Type conflict in OI

Hello,
I have several sequence files that make use of sequences in one common sequence file. There are two container types defined in that common sequence file (not, unfortunately, in a type INI file, I inherited it that way).
When I try to start the master sequence, that starts all others, from an Operator Interface (this is the full-featured MFC example coming with TestStand 4.1), then I get a type conflict for both these types and the recommendation to open the conflicting files in the sequence editor and resave them.
The sequence editor does not show any type conflicts. Resaving the files does not remove the error in the Operator Interface.
Any suggestions? (this is all TestStand 4.1).
Best regards
Peter

Peter,
i take it that both types are defined in the same (*.seq) file. The dialog tells that there are more than one file involved in the conflict. Is that correct?
Is it possible, that the UI loads an older version of the sequence file by default as well?
What is the general setup in the UI when the conflict occurs?
Maybe you can attach some screenshots of the dialog in order to clear things a bit up.
thanks,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Similar Messages

CTE : ERRO MONITOR ( Type conflict in program /XNFE/SAPLGROUPING )

Ola Sap Experts, preciso de uma mão de vcs.
Estou em um ambiente de um cliente onde o monitor de outbound de CTe, quando se tenta acessar o detalhe da CTe ou qualquer outra ação é gerado o erro "Type conflict in program /XNFE/SAPLGROUPING. (termination; RABAX_STATE)" é gerado um dump na ST22.
O cliente nao tem qualquer customizacao desse monitor usa de maneira standart e se encontra no sp 16 do SLL-NFe rodando em base de um PI 7.31 dual stack.
Alguem já passou ou esta passando por isso ?

Prezados,
Alguém conseguiu resolver o DUMP?
Estamos enfrentando o mesmo problema no projeto, mas o erro só ocorre quando testamos um cenário com IPI Return.
Alguma dica?
Obrigada,
Tatiana Augusto

Type conflict with ASSIGN in program CL_WD_ADOBE_SERVICES==========CP

I am trying to display an interactive Adobe Form in the webdynpro for abap.
But i'm getting this error:
The following error text was processed in system AED : Type conflict with ASSIGN in program CL_WD_ADOBE_SERVICES==========CP .
The error occurred on application server AIERD_AED_00 and in work process 1 .
The termination type was: RABAX_STATE
The ABAP call hierarchy was:
Method: NODE_2_DDIC of program CL_WD_ADOBE_SERVICES==========CP
Method: DATASOURCE_2_FM_PARAMS of program CL_WD_ADOBE_SERVICES==========CP
Method: CREATE_PDF_DDIC of program CL_WD_ADOBE_SERVICES==========CP
Method: CREATE_PDF of program CL_WD_ADOBE_SERVICES==========CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/CADOBE==================CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/CADOBE==================CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C7STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program CL_WDR_VIEW_ADAPTER===========CP
Is there any problem with some Adobe config or somewhere a mistake in my code.

Follow this thread
[Displaying a Smartform as PDF in WDA;
Thanks
Siva

Type conflict with ASSIGN in program in Release time(ESS)

Hi All,
On clicking on the link "Release Working Time Data" from EP While releasing working time below exception is being thrown.
com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Type conflict with ASSIGN in program SAPLHRXSS_CAT_WEBDYNP., error key: RFC_ERROR_SYSTEM_FAILURE
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
     at com.sap.xss.hr.cat.release.blc.FcCatRelease.rfcExecute(FcCatRelease.java:494)
     at com.sap.xss.hr.cat.release.blc.FcCatRelease.rfcDoInit(FcCatRelease.java:424)
     at com.sap.xss.hr.cat.release.blc.FcCatRelease.onInit(FcCatRelease.java:377)
     at com.sap.xss.hr.cat.release.blc.wdp.InternalFcCatRelease.onInit(InternalFcCatRelease.java:274)
     at com.sap.xss.hr.cat.release.blc.FcCatReleaseInterface.onInit(FcCatReleaseInterface.java:194)
     at com.sap.xss.hr.cat.release.blc.wdp.InternalFcCatReleaseInterface.onInit(InternalFcCatReleaseInterface.java:166)
     at com.sap.xss.hr.cat.release.blc.wdp.InternalFcCatReleaseInterface$External.onInit(InternalFcCatReleaseInterface.java:258)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:922)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:891)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1084)
     at com.sap.xss.hr.cat.release.vac.entry.VcCatReleaseEntry.onInit(VcCatReleaseEntry.java:270)
     at com.sap.xss.hr.cat.release.vac.entry.wdp.InternalVcCatReleaseEntry.onInit(InternalVcCatReleaseEntry.java:174)
     at com.sap.xss.hr.cat.release.vac.entry.VcCatReleaseEntryInterface.onInit(VcCatReleaseEntryInterface.java:189)
Pls help to resolve the isuue
Thanks,
JB

Hard closed

Type conflict with ASSIGN in BADI for Virtual Key Figures

We get the below error dump in ST22 when executing BEx queries that contain virtual key figures.
error message - 'Type conflict with ASSIGN in
program "ZCL_IM_THR_RSR_OLAP_BADI======CP".'
We have a BADI implementation that calculates few virtual key figures included in some infocubes & multiproviders. The error would arise if we execute two queries (containing common Virtual Key figures) one after the other without closing the first query.
We found a note "Note 1237689 - Virtual chars. and key figures in input-ready querys" that could be relevant to our issue and wanted to apply this note but unfortunately the note is only applicable to SAPKW70016 to SAPKW70018 and we are support pack 15.
Can you please advise what the problem could be/suggest corrections for the same.

Hi Kulmohan,
Did you fix your issue? We are facing the same issue. Could you please let me know if you have any solution for this issue,
Thank you,
Mike

Assign Type conflict error

Hi,
I am trying to load the data from PSA to write optimised DSO in production and it is throwing me an error 'Short dump :Assign Type conflict error".
I have no routines in the transformations.Source data types are matching with target data types.
Is there any way I could resolve this issue.
Thanks,
Chandra

Hi,
I had this problem when i was loading the sales cube. the problem was UOM was not maintained in the system. Then I maintained UOM in the bi and solved the issue. JUst check if your data from the source has got the master data in bi.
Thanks
Srikanth

Type conflict when calling a function module (field length)

Dear All,
            I am getting this following error while executing: Type conflict when calling a function module (field length)
This is piece of coding i have writern in my action button.
method SEARCH_MATERIAL .
data:
        node_mat_input TYPE REF TO if_wd_context_node,
        node_mat_output TYPE REF TO if_wd_context_node,
        material TYPE BAPIMATDET-MATERIAL,
        itab TYPE TABLE OF BAPIMATDOA.
node_mat_input = wd_context->get_child_node( 'NODE_MAT_INPUT' ).
node_mat_output = wd_context->get_child_node( 'NODE_MAT_OUTPUT' ).
node_mat_input->get_attribute( EXPORTING name = 'MATERIAL'
                                 IMPORTING value = material ).
CALL FUNCTION 'BAPI_MATERIAL_GET_DETAIL'
    EXPORTING
      material                    = material
    PLANT                       = plant
    VALUATIONAREA               =
    VALUATIONTYPE               =
    MATERIAL_EVG                =
   IMPORTING
     MATERIAL_GENERAL_DATA       = itab
    RETURN                      =
    MATERIALPLANTDATA           =
    MATERIALVALUATIONDATA       =
node_mat_output->bind_table( itab ).
endmethod.
Attributes are:
Node name = INPUT its structure is BAPIMATDET
INPUT attributes = MATERIAL of type BAPIMATDET-MATERIAL
Thanks,
Gopi.

Hi Amit,
           I have used service call to fetch records from that bapi..
The following is the code generated by service call:-
METHOD execute_bapi_material_get_deta .
declarations for context navigation
DATA:
    node_bapi_material_get_de   TYPE REF TO if_wd_context_node,
     node_exporting   TYPE REF TO if_wd_context_node,
     node_material_general_dat   TYPE REF TO if_wd_context_node,
     node_importing   TYPE REF TO if_wd_context_node,
      lri_element    TYPE REF TO if_wd_context_element.
declarations for fuba parameters
data:
    stru_c_material_general_dat    TYPE if_componentcontroller=>element_material_general_dat.
DATA:
    attr_material    TYPE bapimatdet-material,
    attr_plant    TYPE bapimatall-plant.
get all involved child nodes
node_bapi_material_get_de = wd_context->get_child_node( `BAPI_MATERIAL_GET_DE` ).
node_exporting = node_bapi_material_get_de->get_child_node( `EXPORTING` ).
node_material_general_dat = node_exporting->get_child_node( `MATERIAL_GENERAL_DAT` ).
node_importing = node_bapi_material_get_de->get_child_node( `IMPORTING` ).
get input from context
node_importing->get_attribute(    EXPORTING      name = `MATERIAL`
                                                     IMPORTING      value = attr_material ).
node_importing->get_attribute( EXPORTING       name = `PLANT`
                                                          IMPORTING       value = attr_plant ).
the invocation - errors are always fatal !!!
CALL FUNCTION 'BAPI_MATERIAL_GET_DETAIL'
    EXPORTING
      material =                        attr_material
      plant =                           attr_plant
"      valuationarea =                   wd_This->Valuationarea
"      valuationtype =                   wd_This->Valuationtype
"      material_Evg =                    wd_This->Material_Evg
    IMPORTING
      material_general_data =           stru_c_material_general_dat
"      return =                          wd_This->Return
"      materialplantdata =               wd_This->Materialplantdata
"      materialvaluationdata =           wd_This->Materialvaluationdat
node_material_general_dat->bind_structure( stru_c_material_general_dat[] ).
ENDMETHOD.
                             but the problem is I am getting the following error while compiling...
" stru_c_materialplantdata " is not an internal table - the " OCCOURS n" specification is missing.
Thanks,
Gopi.
Edited by: Yegalaivan on Nov 18, 2009 8:30 AM

Dynamic type conflict during the assignment of references. - Error while generating proxy in the backend

Hi All,
I get a short dump while generating a proxy in the backend.I give the package and the prefix and end up with a short dump.
Does any one know why this mught come up
"Dynamic type conflict during the assignment of references."
background: I imported a WSDl provided by legacy into PI and created service interfaces and then trying to generate a proxy class while i get this error.
Thanks.

Hi Shyamsundar,
I will explain a problem that I usually see in some developments:
XSD originally:                                  XSD transformed:
Root                                                     -> Root
Tag 1 type int                                    -> Tag 1 type int
Tag2 type string                               -> Tag2 type string
Tag3 type any                                  - Tag3 type string
Normally the tag3 should have a XML inside. Then the ABAPers have to construct the tag3 with a CDATA structure (CDATA is used to put in an XML tag more XML tags inside like a text and no to be interpreted).
Later in SAP PI you can extract the cdata with an XSL, you can find some examples in the SCN.
I don’t like to convert the whole XML in only one string tag, because this makes difficult the develop for the ABAPers, although the work inside the PI is very easy because with an XSL you can extract the whole message easily. (You can find some examples in the SCN)
Regards.

ERROR: -Type conflict when calling a function module

hi to all,
when iam executing the program in browser   Type conflict when calling a function module error is showing, i have bind all the attribute correctly still iam getting error, WHEN I CLICK ON THE SEARCH BUTTON DATA IS NOT COMING TO MY TABLE ITAB1 plz help me....
DATA:
      NODE_IP_SELECTION                   TYPE REF TO IF_WD_CONTEXT_NODE,
      ELEM_IP_SELECTION                   TYPE REF TO IF_WD_CONTEXT_ELEMENT,
      STRU_IP_SELECTION                   TYPE IF_PLANNING_HISTORY=>ELEMENT_IP_SELECTION ,
      ITAB TYPE TABLE OF ZSL_PL_UPDATE1,
      WA TYPE ZSL_PL_UPDATE1.
navigate from <CONTEXT> to <IP_SELECTION> via lead selection
    NODE_IP_SELECTION = WD_CONTEXT->GET_CHILD_NODE( NAME = `IP_SELECTION` ).
get element via lead selection
    ELEM_IP_SELECTION = NODE_IP_SELECTION->GET_ELEMENT( ).
get all declared attributes
    ELEM_IP_SELECTION->GET_STATIC_ATTRIBUTES(
      IMPORTING
        STATIC_ATTRIBUTES = STRU_IP_SELECTION ).
CALL FUNCTION 'ZBAPI_PL_UPDATE'
        EXPORTING
          GV_LIFNR           = STRU_IP_SELECTION-LIFNR
          GV_MATNR           = STRU_IP_SELECTION-LIFNR
          GV_GJAHR           = ' '
        GV_WEEK_LOW        =   STRU_IP_SELECTION-FROM_WEEK
         GV_WEEK_HIGH       = STRU_IP_SELECTION-TO_WEEK
      IMPORTING
        RETURN             =
        TABLES
          GT_PL_UPDATE       = ITAB
         DATA:
           NODE_PLANN_NODE                     TYPE REF TO IF_WD_CONTEXT_NODE,
           ELEM_PLANN_NODE                     TYPE REF TO IF_WD_CONTEXT_ELEMENT,
           STRU_PLANN_NODE                     TYPE IF_PLANNING_HISTORY=>ELEMENT_PLANN_NODE,
           WA1 TYPE IF_PLANNING_HISTORY=>ELEMENT_PLANN_NODE,
           ITAB1 TYPE TABLE OF IF_PLANNING_HISTORY=>ELEMENT_PLANN_NODE.
          LOOP AT ITAB INTO WA.
           MOVE-CORRESPONDING WA TO WA1.
           APPEND WA1 TO ITAB1.
          ENDLOOP.
       navigate from <CONTEXT> to <PLANN_NODE> via lead selection
         NODE_PLANN_NODE = WD_CONTEXT->GET_CHILD_NODE( NAME = `PLANN_NODE` ).
         CALL METHOD NODE_PLANN_NODE->BIND_TABLE
           EXPORTING
             NEW_ITEMS            = ITAB1
            SET_INITIAL_ELEMENTS = ABAP_TRUE
            INDEX                =
ENDMETHOD.

CALL FUNCTION 'ZBAPI_PL_UPDATE'
EXPORTING
GV_LIFNR = STRU_IP_SELECTION-LIFNR
GV_MATNR = STRU_IP_SELECTION-LIFNR
GV_GJAHR = ' '
GV_WEEK_LOW = STRU_IP_SELECTION-FROM_WEEK
GV_WEEK_HIGH = STRU_IP_SELECTION-TO_WEEK
IMPORTING
RETURN =
TABLES
GT_PL_UPDATE = ITAB
Problem is here
check out the type GV_GJAHR whether it accepts string type.
thanks
sarbjeet singh

Error:Type conflict when calling a function module RFC_ERROR_SYSTEM_Failure

Hi Experts,
When I run my Application in Portal, i am getting the following error.
Type conflict when calling a function module., error key: RFC_ERROR_SYSTEM_FAILURE
When I execute the BAPI, it is getting executed.
My Bapi Strucute:
Import Parameters
IM_MAT_Search --> ZPTIP_MAT --> Import Parameters
Tables
IT_INFO_REC --> ZMM_GET_ITEM --> Output Parameters
When I import the model, i am getting the structure like this
BAPI_Name > ZMM_BAPI_Input> IM_MAT_Search(respective Parameters) , Output (respective Tables and their parameters)
> ZMM_Input1> Parameters
This is the way, how i am executing in webdynpro java
Zmm_Bapi_Ptip_Search_Input eleInput = new Zmm_Bapi_Ptip_Search_Input();
wdContext.nodeZmm_Bapi_Ptip_Search_Input().bind(eleInput);
Zptip_Asset eleInputAsset = new Zptip_Asset();
eleInputAsset.setSearch("ACRS");
wdContext.nodeZptip_Asset().bind(eleInputAsset);
eleInput.setIm_Ast_Search(eleInputAsset);
wdContext.nodeZmm_Bapi_Ptip_Search_Input().bind(eleInput);
wdContext.nodeZmm_Bapi_Ptip_Search_Input().currentZmm_Bapi_Ptip_Search_InputElement().modelObject().execute();
wdContext.nodeOutput().invalidate();
Please let me know, how to do the same.
Thanks in advance.
Regards,
Palani

Hi David,
I checked for the Parameter of setIm_Ast_Search, it is of Zptip_Asset.
Hi Saleem,
When I changed the same, i am getting the Type conflict error,
Type conflict when calling a function module., error key: RFC_ERROR_SYSTEM_FAILURE
Please let me know,what can be done in this regard to solve the problem.
My BAPI Structure when imported as model
SearchBAPI
--> ZMM_BAPI_SEARCH_INPUT
> IM_AST_SEARCH(zPTIP_ASSET)
>Zptip_Asset
>Search (Parameter)
> OutPut(ZMM_BAPI_Search_Output)
>IT_Asser_Rec(ZMM_Asset)
>ZMM_Asset
>TXT100 (output Parameter)
--> ZMM_BAPI_SEARACH_OUTPUT
--> ZPTIP_ASSET
>Search (Parameter)
Thanks & Regards,
Palani
Edited by: Palani Appan on Nov 11, 2009 5:31 PM

Error Dynamic type conflict when assigning references in EHP4

Hi Experts,
We are facing problem while customizing application wizard in EHP4.
Based on our requirement, we need to create one more tab named "Notes" to add instructions for applicants while applying for Job. It contains only instruction. To achieve this, we have done below set up.
1. We have created new WD component (WD window), OTR Alias
2. Created one more additional steps in T77RCF_RM_STEP called "Notes" and maintained step 1 information
3. In table T77RCF_RM_SEQ, under Application wizard (employee), we have added notes in sequence 1.
Now our new tab "Notes" is reflecting in application wizard. But while cliking on send application, we are getting error "The following error text was processed in the system GEG : Dynamic type conflict when assigning references".
Error Details:-
u2022     The following error text was processed in the system GEG : Dynamic type conflict when assigning references
u2022     The error occurred on the application server sapgeg_GEG_59 and in the work process 0 .
u2022     The termination type was: RABAX_STATE
u2022     The ABAP call stack was:
Can anybody guide what we are doing wrong?
It would be great help.
Regards,
purnima

Hi Rajasekhar,
     Facing the same issue, can you please let me know how you solved the above issue.
Best Regards,
Laxman

Run Time: type conflicts in field symbol

In this statement i am getting run time error : assign component.
type conflicts in field symbol
FIELD-SYMBOLS:
    <fs_tab> TYPE ANY table,
     <wa_tab> TYPE ANY,
     <fs_field> type crmd_orderadm_h.
DATA:      w_data    TYPE REF TO data.
CREATE DATA w_data TYPE STANDARD TABLE OF (c_tabname) WITH NON-                     UNIQUE DEFAULT KEY.
    ASSIGN w_data->* TO <fs_tab>.
SELECT * FROM (c_tabname)
          INTO CORRESPONDING FIELDS OF TABLE <fs_tab>
LOOP AT <fs_tab> ASSIGNING <wa_tab>.
      DO.
        ASSIGN COMPONENT sy-index OF STRUCTURE <wa_tab> TO <fs_field>.
*Writeing: fs_field here*
Enddo.

FIELD-SYMBOLS: <fs_field> type crmd_orderadm_h.
<fs_field> type any.
i cannot pass "
lv_header_guid =    <fs_field>-guid.
complete code as follows.
LOOP AT <fs_tab> ASSIGNING <wa_tab>.
      DO.
        ASSIGN COMPONENT sy-index OF STRUCTURE <wa_tab> TO <fs_field>.
*i am assining fs_field-guid here. Thats why i am taking this field symbol as type "crmd_orderadm_h"*
*bold* * <fs_field>-guid.*bold**
        lv_header_guid =    <fs_field>-guid.
        iv_header_guid = lv_header_guid.
        REFRESH: lt_header_guid.
        INSERT iv_header_guid INTO TABLE lt_header_guid.
        REFRESH: im_orderadm_h,im_text.
        CALL FUNCTION 'CRM_ORDER_READ'
          EXPORTING
            it_header_guid       = lt_header_guid
          IMPORTING
            et_orderadm_h        = im_orderadm_h
            et_text              = im_text
          EXCEPTIONS
            document_not_found   = 1
            error_occurred       = 2
            document_locked      = 3
            no_change_authority = 4
            no_display_authority = 5
            no_change_allowed    = 6
            OTHERS               = 7.
        IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
      ENDDO.

Type conflict where type not found in sequence file

Hi,
from a central master sequence, I am starting several sequences from other sequence files in new executions. These sequences have individual types as input and output parameters, the types being defined within these sequence files.
The master sequence only knows the names (as strings) of these types and when I do a "Find/Replace in files" in the master sequence file looking for those types, they are not found.
However when I change one of the types in its respective sequence file while I have the master sequence file open, the master sequence file is shown with an asterisk and later I get a type conflict if the settings is to "Never allow automatic type conflict resolution". This is fairly awkward since the master sequence file is supposed to be password protected and no-one should have to touch it in a project.
What can cause this behavior?
Apparently, usage of these types spread around through all sequence files although they do not have any need for using the types from other files.
Is it possible that it makes a difference whether the type was first defined in a type palette file or directly in a sequence file?
Best regards,
Peter

Peter,
using the data type as parameter in another sequence file will include the type definition in the calling sequence file, therefore changing it. I am not sure why the Find/Replace tool does not display it, but it shows up in the types palette of the file.
When the data type is changed, it will result in a type conflict....
So when trying to reproduce the issue with TS 2010, i receive an dialog for resolving type conflict when setting to never do an automatic resolve...
Nevertheless, the calling sequence must be updated for sure if a used type is changed.
hope this helps,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

TestStand 4.0 reportgen_html.seq Type Conflict

We have converted from TestStand 3.5 to TestStand 4.0. We had created a custom reportgen_html.seq in TestStand 3.5 which we copied over to the TestStand 4.0\Components\User\Models\TestStandModels directory and updated using the Update Sequence Files utility (which is nice by the way). Everything works fine until we try enabling on the fly report generation. Then we get the following error when we run any sequence using single pass:
Details:
Type 'NI_BatchTestSocket' is invalid because it conflicts with the existing type of that name. To avoid this error message, you should open the file with the type conflict in the Sequence Editor and resave it.
The sequence file 'C:\Program Files\National Instruments\TestStand 4.0\Components\User\Models\TestStandModels\reportgen_html.seq' could not be loaded.
Error Code:
-17329; Invalid type - conflicts with an existing type.
Location:
Step 'Process Step Result' of sequence 'SequenceFilePostResultListEntry' in 'SequentialModel.Seq
If we open the \User copy of reportgen_html.seq prior to running a sequence, the error does not occur. If we view the sequence file types for the \User copy of reportgen_html.seq, the Usage column shows reportgen_html.seq twice, which is a surprise and an indication that the \NI copy of reportgen_html.seq is involved. If we rename the \NI copy of reportgen_html.seq and restart TestStand, we can run without errors without having to open the \User copy first.
We had thought that if a copy of reportgen_html.seq was in \User, then the \NI copy would not be loaded or used at all, but it looks like TestStand is trying to load both the \NI and the \User sequences. Is that how it is supposed to work? If so, it seems like we have to modify files under \NI to avoid the error. It is our understanding that we really don't want to change anything under \NI so that future versions of TestStand won't stomp the changes.
Hans

Hi Hans,
It looks like you are having two problems. The first appears to be a type conflict. You can resolve this by opening the file in TestStand and saving it. The update utility will update the files to the 4.0 format, but it won't necessarily fix any custom types.
The second problem you are experiencing is because TestStand is still loading the reportgen_html.seq file from the NI directory. I would assume that you are still loading one of our process models from the NI directory. The process models have a relative path so they will find the reportgen_html.seq file in the NI side first. Renaming that file fixes your problem because the file is not found in the local directory (which I would assume is your first search directory) but is instead found in the User directory. If you copy everything from the NI directory to the User directory and use the user files, then everything should be taken care of for you.
Matt M.
NI

Type conflict in function module parameters

Hi All,
i hve to pass dynamic field <dyn_field> into function module parameters but it's giving a dump for type conflict.
where VALUE2 data type in 'AUTHORITY_CHECK' is UST12-VON but if i define <dyn_field> type UST12-VON . then it'll give dump in *ASSIGN COMPONENT SECURITY_TABLE-FIELDNAME of structure <wa> to <dyn_field> *.
SECURITY_TABLE-FIELDNAME data type is different with UST12-VON .
pls guide me how to pass *<dyn_field> in fm parameters.
FIELD-SYMBOLS: <dyn_field> type any.
LOOP AT <DYN_TABLE_IN> INTO <WA>.
        ASSIGN COMPONENT SECURITY_TABLE-FIELDNAME of structure
             <wa> to <dyn_field> .
        CALL FUNCTION 'AUTHORITY_CHECK'
          EXPORTING
            USER                = QUSER
            OBJECT              = SECURITY_TABLE-AUTHOBJCT
            FIELD1              = 'ACTVT'
            VALUE1              = '03'
            FIELD2              = SECURITY_TABLE-FIELDNAME
            VALUE2              = <dyn_field>

Hi anuj ,,
Can you explauin the solution ..
Regards

Select options field is giving type conflict when calling a class.

hai guys,
i have a field SALESORD in subscreen as a SELECT-OPTIONS field for vbeln.
Now i created a class,with SALESDETAILS of type TABLE as a parameter of a method.
when i call the method(after creating an object) the SALESDETAILS parameter is supposed to take the SALESORD field.
but it gives me a type conflict error.
i wonder why..coz both fileds have same type..
how to resolve the issue..
helpful answers will be rewarded.
thank you.

Hi Shravan,
Pass the select-options vbeln values into a temporary table and pass this table into the method.
<b>Reward for helpful answers</b>
Satish

Type conflict in OI

Similar Messages

Maybe you are looking for