_STARTED), Id=9, Version=3.2, OldestMemberId=1}
Started DefaultCacheServer...
2011-02-11 13:08:27.894/149.198 Oracle Coherence GE 3.6.1.1 <Error> (thread=Proxy:ExtendTcpProxyService:TcpAcceptor, member=1): Failed to publish EntryOperation{siteName=csfb.cs-group.com, clusterName=SPTestCluster, cacheName=source-cache, operation=Insert, publishableEntry=PublishableEntry{key=Binary(length=32, value=0x15A90F00004E07424F4F4B303038014E08494E535430393834024E0345535040), value=Binary(length=147, value=0x1281A30115AA0F0000A90F00004E07424F4F4B303038014E08494E535430393834024E03455350400248ADEEF99607060348858197BF22060448B4D8E9BE02060548A0D2CDC70E060648B0E9A2C4030607488DBCD6E50D060848B18FC1882006094E03303038402B155B014E0524737263244E1F637366622E63732D67726F75702E636F6D2D535054657374436C7573746572), originalValue=Binary(length=0, value=0x)}} to Cache passive-cache because of
(Wrapped) java.io.StreamCorruptedException: invalid type: 169 Class:com.oracle.coherence.patterns.pushreplication.publishers.cache.AbstractCachePublisher
2011-02-11 13:08:27.894/149.198 Oracle Coherence GE 3.6.1.1 <D5> (thread=Proxy:ExtendTcpProxyService:TcpAcceptor, member=1): An exception occurred while processing a InvocationRequest for Service=Proxy:ExtendTcpProxyService:TcpAcceptor: (Wrapped: Failed to publish a batch with the publisher [Active Publisher] on cache [source-cache]) java.lang.IllegalStateException: Attempted to publish to cache passive-cache
at com.tangosol.util.Base.ensureRuntimeException(Base.java:293)
at com.oracle.coherence.patterns.pushreplication.publishers.RemoteClusterPublisher$RemotePublishingAgent.run(RemoteClusterPublisher.java:348)
at com.tangosol.coherence.component.net.extend.proxy.serviceProxy.InvocationServiceProxy.query(InvocationServiceProxy.CDB:6)
at com.tangosol.coherence.component.net.extend.messageFactory.InvocationServiceFactory$InvocationRequest.onRun(InvocationServiceFactory.CDB:12)
at com.tangosol.coherence.component.net.extend.message.Request.run(Request.CDB:4)
at com.tangosol.coherence.component.net.extend.proxy.serviceProxy.InvocationServiceProxy.onMessage(InvocationServiceProxy.CDB:9)
at com.tangosol.coherence.component.net.extend.Channel.execute(Channel.CDB:39)
at com.tangosol.coherence.component.net.extend.Channel.receive(Channel.CDB:26)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Peer.onNotify(Peer.CDB:103)
at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
at java.lang.Thread.run(Thread.java:662)
Caused by: java.lang.IllegalStateException: Attempted to publish to cache passive-cache
at com.oracle.coherence.patterns.pushreplication.publishers.cache.AbstractCachePublisher.publishBatch(AbstractCachePublisher.java:163)
at com.oracle.coherence.patterns.pushreplication.publishers.RemoteClusterPublisher$RemotePublishingAgent.run(RemoteClusterPublisher.java:343)
... 9 more
Caused by: (Wrapped) java.io.StreamCorruptedException: invalid type: 169
at com.tangosol.util.ExternalizableHelper.fromBinary(ExternalizableHelper.java:265)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.PartitionedService$ConverterKeyToBinary.convert(PartitionedService.CDB:16)
at com.tangosol.util.ConverterCollections$ConverterInvocableMap.invoke(ConverterCollections.java:2156)
at com.tangosol.util.ConverterCollections$ConverterNamedCache.invoke(ConverterCollections.java:2622)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache$ViewMap.invoke(PartitionedCache.CDB:11)
at com.tangosol.coherence.component.util.SafeNamedCache.invoke(SafeNamedCache.CDB:1)
at com.oracle.coherence.patterns.pushreplication.publishers.cache.AbstractCachePublisher.publishBatch(AbstractCachePublisher.java:142)
... 10 more
Caused by: java.io.StreamCorruptedException: invalid type: 169
at com.tangosol.util.ExternalizableHelper.readObjectInternal(ExternalizableHelper.java:2265)
at com.tangosol.util.ExternalizableHelper.readObject(ExternalizableHelper.java:2253)
at com.tangosol.io.DefaultSerializer.deserialize(DefaultSerializer.java:74)
at com.tangosol.util.ExternalizableHelper.deserializeInternal(ExternalizableHelper.java:2703)
at com.tangosol.util.ExternalizableHelper.fromBinary(ExternalizableHelper.java:261)
... 16 more
2011-02-11 13:08:37.925/159.229 Oracle Coherence GE 3.6.1.1 <Error> (thread=Proxy:ExtendTcpProxyService:TcpAcceptor, member=1): Failed to publish EntryOperation{siteName=csfb.cs-group.com, clusterName=SPTestCluster, cacheName=source-cache, operation=Insert, publishableEntry=PublishableEntry{key=Binary(length=32, value=0x15A90F00004E07424F4F4B303038014E08494E535430393834024E0345535040), value=Binary(length=147, value=0x1281A30115AA0F0000A90F00004E07424F4F4B303038014E08494E535430393834024E03455350400248ADEEF99607060348858197BF22060448B4D8E9BE02060548A0D2CDC70E060648B0E9A2C4030607488DBCD6E50D060848B18FC1882006094E03303038402B155B014E0524737263244E1F637366622E63732D67726F75702E636F6D2D535054657374436C7573746572), originalValue=Binary(length=0, value=0x)}} to Cache passive-cache because of
(Wrapped) java.io.StreamCorruptedException: invalid type: 169 Class:com.oracle.coherence.patterns.pushreplication.publishers.cache.AbstractCachePublisher
2011-02-11 13:08:37.925/159.229 Oracle Coherence GE 3.6.1.1 <D5> (thread=Proxy:ExtendTcpProxyService:TcpAcceptor, member=1): An exception occurred while processing a InvocationRequest for Service=Proxy:ExtendTcpProxyService:TcpAcceptor: (Wrapped: Failed to publish a batch with the publisher [Active Publisher] on cache [source-cache]) java.lang.IllegalStateException: Attempted to publish to cache passive-cache
at com.tangosol.util.Base.ensureRuntimeException(Base.java:293)
at com.oracle.coherence.patterns.pushreplication.publishers.RemoteClusterPublisher$RemotePublishingAgent.run(RemoteClusterPublisher.java:348)
at com.tangosol.coherence.component.net.extend.proxy.serviceProxy.InvocationServiceProxy.query(InvocationServiceProxy.CDB:6)
at com.tangosol.coherence.component.net.extend.messageFactory.InvocationServiceFactory$InvocationRequest.onRun(InvocationServiceFactory.CDB:12)
at com.tangosol.coherence.component.net.extend.message.Request.run(Request.CDB:4)
at com.tangosol.coherence.component.net.extend.proxy.serviceProxy.InvocationServiceProxy.onMessage(InvocationServiceProxy.CDB:9)
at com.tangosol.coherence.component.net.extend.Channel.execute(Channel.CDB:39)
at com.tangosol.coherence.component.net.extend.Channel.receive(Channel.CDB:26)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Peer.onNotify(Peer.CDB:103)
at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
at java.lang.Thread.run(Thread.java:662)
Caused by: java.lang.IllegalStateException: Attempted to publish to cache passive-cache
at com.oracle.coherence.patterns.pushreplication.publishers.cache.AbstractCachePublisher.publishBatch(AbstractCachePublisher.java:163)
at com.oracle.coherence.patterns.pushreplication.publishers.RemoteClusterPublisher$RemotePublishingAgent.run(RemoteClusterPublisher.java:343)
... 9 more
Caused by: (Wrapped) java.io.StreamCorruptedException: invalid type: 169
at com.tangosol.util.ExternalizableHelper.fromBinary(ExternalizableHelper.java:265)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.PartitionedService$ConverterKeyToBinary.convert(PartitionedService.CDB:16)
at com.tangosol.util.ConverterCollections$ConverterInvocableMap.invoke(ConverterCollections.java:2156)
at com.tangosol.util.ConverterCollections$ConverterNamedCache.invoke(ConverterCollections.java:2622)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache$ViewMap.invoke(PartitionedCache.CDB:11)
at com.tangosol.coherence.component.util.SafeNamedCache.invoke(SafeNamedCache.CDB:1)
at com.oracle.coherence.patterns.pushreplication.publishers.cache.AbstractCachePublisher.publishBatch(AbstractCachePublisher.java:142)
... 10 more
Caused by: java.io.StreamCorruptedException: invalid type: 169
at com.tangosol.util.ExternalizableHelper.readObjectInternal(ExternalizableHelper.java:2265)
at com.tangosol.util.ExternalizableHelper.readObject(ExternalizableHelper.java:2253)
at com.tangosol.io.DefaultSerializer.deserialize(DefaultSerializer.java:74)
at com.tangosol.util.ExternalizableHelper.deserializeInternal(ExternalizableHelper.java:2703)
at com.tangosol.util.ExternalizableHelper.fromBinary(ExternalizableHelper.java:261)
... 16 more
2011-02-11 13:08:47.940/169.244 Oracle Coherence GE 3.6.1.1 <Error> (thread=Proxy:ExtendTcpProxyService:TcpAcceptor, member=1): Failed to publish EntryOperation{siteName=csfb.cs-group.com, clusterName=SPTestCluster, cacheName=source-cache, operation=Insert, publishableEntry=PublishableEntry{key=Binary(length=32, value=0x15A90F00004E07424F4F4B303038014E08494E535430393834024E0345535040), value=Binary(length=147, value=0x1281A30115AA0F0000A90F00004E07424F4F4B303038014E08494E535430393834024E03455350400248ADEEF99607060348858197BF22060448B4D8E9BE02060548A0D2CDC70E060648B0E9A2C4030607488DBCD6E50D060848B18FC1882006094E03303038402B155B014E0524737263244E1F637366622E63732D67726F75702E636F6D2D535054657374436C7573746572), originalValue=Binary(length=0, value=0x)}} to Cache passive-cache because of
(Wrapped) java.io.StreamCorruptedException: invalid type: 169 Class:com.oracle.coherence.patterns.pushreplication.publishers.cache.AbstractCachePublisher
2011-02-11 13:08:47.940/169.244 Oracle Coherence GE 3.6.1.1 <D5> (thread=Proxy:ExtendTcpProxyService:TcpAcceptor, member=1): An exception occurred while processing a InvocationRequest for Service=Proxy:ExtendTcpProxyService:TcpAcceptor: (Wrapped: Failed to publish a batch with the publisher [Active Publisher] on cache [source-cache]) java.lang.IllegalStateException: Attempted to publish to cache passive-cache
at com.tangosol.util.Base.ensureRuntimeException(Base.java:293)
at com.oracle.coherence.patterns.pushreplication.publishers.RemoteClusterPublisher$RemotePublishingAgent.run(RemoteClusterPublisher.java:348)
at com.tangosol.coherence.component.net.extend.proxy.serviceProxy.InvocationServiceProxy.query(InvocationServiceProxy.CDB:6)
at com.tangosol.coherence.component.net.extend.messageFactory.InvocationServiceFactory$InvocationRequest.onRun(InvocationServiceFactory.CDB:12)
at com.tangosol.coherence.component.net.extend.message.Request.run(Request.CDB:4)
at com.tangosol.coherence.component.net.extend.proxy.serviceProxy.InvocationServiceProxy.onMessage(InvocationServiceProxy.CDB:9)
at com.tangosol.coherence.component.net.extend.Channel.execute(Channel.CDB:39)
at com.tangosol.coherence.component.net.extend.Channel.receive(Channel.CDB:26)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Peer.onNotify(Peer.CDB:103)
at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
at java.lang.Thread.run(Thread.java:662)
Caused by: java.lang.IllegalStateException: Attempted to publish to cache passive-cache
at com.oracle.coherence.patterns.pushreplication.publishers.cache.AbstractCachePublisher.publishBatch(AbstractCachePublisher.java:163)
at com.oracle.coherence.patterns.pushreplication.publishers.RemoteClusterPublisher$RemotePublishingAgent.run(RemoteClusterPublisher.java:343)
... 9 more
Caused by: (Wrapped) java.io.StreamCorruptedException: invalid type: 169
at com.tangosol.util.ExternalizableHelper.fromBinary(ExternalizableHelper.java:265)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.PartitionedService$ConverterKeyToBinary.convert(PartitionedService.CDB:16)
at com.tangosol.util.ConverterCollections$ConverterInvocableMap.invoke(ConverterCollections.java:2156)
at com.tangosol.util.ConverterCollections$ConverterNamedCache.invoke(ConverterCollections.java:2622)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache$ViewMap.invoke(PartitionedCache.CDB:11)
at com.tangosol.coherence.component.util.SafeNamedCache.invoke(SafeNamedCache.CDB:1)
at com.oracle.coherence.patterns.pushreplication.publishers.cache.AbstractCachePublisher.publishBatch(AbstractCachePublisher.java:142)
... 10 more
Caused by: java.io.StreamCorruptedException: invalid type: 169
at com.tangosol.util.ExternalizableHelper.readObjectInternal(ExternalizableHelper.java:2265)
at com.tangosol.util.ExternalizableHelper.readObject(ExternalizableHelper.java:2253)
at com.tangosol.io.DefaultSerializer.deserialize(DefaultSerializer.java:74)
at com.tangosol.util.ExternalizableHelper.deserializeInternal(ExternalizableHelper.java:2703)
at com.tangosol.util.ExternalizableHelper.fromBinary(ExternalizableHelper.java:261)
... 16 more
It seems to be loading my POF configuration file - which also includes the standard Coherence ones as well as those required for PR - just fine, as you can see at the top of the trace.
Any ideas why POF format for my objects is giving this error (NB. I've tested the POF stuff outside of PR and it all works fine.)
EDIT: I've tried switching the "publisher" to the "file" publisher in PR. And that works fine. I see my POF format cached data extracted and published to the directory I specify. So the "publish" part seems to work when I use a file-publisher.
Cheers,
SteveHi Neville,
I don't pass any POF config parameters on the command-line. My POF file is called "pof-config.xml" so seems to be picked up by default. The trace I showed in my post shows the file being picked up.
My POF config file content is as follows:
<pof-config>
<user-type-list>
<!-- Standard Coherence POF types -->
<include>coherence-pof-config.xml</include>
<!-- Coherence Push Replication Required POF types -->
<include>coherence-common-pof-config.xml</include>
<include>coherence-messagingpattern-pof-config.xml</include>
<include>coherence-pushreplicationpattern-pof-config.xml</include>
<!-- User POF types (must be above 1000) -->
<user-type>
<type-id>1001</type-id>
<class-name>com.csg.gpc.domain.model.position.trading.TradingPositionKey</class-name>
<serializer>
<class-name>com.csg.gpc.coherence.pof.position.trading.TradingPositionKeySerializer</class-name>
</serializer>
</user-type>
<user-type>
<type-id>1002</type-id>
<class-name>com.csg.gpc.domain.model.position.trading.TradingPosition</class-name>
<serializer>
<class-name>com.csg.gpc.coherence.pof.position.trading.TradingPositionSerializer</class-name>
</serializer>
</user-type>
<user-type>
<type-id>1003</type-id>
<class-name>com.csg.gpc.domain.model.position.simple.SimplePosition</class-name>
<serializer>
<class-name>com.csg.gpc.coherence.pof.position.simple.SimplePositionSerializer</class-name>
</serializer>
</user-type>
<user-type>
<type-id>1004</type-id>
<class-name>com.csg.gpc.coherence.processor.TradingPositionUpdateProcessor</class-name>
</user-type>
</user-type-list>
</pof-config>
EDIT: I'm running both clusters here from within Eclipse. Here's the POF bits from the startup of the receiving cluster:
2011-02-11 15:05:22.607/2.328 Oracle Coherence GE 3.6.1.1 <D5> (thread=Invocation:Management, member=1): Service Management joined the cluster with senior service member 1
2011-02-11 15:05:22.779/2.500 Oracle Coherence GE 3.6.1.1 <Info> (thread=DistributedCache:DistributedCacheForSequenceGenerators, member=1): Loaded POF configuration from "file:/C:/wsgpc/GlobalPositionsCache/resource/coherence/pof-config.xml"
2011-02-11 15:05:22.779/2.500 Oracle Coherence GE 3.6.1.1 <Info> (thread=DistributedCache:DistributedCacheForSequenceGenerators, member=1): Loaded included POF configuration from "jar:file:/C:/coherence3.6/coherence/lib/coherence.jar!/coherence-pof-config.xml"
2011-02-11 15:05:22.779/2.500 Oracle Coherence GE 3.6.1.1 <Info> (thread=DistributedCache:DistributedCacheForSequenceGenerators, member=1): Loaded included POF configuration from "jar:file:/C:/coherence3.6-pushreplication/coherence-3.6-common-1.7.3.20019.jar!/coherence-common-pof-config.xml"
2011-02-11 15:05:22.779/2.500 Oracle Coherence GE 3.6.1.1 <Info> (thread=DistributedCache:DistributedCacheForSequenceGenerators, member=1): Loaded included POF configuration from "jar:file:/C:/coherence3.6-pushreplication/coherence-3.6-messagingpattern-2.7.4.21016.jar!/coherence-messagingpattern-pof-config.xml"
2011-02-11 15:05:22.779/2.500 Oracle Coherence GE 3.6.1.1 <Info> (thread=DistributedCache:DistributedCacheForSequenceGenerators, member=1): Loaded included POF configuration from "jar:file:/C:/coherence3.6-pushreplication/coherence-3.6-pushreplicationpattern-3.0.3.20019.jar!/coherence-pushreplicationpattern-pof-config.xml"
And here's the start-up POF bits from the sending cluster:
2011-02-11 15:07:09.744/2.343 Oracle Coherence GE 3.6.1.1 <D5> (thread=Invocation:Management, member=1): Service Management joined the cluster with senior service member 1
2011-02-11 15:07:09.916/2.515 Oracle Coherence GE 3.6.1.1 <Info> (thread=DistributedCache:DistributedCacheForSequenceGenerators, member=1): Loaded POF configuration from "file:/C:/wsgpc/GlobalPositionsCache/resource/coherence/pof-config.xml"
2011-02-11 15:07:09.916/2.515 Oracle Coherence GE 3.6.1.1 <Info> (thread=DistributedCache:DistributedCacheForSequenceGenerators, member=1): Loaded included POF configuration from "jar:file:/C:/coherence3.6/coherence/lib/coherence.jar!/coherence-pof-config.xml"
2011-02-11 15:07:09.916/2.515 Oracle Coherence GE 3.6.1.1 <Info> (thread=DistributedCache:DistributedCacheForSequenceGenerators, member=1): Loaded included POF configuration from "jar:file:/C:/coherence3.6-pushreplication/coherence-3.6-common-1.7.3.20019.jar!/coherence-common-pof-config.xml"
2011-02-11 15:07:09.916/2.515 Oracle Coherence GE 3.6.1.1 <Info> (thread=DistributedCache:DistributedCacheForSequenceGenerators, member=1): Loaded included POF configuration from "jar:file:/C:/coherence3.6-pushreplication/coherence-3.6-messagingpattern-2.7.4.21016.jar!/coherence-messagingpattern-pof-config.xml"
2011-02-11 15:07:09.916/2.515 Oracle Coherence GE 3.6.1.1 <Info> (thread=DistributedCache:DistributedCacheForSequenceGenerators, member=1): Loaded included POF configuration from "jar:file:/C:/coherence3.6-pushreplication/coherence-3.6-pushreplicationpattern-3.0.3.20019.jar!/coherence-pushreplicationpattern-pof-config.xml"
They both seem to be reading my pof-config.xml file.
I have the following in my sending cluster cache config:
<sync:provider pof-enabled="true">
<sync:coherence-provider />
</sync:provider>
And this in the receiving cache config:
<introduce:config
file="coherence-pushreplicationpattern-pof-cache-config.xml" />
Cheers,
Steve
Edited by: stevephe on 11-Feb-2011 07:05 -
Help: Error when using LSMW (Recording Object Type)
Dear all,
I encountered an error when using "Batch Input Recording" way in LSMW,which is as follows:
I have recorded the transaction MM01 and the source structure and data mapping.When dealing
with "Specify Files",the error comes out with message
--> "File Name 'Converted Data':Max.45 Characters:Remaining saved".
and the subsequent steps cannot be maintained due to the error.Alex,
The name of file for Converted data is a system generated combination of your Project subproject and object followed by lsmw.conv as Project_Subproject_Object.lsmw.conv
System has set a limit of a maximum of 45 characters. It the file name exceeds 45 characters, the system will throw the error.
Just rename the file such that it is with in the 45 charcter limit....you will be fine
Hope this helps
Vinodh Balakrishnan -
Hey,
Class:
package
import flash.display.MovieClip;
import flash.events.Event;
public class Main extends MovieClip
public var enemyA:Array = [];
public var birdA:Array = [];
public var rowNum:int = 2;
private var gap:int = 100;
private var obj_no = 2;
public var enemy1:mychar = new mychar();
public var TheBird:BirdChar = new BirdChar();
public function Main()
// constructor code
createEnemyF();
createBirdF();
this.addEventListener(Event.ENTER_FRAME,loopF);
public function createEnemyF()
for (var i:int = 0; i < rowNum; i++)
for (var j:int = 0; j < obj_no; j++)
enemy1.x = Math.random() * stage.stageWidth - enemy1.width;
enemy1.y = - i * (gap + enemy1.height) - 30.65;
enemyA.push(enemy1);
addChild(enemy1);
public function createBirdF() {
TheBird.x = 270.95;
TheBird.y = 350.95;
birdA.push(TheBird);
addChild(TheBird);
public function loopF(event:Event) {
updateEnemyPositionsF();
updateBirdPositionsF();
hitTestF();
public function updateEnemyPositionsF() {
enemy1.y += 2;
public function updateBirdPositionsF() {
TheBird.x = mouseX;
public function hitTestF() {
if(TheBird.hitTestObject(enemy1))
gotoAndPlay(5);
trace('The Bird Hit Enemy 1');
This conflicts and causes this error:
1046: Type was not found or was not a compile-time constant: MouseEvent
^ ^ Code repeats to all of my event listeners
Thanks for your time.Thanks, i thought it might be this because of previous problems but i seen i already had : import flash.events.Event; so i thought that would be OK!
Second Error:
1180: Call to an undefined method Timer.
I think this is the same sort of thing but what to import to fix this?
So far these are my imports:
import flash.display.MovieClip;
import flash.events.Event;
import flash.events.MouseEvent;
import flash.events.TimerEvent;
Thanks for helping.
Date: Thu, 3 Nov 2011 05:36:22 -0600
From: [email protected]
To: [email protected]
Subject: Error When Using Class
Re: Error When Using Class
created by markerline in Flash Pro - General - View the full discussion
Looks like you imported events.Event but not events.MouseEvent (or some similar syntax) basically you must import MouseEvents separately from other Events.
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4005227#4005227
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4005227#4005227. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Flash Pro - General by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
Type conflict error for method of a class
Hi all,
I am getting a type conflict error in method Read of class CL_SWF_REP_ITEM2OBJECT, the error text is
"A type conflict occurred when the program tried to passan actual parameter to the formal parameter 'EX_WI2OBJ_WIHDR' of the method 'READ' of the class'CL_SWF_REP_ITEM2OBJECT'."
I am calling this method from the FM SAP_WAPI_WORKITEMS_TO_OBJECT. I have checked the type and other things and they all seem fine. Funny enough, all the culprits in question are sap standard objects.
Also the same methods and FM work fine for 4.7 and release 640 of Ecc6.0, however doesnt work for release 700 of ECC6.0
kindly guideHi,
If the method is:
'Instance Method' use -> to refer to the method of the class
If the method is :
'Static Method' use => assignment to refer to the method.
Could you specify the class and method details so that if the error can ba analyzed.
Regards,
George -
Hi,
I am trying to load the data from PSA to write optimised DSO in production and it is throwing me an error 'Short dump :Assign Type conflict error".
I have no routines in the transformations.Source data types are matching with target data types.
Is there any way I could resolve this issue.
Thanks,
ChandraHi,
I had this problem when i was loading the sales cube. the problem was UOM was not maintained in the system. Then I maintained UOM in the bi and solved the issue. JUst check if your data from the source has got the master data in bi.
Thanks
Srikanth -
Multivalue error when using the previous() function
I am getting a multivalue error when using the previous() function on a dimension object in the report. I thought that the previous function was supposed to look at the current report and then look at the previous record's contents. How could this possibly give me a multivalue error when the value is clearly output in the previous row? Anyone have any ideas?
By the way, this is a valuable function for the types of reports that I design. The next() function would be even more valuable.
Thanks for your help.Hi Michael,
Could you please test the following solutions it might help you to resolve the issue.
Solution1:
Use slice and dice to reset all the tables that have #multivalue in it. The only problem with this workaround is they have to do the formatting manually.
Solution2:
Also, test the issue by changing the object to dimension if it is a measure or to measure if it is a dimension.
Regards,
Sarbhjeet Kaur -
Dbms_crypto - avoid error when using different key in lower environment
Hello Experts,
We are using Oracle 11.2.0.2. We are planning to implement dbms_crypto to encrypt few columns. We clone the data from production to lower environment ( DEV, QC).
For the lower environments, we do not want to get the sensitive data from production and do not plan to use same key. Rather than getting an error when using differnt key, is it possible to get a different resultset back.
In other words, we want the implementation to be same across environments but want to use a diffent key in lower environment and get different result (or garbage).
Any suggestions would be greatly appreciated.
While testing this logic, I am getting following error when using differnt key to decrypt. It works fine if I use same key.
Error at line 1
ORA-28817: PL/SQL function returned an error.
ORA-06512: at "SYS.DBMS_CRYPTO_FFI", line 67
ORA-06512: at "SYS.DBMS_CRYPTO", line 44
ORA-06512: at line 19
DECLARE
l_credit_card_no VARCHAR2(19) := '1234 5678 9012 3456';
l_ccn_raw RAW(128) := UTL_RAW.cast_to_raw(l_credit_card_no);
l_key RAW(128) := UTL_RAW.cast_to_raw('abcdefgh');
l2_key RAW(128) := UTL_RAW.cast_to_raw('12345678');
l_encrypted_raw RAW(2048);
l_decrypted_raw RAW(2048);
BEGIN
DBMS_OUTPUT.put_line('Original : ' || l_credit_card_no);
l_encrypted_raw := DBMS_CRYPTO.encrypt(src => l_ccn_raw,
typ => DBMS_CRYPTO.des_cbc_pkcs5,
key => l_key);
DBMS_OUTPUT.put_line('Encrypted : ' || RAWTOHEX(UTL_RAW.cast_to_raw(l_encrypted_raw)));
l_decrypted_raw := DBMS_CRYPTO.decrypt(src => l_encrypted_raw,
typ => DBMS_CRYPTO.des_cbc_pkcs5,
key => l2_key); --**Using different key to decrypt
DBMS_OUTPUT.put_line('Decrypted : ' || UTL_RAW.cast_to_varchar2(l_decrypted_raw));
END;Thank you.If I understand what you are trying to do ... and I may not ... it is not going to work.
SQL> DECLARE
2 l_credit_card_no VARCHAR2(19) := '1612-1791-1809-2605';
3 l_ccn_raw RAW(128) := utl_raw.cast_to_raw(l_credit_card_no);
4 l_key1 RAW(128) := utl_raw.cast_to_raw('abcdefgh');
5 l_key2 RAW(128) := utl_raw.cast_to_raw('zyxwvuts'); -- alternate key used to attempt a different decryption
6
7 l_encrypted_raw RAW(2048);
8 l_decrypted_raw RAW(2048);
9 BEGIN
10 dbms_output.put_line('Original : ' || l_credit_card_no);
11
12 l_encrypted_raw := dbms_crypto.encrypt(l_ccn_raw, dbms_crypto.des_cbc_pkcs5, l_key1);
13
14 dbms_output.put_line('Encrypted : ' || RAWTOHEX(utl_raw.cast_to_raw(l_encrypted_raw)));
15
16 l_decrypted_raw := dbms_crypto.decrypt(src => l_encrypted_raw, typ => dbms_crypto.des_cbc_pkc
s5, key => l_key1);
17
18 dbms_output.put_line('Key1 : ' || utl_raw.cast_to_varchar2(l_decrypted_raw));
19
20 l_decrypted_raw := dbms_crypto.decrypt(src => l_encrypted_raw, typ => dbms_crypto.des_cbc_pkc
s5, key => l_key2);
21
22 dbms_output.put_line('Key2 : ' || utl_raw.cast_to_varchar2(l_decrypted_raw));
23 END;
24 /
Original : 1612-1791-1809-2605
Encrypted : 3534443342333642353141363846384237463732384636373943374630364234323243334539383042323135
Key1 : 1612-1791-1809-2605
DECLARE
ERROR at line 1:
ORA-28817: PL/SQL function returned an error.
ORA-06512: at "SYS.DBMS_CRYPTO_FFI", line 67
ORA-06512: at "SYS.DBMS_CRYPTO", line 44
ORA-06512: at line 20 -
Weblogic 9.2 error when using spring framework and taglibs.
I am getting the following error when using spring binding for a command form class.
Class ExCommandForm
private String firmCode;
public String getFirmCode ()
public void setFirmCode ()
In my jsp I have the following
<spring:bind path="exCommandForm.firmCode">
<input name="<c:out value="${status.expression}"/>" type="text" value="<c:out value="${status.value}"/>" >
</spring:bind>
Ps. exCommandForm is the commandForm declaration in my SiimpleFormController.
When I deploy the application to weblogic 9.2 I get the following error :
<Apr 26, 2007 4:34:44 PM BST> <Error> <HTTP> <BEA-101017> <[weblogic.servlet.int
ernal.WebAppServletContext@1f601c6 - appName: 'BDRui', name: 'BDRui', context-pa
th: '/BDRui'] Root cause of ServletException.
java.lang.ClassCastException: javax.servlet.jsp.jstl.core.LoopTagSupport$1Status
at jsp_servlet._web_45_inf._jsp.__tradesearch._jspService(__tradesearch.
java:1075)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run
(StubSecurityHelper.java:225)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecuri
tyHelper.java:127)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.jav
a:283)
Ps. Deploying application on Tomcat 5.23 works.
Can anyone help on this ?
cheers in advance.
More Info - Using Weblogic 9.2 on UNIX, servlet 2.4, jstl 1.1
regards
Edited by kings_citi at 04/26/2007 9:03 AM
Edited by kings_citi at 04/26/2007 10:35 AM
Edited by kings_citi at 04/26/2007 10:36 AMThe problem doesn't look like it has anything to do with wappers per se. The stack indicates that the JVM died when the persistent store tried to invoke a standard Java synchronize operation. JVM crashes need to be analyzed by a JVM expert, so I second the suggestion to solicit help from JVM experts and/or filing a case with customer support. In the mean-time, you can probably work-around the issue by either (A) ensuring you have a recent version of the JVM installed, or (B) temporarily switching to the Sun JVM.
Regards,
tom
Edited by: TomB on Sep 17, 2010 2:33 PM -
Error when using findbykey method
hi am having this error when using below method cannot assign of type sms1405.common.agrROW TO variable of type oracle.jbo.row[]. type 'oracle.jbo.row[]' excepected but 'sms1405.common.agRROW' found the error is in this line agrRows = (AGRRow)agrRows[0]; the methos is
am using this sample
http://amulyamishras-tech-blog.blogspot.com/2011/01/viewobject-getrow-vs-findbykey.html
where does EmpVORow in EmpVORow empRow =
(EmpVORow)EmpVO.getRow(key); define from above sample
where does EmpVO from EmpVORow empRow =
(EmpVORow)EmpVO.getRow(key); define from above sample
am in Jdeveloper 11.1.2.1.0
Edited by: Tshifhiwa on 2012/07/03 4:36 PMMan, you should be able to find this out your self by now!
Hint: there is one 's' too much in the line you get the error (i guess cut & past error)
Try to understand the code you copied!
Timo -
Oracle giving Block corruption errors when using CDC for sending the data to SQL Server 2012
Hello Friends,
We are facing an error while using CDC with Oracle. It is a "Block corruption" error, which indicates at some level of data corruption. We ran RMAN validate command to scan the database for corruption but it returned with no errors, however he
Alert Log in Oracle is still coming up with the following error. Has anyone experienced this error when using Oracle Standard Edition and SQL 2012 ?
Trace file e:\app\pulse-ad\diag\rdbms\orcl\orcl\trace\orcl_ora_5992.trc
Oracle Database 11g Release 11.1.0.7.0 - 64bit Production
Windows Server 2003 Version V5.2 Service Pack 2
CPU : 4 - type 8664, 4 Physical Cores
Process Affinity : 0x0000000000000000
Memory (Avail/Total): Ph:6782M/24575M, Ph+PgF:12203M/30844M
Instance name: orcl
Redo thread mounted by this instance: 1
Oracle process number: 151
Windows thread id: 5992, image: ORACLE.EXE (SHAD)
*** 2013-12-12 03:04:33.655
*** SESSION ID:(1281.3832) 2013-12-12 03:04:33.655
*** CLIENT ID:() 2013-12-12 03:04:33.655
*** SERVICE NAME:(orcl) 2013-12-12 03:04:33.655
*** MODULE NAME:(xdbcdcsvc.exe) 2013-12-12 03:04:33.655
*** ACTION NAME:() 2013-12-12 03:04:33.655
Lost-write detected for sequence 70856. The lost-write starts occurring in block 11193. The current block being validating is 12930.
Block dump of the first lost-write block:
Flag: 0x1 Format: 0x22 Block: 0x00002bb9 Seq: 0x000114bf Beg: 0x94 Cks:0x68ee
Dump of memory from 0x0000000598D06C00 to 0x0000000598D06E00
598D06C00 00002201 00002BB9 000114BF 68EE8094 [."...+.........h]
598D06C10 00085BF1 0023BDA1 000DE19C 000DE19C [.[....#.........]
598D06C20 0000000C 00000000 2209160A 5BF10000 [..........."...[]
598D06C30 3EB10502 00C0F5CA 0031BDA1 00010205 [...>......1.....]
598D06C40 02B22C6A 038A6D69 00000001 00000000 [j,..im..........]
598D06C50 4D554407 30373230 35BB0206 001100AE [.DUM0270...5....]
598D06C60 0001040A 000D000E 038A6D69 56B25735 [........im..5W.V]
598D06C70 729C0003 E19C0001 000C0006 000D0006 [...r............]
598D06C80 02BB0502 00C0F5CD 0023BDA1 000A0002 [..........#.....]
598D06C90 00C00013 000000D0 00030201 56B25736 [............6W.V]
598D06CA0 03890001 00000000 00000000 002E0105 [................]
598D06CB0 FFFF0003 00C0F5CD 56B25736 3EB10003 [........6W.V...>]
598D06CC0 FFFF0024 0014000C 000C0018 00120014 [$...............]
598D06CD0 09CC0058 E75B0022 0009000F 00085BF1 [X...".[......[..]
598D06CE0 0024BDA1 000DE19D 000DE19D 0000000C [..$.............]
598D06CF0 00000000 2309160A 5BF10000 3EB10502 [.......#...[...>]
598D06D00 00C0F5CD 0020BDA1 00010205 02B22C72 [...... .....r,..]
598D06D10 03900974 00000019 00000000 3030300A [t............000]
598D06D20 33303030 06323132 AE35BB02 0B441100 [0003212...5...D.]
598D06D30 0001040A 000D000E 03900974 56B25736 [........t...6W.V]
598D06D40 729C0003 E19D0011 000C0006 000D0006 [...r............]
598D06D50 02BB0502 00C0F5CD 0024BDA1 00EA0002 [..........$.....]
598D06D60 00270016 000001FC 00032C01 56B25736 [..'......,..6W.V]
598D06D70 00000001 00000000 30393007 002E0105 [.........090....]
598D06D80 FFFF0003 00C0F5CD 56B25736 00000003 [........6W.V....]
598D06D90 FFFF0025 00140052 000C0018 00070035 [%...R.......5...]
598D06DA0 0003000A 00070003 0001001D 00030001 [................]
598D06DB0 00010001 00010001 00010001 00010001 [................]
598D06DC0 00010001 00010001 00010001 00010001 [................]
598D06DD0 00010001 00000001 00010001 00010001 [................]
598D06DE0 00010001 00000014 09720174 00000022 [........t.r."...]
598D06DF0 0009000F 00085BF1 0025BDA1 000DE19A [.....[....%.....]
Block dump of the current block being validating:
Flag: 0x1 Format: 0x22 Block: 0x00003282 Seq: 0x000114c8 Beg: 0x0 Cks:0x312a
Dump of memory from 0x0000000598DDFE00 to 0x0000000598DE0000
598DDFE00 00002201 00003282 000114C8 312A8000 [."...2........*1]
598DDFE10 50424703 31303607 34353335 69745319 [.GBP.6015354.Sti]
598DDFE20 6E696C72 72502067 6375646F 4C207374 [rling Products L]
598DDFE30 4E206474 C3025650 0380013D 0457454E [td NPV..=...NEW.]
598DDFE40 4E1E09C2 1E09C204 10C2024E 1E09C204 [...N....N.......]
598DDFE50 09C2044E C2024E1E 03C30510 021B0929 [N....N......)...]
598DDFE60 C3053DC3 0F192602 2602C305 C3050F19 [.=...&.....&....]
598DDFE70 0C1A6203 5102C105 C2041F4E 044E1E09 [.b.....QN.....N.]
598DDFE80 4E1E09C2 0410C202 4E1E09C2 1E09C204 [...N.......N....]
598DDFE90 10C2024E 2903C305 78071B09 011D0B71 [N......)...xq...]
598DDFEA0 BF020101 1FBF0215 4E018001 53014E01 [...........N.N.S]
598DDFEB0 0723002C 0B0C7178 0A3C3C18 30303030 [,.#.xq...<<.0000]
598DDFEC0 33373030 4D033337 47034255 36075042 [007373.MUB.GBP.6]
598DDFED0 38333936 4E113331 2065776B 74616C50 [693813.Nkwe Plat]
598DDFEE0 6D756E69 56504E20 0B0AC303 4E038001 [inum NPV.......N]
598DDFEF0 C2045745 0459512E 59512EC2 5253C203 [EW...QY...QY..SR]
598DDFF00 512EC204 2EC20459 C2035951 C3055253 [...QY...QY..SR..]
598DDFF10 1B092903 0B0AC303 3C04C305 C3053239 [.).........<92..]
598DDFF20 32393C04 4F08C305 C105114F 1F4E5102 [.<92...OO....QN.]
598DDFF30 512EC204 2EC20459 C2035951 C2045253 [...QY...QY..SR..]
598DDFF40 0459512E 59512EC2 5253C203 2903C305 [.QY...QY..SR...)]
598DDFF50 78071B09 01190A71 C0030101 C0034709 [...xq........G..]
598DDFF60 8001330A 4E014E01 002C5301 71780723 [.3...N.N.S,.#.xq]
598DDFF70 3C180B0C 30300A3C 30303030 33373337 [...<<.0000007373]
598DDFF80 42554D03 50424703 31304207 344C5131 [.MUB.GBP.B011QL4]
598DDFF90 6F725020 63657073 614A2074 206E6170 [ Prospect Japan ]
598DDFFA0 646E7546 64724F20 44535520 30302E30 [Fund Ord USD0.00]
598DDFFB0 04C30331 03800133 0557454E 5B1603C3 [1...3...NEW....[]
598DDFFC0 03C30521 04215B16 1F4004C3 1603C305 [!....[!...@.....]
598DDFFD0 C305215B 215B1603 4004C304 03C3051F [[!....[!...@....]
598DDFFE0 031B0929 043304C3 4D245AC2 245AC204 [).....3..Z$M..Z$]
598DDFFF0 02C3054D 040A1A18 494002C1 1603C305 [M.........@I....]
*** 2013-12-12 03:05:07.984
** LOGMINER WARNING - Invalidated 6 LCRs **
Complete dump of first invalid START LCR follows:
++ LCR Dump Begin: 0x0000000532C004E0 - CANNOT_SUPPORT
op: 255, Original op: 3, baseobjn: 0, objn: 233316, objv: 1
DF: 0x00000002, DF2: 0x00000000, MF: 0x00000000, MF2: 0x00000000
PF: 0x40000001, PF2: 0x00002000
MergeFlag: 0x00, FilterFlag: 0x00
Id: 0, iotPrimaryKeyCount: 3, numChgRec: 4
NumCrSpilled: 0
RedoThread#: 1, rba: 0x0114c8.0001c6ce.00d4
scn: 0x0003.56b593be, xid: 0x0008.00c.00100d85, pxid: 0x0008.00c.00100d85
ncol: 0newcount: 0, oldcount: 0
LUBA: 0x3.c109c0.c.15.38f64
Thanks
DeeHi Dee,
Thank you for your question.
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
Regards,
Mike Yin
TechNet Community Support -
Compilation error when used SET or MULTISET operator on nested tables
Dear All,
I am getting Compilation error when used SET or MULTISET operator on nested tables inside a procedure.
This is working fine in other DB installations of 10g but does not work in another 10g DB.
it says "wrong number of parameter or datatype used in SET"
Can any one suggest what went wrong here?
Thanks in advance.Hi,
Thanks for ur reply...
Since MULTISET and SET operators are the new additions in base 10g release for manipulation of nested tables data, I am surprised that same is working in similar 5 DBs installations with 10.2.0.1.0 version, but does not work in the sixth.
SET and MULTISET operators are used inside the PL/SQL procedure which is getting compiled in the above mentioned 5 DBs but not in sixth DB.
it gives
On line: 3112
PLS-00306: wrong number or types of arguments in call to 'SET'
Hope this clarifies the issue... -
Error when using filter on date column in interactive report
Hi,
I'm getting the following error when using the filter on a date column. None of the criteria in the filter list work. All give me the same error but when I use the filter on a column feature (in the search bar) and use ">" and "<" those work.
Can someone please help me????
" Settledate is in the last 2 years
ORA-30175: invalid type given for an argument ORA-02063: preceding line from MAINDATA "I have a similar problem . I have an interactive report based on resultset stored in a collection; since all the columns of a collection are of string datatype, I convert the columns to appropriate datatypes before its returned to the user; everything works as desired except when I try to filter on a data column , I get a ORA-01858: a non-numeric character was found where a numeric was expected .
I turned on debug mode and am copying the output here , column c009 which is aliased to 'C' is the one that I am trying to apply the filter on
select
ROWID as apxws_row_pk,
"C001",
"C002",
"C003",
"C004",
"C005",
"C006",
"C007",
"C008",
"CHECKOUTTIMESTAMP",
"C010",
"C011",
"TO_NUMBER(C012)",
"TO_NUMBER(C013)",
"TO_NUMBER(C014)",
"C015",
"C016",
"C017",
"TO_NUMBER(C018)",
"C",
count(*) over () as apxws_row_cnt
from (
select * from (
Select c001,c002,c003,c004,c005,c006,c007,c008,to_date(c009,'dd-MON-yy HH24.MI') checkouttimestamp,
cast(to_date(c009,'dd-MON-yy HH24.MI') as timestamp) c,
--TO_TIMESTAMP(c009,'dd-MON-yy HH24.MI') c1 ,
trunc(to_date(c009,'dd-MON-yy HH24.MI')) checkoutdate,
c010,c011,to_number(c012),to_number(c013), to_number(c014),c015,c016,c017,to_number(c018) from apex_collections where collection_name = 'IR_BOOKSALES'
) r
where ("C" between systimestamp - ((1/24) :APXWS_EXPR_1) and systimestamp)*
) r where rownum <= to_number(:APXWS_MAX_ROW_CNT)
order by ROWID
0.04: IR binding: ":APXWS_EXPR_1"="APXWS_EXPR_1" value="1"
0.04: IR binding: ":APXWS_MAX_ROW_CNT"="APXWS_MAX_ROW_CNT" value="2000"
ORA-01858: a non-numeric character was found where a numeric was expected
I have tried to convert c009 to date, timestamp and timestamp with time zone datatypes ; they all return the same error ,but all 3 datatypes work fine with systimestamp when I run them in sqlplus. Any help would be appreciated. -
Photoshop CS4 "Program Error" when using Text tool
Hello. I was having problems with Photoshop displaying a "Program Error" every so often, so I deleted the preference file and all seemed good. But after deleting the preference file for my Photoshop CS4 and re-launching Photoshop, the text tool causes Photoshop to display a Program Error when using the tool. It never did this before. Should I reinstall Photoshop? I am using a Powermac G5 running 10.5.8. I have already tried repairing the disk permissions.
ThanksThats kinda what I thought too, but the problem started happening randomly. It started when we were trying to use photomerge with large photos. The program just started giving the program errors. I still think it may be a font problem, but without going through my 2000+ fonts and disabling them one by one, how can I resolve this issue?
Thanks
Maybe you are looking for
-
Hi SAP Gurus My company would like to put credit limits on vendors (creditors), where does one put this? Please help Theo Moderator: Please, seacrh SDN
-
At this rate initial BU will take 61 days...
I set up my TC up on March 4th. I had no idea it would be SO SLOW and I started the backup wirelessly. It's been working on the initial BU since then and so far it's backed up 4.4 GB out of 135.85 GB. At 2.2 GB a day, it should be finished sometime i
-
Hi Everybody, I have configured alerts in Development system PI 7.0. Can we transport these Alerts to QA or we need to do re configuration for Alerts in different environments. Note : I am referrring to the configuration in ALRTCATDEF and Alert Confi
-
What gives with apple removing FTP from sharing and where did windows file sharing go? ugh why is apple removing features?
-
Hi , Our Client needs to know what are the JE's and A/R Invoices that has been invoiced for some particular items. We need a report like this. Cust Code==Cust Name==Inv No==Inv Date==Inv Value==JE No==Bal Due Debit==Bal Due Credit Cust 1 Cust Subtot