Type Conflict Error with RFC FM

Hi Guys,
I am getting "Type conflict when calling a function module" in XI.
Here is the full error.
<rfc:ZFIBAPI_ACC_DOCUMENT_POST.Exception xmlns:rfc="urn:sap-com:document:sap:rfc:functions"><Name>RFC_ERROR_SYSTEM_FAILURE</Name><Text>Type conflict when calling a function module.</Text><Message><ID>RFC_ERROR_SYSTEM_FAILURE</ID><Number>341</Number></Message><Attributes><V1>CALL_FUNCTION_CONFLICT_TYPE</V1></Attributes></rfc:ZFIBAPI_ACC_DOCUMENT_POST.Exception>
Is it something with the XI side or SAP side.
Thanks
Senthil

is there any solution to the problem you mentioned????
"The object can only be displayed
Message no. MO705
Diagnosis
You tried to change an object that cannot currently be edited using the editor for complex objects. Possible causes:
The object is a sorted table
The object contains sorted tables
System Response
The system can only display the object"
Please reply back as we need it very urgently... thanks
Mani

Similar Messages

Assign Type conflict error

Hi,
I am trying to load the data from PSA to write optimised DSO in production and it is throwing me an error 'Short dump :Assign Type conflict error".
I have no routines in the transformations.Source data types are matching with target data types.
Is there any way I could resolve this issue.
Thanks,
Chandra

Hi,
I had this problem when i was loading the sales cube. the problem was UOM was not maintained in the system. Then I maintained UOM in the bi and solved the issue. JUst check if your data from the source has got the master data in bi.
Thanks
Srikanth

Type conflict error for method of a class

Hi all,
I am getting a type conflict error in method Read of class CL_SWF_REP_ITEM2OBJECT, the error text is
"A type conflict occurred when the program tried to passan actual parameter to the formal parameter 'EX_WI2OBJ_WIHDR' of the method 'READ' of the class'CL_SWF_REP_ITEM2OBJECT'."
I am calling this method from the FM SAP_WAPI_WORKITEMS_TO_OBJECT. I have checked the type and other things and they all seem fine. Funny enough, all the culprits in question are sap standard objects.
Also the same methods and FM work fine for 4.7 and release 640 of Ecc6.0, however doesnt work for release 700 of ECC6.0
kindly guide

Hi,
If the method is:
'Instance Method' use -> to refer to the method of the class
If the method is :
'Static Method' use => assignment to refer to the method.
Could you specify the class and method details so that if the error can ba analyzed.
Regards,
George

Type conflict error when using TS_EngineGetSeqFile

I was trying to use function TS_EngineGetSeqFile to load a sequence file build in TestStand 4.0, and I got a OLE error showing me that I have a type conflict with "CommonResults". Does anyone know how to solve this problem??

Hi huizhong,
The type conflict dialog you are seeing is evidence that the copy of CommonResults (an NI-Installed type) in the sequence file has the same version but different settings than the currently loaded CommonResults type definition. CommonResults
is stored in almost all of the built in TestStand type palettes which
automatically get loaded when you open TestStand. Because of this, it
becomes a part of the global type usage list in the Engine. If you
didn't make any changes to CommonResults yourself, it is likely you have inherited a type virus from somewhere and I suggest you take measures to correct the problem.
A
type virus can spread when you tell TestStand to resolve a type
conflict by using the version from the file you are currently opening
(as opposed to the currently loaded type in the global type usage
list). Once the "new" type is copied over to the type palettes, it will
then get loaded every time TestStand runs. At this point, if you open
up more files that use this same type and choose to use the currently
loaded type when the type conflict dialog shows, TestStand will copy
the "new" version into the file - thus the spread or viral like
behavior.
In order to correct the problem, you can either:
Manually open each and every infected file and replace the invalid type with the valid type or...
Use the Type Differ tool that I wrote to inspect each file pair and merge the conflict automatically
I
realize that using the Type Differ at this point is still "manual" in
the sense that you must open each file pair and merge the conflict, but
hopefully in your case there aren't that many affected files. To that
end, I am working on a Batch version of the Type Differ that can diff
and merge entire directory structures automatically. Let me know if you
are interested in using such a tool and I will post a link when
development has reached a beta version.
Regards,

Type Conflict Error

Hi Experts
I Created One FM Called ZIN_INVOICE . . . .
When I AM Calling That In WEB DYNPRO Code Wizard It Throwing ERROR
Type conflict when calling a function module error web dynpro abap
Can Any One Help
BY
Srinivasan.r

Hello!
You have to provide the same vars types when you call the FM.
Parameter: p1 of type p_pernr for example, needs a var of the type p_pernr you cant use STRING.
Try to find out the parameter that dont have the same type when you call it, than when you define it in your FM.
Bye

Type Mismatch Error with Window Class

i have been trying in vain to recreate various examples that
spawn popup windows. i have been certain to follow instructions
carefully in each example (from both livedocs and the forums and
other sites)...copying and pasting the code where applicable. yet,
nothing works. everytime i am greeted with a Type Mismatch error
when I compile. i have seen threads on discussion boards where a
solution was posted that apparantly worked for everyone else...but
not me. at this point, all i want to do is spawn a pop up window
that i can control the content, title, size and placement with AS.
i'm using flash 8 on windoze xp pro.

actually, that is one of the threads i was referring to when
i said that i found info from other locations that didnt work.
but wait...theres more...
after posting yesterday i discovered that the issue is
related to my desktop for some weird reason. the following code
works fine on my laptop but not on my desktop. both machines have
the same OS...the same version and copy of Flash (from the same
disc no less) and the same configuration. yet, the laptop produces
the desired result while the desktop gives me a type mismatch error
when i compile. i havent had time to look into it further...i
simply finished development on the laptop and copied the final SWFs
to the network. yet its still a bit troubling. here is the code...

Type 10 Error with Outlook Express 5.0

We have a PowerMac running OS 9.2.2 that can't open Outlook Express. Each time we try it crashes the system with a Type 10 error.
I've tried reinstalling Outlook with no success.

Hi, Dan -
Try also compacting the database files. To do that, with Outlook Express quit, hold down the Option key and start Outlook Express up - you'll get a splash screen offering to compact the databases. Click yes.
It may also help to increase the Preferred memory allocation for Outlook Express. Adding 20 or 30 thouseand, or even more if you have the RAM to support it, is not excessive.
Article #18278 - Assigning More Memory to an Application

Conflicts & Errors with BB Desktop V.5.0.1.....Can't Uninstall Program

Ever since I installed Desktop Mgr. V. 5.0.1 from Verizon for my Tour, I've had a problem. A window frequently pops up on my screen that says “Please wait while Windows configures Roxio Media Manager.” Windows then tries to install Roxio Media Manager. I couldn’t find either Roxio or Media Manager to uninstall it when I opened my Windows Control Panel. I found a Roxio folder in Program Folders and I deleted it. I then opened Registry Editor and removed a Roxio folder from that as well. A few minutes later, a Windows Installer window popped up on my screen and said (re. Roxio Media Manager) “Unable to find a certificate file.” Now, I'm trying to uninstall V. 5.0.1 and go back to V. 4.7 I can't even do that because when I attempt the uninstall, I get an error message saying that the computer is attempting another installation/uninstall and I can't install or uninstall two things at the same time. In other words, I can't get 5.0.1 to stop trying to configure Media Manager long enough for me to uninstall V.5.0.1. Any ideas on how to handle this?

Media Manager is an integral part of DTM...there is no separate install from which to uninstall. Hence, what matters is which version of DTM 5.0.1 you installed....some come with the embedded MM and others do not.
I suggest the following steps (insert plenty of reboots of your PC...not just restarts, but full power down reboots). Also, it is advised that you be logged into the PC on an account with full admin rights. Further, under Vista, use the "Run As Administrator" option for everything.
1) Remove your device OS update package from your PC (add/remove programs)
2) Cleanly uninstall the RIM DTM software:
KB02206 How to perform a clean uninstall of BlackBerry Desktop Software
3) Get a fresh download of the RIM DTM software:
https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
Choose the version that either has or does not have Media Manager based on your circumstances. Also choose the version that is newest and (if applicable) compatible with your PIM (if you are synchornizing via USB):
KB12268 Applications supported by BlackBerry Desktop Manager for synchronization
4) Download (to your PC) a fresh copy of your device OS package from your carrier:
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
5) Install DTM to your PC
6) Install (also to your PC), the device OS package
7) Start the organizer configuration over:
KB17022 How to configure organizer applications for synchronization using BlackBerry Desktop Manager
Hopefully that will get things going again.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Type Conflict error for "CommonResult"

Hi,
I am Getting TypeConflictError for "CommonResults" under StandardType on opening the sequence file.
what counld be the possible cause for this error?
I am not altering the type in my sequence file anywhere.
Thanks
Bharathi

Hi,
What Teststand version are you using?
Dont forget it's not only the Client SequenceFile but also the Process Model sequence file.
After you tried using the Types Diff tool to identify where the problem lies.
(http://forums.ni.com/t5/NI-TestStand/error-SpecifyExeByExpr-error/m-p/1124170#M28903)
This sequencefile you are opening, do you know where this sequence file has come from?
Regards
Ray Farmer

Error with RFC receiver channel

Hi,
Getting this below error for receiver RFC channel. Can anyone please look into this error urgently.
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.lang.NullPointerException: while trying to invoke the method com.sap.aii.adapter.rfc.core.config.RfcConfig.getChannel() of a null object returned from com.sap.aii.adapter.rfc.core.client.RfcClientPool.getConfig()

Hi,
Restarted but no result. Getting another error :
Delivering the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling Z_SD_XI_BAPI_CREATE_VA_SLSORD3 in remote system (RfcClient[CC_RFC_Z_BRONZE_VA_RCVR]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Could not open file /usr/sap/XP3/interfaces/va/br_vaout_20140401_04204.
I do not understand why RFC receiver channel is giving this error.
Can any one please look into it on priority.I need it to get resolved very soon.
Thanks

Type conflict error - in Transformations

Hi all,
I have done Transformation euregine of Transfer/Update rules for 0FI_AA_006 DS/IS I have activated and loaded till PSA.When Iexecuting my DTP it is showing an dump stating that " Dump: ABAP/4 processor: ASSIGN_TYPE_CONFLICT " .
I have seen all assignments of my transformations ,all are correct( default given by SAP ),why I am getting that error did any one faced that error. ihave faced that problem previously also for other data source in FI.Shall Ihave to install any notes for that ?
Regards
KK

We also encountered this error please follow the below mentioned step.Hopefully U'll b able to make it up
If the error occurs in a note you implemented or in Support Package 06 or higher, you must follow the manual troubleshooting steps<AS Char>described below.
Import Support Package 06 for SAP NetWeaver 2004s BI (BI Patch 07 or SAPKW70006) into your BI system. The Support Package is available when Note 0872278 "SAPBINews BI 7.0 Support Package 06", which describes t his Support Package in more detail, is released for customers.
In urgent cases, you can use the correction instructions.
You must then proceed as follows:
Manual steps for troubleshooting:
The transformation(s) involved must be newly activated or you must reset the generation status:
Carry out the following steps to reset the status:
Call Transaction 'RSSGPCLA'
Place the cursor on the 'RSTRAN_MASTER_TMPL' program class.
Choose the 'Set status' pushbutton (CTRL+F3)

Confliction errors with iPhone and Mac Mail

I am having constant issues with the iPhone causing my Mac Mail to dislay "The POP server *** rejected the password for user *******" dialog box when the iPhone and/or any of my computers try to pick up mail at the same time on the same accounts. The password and user name are correct. Has anyone found a setting to enable multiple computers and iPhone to collect mail from the same accounts without issue? Does this same issue happen with Entourage?

A POP account is not designed to be accessed by multiple email clients at the same time and the email client used makes no difference in this regard at the incoming mail server for the account.
This is usually not a problem with an IMAP account. I don't have this problem with my .Mac account - the Mail.app on my PB runs 24/7 checking my email accounts for new messages every 15 minutes. Since using the iPhone to access my .Mac account and a business POP account, the POP account on my PB is taken offline but not my .Mac account. I've accessed my .Mac account with both at the same time with no problems.
If you are unable to switch to an IMAP account, you will need to turn off having the POP account checked for new messages automatically by the Mail.app.

Error:Type conflict when calling a function module RFC_ERROR_SYSTEM_Failure

Hi Experts,
When I run my Application in Portal, i am getting the following error.
Type conflict when calling a function module., error key: RFC_ERROR_SYSTEM_FAILURE
When I execute the BAPI, it is getting executed.
My Bapi Strucute:
Import Parameters
IM_MAT_Search --> ZPTIP_MAT --> Import Parameters
Tables
IT_INFO_REC --> ZMM_GET_ITEM --> Output Parameters
When I import the model, i am getting the structure like this
BAPI_Name > ZMM_BAPI_Input> IM_MAT_Search(respective Parameters) , Output (respective Tables and their parameters)
> ZMM_Input1> Parameters
This is the way, how i am executing in webdynpro java
Zmm_Bapi_Ptip_Search_Input eleInput = new Zmm_Bapi_Ptip_Search_Input();
wdContext.nodeZmm_Bapi_Ptip_Search_Input().bind(eleInput);
Zptip_Asset eleInputAsset = new Zptip_Asset();
eleInputAsset.setSearch("ACRS");
wdContext.nodeZptip_Asset().bind(eleInputAsset);
eleInput.setIm_Ast_Search(eleInputAsset);
wdContext.nodeZmm_Bapi_Ptip_Search_Input().bind(eleInput);
wdContext.nodeZmm_Bapi_Ptip_Search_Input().currentZmm_Bapi_Ptip_Search_InputElement().modelObject().execute();
wdContext.nodeOutput().invalidate();
Please let me know, how to do the same.
Thanks in advance.
Regards,
Palani

Hi David,
I checked for the Parameter of setIm_Ast_Search, it is of Zptip_Asset.
Hi Saleem,
When I changed the same, i am getting the Type conflict error,
Type conflict when calling a function module., error key: RFC_ERROR_SYSTEM_FAILURE
Please let me know,what can be done in this regard to solve the problem.
My BAPI Structure when imported as model
SearchBAPI
--> ZMM_BAPI_SEARCH_INPUT
> IM_AST_SEARCH(zPTIP_ASSET)
>Zptip_Asset
>Search (Parameter)
> OutPut(ZMM_BAPI_Search_Output)
>IT_Asser_Rec(ZMM_Asset)
>ZMM_Asset
>TXT100 (output Parameter)
--> ZMM_BAPI_SEARACH_OUTPUT
--> ZPTIP_ASSET
>Search (Parameter)
Thanks & Regards,
Palani
Edited by: Palani Appan on Nov 11, 2009 5:31 PM

Select options field is giving type conflict when calling a class.

hai guys,
i have a field SALESORD in subscreen as a SELECT-OPTIONS field for vbeln.
Now i created a class,with SALESDETAILS of type TABLE as a parameter of a method.
when i call the method(after creating an object) the SALESDETAILS parameter is supposed to take the SALESORD field.
but it gives me a type conflict error.
i wonder why..coz both fileds have same type..
how to resolve the issue..
helpful answers will be rewarded.
thank you.

Hi Shravan,
Pass the select-options vbeln values into a temporary table and pass this table into the method.
<b>Reward for helpful answers</b>
Satish

AutomationParameter Type Conflict

Hi Guys,
I have been trying to use a custom station model with a sequence file however whenever I open it I get a AutomationParameter Type Conflict Error Code: -17329 Source: TSAPI as shown in the picture attached. I can normally solve other type conflicts by just making sure the 2 Types are the same in both sequences however in this case I can't really see where the types are to even compare them. Any help would be appreciated
Regards
Kewal
Solved!
Go to Solution.
Attachments:
error.JPG ‏31 KB

Kewal -
You may want to use the Type Differ tool that is included in the TestStand Toolkit - Large Application Development that is available on ni.com/labs. This tool can be very helpful in merging the types in a number of different files to the same definition as the types defined in a master file that you specify.
Hope this helps.
Manooch H.
National Instruments

Type Conflict Error with RFC FM

Similar Messages

Maybe you are looking for