Type Definition Edition Of Print
Hello receive a warm greeting, people of this module Nomina requesting reports to print double-sided, I think for this I have to create a new type of editing it achieves read, now is in doubt as to who or transaction I think rates edition, I have no idea really how to do it.
Well thank sabría help me pay
Hola Juan Gracias verdaderamente por tu apoyo, anexo te envio la explicacion que me envio en consultor:
Para hacer ésto, deben definir un nuevo tipo de edición, por ejemplo, además de los estándares 90x120, 120x90 y los que suelen utilizar, deben definir algo así como un 90x120_DC, el cuál debe utilizar los comandos de la impresora para imprimir a doble cara (y la mayoría de los comandos que tenga la impresora)
No se si con el cambio a impresion doble cara tal como me lo comentaste funcione, de todas maneras el lunes realizare las pruebas y te comento los avances,
Verdaderamente Gracias,
Similar Messages
-
I Am looking for an app free app that will allow me to type and edit my homework. I am using a 7.1.1 version of I pad. I have a wireless printer from Walmart hp envy 4502 which is working great. Appreciate any input
Only two devices on our plan, so not so much an issue. And I have found myself using it much more than I thought I would when we got them (also first smart phones for both of us). Even got my wife to use hers for checking email while we were out of the country (big step forward for her ). I'm very interested in the ApplePay, but will want to wait a bit before diving into it. And since both phones are still in great working order, will likely wait a bit for the upgrade (sometime next year?). Will depend, I suppose, on the kinds of deals we see and what the plans turn out to be for updating my iPad and getting here one.
-
My Publisher plugin Open Type Fonts DON'T PRINT iPhoto 6.0.5 (316)
I want to post this problem in the hopes it will save some other people the 7 months of frustration I have gone through with My Publisher.
Apparently, My Publisher is unable to print Open Type fonts. After 7 months of editing and re-editing photos, scanning and re-scanning photos, and placing 13 different orders, someone at My Publisher finally called me to help with the problem. The phone call came after I had emailed Walt Mossberg of the WJS about their total lack of customer service!
After every order I placed, for the same book, was cancelled, I received the exact same form email, which said I have a corrupt photo file/.jpg and I should fix it. I kept telling them that the Mac and iPhoto don't send them any .jpgs, only a PDF file. No matter what I told them, I got the same email in reply—I have a corrupt .jpg.
Once they decided to help me (after almost 7 months), we were able to narrow down the problem within a week. They had me produce the same book on a PC, which I was unable to do because they only have about 4 templates and 6 fonts to choose from and are nothing like iPhoto. I made a book and just randomly inserted all the photos, no text. The book printed fine, proving to My Publisher that there was nothing wrong with any of my .jpgs.
I questioned My Publisher as to why the PC was limited to 6 fonts and were they installed with their BookMaker software and they said "Yes." This led me to believe my problem was with the fonts and they agreed. After talking to them further about fonts, they said they had trouble printing Post Script fonts, but they had printed several books for me that used Post Script fonts. The culprit turned out to be an Open Type font. Once I changed the Open Type font to the True Type version, the book printed perfectly. I don't know if this problem was limited to only this particular font or all Open Type fonts.
I have asked My Publisher to pursue this problem and post information about it on their website so other people don't have to go through all this frustration.
Other than this problem, I have been very happy with all the books I have received from My Publisher. The quality has been excellent. The color is a bit off in a few photos some of the time, but for the most part, the color is quite accurately reproduced, at least to my eye. Hot pinkish/purple colors seem to pose a problem.
Power Mac G4 (Mirrored Drive Doors) Mac OS X (10.4.8) 2GB RAM; Dual 1.25GHz PowerPC G4
Power Mac G4 (Mirrored Drive Doors) Mac OS X (10.4.8) 2GB RAM; Dual 1.25GHz PowerPC G4Thanks for the information. I hope to place my first order with them. I am searching for others' experiences to make sure I don't make the same mistakes.
Thanks again. -
Hello,
We have a library with several VIs (API - Interfaces to our Real Time Target). This VIs we provide to our customer to generate own VIs to control the Real Time Target.
Now we want to provide the functionality of this VI-library as DLL to our customer. The problem is, that labview use self definite name of type definitions. Also if I use "strict Type definition".
Example:
void GetOutputValues(VARIANT *Scale_In, int32_t ModelNr, uint16_t SignalID[], TD1 *errorIn, VARIANT *Scale_Out, TD2 *Data, TD1 *errorOut, int32_t len)
It is possible to modify "TD1" and "TD2"? I want to give useful names.
Greetings
SteffenHi Steffen,
Try editing the .h file as follows:
CHANGE FROM:
typedef struct {
LVBoolean status;
long code;
LStrHandle source;
} TD1;
CHANGE TO:
typedef struct {
LVBoolean status;
long code;
LStrHandle source;
} TD1;
typedef struct {
LVBoolean status;
long code;
LStrHandle source;
} LVErrorCluster;
then your GetOutputValues prototype becomes:
void GetOutputValues(VARIANT *Scale_In, int32_t ModelNr, uint16_t SignalID[], LVErrorCluster *errorIn, VARIANT *Scale_Out, TD2 *Data, LVErrorCluster *errorOut, int32_t len)
If your source-code doesn't refer to "TD1", then you probably won't need to keep the TD1 prototype!
Cheers.
"Inside every large program is a small program struggling to get out." (attributed to Tony Hoare) -
Mysterious unsaved changes in project: Class type definition stored in member VI?
Hi,
I'm wondering: why does LabVIEW show changes in a member VIs of a class when I only change the type definition (cluster) of the class in way that the member VI has nothing to do with the changes?
Example:
Class A{
int a;
int b; //new! -> changes in A.lvclass and A.ctl
incr(){ this.a++;} //why incr.vi needs to be updated/saved upon adding b?
Strangely enough, when I don't save the changes and close the project, everything looks fine after re-opening the project (no broken VIs etc.), but the issue with the unsaved changes remains.
The thing is that I don't want to upload "fake" changes into our configuration management system as my colleagues would think that I really did changes to the VIs.
Thanks!
PeterPeter,
it seems to me that the issue is connected to association or containment. Did you incorporate that in your small example?
Does it happen if you previously mass compile the VIs before you add the dummy item to the class' private data?
Currently, it seems more like a bug if indeed all items have "separate compiled code" set (e.g. in the project).
Is it possible that some single items have that option disabled? Remember: Setting the option in the LV options or the project properties, it refers to NEW items. Existing items are not changed by that "global" settings.
Norbert
EDIT: You can write a small tool to check this. Make the project path the input parameter, use VI Server to load that project and load all items and query the "separate compiled code" option. If an item has the option disabled, you might want to extend the tool to change the setting and save that item. Remember that the setting is available for more than 'only' VI-files!
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it. -
EXP hung on Exporting Object Type Definitions
Oracle 9i, Win2k3 Adv Server, Dual 2.4 CPU, 2.0 GB RAM
I'm running an exp command and it has been 'Exporting Object Type Definitions' for over 14 hrs.
The user has the same roles/privileges on another server and can export an identical db with no problem.
Any ideas?Yeah, the user does have exp_full_database.
User has connect, dba, both catalog roles, imp_full_database, and gather_system_statistics.
More info:
The export hangs when I try to do a full database export. When I try to just export a specific user, I get the following errors:
ORA-31600: invalid input value EMIT_SCHEMA for parameter NAME in function SET_TRANSFORM_PARAM
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 105
ORA-06512: at "SYS.DBMS_METADATA_INT", line 3926
ORA-06512: at "SYS.DBMS_METADATA_INT", line 4050
ORA-06512: at "SYS.DBMS_METADATA", line 836
ORA-06512: at line 1
EXP-00000: Export terminated unsuccessfully
I have run catalog.sql and catexp.sql and it isn't helping.
And no patches/updates have been done. I have also added select any sequence and it didn't help.
Any ideas?
Message was edited by:
mattyk6 -
Delay when applying large, hierarchical type definitions
Hello,
I searched around using various terms, but couldn't readily find posts on what I'm experiencing.
Has anyone else noticed huge delays when applying large, hierarchical type definitions? I've got about a dozen nested type definitions of clusters, each containing anywhere from 10 to 100 controls, and they're used throughout a large application. When I open any member of that hierarchy, make a small change, and hit apply, I see the hourglass (spinning ring of death in Vista/7) for a good two to five minutes.
A short term workaround has been to close all dependent VIs and typedefs, and then make an isolated edit. Then, if I open the whole application again, I see some compiling taking place, but it seems to take a lot less time than when the whole application is open.
I could have sworn that I read a discussion by some others commiserating about this at some point, but now I can't find it.
Has this been addressed, and has anyone heard if there's any development effort to improve this?
Thanks,
JimHi Fred,
Thanks for getting back to me on this.
> You could use more specific typedefs and not a massive one to pass data through VIs.
It's funny, I've actually adopted using larger typdefs in the last year or two for architectural simplicity, and that's when I've noticed this becoming a problem. In fact, for what it's worth, right now I'm using a data reference to store the "data dictionary" (large typedef) but that doesn't really help the issue.
From an architectural sense, it makes things easier for me because I have much fewer wires to pass around most of my data is in one place.
> Or you could pass a queue reference to the subVIs and have the queue be made of of elements that are the large type definition.
Actually, I'm using a data reference right now, which is somewhat analogous to what you're suggesting. (Maybe not? I also use queues and notifiers depending on the situation.) I haven't really seen this technique help the issue; I'm still noticing the large delays, but only when editing the typedefs.
The only way I've really found relief is to separate the large typedef into smaller ones and pass them around separately. This is kind of a pain because it means I have many more references to data structures to keep track of.
> If this is causing major problems, let me know, and I'll pass along your concerns to R&D.
Actually, if I'm to be honest, it really is starting to become a hassle. I hit apply and end up working on something else for a few minutes while the compiler chugs away. I'd be really interested in an improvement in this area. If it makes things easier, I can discuss this via email and upload an application I'm working on as an example. (Multiple large apps I'm working on exhibit this behavior)
Thanks again for your help.
Regards,
Jim -
Hello,
when I look at the "Usage" column in the Types view, am I right to assume that the first location given for a type is where the type is defined, all others where it is referenced?
Example:
Name Type Version Usage
OMS_StdQueueInput Container, Type Definition 0.0.0.4 OMS_Types.ini; OMS_LocalTypes.ini; OMSStart.seq No comment
So here I would assume, that the type OMS_StdQueueInput is defined in OMS_Types.ini and used/referenced in OMS_LocalTypes.ini and OMSStart.seq. Is that correct?
Regards,
Peter
Solved!
Go to Solution.By INI file do you mean a TestStand Type Palette File?
A new feature was added to TestStand (in 4.1 I think so you should have it) that allows you to control when automatic conflict resolution (choosing the highest version of a type silently) occurs. The setting is located on the File tab of the Station Options dialog and is called "Allow Automatic Type Conflict Resolution". In general, I recommend changing it to the slightly more restrictive setting of "Only If a Type Palette File has the Higher Version" because this will get rid of the possibility of automatic conflict resolution when opening two sequence files with different versions of a type when the type does not exist in a type palette file. But if your type will always be in a type palette file then the default setting is fine.
First, some background information.
Automatic Type Conflict Resolution - This occurs when a file is opened whose type is different from the version already loaded into memory, and the criteria for automatic resolution is met (i.e. the station option setting allows it, neither verison of the type is marked as modified, and the different versions of the type have different version numbers). When automatic resolution occurs TestStand automatically chooses the version of the type with the highest version number.
Let me know if you want me to explain other terms.
What I'd recommend for type management:
1) Create a type palette file for your standard types. Make sure all deployed and development systems are using/loading this type palette file. If you need more details on how to do this please let us know.
2) Control updates to these types using a source code control system to control updating of the type palette file(s). Ideally, only one person should be editing a type palette file at a time. Source code control systems can be used to enforce this.
3) Let your developers know that they should only edit types in the type palette files and not in individual sequence files.
4) Try to make all changes to your types and substep code backwards compatible so that old sequences will continue to work with newer versions of the types. If you have to break backwards compatibility, consider creating a new type instead and use the new type from now on, but leave the old type there for backwards compatibility (you can use flags to hide the old version of the types from the insert menu if needed).
If you use a type palette file in this way I think you will get something close to what you are asking for. With the default setting for "Allow Automatic Type Conflict Resolution", if all of your TestStand systems are loading your standard type palette files then you will either get the version in the type palette file or your will get a type conflict dialog if the version in the sequence file is newer. There will be no possibility of silently using a version other than the one in the type palette file. Is this sufficient for your needs or are you looking for something different. If you are looking for something different please let us know the specific behavior you require.
Hope this helps,
-Doug -
A realistic assessment of your experiences of hardware needed for the type of editing I do please.
Introduction:
I apologise for the length of this post but from experience of reading here, I'm working on the principle of the more I explain about myself now, the less anyone willing to help me will have to ask later.
I have lurked around this forum on and off for a few years, read the various threads in the FAQ section, particularly PPBM5 and What PC to build thread and other related topics around what system to build. I have found them very useful and in particular have enjoyed reading about Harm Millaard's experiences First Ideas for a new system. For about about 12 months I've been delaying upgrading my PC but in Mr Millard's latest updates on his PPBM6 site he talks about new systems and provides a link to Intel's time line which suggests they are in no rush to replace the i739xx series CPU chip - which has I believe amongst other things 2 cores disabled. Normally bitter experience has taught me not to rush out and buy the latest technology but let others "test" it first and then benefit from reduced prices as that model is replaced. However, it now seems like last years technology is going to remain as this years technology and probably the first 2 quarters at least of next year and, if anything, the price of the i739xx series is at best staying at it's existing launch price or even rising. So it's time to take the plunge for me and upgrade.
My current hardware for editing:
I started with Premier 6.5 after I bought it as part of a bundle with a Matrox RTX 10 card - one of the most temperamental pieces of hardware I've had the misfortune to work with. I later upgraded to Premiere Pro 1.5 and edited with that using a Pentium 4 2.6 (overclocked to 3.2), 3 hard drives (no raid) and 4G of memory. The video footage used was avi recorded using a Canon MVX 30i and Panasonic NVGS27 and now I've added the Casio Exilim EX -FC100 (mpeg format) and a Panasonic HDC S90 (AVCHD).
My PC coped with the editing I did with avi footage but couldn't handle AVCHD format and this convinced me to upgrade to Premiere Pro CS5.5. At the same time I switched to editing on a Dell XPS M1530 (Centrino duo chip) - I upped the memory to 4GB, put Windows 7 64 bit home edition on and replaced the existing hard drive with a faster one. In addition I use a SATA Quickport duo attached to my laptop via an eSATA card. However, either the Quickport, eSATA card or XPS is extremely temperamental - I never see two external hard drives, 50% of the time see 1 external drive or none at all - when that happens I edit around it doing things I can with just the one internal drive - but this problem is not my question.
The type of editing i do:
I know people usually say around here not to try editing on laptops and believe me, I understand why, but using this setup I have been able to edit lots of videos - see here for examples of the type of editing I currently do:
http://www.youtube.com/user/PathfinderPro
The equipment test videos place the biggest strain on the hardware when editing. And, to do this editing I have to convert my AVCHD footage in to it's YouTube format before editing and even after I've done that it can be tediously slow to edit and playback even with premiere set to play at 1/4 normal quality. To convert the AVCHD footage to the YouTube format I edit in has to be done over many nights.
Now I am not a professional, I typically edit with up to 4 tracks of video with additional tracks for titles and my target audience is YouTube - which is why I can get away without editing in my prefered option of native AVCHD video format. However, I'm tired of all the waiting, stuttering, and many many days and hours of converting videos into a format I can use so I'm looking to upgrade. My problem is though I'm uncertain what path to take. The PPBM results are dominated by overclocked chips, and whilst the motherboard make and model is listed, the hard disks used, graphic card makes and models and memory modules are not. This is not a criticism of the PPMB tables (big thank you to Bill Gehrke & Harm Millaard for taking the time and effort to pull this much information together) but for me, I am not interested in being in the top 1000 in the world, nor overclocking like mad, and having had horror experiences of using matrox products and compatibility and stability issues with other hardware I'm more interested in compatability and practicality than speed when deciding what to build. I've also read the threads about marvel controllers, dual and quad channel memory support, the pro's and cons of SSD or standard drives, raid setups, the heat problems with overclocking the newer ivy bridge chips and general build advice etc so I'm not coming here without having done some reading first.
The type of system I'm thinking of:
So far based on what I've read here, I've come to the conclusion - but I'm open to suggestion:
- Chip - regrettably due to the cost and unlikely successor anytime soon - a 39xx (with appropriate cooler) because I want to edit in native AVCHD which seems to require the warrior type chip as opposed to the "economical" build regardless of what my target audience is and this suggests
- X79 motherboard (which must have an old PCI slot such as the Asus Sabertooth and which has room for the cooler I'm considering). As I will be carrying over my old terretec DMX 6 fire 24/96 soundcard - all my videos have their audio mastered in Audition using this card - best piece of advice I read was the audience will watch a bad video with good sound editing but not the other way round)
- 4 hard drives plus additional hard drive for operating system using onboard raid controllers (not sure whether the operating system drive will be WD caviar black or SSD and can't justify cost of external raid controller for either my type of use or number of hard drives being used)
- Video card - I can now buy a GTX 580 for less than the 670 - so not sure on the card especially based on Harm Millards observations that memory bandwith seems to be as important as CUDA cores
- Case - I have an Akasa 62 case with room for 5 hard drives - I won't be exceeding that, and if I overclock it will only be by a little so is it really necessary to replace it for a Tower Case - although I would prefer a case with a front connection for esata so I may have to change the case regardless
- Maximum memory 32G - so is it necessary to upgrade to windows 7 professional?
- Power source - I'll work out when I've decided on my components.
Help please:
For me it's video source/dictated software chosen and hardware/audience(youtube) dictates format edited in. As I don't intend to change my camcorders format (AVCHD or mpeg) in the next couple of years and I'm not interested in having the "fastest" system around what I'm really interested in learning is:
what system setups people use now for doing similar editing to me
what make/models of the component parts in your system work well together
and if you do have a bottle neck in terms of hardware, where is it and what hardware would you change to (not a dream model change, just a practical and realistic one)
I have deliberately not given a budget for the changes I'm intending because budget should not be the deciding factor in determining what I "need" to upgrade to for the "type of editing I do" - especially bearing in mind I've got by so far (admitedly at a tortoise pace) with by todays standards a standard spec laptop. Basically I don't want a Rolls Royce to go shopping at Wallmart but I'm tired of walking there and carrying everything back by hand!
Thank you very much for any help / experiences people can share.Thank you both for your prompt and helpful replies.
Mr Millaard, regarding your excellent article Planning and Building an NLE system, I have read it a couple of times now and it was your article which finally convinced me the time was now to upgrade but within it you said for good reason "Initial choice of CPU: i7-39xx with the intention to overclock to 4.6 - 4.8 GHz", hence my uncertainty about the CPU to use. I have seen a video you posted here - I think it was based on your cats (which I incidently enjoyed) so working on the editing done there (but not remembering if you mentioned what video format you used) and others who have mentioned many pro's for the i7-39xx I was leaning towards that - but I'm financially relieved at least - if the i3770 will do, although now with the possible recommendation by JEShort01 (sorry not sure of the forum etiquette for use of names) of the 2600K overclocked I'm a little bit back in the position of which is more suitable especially with the update to the i3770 being nearer than i7-39xx. This still makes me lean towards the i7-39xx.
Regarding the editing, the match play you can see on the channel is indeed 1 camera basic edits - multiple titles used to provide the score board. However, the coaching videos use mulitple cameras - 3 to 4 sometimes (another reason for upgrading to CS5.5 for the multi cam editing support) and the equipment testing video can use 3 or 4 tracks layered on top of each other other with each track having opacity settings and multiple motion effects and titles with occasional keying video effects added. For example this video at approx 2 mins 50 and 5 mins 10 seconds.
http://www.youtube.com/watch?v=T1E5T7xo57c&list=PL577F7AB5E31FC5E9&index=13&feature=plpp_v ideo
Monitor wise I use dual monitor setup. My laptop screen and I link out to an LG M2394 D for widescreen and I sometimes use an old Neovo F-419 for 3 / 4 editing. I won't be using more monitors than 2. If the 580 drops a bit more I'll probably go for that - although I'll have to make sure it's size isn't an issue for the motherboard combo setup. Interestingly there is a thread shown on the forum home page which discusses the 570 vs the 660ti and the opinion was go with the 660ti which surprised me a bit.
Windows 7 professional it is then - I should have known that too - apologises for asking a question already asked.
"Accepted, your correct criticism of the lacking hardware info on the PPBM5 website. That is the overriding reason that for the new site http://ppbm7.com/ we want to use Piriform Speccy .xml results to gather more, more accurate and more detailed hardware info."
No criticism intended Mr Millaard - more an observation and I really look forward to that evolution with PPBM7. I'm assuming the .xml results will use pre populated drop down lists people can select their hardware from - that way you can control and ensure consistent entries - downside being the work required by you to populate the lists in the first place and maintain them.
Thanks again for your help but I'm still unsure a bit about the CPU and video card though. -
How do I convert an e-mail into a Word file that can be edited and printed?
I received an e-mail from a relative that I want to convert into a Word file that can be edited and printed?
Go to appleid.apple.com to manage the ID, sign in. If you are using two-step verification on the ID, select the Name, ID and Email Addresses section, then change the birth date on the bottom right. If you are using security questions instead of two-step verification, select the Password and Security Question and answer the two security question to access and change the birth date. At the present time you may not be able to enter the correct birth date, but you should be able to change it to 1/1/2001, which will have child ID status.
-
How to layout a page in numbers 3.0 -- I can't edit in print view
How to layout a page in numbers 3.0 -- I can't edit in print view any more. I am using the new version and miss the show print view mode.
The recipe for my tables:
1-write a line (begining page 1) (5 pixel width)
Begin x=1 y=1
End x=903 y=903
2- write a line (begining page 2) (5 pixel width)
Begin x=1 y=1213
End x=903 y=1213
3- write a line (begining page 2)
Begin x=1 y= 2425
End x=903 y= 2425
etc
Print and set autoadjust off and 60% -
Hi everybody,
I'm looking for tips, pointers,directions... to be able to perform this operation in TS 4.0 sequence Editor, if it's even possible...
I'm managing a test system with a "home-made" virtual instruments abstraction Layer complementary to IVI classes for instruments which do not have classes defined, customizing the sequence editor accordingly for developpers of my department.
So basically when the instrument is IVI, the developper uses the built-in IVI step-type type and when it is not, he uses the the custom step types that I developped for this particular class of instruments.
However there are classes where I do have both IVI and specific drivers available and I do need to use both in the test sequence.
For example let's say there are two sources of DC power available in the testbench, one being a programmable IVI compliant DC power supply, and the other one composed of fixed "blocks" of DC power supply managed by externals relays and you need to use them both in the test sequence.
What I would like to be able to do in the sequence editor is inserting the appropriate step type at edit time just by selecting the source of power supply (by a ring or enum for eg), and if the first ressource is selected, it inserts IVI step type, and if the second ressource is chosen, it inserts the appropriate custom step type.
Any Ideas on how to accomplish this ?
Regards,
Cyril
Cyril Bouton
Active LabVIEW Developper
Solved!
Go to Solution.Hello Cyril,
Here is an idea that could be done:
You could create a dynamic step by having a step that holds all the properties for both configurations (the superset of the necessary variables) and an extra one that indicates which 'mode' the step is in. Then you create the main Edit substep in whichever language you desire. That substep window will then have a box/dropdown/etc. at the top you can use to choose between modes A & B. When the user changes the value, you would dynamically change the rest of the window to contain the appropriate properties for mode A or B. You then copy the property values in that window to the Step properties, and copy the mode to your variable and you can run the step in that mode. When the step then runs, it checks the mode variable, and depending on its value, it will run the step in mode A or B.
Now we could add a dialog that allows us to choose when we put a step down but we should still allow the user to change later via the Edit substep we create.
I don't think we can create something that inserts a completely different step, but we can have one step that has the ability to do both and we can pick which one we execute. Also note we still don't have the ability to edit the Panels for a step, so we have to use a new window that we call from our Edit substep to complete the step.
Hope this helps.
Regards,
Olivier L. | Certified LabVIEW Developer -
What's wrong with this content type definition?
Could someone tell me what's wrong with this content type definition? When I click "New Folder" in a custom list, it should bring two fields 1) Name 2) Custom Order. However in my case when I click new folder, I see 1) Member (which is totally
weird) 2) custom order. Where is it getting that Member field from?
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<!-- Parent ContentType: Folder (0x0120) -->
<ContentType ID="0x012000c0692689cafc4191b6283f72f2369cff"
Name="Folder_OrderColumn"
Group="Custom"
Description="Folder with order column"
Inherits="TRUE"
Version="0">
<FieldRefs>
<FieldRef ID="{35788ED2-8569-48DC-B6DE-BA72A4F87B7A}" Name="Custom_x0020_Order" DisplayName="Custom Order" />
</FieldRefs>
</ContentType>
</Elements>Hi,
According to your post, my understanding is that you had an issue about the custom content type with custom column.
I don’t think there is any issue in the content type definition, and it also worked well in my environment.
Did you have the Member field in the project?
I recommend you create a simple project only with one custom Order column and one custom Folder_OrderColumn, then you can add more fields one by one.
By doing this, it will be easier to find out the root cause of this error.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support -
Dynamic Variable In a Type Definition
Can someone tell me how to define and use a dynamic variable, which resides in a Type Definition. I.E...
Type: beg of type1,
field 1 type c,
field 2 <---this dynamic
field 3 type c.
end of type1.
Can this be done in Netweaver 2004. And if so, can you show me how?
Thanks for your time.
Kind Regards,
JasonDon't think it is available now, but I do believe they are working on this for a future release.
Regards,
Rich Heilman -
Bind FPGA host reference to type definition in labVIEW 2012 crashes labVIEW
Hi,
I am using FPGA target device 5641R and labview FPGA 2012 with 5640R ver 1.7.
On the configure window of open FPGA VI reference function, choosing the dynmaic mode shows broken arrow when wired to the 5640R configuration VIs (i.e. Configure timebase, Configure ADC default, Configure ADC NCO functions). So i tried the other option which is binding the FPGA host reference to type definition and choose the control from path C:\Program Files\National Instruments\LabVIEW 2012\instr.lib\ni5640R\Configuration\NI-5640R VIs\ni5640R FPGA VI Reference.ctl. But after that when i try to save the VI on which open FPGA VI reference function is placed, labVIEW crashes. I am unable to figure out the reason. Earlier I was working with labVIEW 2011 and it was working fine there. Any suggestions would be highly appretiated.
Please see the attached images for more details.
Thanks
Attachments:
1.png 33 KB
2.png 71 KB
3.png 40 KBCheck out this thread. It looks like someone else ran into a similar issue and made changes that fixed their application.
http://forums.ni.com/t5/IF-RIO/correct-5640r-template-use-recommendation/td-p/1331918
Jeff B.
Applications Engineer
National Instruments
Maybe you are looking for
-
How to send e-mail alert to the user job is successful or failed.
Hi Experts, I have scheduled a job using DBMS_JOB Package; in this job I am calling a procedure. How can we send an e-mail(alert) to the user if the job is successful (or) job fails. If the job is successfully completed, then we have to send mail as
-
How to omit a blocked bin from issuing materials to a reservation
Hi All Is there some standard config that will allow me to 'hide' the stock held in a warehouse bin when I process and MB1A movement type 281. Problem: After processing the MB1A I look into LB10 and try to process the pick but the stock is 'unavailab
-
Hi, I have installed vmware 5.5 hypervisor on hp G8 microserver. I have created one vm as windows 2008 R2. I have also install vmware workstation 11 on this vm. In this workstation when I tried to run vmware 5.5 hypervisor I come across "This virtual
-
I have Tiger (MacOS X 10.4.4) running on my iMac G5. I just tried to run a Classic application and the system complained that I didn't have a version of MacOS 9 installed that supported Classic. I do have a System Folder that contains some version of
-
How do I get a jpg file to attach in Mail rather than just showing the picture file itself in the body of the e-mail